Import Not Working In Oracle 11g?
Nov 9, 2012
could not import using impdp. it hangs while processing view.
Oracle version : Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
expdp user/pwd full=y directory=export dumpfile=exp_test.dmp
There is no error in export log.
impdp user/pwd directory=data_pump_dir dumpfile=exp_test.dmp logfile=imp_test.log table_exists_action=replace
*** 2012-11-09 10:23:27.799
A deadlock among DDL and parse locks is detected.This deadlock is usually due to user errors in the design of an application or from issuing a set of concurrent statements which can cause a deadlock. This should not be reported to Oracle Support. The following information may aid in finding the errors which cause the deadlock:
ORA-04020: deadlock detected while trying to lock object MV_LOTS
View 1 Replies
ADVERTISEMENT
Aug 21, 2013
I am running my oracle apex application on 4.2.2 on apex.oracle.com. Exporting the application seems to work but when I go to import the application as a copy the regions within a particular page are not working correctly. I want to be able to export the application and import a new copy as a DEV/TEST application and have it function the same way. On the original application the region will display to the right when hovered over the edit button but in the new one it will go to the left and not format correctly.How I would like it is just for the copy application to perform the same way the original copy does. I selected to install all dependent objects and don't know what steps I have missed to have the regions not working like they do on the original application. related to CSS not exporting/importing correctly?
View 0 Replies
View Related
Nov 23, 2012
I had just successfully finished a full importing from Oracle 9i DB to Oracle 11gR2 DB. My export was a full db export.
Prior to this importing, my 11g was a newly created DB with the default SYS, System etc.. schema. Their passwords is different from those in 9i.
However, i realised that after importing... their passwords in 11g was replaced by those passwords in 9i, including SYS and SYSTEM user...
View 5 Replies
View Related
Jan 7, 2013
I have new machine with oracle 11g and i have exported dump from oracle 10g . Now i need to import that dump on oracle 11g.
View 3 Replies
View Related
Apr 1, 2013
Below is the sample code working fine in 10g and not working now in 11g.
CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED "PSTest" AS
import java.sql.SQLData;
import java.sql.SQLException;
import java.sql.SQLInput;
import java.sql.SQLOutput;
import java.util.List;
[code]....
we got the below error: ORA-00932: inconsistent datatypes: expected an IN argument at position 1 that is an instance of an Oracle type convertible to an instance of a user defined Java class got an Oracle type that could not be converted to a java class
Current Oracle version is Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit and the version we are upgrading is Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit
View 3 Replies
View Related
Mar 22, 2013
I have two tables : oa_membership_dtl(in this created_by field is varchar2(200 byte) ,oa_partner_usr_dtl(in this table partner_userid is number(8,0) i need to do join on above fields.
I am using following two queries:
select * from oa_membership_dtl membership
join oa_partner_usr_dtl partner_user
on to_char(partner_user.partner_userid,'9999')=membership.created_by
select * from oa_membership_dtl membership
join oa_partner_usr_dtl partner_user
on rtrim(ltrim(partner_user.partner_userid||' '))=rtrim(ltrim(membership.created_by))
by using first data is not fetched but 2nd is working fine , i am getting the matched records using 2nd query.
whats the diff between to_char and || symbol?
View 1 Replies
View Related
Jan 20, 2011
I am unable to configure EM(Oracle 11.2g) on Redhat Linux 5 Enterprise edition(32 bit). Environment variables are set to correct SID. If I try to run dbca the wizard does not display the Enterprise manager configuration screen. I have tried to create repository by using emca -config dbcontrol -db config.
But it throws exception that database instance is unavailable?
View 5 Replies
View Related
Oct 31, 2011
I tried to insert date in date column from another table date column. Below is SP ans execute procedure.
CREATE OR REPLACE PROCEDURE test(
start_time Varchar
)
AS
BEGIN
DBMS_OUTPUT.ENABLE(1000000);
DBMS_OUTPUT.PUT_LINE(start_time);
Insert into test_ora (report_date) (select start_time from
[code]....
execute test ('27-10-2011 12:01:01');
It gives error as Invalid number.
View 2 Replies
View Related
Mar 30, 2012
following is a query which i find difficult to understand why EXISTS is failing. There are two scenarios where if i block LINE 30 and unblock line 31 of the code then one record is returned.
SELECT A.ENTITY_CODE,
A.VRNO,
A.VRDATE,
[Code]....
View 4 Replies
View Related
Jun 16, 2010
I have an oracle package that i am using to search for a string in a blob entry. I compiled the package and the package body in one environment, it had no errors, when i execute, i get my results.I went ahead and created the same package and function in another environment and it fails by giving me the below error
ORA-06503: PL/SQL: Function returned without value ORA-06512: at "SYSTEM.IMPACTUS_PCODE", line 158 for sysadm
I have used this on other environments often and have never had an issue.
View 7 Replies
View Related
Mar 26, 2013
I am trying to setup a one way queue that will be consumed by an inhouse ESB.We currently are able to create a multi-consumer queue using:
CODEBEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(queue_table => 'strmadmin.streams_queue_table',
queue_name => 'strmadmin.streams_queue');
END;
but unfortunatly the ESB that we are using uses a jms component which seems to only be able to take mono-consumer queue.So we have created our queue usuing the following
CODEBEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE( Queue_table => '"STRMADMIN"."STREAMS_QUEUE_TABLE"',
Queue_payload_type => 'SYS.ANYDATA',
storage_clause => 'PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 TABLESPACE
[code]...
This therefore permits us to have a queue/queuetable which pushes data to a single consumer.The probleme comes when we try to add a table rule using the following command:
CODEBEGIN
DBMS_STREAMS_ADM.ADD_TABLE_RULES( table_name => 'source.t1',
streams_type => 'apply',
streams_name => 'streams_apply',
queue_name => 'strmadmin.streams_queue',
[code]...
We then get the following error:
CODEORA-06512: on line 2 24039. 00000 - "Queue %s not created in queue table for multiple consumers"
*Cause: Either an ADD_SUBSCRIBER, ALTER_SUBSCRIBER, or REMOVE_SUBSCRIBER procedure, or an ENQUEUE with a non-empty recipient list, was issued on a queue that was not created for multiple consumers.
*Action: Create the queue in a queue table that was created for multiple consumers and retry the call.
We are able to create the capture rule without any problem but without the apply rule, nothing seems to end up into the queue table.AQ is not a viable solution since it is troublesome when it comes to deletes and mass updates.
View 1 Replies
View Related
Sep 7, 2011
I am trying to migrate an app made over Informix Database and I've stopped within this error.
As it seems, Oracle doesn't allow me to use an field of the main Select in my Inner Joins. The select is below
select
oins.versionseqno
,oins.itemtargetseqno
,oins.targetmarketcountrycode
,oins.targetmarketsubdivisioncode
,oins.destinationorgseqno
,oins.commandtype
,oins.isoriginal
[code]...
The error is:
ORA-00904: "I"."ORGSEQNO": identificador inválido
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Error at Line: 26 Column: 12
I've tried to Inner Join at the FROM clause but I was not managed to do that.
View 9 Replies
View Related
Jul 4, 2013
I'd like to talk about some interesting behaivor with Oracle RAC load balancer.We have Oracle RAC 11.1.0.6 - 2 nodes.
We noticed sometimes the number of sessions { select count(1) from v$session; } was not divided equally between nodes. Also load average was very different between node #1 and node #2.Now we define service explicitly.
srvctl add service -d MYORCL -s MYSERVICE -r MYORCL1,MYORCL2
srvctl config service -d MYORCL -a
MYSERVICE PREF: MYORCL1 MYORCL2 AVAIL: TAF: NONE
After we change connection string of corresponding application(s) the spread will be more equal:
select service_name,inst_id, count(*) the_qty
from gv$session
where service_name = 'MYSERVICE'
group by service_name, inst_id
SERVICE_NAME INST_ID THE_QTY
---------------------------------------------------------------- ---------- ----------
MYSERVICE 1 68
MYSERVICE 2 79
Although it's not round robin algorithm, the distribution looks more equal. It seems explicitly defined service of Oracle RAC has better load balancing approach comparing to the default service (created with db by default).
But there is some downside with more 'equally' distributed load balancing. Consider a client program that is running the following SQL once a 5 minutes:
select ...
from A
inner join B on ...
inner join C on ...
inner join D on ...
where the tables B, C and D data is changing all the time.Once load balancing is distributed more 'equally', the query above will arrive to node #1 and to node #2 more equally. It will cause more interconnect traffic, because Oracle RAC will need to synchronize requested blocks all the time, with much high rate.
View 1 Replies
View Related
Sep 10, 2013
We are facing an surprising problem in oracle 10g database. Previously we are able to connect our Oracle 10g database using os authentication with "sqlplus / as sysdba" command. Last wednesday in our linux server maximum number of processes have overflowed and we need to increase the soft limit of our linux server. After that without restarting database every applications [OID 10g] are working fine. But, we are not able to connect with system using OS authentication. It is showing following.
$ export ORACLE_HOME=/a01/OID$ export ORACLE_SID=OID$ export PATH=$PATH:/a01/OID/bin$ sqlplus / as sysdbaSQL*Plus: Release 10.1.0.5.0 - Production on Tue Sep 10 06:45:08 2013Copyright (c) 1982, 2005, Oracle. All rights reserved.Connected to an idle instance.SQL>
Whereas I can connect with instance after providing @OID [SID]$ sqlplus sys@OID as sysdbaSQL*Plus: Release 10.1.0.5.0 - Production on Tue Sep 10 06:47:07 2013Copyright (c) 1982, 2005, Oracle. All rights reserved.Enter password:Connected to:Oracle Database 10g Enterprise Edition Release 10.1.0.5.0 - ProductionWith the Partitioning, OLAP and Data Mining optionsSQL> What am I missing. How can I connect with system with "sqlplus / as sysdba" command?
View 21 Replies
View Related
Sep 21, 2011
I have a query which returns a nested table as a result of split function. I used any method to unnest the data. But I couldn't. I try it with this query.Note: To run the following query I attached everything needed.
-- This query gives very strange results.
SELECT *
FROM
(
SELECT
[code]...
View 18 Replies
View Related
Aug 20, 2010
whenever i double-click on the Canvass node of Forms builder, it displays the "Working..." status on the lower left corner, then after a minute or so, the following message appears:
--
"Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience.If you where in the middle of something, the information you were working on might be lost.
Send Error Report / Don't Send"
--
after clicking on the Don't Send button, the builder will close down. i just installed oracle 10g (10.2.0.1.0) database and 6i developer which i downloaded from oracle website.
View 2 Replies
View Related
Jun 23, 2012
I'm having great difficulty connecting to two separate databases on my PC. Here are the details.
c:>echo %TNS_ADMIN%
C:TNS_ADMIN
#C:TNS_ADMIN nsnames.ora
XE =
(DESCRIPTION =
[code]...
View 22 Replies
View Related
Sep 5, 2012
Is there an Oracle date function that ignores public bank holidays and calculates working days only?
View 4 Replies
View Related
Mar 13, 2009
how do i can make oracle function for the following vb6 function.
This function is used for calculating working days between two date.
****************************************
Public Function Work_Days(BegDate As Variant, EndDate As Variant) As Integer
' Note that this function does not account for holidays.
Dim WholeWeeks As Variant
Dim DateCnt As Variant
Dim EndDays As Integer
On Error GoTo Err_Work_Days
BegDate = DateValue(BegDate)
EndDate = DateValue(EndDate)
WholeWeeks = DateDiff("w", BegDate, EndDate)
DateCnt = DateAdd("ww", WholeWeeks, BegDate)
[code]......
View 3 Replies
View Related
Oct 25, 2010
I am querying a table having 6 million records,It takes arround 35 seconds in command line terminal using putty in a windows client.
Also the server is linux centos with oracle 11g installed. I saw the method Oracle result_cache which i am suspecting to be fast
my query is
"select /*+ result_cache */ * from relationshipobject;"
SQL> set autotrace traceonly stat
SQL> set timi on
[Code]....
i can i reduce my query execution time and consistent gets?
View 10 Replies
View Related
Feb 9, 2013
i want to use oracle translation builder to translate forms and reports from English into Arabic i run run the script SQLBLD and create new db connection an finally create a new project when am trying to import module i got the error NX-00201
View 3 Replies
View Related
Sep 9, 2010
Oracle UNION ALL performance issue: when I try to run below SQL query separately SQL part1 and SQL part2 it takes some seconds only but if I run together with group by and without group by it take much time.
SELECT AVG(date_completed-login_date),to_char(to_date(login_date), 'YYYY') as wYear FROM
(
SELECT test.date_completed 'date_completed',sample.login_date 'login_date')
FROM sample test
where (some conditions) ) ---SQL part 1
UNION ALL
[code]...
View 33 Replies
View Related
May 30, 2010
I have an application server on windows 2003 server. Now i have one Mac Book and i want to use the application in that. I have searched and find that i have to change in formsweb.cfg. I have made the changes according to that but my screen is coming blank only. I have change the formsweb.cfg like this
[jpi]
baseHTMLJInitiator=basejpi.htm
form=d:accountlogin_form.fmx
workingdirectory=d:account
userid=account/account@ORCL
width=1200
[code]...
View 4 Replies
View Related
May 20, 2011
I'm trying to connect Oracle 11g database from Oracle 9i database, by creating dblink on Oracle 9i database. But my session got hang while i perform this. Here i'm giving the steps i followed on my both the database. Here Oracle 9i database is my source db and Oracle 11g is my target db.
Following steps/setting on Oralce 11g Database
SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
sec_case_sensitive_logon boolean TRUE
SQL> alter user SSA identified by SSA;
User altered.
Password File recreted on Oracle 11g Database Server
[oracle1@dev11g dbs]$ orapwd file=/backup/ora11gsoft/odb/OH1/dbs/orapwwbdata
ignorecase=n password=dev entries=5
Following steps performed on Oralce 9i Database
DROP DATABASE LINK "SSA11G.SSA_DB1.WBTEA.COM";
CREATE DATABASE LINK "SSA11G.SSA_DB1.WBTEA.COM"
CONNECT TO SSA
IDENTIFIED BY SSA
USING 'DEVDATA.DEV11G';
Database link created.
SELECT * FROM SSA.SSMASTER@SSA11G;
And the hangs for ever.
View 4 Replies
View Related
Feb 26, 2008
I'm looking for solutions to make real time replications from an Oracle 8i database.
For more details :
- we have an existing database with Oracle 8i
- we want to replicate this database: the replicated database will be used by a web application.
- we need the replication to be in real-time (we wish to have the shortest lag)
For the moment i didn't find much information on the web and it seems that replication solutions for the version 8i are quiet limited.
Some more details :
- The responsible want imperatively that the web application work with a replicated database, without interacting directly with the original one.
- An evolution of oracle should be done but within some years so were trying to find a solution rapidly with 8i.
View 3 Replies
View Related
Sep 20, 2011
I have been developing and oracle application therefore i have installed the oracle express edition 10g database software and the oracle developer 10g. I did some changes in sql*plus i mean i have changed the language(through 'nls_lang' to Arabic), i made a autonumber trigger, i changed the calender format (through 'alter_session...'), now all the changes are working fine from the oracle sql*plus but as i am running my form from form builder none of those changes are working.
i thought the oracle form and sql*plus don't have such link..i can add the tables i have created in sql*plus into the form.
View -1 Replies
View Related
Nov 25, 2012
I have an oracle application (Froms 6i) that is being accessed from a PC client running Windows 7 Professional. Whenever I try to access the the application I get a "Oracle Forms Runform has stopped working" error. I tried installing the runtime over and over again withn no use. This is not the first problem I encounter with "Windows 7- Oracle 6i" combination.
View 1 Replies
View Related
Aug 17, 2012
I used the Exchange Partition feature to swap segments between 2 tables- one Partitioned, and one Non-Partitioned. The exchange went well. However, all the data in the partitioned table has gone to the partition which stores the maxbound values.
/** actual table names changed due to client confidentiality issues */
-- Drop the 2 intermediate tables if they already exist
drop table ordered_inv_bkp cascade constraints ;
drop table ordered_inv_t cascade constraints ;
/**
1st create a Non-Partitioned Table from ORDERED_INV and then add the primary key and unique index(s):
*/
create table ordered_inv_bkp as select * from ordered_inv ;
alter table ordered_inv_bkp add constraint ordinvb_pk primary key (ordinv_id) ;
--
create unique index ordinv_scinv_uix on ordered_inv_bkp(
SCP_ID ASC,
[code]....
-- Next, we have to create a partitioned table ORDERED_INV_T with a similar
-- structure as ORDERED_INV.
-- This is a bit tricky, and involves a pl/sql code
declare
l_dt_start DATE;
l_ptn VARCHAR2(50);
cnt PLS_INTEGER;
l_cnt_initial PLS_INTEGER;
ts_name VARCHAR2(50);
l_sql VARCHAR2(10000);
ts_indx VARCHAR2(100);
[code]....
-- Add section to set default values for the intermediate table OL_ORDERED_INV_T
FOR crec_cols IN (
SELECT u.column_name ,u.nullable, u.data_default,u.table_name
FROM USER_TAB_COLUMNS u WHERE
u.table_name ='ORDERED_INV' AND
u.data_default IS NOT NULL )
LOOP
[code]....
-- Next, use exchange partition for actual swipe
-- Between ordered_inv_t and ordered_inv_bkp
-- Analyze both tables : ordered_inv_t and ordered_inv_bkp
BEGIN
DBMS_STATS.GATHER_TABLE_STATS(OWNNAME => 'HENRY220', TABNAME => 'ORDERED_INV_T');
DBMS_STATS.GATHER_TABLE_STATS(OWNNAME => 'HENRY220', TABNAME =>'ORDERED_INV_BKP');
END;
/
SET TIMING ON;
[code]....
View 2 Replies
View Related
Jan 3, 2013
I have enabled SSO for my application. It was working in 4.1 version. I have upgraded to 4.2 now and the same code doesn't work now.I have created an authentication scheme where i check if a particular person is an employee based on a flag. If he is, then I return 1 to the authorization scheme i have created. This always returns 0 even if the flag is set to 'Y'. I have tried hard coding the user_id as well. It doesn't work.
I tried printing the :APP_USER but it does not give any output.
View 1 Replies
View Related
Oct 11, 2012
C:>sqlplus
SQL*Plus: Release 10.1.0.2.0 - Production on Thu Oct 11 09:56:23 2012
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter user-name: sys as sysdba
Enter password:
Connected to:
Oracle Database 10g Release 10.1.0.2.0 - Production
SQL> startup nomount;
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> shutdown immediate;
ORA-01109: database not open
[code]...
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL>
View 8 Replies
View Related
