I have table in Oracle with one column PRODUCT. Column PRODUCT have following values -
Account Management Active Directory Adobe Acrobat Reader NT Account Application Security
[code]....
I am designing application where I need to search for PRODUCT based upon user's input. Lets say user wants search on 'Laptop Account Broken'. I want to search for all products which contains any of words in user's input. So based upon user's input I want output like below.
Expected Output:
Account Management NT Account WebSite Account HP Laptop
I have a table emp where empid,employee name,job,salary are three columns.I need to retrieve empid,count of emp,emp name,emp salary of job = manager and total salary of all employees with grouping by job in one query.
earlier the query was running on same record group but i hav to delete some code so i did but after made such changes itreturns this error.but still query is correct i complied on toad.
that I need to insert into Child using seq_parent but I want to insert the same sequence for each group of rRef. I dont know how to do that using SQL not PL/SQL.
I have a report with 2 groups Gheader and Glines.The report looks at PO headers and lines. I want to create a data link from the the 2 queries based on the line id in po_lines_all.However I only want to select this in the lines query so I do not get repeating records at the header query.
I'm trying to group sets of data based on time separations between records and then count how many records are in each group.
In the example below, I want to return the count for each group of data, so Group 1=5, Group 2=5 and Group 3=5
SELECT AREA_ID AS "AREA ID", LOC_ID AS "LOCATION ID", TEST_DATE AS "DATE", TEST_TIME AS "TIME" FROM MON_TEST_MASTER WHERE AREA_ID =89 AND LOC_ID ='3015' AND TEST_DATE ='10/19/1994';
[code]....
Group 1 = 8:00:22 to 8:41:22
Group 2 = 11:35:47 to 11:35:47
Group 3 = 15:13:46 to 15:13:46
Keep in mind the times will always change, and sometime go over the one hour mark, but no group will have more then a one hour separation between records.
I am trying to use the Oracle Sum() to get a grouping by DATE, LOCATION, SUM(PROD1+PROD2) for DATE periods 10/12/2011 and 11/12/2011. Below is the desired end result.
Stored Procedure: Receives the MFR and PRODUCT identifying the product sold as well as the Quantity purchased by the customer.
Calculates the value of the product sold (looks up the cost of the product in the products table and multiplies by the quantity sold) Returns the calculated value.
I read that rownum is applied after the selection is made and before "order by". So, in order to get the sum of salaries for all employees in all departments with a row number starting from 1, i wrote :
select ROWNUM,department_id,sum(salary) from employees group by department_id
If i remove rownum, it gives the correct output. Why can't rownum be used here ?
Is there a way to find customers purchased only single product from the following table?
cusno Product Date ----- ------ ---- 121 ES 03/12 121 NT 30/12 131 ST 03/12 13 WT 04/12 150 ES 05/12 150 ES 06/12 150 ES 07/12 160 MN 05/12 160 ES 06/12 160 ES 07/12 162 NT 08/12
I need a query to display only 150 and 162 as they have purchased only one product.
so here is the query : For every state, list the most popular product. Here is the query I have so far :
SELECT C.State, P.Product_Name, Count(*) cnt FROM Product P, Customer C, OrderTable O, LineItem L WHERE C.CID = O.CID AND O.OID = L.OID AND L.PID = P.PID GROUP BY C.State, P.Product_Name;
Result : STATE PRODUCT_NAME COUNT(*) ---------- -------------------- ---------- New Jersey Computer 3 Texas Computer 1 New Jersey Speaker 2
I would need the result to only say New Jersey Computer and Texas Computer because I only want a list of the states with the product name that is sold the most in each state.All I need to do is have the query only select the product name with the max count for each state...
I have oracle10g installable in .rar format. I have unzipped it and started installer through setup.exe file, but in the secnd step itself it is asking product.xml file location , i searched entire installables but could not find any thing with such name, installing this oracle 10g on windows 2003 server.
However, I'd also like it to return any product that doesn't have a TEST_UOM_GROUP, for example the 'Bud'.I've hit a brick wall and just keep going around in circles and not acheiving the result I'm after!how to either change the SQL Query.
I have just migrated my database from oracle7 to Oracle9i. My application is still on forms 4.5 and reports 2.5.
i am having a problem after the migration. I am able to run my forms, but i cannot run my reports from my form (button). i am having the error : "frm-41211 integration error: SSL failure running another product". I want to mention that i am able to run the report from the report builder.
I was practicing on Recursive Subquery Factoring based on oracle examples available in the documentation URL....I was working on an example which prints the hierarchy of each manager with his/her related employees. Here is how I proceed.
WITH tmptab(empId, mgrId, lvl) AS ( SELECT employee_id, manager_id, 0 lvl FROM employees WHERE manager_id IS NULL UNION ALL SELECT employee_id, manager_id, lvl+1 FROM employees, tmptab WHERE (manager_id = empId) [code]....
107 rows selected.
SQL> However, by accident, I noticed that if instead of putting a comma between the table names I put CROSS JOIN, the very same query behaves differently.That is, if instead of writing
UNION ALL SELECT employee_id, manager_id, lvl+1 FROM employees, tmptab WHERE (manager_id = empId)I write . . . UNION ALL SELECT employee_id, manager_id, lvl+1 FROM employees CROSS JOIN tmptab WHERE (manager_id = empId)I get the following error message ERROR at line 4: ORA-32044: cycle detected while executing recursive WITH query
I remember, oracle supports both comme notation and CROSS JOIN for Cartesian product (= cross product). For example
SQL> WITH tmptab1 AS 2 ( 3 SELECT 'a1' AS colval FROM DUAL UNION ALL 4 SELECT 'a2' AS colval FROM DUAL UNION ALL 5 SELECT 'a3' AS colval FROM DUAL 6 ), [code]....
SQL> So if both comma notated and CROSS JOIN have the same semantic, why I get a cycle for the above mentioned recursive subquery factoring whereas the very same query works pretty well with comma between the table names instead of CROSS JOIN? Because if a cycle is detected (ancestor = current element) this means that the product with CROSS JOIN notation is generating some duplicates which are absent in the result of the comma notated Cartesian product.
"Integration error: SSL failure running another product" with HP Deskjet D2680.We are using 10gR2, Forms6i, and Report6i. The server is Windows 2003 Server, and the OS of the printer is XPIn one of our module, upon calling one report we always encounter Integration error: SSL failure running another product. Sometimes when we do not encounter it, the spooling takes too much time and it takes 6minutes just to print the first page of the report, succeeding pages takes 2-3minutes in interval.
At first we thought that the memory of the PC is the problem, but we tried to connect it to a 2gig RAM Win7 laptop, another laptop with 1gig RAM XP, and a 1g RAM Desktop. We tested 5 computers but the same problem occurs.
The problem is not encountered after we tried other HP Printer(HP 3940, 6988, & D4360). I just want to know the problem with the HP Deskjet D2680.
in oracle instalation when Product-Specific Prerequisite Checks window appears it show me theres a warning with checking network configration as shown in pic.theres a sites says that its not necessary to make it succeeded and its ok to leave it. should i leave this warning or it should be succeeded?
I have got 2 users as user1 and user2.I have used the following statements from user 'user1':
create role GENEVAOBJECTS; grant select, insert, update, delete on PRODUCT to GENEVAOBJECTS; grant GENEVAOBJECTS to user2;
In the above statements, product is a table. Now, I could able to access this table from user 'user2'. But however if I write a procedure in user2 schema accessing the table product, then the procedure is not getting compiled.
create or replace procedure test_prc as v_test number(9); begin select product_id into v_test from PRODUCT where rownum=1;
Data block 1- master_blk : For date/customer of sale invoice Data block 2- detail_blk1 (detail of the master block - For products and qty) Data block 3- detail_blk2 (detail of DETAIL_BLK1 For entering serial numbers of products)
My requirement is that whatever quantity user enter in data block 2 against each product he must enter equal number of serial numbers of that product in data block 3.
For this I have created on item (cnt_iteml : to count product's serial numbers in block3 ) in data block 2, and on summary item (t_serial_no ) in block3.
Whenever user changes in quantity, cnt_iteml: item is populated with t_serial_no in block3 of that product by following trigger on quantity column.
Following trigger is written on block level at data block-3 to populate cnt_iteml with t_serial_no. PRE-RECORD
IF GET_BLOCK_PROPERTY('SERIAL_NUMBERS',STATUS) IN ('CHANGED') THEN :stock_transactions.cnt_itl:=:serial_numbers.t_serial_no; END IF;
Above triggers are fulfilling my requirement except following condition.
If user after entering serial numbers in block 3 and without saving goes back to block2 and try to navigate to another record he gets a message asking him to save changes by forms. At this time if user presses no then cnt_itl item is not been populated with t_serial_no item's value.
What I want in above condition is that if user was inserting new record cnt_it item should be populated with 0, so that he shouldn't be able to save this record. And If he was updating then cnt_itl item should be populated with actual no of records in database against that product.
There is a requirement in my database that I want to restrict the user from directly running queries on database from third party tools such as pl/sql developer and toad.
There is a utility in SQL product_user_profile through which this can be done but it is only restricted if you run the query through sql plus. If I want to restrict and (give suppose select,insert) to a user for directly running queries through PL/SQL.
