i'm using form 6i and oracle databse 10g i want to insert an image into database field(BLOB) from scaner or camera
i have been search about this in this forum but no thing
any example
My Email :[URL]....
i need scan image from oracle forms 10g by using scanner.
View 2 Replies View Relatedi want to insert a image in database using form(using browse button), when i use commit_form,all text data are saved but image file is not save & form has also not given any error.
View 5 Replies View RelatedI create a simple table for image
CREATE TABLE image_table (
Design_no varchar2(10),
filename VARCHAR2(255) PRIMARY KEY,
image LONG RAW);
Then i create simple block of image_table
its show me in this website [URL] My question is i don't want to give my form path always.i want to save my picture path in my database and the name of my picture always same as my design_no column.
For example i want to save a picture in my database i will copy my picture in d:shahzaib1234.jpg now i want the path d:shahzaib save in database and when i copy my picture which path= d:shahzaib and file name = Design no its will automatically save in database.
How to scan paper by scanner to oracle forms 6i.
View 1 Replies View RelatedI am making a form in which i could intigrate with scanner to capture image and stored it database. I also want to use OCR too. I am making document management System. I want to know how can i directly get connected with with scanner image to save it at runtime.
View 1 Replies View RelatedIs there any way to connect any scanner to the Form 6i. Before someone made Fujitsu scanner Fi 5120C to work with Oracle form that if a button is pressed, the scanner will scan the document which is placed inside it and saved in DB in blob column. But now this scanner is obsolete and discontinue. I don't know how that programmer had done because I didn't find any huge coding behind that button except the HOST (default procedure) and an exe file.
PROCEDURE Do_Image (MailId IN arc_mails.mail_id%TYPE,
IMode IN VARCHAR2) IS
DepName VARCHAR2(100);
[Code]....
i want to input data from thumb scanner in my form. how to use it ?
View 6 Replies View RelatedI need to copy some text value in to a multi-line text item on the current cursor position.
View 8 Replies View RelatedI want to store file from form to database:
1. what is the good way (best solution) to store file means into Database or folder on sever.
2. In either case how can we do it means i need in detail on both sides (means on form side and also on database side).
3. Every file related to a record and may contain 1 or more then 1 files and maybe update files for one record many time and we must keep track of each update.
i want to create a simple form in this form i want to upload the image on the image item with browse button that open a diaglog box that go to the image i select the image and this image is display on image item on the form.
View 1 Replies View RelatedI have successfully Stored image file in Oracle 10g Database Table using Forms 6i. But I cannot retrieve that image and display on Forms 6i. Image Item on Form is not a database Item.
View 8 Replies View Relatedi m getting some problam to display image in forms 6i.
i hv two tables
1st is empmst
emp_code number(5) not null (PK)
emp_name varchar2() not null
2nd is emppic
emp_code number(5) not null (FK of empmst)
emppic blob not null
i create a master detial form and save the data in tables
whn u execute query i m unable to get the pic..
I have a db field "image" of type BLOB and I save the contents to a file on a local folder c: example.bmp.
I found numerous examples
BEGIN -
Get LOB locator
SELECT image INTO l_blob pc_immagini_blob FROM WHERE code = WCI;
- Open the destination file.
l_file: UTL_FILE.fopen = ('C: Temp', 'EXAMPLE.BMP', 'w', 32767); -----> error
The db is not local but on an application server, the image must be saved to c: the client.
i save image in oracle databse but how can i call this image another form of oracle 6i froms
View 1 Replies View Relateduploading an image item which is not a database item from the operating system. I am using forms 10g on db 10g. My platform is windows Vista sp1.
I am trying to use
GO_ITEM('BEEEE');
Set_Custom_Property( 'SALGRADE.BEEEE',1, 'READIMGFILE', 'C:/users/ajayia/Desktop/Beeee.jpg' ) ;
But I just get a blank image on runform. I am using WHEN-NEW-BLOCK-INSTANCE trigger. I have tried it on when-new-form-instance, but also not working. The file am trying to upload is a JPG file format, but i cant find the file type in forms image item property. What can I change it to. Or how to i go about changing it.
I am trying to insert an image files into a blob column using the following code.
CREATE TABLE MY_IMAGE_TABLE (
ID NUMBER,
NAME VARCHAR2(20),
IMAGE BLOB);
CREATE OR REPLACE DIRECTORY MY_FILES AS '\dppdb-dev est';
GRANT ALL ON DIRECTORY MY_FILES TO PUBLIC;
[code]....
However, I am getting the this error
ORA-22288: file or LOB operation FILEOPEN failed
I've done some tracing on toad and it seems that the file am trying to insert exists yet am unable to open it.
I have a table with a column type long raw. Now i want to insert an image from directory by an insert statement. Is it possible?
View 2 Replies View Relatedin my forms,1 block(multi record)) which has 5 database columns(c1,c2,c3,c4,c5) and 1 non-database column(s1).Forms shows column c4 ans s1. I use populate_list on s1 column on basis of value c1,c2,c3 using system.mouse_record to fetch respective record values in the list.
but getting problem of list pop up size and return value on selecting value from pop up list. means clicking on 1st record and selecting value(e.g val1),its return "val1" after that clicking on 2nd record and selecting value(e.g xyz),its return "xyz" but at that time 1st record value become "xyz" instead of "val1".mns its replace all values with current selected value from the list.
Original code for reference as below.
---------------------------------------
PROCEDURE S_VALUE_LIST IS
rg_id RecordGroup;
lst_id Item := Find_Item('SNSPECMST.S_VALUE');
ERRORCD NUMBER;
t_srno1 number := 0;
t_srno2 number := 0;
t_srno3 number := 0;
BEGIN
[code]...
i have a single form three database field
i want when i open a form in exceute mode then only a single field it does not show any data from database
means query not allowed in that particular field
how it is posible
I remember a method in which I used a property in the property pallete to specify the query in which i wanted the list linked with, it gave me the option to input a static list or as mentioned a dynamic list which was dependent on a query entry, but I cant for the life of me remember where this property was.
View 4 Replies View RelatedI have a requirement to take pic from a cam window and save it to forms field in database.
View 2 Replies View RelatedI currently have a field in which the user inputs a number, but before this number is allowed to be saved to the database it has to be checked to see if the number is already stored in a different field within the database. For example, if the number is not in the database the user cannot put that number into the field.
I do want it to be user input so I don't want a LOV linked to the appropriate field in the database.
Is below anyway close to the way it should be done? For some reason seq_rec.seq seems to give me 3 and doesn't seem to compare it with each of the values in the database.
DECLARE
cursor seq_curs IS SELECT SEQ FROM ZZJOB;
seq_rec seq_curs%rowtype;
none_existing_seq EXCEPTION;
invalid_seq EXCEPTION;
return_alert NUMBER;
[code]....
Just say the field in my database has numbers: 1 2 3 4 and 5 in the field that i allow the user to input data they can only enter 1 2 3 4 or 5. Hence the check needs to be made with te database field to check if the input number is already in the database.
P.S. they are separate fields for different things, the numbers just need to be in one field before they can be added in the other.
I have task. I am using oracle forms 6i. I want to import excel data to oracle forms(its common task using ole2 package). But this time I want to map the columns i.e my database table having 5 columns. and the excel file is having 2 or 3 columns then i suppose to map those columns and accordingly insert it to my table.
So far i have import column heading of excel to oracle forms, then i've provide list item for mapping each column. so that user can map excel column to database columns. Now I am confuse how to write the code so that selected columns should get inserted into database.
-more details
I have table with columns id, name, location, address, plan. in those columns i need to insert records form excel. user having a excel with 3 columns col1, col2, col3. on the form i've fetch column headers of excel and in front of that i've provide database column list , so user can match excel column with database column. e.g.
COL1 --> list value of database column
COL2 -->list value of database column
COL3 -->list value of database column
Once user map those column i want to insert those values into my database table (table with columns id, name, location, address, plan). and i am confuse about this code.
I have a form and 2 blocks(master-detail) and try to add a new record when I press "insert record" button from toolbar. But there occurs a problem. If I don't write 'CLEAR_FORM' just after calling "button_proc" procedure, record is not added into database.I couldn't understand why.
View 8 Replies View Relatedi've following code
declare
i INTEGER:=0;
flag boolean:= FALSE;
vcInsert:='INSERT INTO CRM_DELT_IMPORT (';
if length(i_vcColumn1) > 0 then
flag:=TRUE;
[code]....
i am fetching data from excel all data is of general type, here i am passing value is VTDATE varchar2(100) but actual database column filed is DATE , How can i pass '13-06-13 05:54:33' to database table.
if i put this condition
vcInsert:=vcInsert|| ','||''''||i_ldata(i).to_char(VTDATE,'DD-MM-RR HH12:MI:SS')
i get the error
to_char must be declare.
if i remove this line
i am getting this error ORA-01843: not a valid month
I have a datablock based , I used commit_form(); to insert data in my DB .But,I want to insert data into my DB on uppercase format!!
View 3 Replies View RelatedOracle 11.2.0.3 on Linux.
I need to execute this insert as select:
INSERT INTO TAB1 (SQL_ID,SQL_FULLTEXT)
SELECT DISTINCT t.sql_id, t.sql_text FROM DBA_HIST_SQLTEXT;
But I get this error:
ORA-00932: inconsistent datatypes: expected - got clob
This is TAB1:
SQL_ID VARCHAR2(13)
SQL_FULLTEXT CLOB Y
SQL_CUSTOM_HASH VARCHAR2(60) Y
Should I user dbms_lob package? Is so, I do not understand how.
What I need to do is redirect an insert to another table when a field has some value. This is what I have:
CREATE TABLE TEST.TEAMS
(
NAME VARCHAR2(255 CHAR),
[Code]....
This is the result when I try to insert a record
INSERT INTO TEST.TEAMS ( NAME, LOCATION, PLACE ) VALUES (
'Belgrano', 'Cordoba', 1);
ORA-04091: table TEST.TEAMS is mutating, trigger/function may not see it
I need to copy records from a working table to a history table. I have the following sql statement
insert into test.history
(equip_ID, state, manufacturer, install_year, capacity,
group_ID, Test_status)
select (equip_ID, state, manufacturer, install_year, capacity,
group_ID, Test_status
from test.info_AP
Table test.history has one more field in it called test_year. I need to fill this field when I do the insert. Can't use an after update trigger as the field is currently set to not allow nulls.