ORA-06502 - PL/SQL - Numeric Or Value Error
Jul 29, 2011
I have a requirement in which I have to append LOBs and I have to insert the LOB into a table column. I am facing problem when the data exceeds certain limit. (please note that my program logic is given below, not the exact program)
DECLARE
final_html CLOB;
int_html CLOB;
v_str VARCHAR2(32767);
i number:=0;
BEGIN
dbms_lob.createtemporary(lob_loc => int_html, CACHE => TRUE, dur => dbms_lob.CALL);
dbms_lob.createtemporary(lob_loc => final_html, CACHE => TRUE, dur => dbms_lob.CALL);
DBMS_LOB.OPEN(int_html, DBMS_LOB.LOB_READWRITE);
DBMS_LOB.OPEN(final_html, DBMS_LOB.LOB_READWRITE);
dbms_output.ENABLE(1000000);
[code]....
when the looping is done for lesser value say for e.g FOR i IN 1..10 loop, the program works fine, but when the looping is done for more values I am getting "-6502-ORA-06502: PL/SQL: numeric or value error" error message.
View 1 Replies
ADVERTISEMENT
Dec 18, 2012
create or replace package pckname is
Procedure VALIDATE_USER(p out credentials.pc%TYPE,
u in credentials.uc%TYPE,
c in credentials.sc%TYPE);
end pckname;
I m getting error at line 1 and line 8:
View 1 Replies
View Related
Dec 7, 2012
How many types of pl/sql value or numeric errors are there and when occurs.Like as follows
1.ORA-06502: PL/SQL: numeric or value error: character string buffer too small
2.ORA-06502: PL/SQL: numeric or value error: number precision too large
View 8 Replies
View Related
Aug 12, 2013
so im running this script
DECLARE
STQ_ID NUMBER;
MESSAGE VARCHAR2(500);
[Code].....
and getting this error ORA-06502: PL/SQL: numeric or value error: NULL index table key value
the code where it is inserting and getting out of it values is:
IF vt_Prs_Code_Ipr.COUNT <> 0 THEN
IF vt_Ist_Code_Ipr(1) IS NOT NULL THEN
IF vr_data.insurance_kind = 'B' THEN
[Code]....
Im running script at PL/SQL Developer and using debugger, i see that it's inserting dates but at some point between point 5.3.2.1.1 till 5.3.2.1.5 it returns no dates :/ basically it needs to stop at 5.3.2.1.2 and in form need return date 02.02.1996, but it returns 01.01.1996 + gives that ORA-06502: PL/SQL: numeric or value error: NULL index table key value
edit: vt_SnpStartDate(v_Idx)is 01.01.1996
vt_SnpEndDate(v_Idx) is 31.12.1996
vt_prd_tbl(v_Idx2).Start_Date is 01.01.1996
vt_prd_tbl(v_Idx2).End_Date is 01.02.1996
at p.5.3.2.1.3 it shows that there is no date in vt_prd_tbl(v_Idx2).Start_Date and is returning ora error, why?
View 10 Replies
View Related
Aug 4, 2011
I got a string in the form 1+2+4.If we write select 1+2+4 from dual;then we get o/p as 7.but the same thing iam trying to do in a bit of pl/sql program by passing the string 1+2+4 value to a number variable as below.
COUNT_TASK := TO_NUMBER(TASK6_STATUS);
TASK6_STATUS value is 1+2+4 (this thing i got by replacing the string and lots of stuff) but i need the result after adding these 3 numbers in the string. and i declare COUNT_TASK as NUMBER;and i am very well aware that it gives me the error ORA-06502: PL/SQL: numeric or value error: character to number conversion error
how to add these numbers in my program to get the result 7.
View 6 Replies
View Related
Jun 20, 2013
1 error has occurred ORA-06502: PL/SQL: numeric or value error: character to number conversion error
I get the above error when I try to compare the below dates in a Pl/sql process in APEX environment.
Is there a work around for it? or (to_char(V_SERVFROM,'mm/dd/yyyy')) != (to_char(:P29_SERVFROM,'mm/dd/yyyy'))
View 4 Replies
View Related
Jul 14, 2011
i am getting above error while doing
ORA-06502 numeric or value error: character string buffer too small
ORA-06512 itw_item_add_ch at line 17
CREATE OR REPLACE procedure itw_item_add_ch (header_id1 number, folio out varchar2,tariff out varchar2) as
cursor item_add(header_id1 number) is
SELECT
DISTINCT c.attribute4 item_tariff_no,
c.attribute5 item_folio
FROM OE_ORDER_LINES_ALL b,
[code].....
View 11 Replies
View Related
Jul 10, 2012
Following are my declarations and query inside my procedure.i am getting "ORA-06502: PL/SQL: numeric or value error: character string buffer too smal" error when i try to execute the procedure
code :
request_owner request.SCC_USER_ID%TYPE := NULL;
receipt_location request.RECEIPT_LOCATION_LKP_ID%TYPE := NULL;
receipt_type request.RECEIPT_TYPE_LKP_ID%TYPE := NULL;
item_id request.ITEM_ID%TYPE := NULL;
[code]...
View 3 Replies
View Related
Oct 8, 2012
Actually I have an existing table in LOG RAW instead of BLOB. Which stores some transaction XML data. The data is very huge. When i trying with the following, gives me following error
SQL> declare
2 a varchar(255);
3 B LONG RAW;
4 cursor c1 is select xml FROM LOG_tab WHERE ID='13148' ;
5 begin
6 open c1;
7 loop
8 fetch c1 into b ;
[code]....
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 10
Since dbms_output.put_line has buffer limitation.Can we write the result of a select statement into client LOCAL disk files using PL/SQL.
View 1 Replies
View Related
Sep 25, 2012
While running by run script to perform few DMLs - im getting the ORA-06502 - PL/SQL:numeric or value error: host bind array too small.i ve put the server output off and then ON to clear the cache.Still same issue.
View 6 Replies
View Related
Jun 7, 2012
I am getting an error as below
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
Here is complete code
CREATE OR REPLACE
TYPE MDI.ACCUM_STRING_TYPE2 AS OBJECT (
rvalue VARCHAR2 (32767
STATIC FUNCTION odciaggregateinitialize (sctx IN OUT accum_string_type2)
RETURN NUMBER
[code]...
View 4 Replies
View Related
Feb 17, 2012
ORA-00604: error occurred at recursive SQL level 1
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 8
I am reexecuting this view:
set serveroutput on buffer 2560000
;
CREATE OR REPLACE VIEW VIEW_TRIP_ASSIGNMENTS
(COMPANY_ID, TRIP_ID, TRIP_STOP_ID, TRIP_CODE, TRIP_NAME,
TRIP_DESC, TRIP_NUMBER, TRIP_START_TIME, TRIP_END_TIME, TRIP_LOADING_TIME,
TRIP_UNLOADING_TIME, FREQUENCY_ID, FREQUENCY_CODE, FREQUENCY_NAME, FREQUENCY_DESC,
FREQUENCY_CODE_NUMBER, CUSTOMER_ID, CUSTOMER_NUMBER, CUSTOMER_NAME, CUSTOMER_DESCRIPTION,
CUSTOMER_TYPE_ID, CUSTOMER_TYPE_NAME, CUSTOMER_TYPE_CODE, DAY_PHONE_NUMBER, EMAIL_ADDRESS,
CONTRACT_ID, CONTRACT_NUMBER, CONTRACT_DESCRIPTION, WORK_LOCATION_ID, ROUTE_ID,
[code]....
before reexecuting above view I was counting the column and was getting below error:
ora-00600 internal error code,arguments:[qctopn1], [],[],[]...
View 14 Replies
View Related
Oct 2, 2010
i am generating html format mail from oracle 10g database.
For displaying data into html format, message body data is exceeding more than 32k.
ORA-06502: PL/SQL: numeric or value error:character string buffer too small
i am using long data type for message body data.
View 4 Replies
View Related
Mar 28, 2013
Trying to learn and understand Triggers, PL/SQL code, etc. When I execute a simple insert using Toad for Oracle, all is fine. When I try the identical insert in SQL*Plus, it throws error ORA-06502 during execution of the trigger.
Here is the error info:
insert into AAAJOB(PROCEDURENAME,DESCRIPTION) VALUES('OOO','PPP')
*
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "PMSC0.AAAJOB_TIMING", line 10
ORA-04088: error during execution of trigger 'PMSC0.AAAJOB_TIMING'
===
Here is the table and the trigger:
CREATE TABLE PMSC0.AAAJOB
(
CREATETS TIMESTAMP(0) DEFAULT current_timestamp,
PROCEDURENAME VARCHAR2(100 CHAR),
DESCRIPTION VARCHAR2(100 CHAR),
LASTUPDATEDBY VARCHAR2(9 CHAR)
)
[code]....
The error seems to be on this:
SELECT current_timestamp
INTO :new_row.createTS
View 5 Replies
View Related
Aug 23, 2012
I got the error "ORA-06502: PL/SQL: numeric or value error: number precision too large" while assigning a value to variable.
For example var Number(5,3);
var:=225.345
Here it should give this error since the no.of digits before decimal should not be more than 2.
In of the procedure, I am getting this error.
Is there any way can we check this violation before assigning this values to a variable?
For example, if the value is too large, we can give a default value etc before assigning it.
Environment: UNIX AIX - 5.3, Oracle 11.2.0.1
View 3 Replies
View Related
Nov 20, 2010
I have clob column which can have text of any size and any kind of text etcwhen I select using
select ef.finding_number,
ef.recommendation,epf.action_taken_desc
dbms_lob.substr(epf.action_taken_desc, dbms_lob.getlength(epf.action_taken_desc), 1)
as action_taken_desc,
[code]....
I get this error
Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at line 1
then I tired with this query it worked
select ef.finding_number,
ef.recommendation,epf.action_taken_desc,
epf.concur_y_n
[code]...
should I use any functions to select clob ?
View 2 Replies
View Related
Oct 29, 2012
I'm trying to develop a procedure which will read a BLOB field of a table and write an RTF document which will be used as template to another procedure but when the procedure fires up the select statemente, i got stuck with a ORA-06502 error.
This error, after reading the documentation, is caused by incompatibilities between fields (numeric or value error string) But i've seen this example everywhere in the internet and what is causing it.
The source code of my procedure follows:
PROCEDURE p_transfer_db_client(pcPath IN VARCHAR2,
pnSequence IN NUMBER) IS
v_src_blob BLOB;
v_file UTL_FILE.FILE_TYPE;
[code]...
View 1 Replies
View Related
May 2, 2006
My layout is working well enough triggers though are causing me some problems. I am getting the following error message just about every time I write a trigger so I am getting the feeling I am doing something fundamentally wrong. Like there is something I am just not getting because I am getting this error on the simplest of actions.
The error:
FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06502.
--------------------------------------------------------------
ORA-01403: no data found
The trigger is this:
cs3_prog.set_date_mode;
this calls the following procedure in the package cs3_prog:
procedure set_date_mode IS
BEGIN
:cs3_data.street := 'something';
end;
this in the past did a lot more but I kept throwing stuff out to see what could have been causing the problem. This does actually work if I ok through the first error message and then try entering data again into the field the trigger is tied to. On this second firing of the trigger is does successfully alter the value.
Just the fact that this is happening every time I create a trigger and it seems to happen regardless of what I have the trigger doing leads me to believe I have something fundamentally wrong and I would love to have it set straight.
View 11 Replies
View Related
Oct 28, 2010
I am getting the below error in a Stored Package.
SQL> BEGIN
2 NCOTE.OTEGENERATOR;
3 END;
4 /
BEGIN
*
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "GENEVA_ADMIN.NCOTE", line 3
ORA-06512: at line 2
I must be trying to do a select or put some other value into a variable that is too small. The Odd thing is that when I run the stored procedure again (as long as I don't exit from sqlplus)...
SQL> BEGIN
2 NCOTE.OTEGENERATOR;
3 END;
4 /
PL/SQL procedure successfully completed.
why the process is successful the second (or third, etc) call from the sqlplus but not the first. If I exit sqlplus and then start it again, once more I get the error again.
View 6 Replies
View Related
Oct 31, 2010
SQL> ed
Wrote file afiedt.buf
1 begin
2 for i in 3159572060..3159572274 loop
3 insert into recmsisdn(msisdn)
4 values(i);
5 end loop;
6* end;
7 /
begin
*
ERROR at line 1:
ORA-01426: numeric overflow
ORA-06512: at line 2
View 4 Replies
View Related
Jul 25, 2012
I have an error with this request :
SELECT SEQ_ENTITE.nextval, ENT_CODE_ENT, ENT_GPL_ID, TO_NUMBER('2012')+1,
pkg_etl_fdx.f_getseqexe('LPG_TYE', 'TYE_CODE_CON', ENT_CODE_TEN, 'TYE_SEQ', TO_NUMBER('2012')),
ENT_LIB_ENT, ENT_SEUIL, 'O', 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, ENT_CODE_UNI, ENT_CODE_MERE, ENT_IND_FIN, 0,
0, 0, ENT_NIVEAU, ENT_CODE_TEN, CHAR_TO_LABEL('EXERCICE', 'PUB:EXE'||TO_NUMBER('2012')+1||':'), OLS_GRP
FROM ENTITE
WHERE ENT_OLS_EXE = TO_NUMBER('2012');How to fix ORA-01722 PL/SQL: numeric or value error string ?
The description of the table Entite :
desc entite
Nom NULL Type
------------- -------- -----------------
ENT_SEQ NOT NULL NUMBER(38)
ENT_CODE_ENT NOT NULL VARCHAR2(6 CHAR)
ENT_GPL_ID NOT NULL NUMBER(10)
ENT_OLS_EXE NOT NULL NUMBER(38)
ENT_TYE_SEQ NUMBER(38)
[code]....
View 3 Replies
View Related
Oct 21, 2011
When i try to use the PIPELINED returned function in the for loop, I am getting the below error
ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated Bind
View 2 Replies
View Related
Apr 16, 2010
I have wrote a Stored Procedure Function that get all the rows from a Staging Table and assigns it to a CLOB and returns the CLOB. The issue is I'm getting the dreaded
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "F_CLOB_TEST", line 21
ORA-06512: at line 7
The error does not occur when I remove the 'PRC_ID', 'S_FIL_NAME' & 'exportDt' from the query. It works fine. The PRC_ID has data such as "700$702$7 05$706$707$708$709$710$711$712$713$714$715$294404$294405$294407$294408$294409$294410"
and S_FIL_NAM is the same for all columns - "SBENE_FILID810-2010-04-07-10.59.17"
The query returns 829 rows. Also I have to include a few more columns in the query which have data larger than the 'PRC_ID', but I have not included them here in the sample code, as this code by itself returns the ORA-6502 error.
create or replace
FUNCTION "F_CLOB_TEST" (job_id in Number)
return clob
is
c_clob clob;
[code]....
View 26 Replies
View Related
Sep 4, 2012
What is the first term in the Fibonacci sequence to contain 1000 digits?
DECLARE
f_num INTEGER;
n_num INTEGER;
h_num INTEGER;
[code]...
why I am getting this error?? Is there any problem in my code??
View -1 Replies
View Related
Sep 23, 2012
SQL> declare
2 TYPE id_collection is TABLE of number(6);
3 TYPE ename_collection is TABLE of varchar2(20);
4 id ID_COLLECTION;
5 ename ENAME_COLLECTION;
6 cursor c is select empid,name from Nemp;
7 begin
8 open c;
9 loop
[code]....
Here sub_Nemp is my new table in which i have to insert the values from Nemp old table.Both tables are same like below:-
SQL> create table sub_Nemp(empid number(6),name varchar2(20));
I'm unable to find this error...
View 7 Replies
View Related
May 24, 2011
when I want to create a table.When I run my procedure I received :
PL/SQL: numeric or value error: character string buffer too small
create or replace PROCEDURE p_create_tmp_tables (p_result OUT NUMBER ) IS
string_sql varchar2(1000);
result NUMBER;
BEGIN
string_sql := 'CREATE TABLE TMP_CATEGORIES (CODE_CATEGORY NUMBER(6,0), NAME_CATEGORY VARCHAR2(25 BYTE))';
execute immediate string_sql;
[code]...
View 10 Replies
View Related
May 6, 2008
I am trying to execute this
begin
-- Initialize owa with an empty array, just so we can use htp.
owa.init_cgi_env( param_val=>owa.cgi_var_name );
-- Add a header to avoid dealing with header-related code in htp.
htp.prn('Content-Type:text/plain');
htp.print('');
[code]....
The error I am getting is
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "SYS.HTP", line 1550
ORA-06512: at line 32
what i feel is that oracle Database UTF8 or AL32UTF8 characterset does not support htp package properly. When i run the code on another characterset, it runs errorfree except in UTF8 or AL32UTF8.
View 7 Replies
View Related
Mar 14, 2013
I have made a report with sql injection. there is no problem with the report. but when i run from the form with following string it gives error.
:global.where_clause := 'where request_type = 5 and request_status in (3, 4, 5) and list_approval_date is null';
And no error is there if i passed the string as
:global.where_clause := 'where request_status in (3, 4, 5) and list_approval_date is null';
REQUEST_TYPE is a database column and it is of number type.
View 9 Replies
View Related
Jan 24, 2011
I am learning pl/sql and this is procedure i had created which got created successfully.then i created two variables name v_name, v_loc with command.
variable v_name varchar2; etc.
and executed procedure like
execute dept_proc2(10, :v_name, :v_loc);
and i am getting the error
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
1 create or replace procedure dept_proc2
2 (v_dno in number, v_name out varchar2, v_loc out varchar2)
3 is
4 cursor dept_cur is select dname, loc from dept
5 where deptno=v_dno;
[code]...
View 12 Replies
View Related
Oct 10, 2011
I have an sqlldr process running loading data into my database. I have created a trigger to run before inserts on each row to start gathering summary data from the basic underlying data. The trigger compiles ok and the procedures the trigger is calling compile ok, but when the sqlldr process runs I get errors in the log files.
Here is the sqlldr control file:
LOAD data
APPEND INTO TABLE cdr.day_tables
FIELDS TERMINATED BY ','
TRAILING NULLCOLS
(
RecordCode
,CdrStart DATE 'YYYY DDD SSSSS'
[code].......,
Next is my trigger
create or replace TRIGGER BNUMBER_SUMMARY_INS
BEFORE INSERT ON DAY_TABLES
FOR EACH ROW
DECLARE
[code]......
Next are the procedures that are called by the trigger:
create or replace PROCEDURE BNUMBER_SUMMARY
( BNUMBER IN VARCHAR2
, CALLDATE IN DATE
, CALLDURATION IN NUMBER
) AS
record_found NUMBER;
BEGIN
[code].......
The error messages I am getting are:
Record 1: Rejected - Error on table CDR.DAY_TABLES, column CDREND.
ORA-01858: a non-numeric character was found where a numeric was expected
ORA-06512: at "CDR.BNUMBER_SUMMARY_INS", line 6
ORA-04088: error during execution of trigger 'CDR.BNUMBER_SUMMARY_INS'
I need to find out what field it is complaining about, especially since I am not even using the cdrend field from the input record?
View 14 Replies
View Related
