RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 09/06/2010 12:36:47
ORA-19715: invalid format F for generated name
ORA-27302: failure occurred at: slgpn
I have a problem when trying to create a PLSQL function based on an XML extraction query.
I have three dummy tables:
SQL> get create_address
1 create table ADDRESS
2 (
3 id NUMBER not null,
4 house_number NUMBER,
5 house_name VARCHAR2(20),
6 street_name VARCHAR2(30),
[code]....
And the following dummy data for these:
1 insert all
2 into ADDRESS (ID, HOUSE_NUMBER, HOUSE_NAME, STREET_NAME, CITY, COUNTY, POSTAREA, POSTSTREET)
3 values (1, 1, '', 'Tube Street', 'Norwich', 'Norfolk', 'NF12', '2DF')
4 into ADDRESS (ID, HOUSE_NUMBER, HOUSE_NAME, STREET_NAME, CITY, COUNTY, POSTAREA, POSTSTREET)
5 values (2, 5, '', 'Dave Street', 'Edlington', 'Kent', 'CT34', '8GH')
6 into ADDRESS (ID, HOUSE_NUMBER, HOUSE_NAME, STREET_NAME, CITY, COUNTY, POSTAREA, POSTSTREET)
[code]....
So far so good then. But, what I want to create is a function where I can pass in an id value and return the corresponding XML CLOB.
So I try, very simply, this:
SQL> get get_xml_data
1 create or replace function get_xml_data(p_id in number) return clob is
2 Result clob;
3 begin
4 select xmlroot(xmlelement("HomeData",
[code]....
And, alas, i'm greeted by this:
SQL> /
Warning: Function created with compilation errors.
SQL> sho err
Errors for FUNCTION GET_XML_DATA:
LINE/COL ERROR
-------- -----------------------------------------------------------------
4/5 PL/SQL: SQL Statement ignored
24/63 PL/SQL: ORA-00932: inconsistent datatypes: expected NUMBER got -
SQL>
I've tried to redo the query in several different ways but so far nothing.
I was wondering with dba_constraints and i found unexpected result shown as below
select constraints_name, constraint_type from dba_constraints
constraint_name constraint_type
SYS_C00141 c
SYS_C00142 c
SYS_C00143 c
SYS_C00144 c
SYS_C00145 c
SYS_C00146 c
SYS_C00147 c
SYS_C00148 c
SYS_C00149 c
i jst want to know that what is this system generated constraints ?
The trace directory is full of trc files with the text below:
--------Dumping Sorted Master Trigger List --------
Trigger Owner : INPUT
Trigger Name : CUS_TST
--------Dumping Trigger Sublists --------
There is like a file generated every minute, and i cant stop it from happening.I have tried setting the trace_enabled parameter to FALSE but no success.
i just noticed on my 11g database - no AWR snapshots are generated.
View 4 Replies View RelatedForms 10g is insatalled recently on my machine. New form is developed,when we run the form it generates FMX file for the same but output is not dispalyed. The output window get closed automatically.
View 3 Replies View Relatedin eache record we are receiving information from differente city, we pretend to get an output where we have a row for each city (delimited by comma) that we have in column CITY
Input data
SELECT '1001001' as CLIENT_ID, 'LONDON, PARIS' as CITY, TO_DATE('20101105', 'YYYYMMDD') as DT_REG FROM DUAL UNION
SELECT '1022201' as CLIENT_ID, 'MADRID, OSLO' as CITY, TO_DATE('20101105', 'YYYYMMDD') as DT_REG FROM DUAL UNION
SELECT '1033001' as CLIENT_ID, 'PARIS' as CITY, TO_DATE('20101105', 'YYYYMMDD') as DT_REG FROM DUAL UNION
SELECT '1033004' as CLIENT_ID, 'MADRID, OSLO, PARIS' as CITY, TO_DATE('20101105', 'YYYYMMDD') as DT_REG FROM DUAL
Output expected
CLIENT_IDDT_REGCITY
100100105/11/2010 LONDON
100100105/11/2010 PARIS
102220105/11/2010 MADRID
[code]...
How to find out how much undo will be generated by a dml / ddl statement in Oracle 9i? With Oracle 10g we can use the famous mystat.sql and mystat2.sql with argument as 'undo change vector size'.
However with Oracle 9i there is no statname as 'undo change vector size'
Is there any way to get the amount of redo generated in last 2 hour. which has below chareteistic
1. redo generated by currently connected session from last 2 hour.
2. redo generated by session disconnected during last 2 hour.
total_redo = disconnected sessoin during last 2 hour + connected session generating redo during last 2 hour.
in our database 10.0.2.4 with RAC archive log generated each 4 min , did this increase the performance of database and how i can fix it
View 14 Replies View RelatedI am facing issue with my sequence number about sequence number generated..I want it to follow the sequence all the time, i.e. it should take next incremental number to last generated seauence, but it generates random one all the time, i.e
s.nextval() = 4
s.nextval() = 5
s.nextval() = 10
s.nextval() = 543
s.nextval() = 544
My sequence defination is as below
CREATE SEQUENCE s
START WITH 1
MAXVALUE 999999999999999999999999999
MINVALUE 1
NOCYCLE
CACHE 20
i have faced one problem with reports. i had created 4 reports. recently we are designed new application using oracle forms6i. we are created more than 10 forms and added to application they were working fine. but when i was added these reports they are not generated. but in server report are running. i mean the report genereted in server but not in local system.
View 4 Replies View RelatedLets say you're making upa school database and you awnted to give the students each a unique student number generated by thesystem.
View 2 Replies View RelatedI have found there is a wearied of email generated from my database. I have the data base server located in US (estern time) and the sysdate in the database is AUSTRALIA (AEST). But i am working from India (IST).I have one procedure, which will send email to some recipients once the job is done. It is using UTL_SMTP for sending the email from database.
Now problem is, the email i got from this procedure has a different timestamp which is NOT matching to any of the times:
Time in Mail : 2-Nov-2012 9.56 PM
IST Time : 2-Nov-2012 10.56 AM
Easter Time : 2-Nov-2012 01.30 AM
AEST Time : 2-Nov-2012 4.30 PM
Is there a way to show the sql statements generated by the Forms?
View 4 Replies View RelatedAs we know that, MV is generating more redo logs during the FAST refresh. but i need more clarifications on that.
see the below examples:
exec dbms_mview.REFRESH ( LIST => 'mv_test', method=>'F');
PL/SQL procedure successfully completed.
select a.name, b.value
from v$statname a, v$mystat b
where a.statistic# = b.statistic#
and a.name = 'redo size';
NAME VALUE
---------------------------------------------------------------- ----------
redo size 147144
see the redo size is 147144 bytes. Immediately, i refreshed in MV view. now there is no update or insert or delete stats happened in source tables. but i do see redo log generation is high for NO DATA refresh.
select a.name, b.value-147144
from v$statname a, v$mystat b
where a.statistic# = b.statistic#
and a.name = 'redo size';
NAME VALUE
---------------------------------------------------------------- ----------
redo size 42352
For no rows refresh, it takes 42352 bytes.. why oracle generated redo logs when there is no DML operations happened in source table.
We are using the function dbms_utility.get_hash_value to create a unique identifier, the hash is created based on statement of creating an index. We see that for a different statement is being generated the same value, which in this cause errors because this value must be unique.
The Hash is to be calculated as follows HASH_VALUE = dbms_utility.get_hash_value (sql_text, a 10000)
We are using the correct the hash function or should we use another way to generate unique values?
My need is to view sql statement and its explain plan generated by client (Business Objects). How do I perform it? Since it's developer's server I have sufficient rights, I just don't know particular table name.
View 2 Replies View RelatedCustomer is running a Job from a Schema which is generating multiple sessions . I want the all the sessions to be traced from that particular Schema .
View 4 Replies View RelatedI have a problem with Dynamic SQL.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it.
But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
find below the sample code:
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
v_table VARCHAR2 (4000) := NULL;
v_where VARCHAR2 (4000) := NULL;
v_ins_tab VARCHAR2 (4000) := NULL;
v_insert VARCHAR2 (4000) := NULL;
v_ins_query VARCHAR2 (4000) := NULL;
[Code]...
How to fetch the column names here
|| ');';
EXECUTE IMMEDIATE v_ins_query;
END LOOP;
I have written an SQL which will dynamically generate the Select statement with from and where clause in it. But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
find below the sample
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
[Code].....
in the dba_tab_privs we can find some entries like this:
SELECT *
FROM dba_tab_privs
WHERE GRANTEE IN ('XXXXXXXX')
GRANTEE OWNER TABLE_NAME GRANTOR PRIVILEGE GRANTABLE HIERARCHY
XXXXXXXX YYYYYYYYYYY SYS_PLSQL_71964_26_1 YYYYYYYYYYY EXECUTE YES NO
Those grants were generated automatically by oracle. Is there any way to prevent Oracle to grant them? An external audit-rule tells us not to give any grant directly to user - we always have to use databaseroles.
when i install oraclexe on my system..when i want to connect the oraclexe then it give error
D:oraclexeapporacleproduct10.2.0serverBIN>net start OracleXETNSListener 'net' is not recognized as an internal or external command, operable program or batch file.
D:oraclexeapporacleproduct10.2.0serverBIN>net start OracleServiceXE 'net' is not recognized as an internal or external command, operable program or batch file.
D:oraclexeapporacleproduct10.2.0serverBIN>c
when i check this path D:oraclexeoradataXE then i check datafiles not generated in this folder
I need to calculate the redo log volume generated by certain tables. If I have 100 tables in the database I need to know only 25 tables redolog vloume per day. How I can calculate this , Is the log miner useful on this issue.
View 6 Replies View RelatedDB version: 11.2.0.3
I have enabled the below trace event before running query on my session.
ALTER SESSION SET events = '19027 trace name context forever, level 0x1000';ALTER SESSION SET tracefile_identifier = store_trace;
Then I ran my query, and upon the finishing of the query, I ran the below to disable trace.
ALTER SESSION SET events = '19027 trace name context off, level 0x1000';
Now I checked back on the trace folder in my Oracle DB directory structure, but cannot find any file created by using the above set tracefile_identifier. I had previously run the query with "sql_trace" ON with tracefile_identifier, and successfully got the tracefile generated by using the identifier.
how to know that report is generated successfully because i want to one flag only if report is generated successfully other wise no need.
View 3 Replies View RelatedI wanted to know how to find the links between cursors that have been created in v$sql after compiling a PLSQL procedure.
For example, if i compile the following procedure :
create or replace
PROCEDURE PROCEDURE1
AS
BEGIN
insert into t values(1,1);
END PROCEDURE1;
, the 2 following cursors are created in v$sql :
select SQL_ID, SQL_TEXT from v$sql
where sql_id in ('71pj8t5nz1d80','2s567zb6684sh');
"SQL_ID""SQL_TEXT"
"2s567zb6684sh""BEGIN PROCEDURE1; END;"
"71pj8t5nz1d80""INSERT INTO T VALUES(1,1)"
Thus, i would like to know how to find that the cursor 71pj8t5nz1d80 is called/linked by the cursor 2s567zb6684sh.
This would be useful for interpreting some sql statistics in v$sqlstats in where such cursors appear and related sql statistics are accounted twice.
I am working on Oracle forms 6i. I am getting a problem when I am trying to save the value in the form.
Well the scenario is like this:
I have got a multi record block. In that block there are two items jobno and inoivce no. Both the items have an LOV attached to them giving jobnos and invoice nos respectively.
This is on the '*ORIGINAL_BLOCK*'.
The problem perists with the jobno field. In the LOV for jobno, the 'column mapping properties' property, the return item section has original_block.jobno as the value. The code to fetch the details about the jobno (like vendor no,vendor site,invoice no etc) has been written on the When-Validate-Item trigger. I am also updating the WHO colums(like created by,created date,last upated by, last update date) on the Pre-Insert trigger at the block level. This whole thing of fetching the records is working fine. But when I simply press the save button an extra blank line gets generated on the form as well as at back end with jobno like this:
Sr.noJOBNO vendor_no vendor_name invoice_noinvoice_date
1 123 37456 abc 4564565 26-APR-2013 --- correct entry
2 123 8574 xyz 645656 26-JAN-2013 --- correct entry
3 123 --- --- --- --- unrequired blank entry
A same jobno can have multiple number of invoices. So the lines getting generated are - number of lines + 1(unrequired entry).As in the above scenario there are only 2 invoices for the same job and a third unrequired entry getting generated. If there are 3 invoices I get 4 lines (3 required + 1 unrequired blank entry).
So to solve this issue I added a button 'Add JOB'. I took another '*NEW_BLOCK*',designed another canvas and and added an item on it containing a dummy jobno field and attached an LOV to that item. Then the same When-Validate-Trigger to that item fetching the details. so when I press the button 'Add JOB' using show_canvas and go_item(dummy_job_item) I navigate to that new canvas, select the jobno there from LOV, fetch the details. Now I wrote execute_query on KEY-EXIT of the NEW_BLOCK so that whatever are the fetched details, they would go on the ORIGINAL_BLOCK.jobno and respective details in resp fields. But this did not work.So I wrote execute_query on the When-New-Block-Instance of the ORIGINAL_BLOCK and it worked.
But now what is happening is when I open the form once again after closing the form, all the back end data is appearing on the form i.e. when I open a new form session every time. But I want the form to be clear with no entries displayed whenever I open the form. I understand the question is lengthy and tricky.
i have master-detail form in which i am generating sequence number as my bill no. on save button.
i want to disable save button after the sequence in generated.
I am trying the new Oracle 12c and its feature to create columns with the keyword IDENTITY. I create a table CREATE TABLE xt (a NUMBER GENERATED by default AS IDENTITY PRIMARY KEY, b VARCHAR2(10));
And populate it, sometimes specifying the value for a and sometimes relying on the system to generate the value:
INSERT INTO xt (b) values ('a');INSERT INTO xt (b, a) values ('b', default);INSERT INTO xt (b, a) values ('c', 3);INSERT INTO xt (b) values ('d');INSERT INTO xt (b) values ('e');
The problem is that the fourth INSERT fails because the system tries to use the value 3 which is already taken. The fifth statement gets the value 4.
And the table now contains: A B - -1 a 2 b 3 c 4 e Is there something I am missing? I understood that by specifying BY DEFAULT, I would be allowed to sometimes specify values on my own without them interfering with the generated values. I now that the same thing works correctly in MySQL (where I would get five rows from 1 to 5 with the same INSERT statements) /nikos
