Load Average In AWR Report?
Jul 26, 2013
,I've some database in 11.2 RAC on AIX.I was analyzing the root causes of eviction.Looking AWR Report before the reboot I see:
DB1 Host CPU (CPUs: 6 Cores: 3 Sockets: )~~~~~~~~ Load Average Begin End %User %System %WIO %Idle --------- --------- --------- --------- --------- --------- 4.18 12.33 60.9 12.6 1.6 26.5 Instance CPU~~~~~~~~~~~~ % of total CPU for Instance: 27.4 % of busy CPU for Instance: 37.3 %DB time waiting for CPU - Resource Mgr: 10.6 DB2 Host CPU (CPUs: 6 Cores: 3 Sockets: )~~~~~~~~ Load Average Begin End %User %System %WIO %Idle --------- --------- --------- --------- --------- --------- 3.77 13.93 60.7 12.5 1.6 26.7 Instance CPU~~~~~~~~~~~~ % of total CPU for Instance: 6.9 % of busy CPU for Instance: 9.5 %DB time waiting for CPU - Resource Mgr: 0.0
Do you think these value ar high? This is vmstats at the time of reboot:
DATARUNBCKAVMFREPREPPIPPOPFRPSRPCYFINFSYFCSCUSCSYCIDCWA07/21/2013 00:08:173107.400.345579.92308100003.292187.01019.56084160007/21/2013 00:08:171717.390.187589.884017600003.681169.99421.48281190007/21/2013 00:08:172717.402.121577.816011500003.150157.21018.50384160007/21/2013
[code]...
View 3 Replies
ADVERTISEMENT
Oct 16, 2010
My problem is only on Some Saturday's my Oracle server's Load average goes high (more than 300 ).
-- oracle version 11.2.0.1.0
-- runs on Sun solaris 10
-- Sun fire V 440
-- Sun storEdge 3315 connected to the server.
Same setup is working find with higher volumes without any problem but only on saturday's, that too not on all saturdays, some specific saturdays the load average goes high.
At the time nothing will be processed from the application side and the cpu utilisation goes high upto 95 %.
I am sending necessary information as follows.
vmstat 6 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s0 s1 s3 s4 in sy cs us sy id
3 0 0 28660024 6513408 285 212 2044 2 2 0 0 0 17 0 42 830 3469 1380 22 5 74
125 0 0 29027480 6156256 2 6 34 0 0 0 0 0 5 0 10 791 53770 30278 83 17 0
125 0 0 29027680 6157496 29 140 21 1 1 0 0 0 5 0 9 786 52756 30309 83 17 0
116 0 0 29031600 6159896 24 125 0 0 0 0 0 7 3 0 5 819 54081 31069 83 17 0
[code]....
View 1 Replies
View Related
Sep 6, 2012
I am starting to use the interactive reports in version Apex 4.1.1 but I am unable to get the report to show null records on the first load. Is there a setting that would stop the data from loaded on first load or would I have to customize that option.
Some of the columns have a lot of data and therefore take a long time to load so I would like to avoid that.
View 2 Replies
View Related
Oct 1, 2012
I am on APEX 4.1.1, db 11g and I have a report which is quite slow to retrieve results from its query. The page has some filter fields (e.g. store code, dept code) in addition to the generic search field.
When the user lands on this page (from a menu page), the query runs before the page displays and this typically takes 1-2 mins without any filters yet set. The usual browser loading indicators are not obvious to the user and they might not be aware that it is working on the request.
I want it so that it will only run the query AFTER allowing the user to get to the page, let the user fill in some filter criteria and then click on the GO button. Therefore the query will run after the page is submitted. When you hit the GO button on the interactive report, a nice rotating apex_loader.gif appears, making it obvious to the user that it is working on the request.
I would prefer NOT to create 2 pages, one for user filter, and a second for the actual report as I have many reports/inquiries which fit this category and I would prefer NOT to have to create pairs of pages for each.
View 5 Replies
View Related
Sep 27, 2011
I have a table with products (xPRODUCT), dates (xDATE) and parameters (xPARAMETER). Now I want to calculate the rolling 12 month average of the parameters over all products for all dates. I tried this:
select xDATE,
avg(xPARAMETER) over ( order by xDATE
range between numtodsinterval(365,'day')
preceding and current row )
[Code]....
... but this does not work. How can I do this?
View 5 Replies
View Related
May 9, 2010
I wish to query the pro_vitual_bytes by hourly average by server name from 04/01/2010 to 04/02/2010. how i going to perform the query.
SERVER_NAME DATE_TIME PRO_VITUAL_BYTES
MLYORABA04/01/2010 00:00:402,238,312,448.00
MLYORABA04/01/2010 00:01:402,241,458,176.00
MLYORABA04/01/2010 00:02:402,238,312,448.00
MLYORABA04/01/2010 00:03:402,241,458,176.00
[Code]....
View 4 Replies
View Related
Apr 5, 2011
How To Calculate Average in Forms 6i for example a summary column named (Amount = 5000) and i want to calculate 15% average of this amount i want to calculate it like summary column .
View 2 Replies
View Related
Jun 17, 2010
how to calculate the average of the time in th e HH:MM:SS format stored database table.. column contains hundreds of time values and need to table the avergae of it
my col look like,and column is declared as timestamp(6).
MY COL
------
1:13:00
1:06:00
0:43:00
0:47:00
0:32:00
0:19:00
0:39:00
0:46:00
0:56:00
1:39:00
[Code]...
View 29 Replies
View Related
Nov 23, 2012
Version : 11g
I have a table with the following format and data
Serial no exp_Date exp_type exp_amount
1 01-nov-2012 Rent 10000
2 02-nov-2012 gas 250
3 02-nov-2012 insurance 9500
.
.
.
I want to create a sql output for a yearly view in the format
exp_type JAN FEB MAR APR ..... NOV DEC TOTAL AVERAGE PROJECTED
Rent 10000 10000 10000 10000 10000 10000 120000 10000 120000
gas 250 250 250 250 250 250 3000 250 3000
.
.
Now a couple of things in this
1. the average gives the average for the year, so lets say its start of 2013 and we are in feb, there will not be any values for the remaining months, so it should do the average for that exp_type for Jan and Feb based on the exp_amount entered against that type and show what is the expected average. Similary, projected will that average amount and mulitply it by 12 to show the exp amount expected based on current expenses
I was able to come up with the following sql to get the sum based on months, was not sure about average, total and projected
SELECT exp_type
, SUM (CASE WHEN to_char(exp_date,'Mon') = 'Jan' THEN exp_amt END) AS Jan
, SUM (CASE WHEN to_char(exp_date,'Mon') = 'Feb' THEN exp_amt END) AS feb
, SUM (CASE WHEN to_char(exp_date,'Mon') = 'Mar' THEN exp_amt END) AS Mar
, SUM (CASE WHEN to_char(exp_date,'Mon') = 'Apr' THEN exp_amt END) AS Apr
, SUM (CASE WHEN to_char(exp_date,'Mon') = 'May' THEN exp_amt END) AS May
[Code]....
getting the correct avg, total and projected fields also in the same sql?
View 8 Replies
View Related
Jul 18, 2013
I'm trying to build a query capture the below information. Table looks something like below .
RoomSubjectStudentsA1Science10A1Maths20B1Science15B2English25C1Deutsch20A1French15C1English10
How can i write a query so that i takes the average of students in each room and display the output? I need to write a query so that it also picks up any new rooms and students added. Average is sum of total students in room by number of times each room is specified.
eg: A1 is listed 3 times a the result would be 10+20+15 divided by 3.
A1 B1 B2 C115 15 20 15
View 7 Replies
View Related
Dec 15, 2011
I have to procedure that computes number of project, and average working hours of employees where employee id is passed as a parameter to the procedure. If the average working hours is less than 10 then employee's salary remain the same, otherwise check if number of project is less than 4 then 5% of salary, else 10% of salary is added to the salary.
my tables are:
CREATE TABLE employee(
empid number(5),
empname varchar(20),
address varchar(20),
no_of_dependents number(5),
deptno number(5),
CONSTRAINT EMPLOYEE_PKEY PRIMARY KEY(empid),
CONSTRAINT EMPLOYEE_FKEY FOREIGN KEY(deptno) REFERENCES department(deptno));
[code]...
the problem is i have to use only 2 cursors - 1 for select and 1 for update.
View 27 Replies
View Related
Jul 22, 2012
I want to write a sql qeuery to get result similar to expected average column as shown in sheet.
Record can be uniquely identified by columns ID, PRODUCT and OFFICE. I want to calculate average for each date considering the same record does not exists earlier i.e. I want to consider the latest vote while calculating average. E.g.
Average till date 1/1/2011 is Avg (2, 4, 3) = 3 (as no repeating vote value exists)
Average till date 2/1/2011 is Avg (4, 3, 5, 3) = 3.75 (excluding vote value 2 as 122_UK_LONDON was provided his vote earlier, so considered latest vote value i.e. 5)
Average till date 3/1/2011 is Avg (3, 5, 3, 6, 5, 8 ) = 5 (excluding vote value 2 for 122_UK_LONDON and vote value 4 for 967_Europe_London)
View 15 Replies
View Related
Aug 10, 2013
I need to calcaulate the salary avarage for three days prior, leaving the current row. That should happen to every row moving back words.I have given all the details.
create table Employee(
ID VARCHAR2(4 BYTE) NOT NULL,
name varchar(20),
Start_Date DATE,
Salary Number(8,2),
mv_avg number(8,2)
[code]....
View 17 Replies
View Related
May 2, 2013
I have the following query that creates sums by week.
SELECT cidterr.rnam,
cidterr.rnum,
cidterr.tnam,
cidterr.tnum,
[code]...
I want to convert this query to just return a single line for -cidterr.rnam, cidterr.rnum, cidterr.tnam, cidterr.tnum
With an average sum by week. Similar to how if I did a sum by week from the original query and placed the results into an excel pivot and said show total as average.
View 3 Replies
View Related
Feb 27, 2013
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE 11.2.0.1.0 Production"
TNS for HPUX: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I have a problem related with hierarchical queries, I have this tree.
- a
/
b c
/ |
d e fI need to calculate an average per node but using always the child's results for example: Only leafs will have values:
d = 10
e = 20
f = 30
c = 40So the expected result is:
d = 10
e = 20
f = 30
c = 40
b = (10(d) + 20(e) + 30(f)) / 3 (number of child nodes) = 20
a = (20(b) + 40(c)) / 2 (number of child nodes) = 30.
I have tried with recursive queries, hierarchical queries, I guess it's possible with model too but I can't produce the exact results that I need. Maybe in fact there is a very simple solution but I cannot figure it.
Here is an auxiliary WITH that you can use to start your tests:
WITH tree AS
(
SELECT 'd' child, 'b' parent FROM dual UNION ALL
SELECT 'e' child, 'b' parent FROM dual UNION ALL
SELECT 'f' child, 'b' parent FROM dual UNION ALL
SELECT 'b' child, 'a' parent FROM dual UNION ALL
SELECT 'c' child, 'a' parent FROM dual UNION ALL
SELECT 'a' child, null parent FROM dual
[code]....
View 3 Replies
View Related
Jun 10, 2011
I've got values for each workday of month in table. Chief said we don't load values of weekend because of space and time economy. Weekend value is copy of last workday. How do I count average for month in this case? Technical task in Excel worksheet consist of each day of month, so average value is 14 689 262,86. I should get the same result in my query. My example below shows values, 0 is workday (present in table), 1 is weekend (absent in table)..
select 12230427, 0 from dual
union all
select 11960157, 0 from dual
union all
select 12965902, 0 from dual
union all
select 13939736, 0 from dual
[Code]...
View 31 Replies
View Related
Mar 4, 2012
from last two weeks we are receiving rhe below database alert on our second NODE (RAC ENV).
Global cache Average CR get time " is at .61789
Threshold is set on >.5 (M.Second).
me to figure this out because i really dont know the nature of this alert. what value i can set for the warning threshold.
View 1 Replies
View Related
Jun 28, 2012
I want to read a record that has 6 columns
RECORD |Col1 |Col2 |Col3 |Col4 |Average |Standard Deviation
0001____|Null_|5___|8___|10__|8.75___|2.986079
With SQL I want to calculate Average and Standard Deviation.
View 4 Replies
View Related
Apr 18, 2013
I´m monitoring a 11g database with OEM. I have a couple of questions regarding the Average Active Sessions chart:
- What does the line 'CPU core' means? The DB is running in a virtual server with 8 CPUs. However, the line 'CPU core' is in 1. Does it mean that Oracle is just using 1 CPU?
- What represents the '99th percentile' line? The chart shows several sessions above that line, something is not working well, isn't it?
View 4 Replies
View Related
Sep 20, 2012
How can i print a report name with full path at left bottom on report.
View 3 Replies
View Related
Dec 10, 2012
Having this issue in Apex 4.1.1 and 4.2 (haven't tried it in versions prior to 4.1.1 yet). So I got my standard IR, and trying to create a private report with control breaks, aggregations.
Once I save it as a private report, It applies the same on my primary report.
It's no big issue as I can flip back to Primary report and delete the control breaks, aggregations but is some kind of bug? Ideally it shouldn't modify my primary report unless I try to save it as "Default Report Setting".
View 1 Replies
View Related
May 9, 2013
How do I create Items context help editable report or report & form app?
what is its table?
View 2 Replies
View Related
Nov 29, 2011
I am trying to open report in parameter form in drill down report.
View 7 Replies
View Related
Oct 25, 2013
I have a Page containing 3 reports and I was wondering if it is possible to re-execute only one of the these reports using a button or preferably a Select List which allows me to choose which of the 3 reports I wish to 'refresh/re-execute'. I may be totally wrong here but I assumed that choosing the option to submit a Page will cause all regions to refresh i.e. re-execute the SQL queries they are 'based on'.
View 6 Replies
View Related
Dec 19, 2011
I had report A which drill down to report B. While drilling down to report B, The parameter form of report B should be displayed which accept parameter code and then open the report B. My parameter form is displayed but not accepting the input. i am using the hyperlink to display the second report. Is there any cgimap.bat file to be configured for the parameter report? If yes then how to configure this file?
View 1 Replies
View Related
Nov 1, 2012
I have a Report Region with Type SQL Query and Source "SELECT * FROM <table>" where <table> has a primary key from a sequence. Under Report Attributes, I have Report Column "ST_NM" with Show and Sort checked and having a Sort Sequence of "1". I assume this is to set the iniital display sequence but regardless, the report rows display in Primary key order initially.
To try it: [URL]
1) How do I set the initial display sequence to be other than the primary key sequence?
View 4 Replies
View Related
Jul 20, 2012
What is the code/javascript/url behind the test report button on report queries component?
We are having DSN problems using the print url given on the report query. The URL works for some of our developers and not for others.
The test report button on the report query appears to work for everyone but I do not know what is behind the "Test Report" button. If I could recreate the test report button on our page this would be GREAT!
View 0 Replies
View Related
Sep 4, 2013
i made a matrix report using report builder 6ii want to export all report data into excel.
View 0 Replies
View Related
Jun 27, 2012
I have to implement IR report search functionality (*when ever we click on column header it will display all the values in that particular column , once we click on particular value , the report will filter based on that particular value * ) in classic report .
View 8 Replies
View Related
Jul 24, 2011
Is there any way of stopping the report from executing in Before-Report Trigger.
Actually what i am doing is to see whether some records are present there in the table in Before-Report Trigger on which the report is going to print. Because I am doing some updates in After-Report trigger. I want to stop if there is no records present in the table in Before-Report Trigger so the report will not go forward to After-Trigger of the report.
how to stop and by using which statement.the other way so that if report has no data then After-Report Trigger should not fired.
View 2 Replies
View Related
