How do you refresh a datablock after DML operation(s) - INSERT, UPDATE or DELETE? I know "EXECUTE_QUERY" retrieves records, but what trigger do I use to automatically refresh the datablock after these operations - my form only has 1 datablock.
View 3 Replies
I have created the 5 Level Hierarchy Tree using the Tree example
[URL]........
how-to-s/ forms- how- to- create - a- hierarchical - tree-form".
My requirement are
1. I wish to refresh the Hierarchy Tree after DML Operation.
2. I wish to Query the Record when i will select the node.
I have 5 Master Detail Record as:
Master - Detail
Detail Master -- Detail
Detail Master -- Detail
Detail Master -- Detail
Detail Master -- Detail
3. Is there any way to find out which Hierarchy Level currently selected
4. Is there any way to find out which value is for what block.
I have one plsql table which is having 10,000 rows, i want to populate this values in a forms datablock, i have used the below query in pre-query of that block
declare
plsql_rec pkg.plsql_tab;
begin
plsql_rec := pkg.func;
set_block_property('blk_name', query_data_source_name, 'select e.ename, e.empno from table(plsql_rec) e');
end;
in the property of the block i set like below
Database Data Block = YES
Query Allowed = YES
Query Data Source Type = FROM clause query
Query Data Source Name = SELECT 1, 2 FROM DUAL
but while executing it says invalid identifier "plsql_rec",
i want to decode a column(aan_status) of a datablock based on table. the column have value in the form of 0 and 1, and i want to display this value as yes(0) or no(1) on my oracle form. how can i do this and where should i put my code???
i tried this by
set_block_property('aan_occupant_vu', DEFAULT_WHERE, qry1);
go_block('aan_occupant_vu');
clear_block(no_validate);
SYNCHRONIZE;
execute_query;
[Code]...
but if else part of my code is not working, as i got the data still in 0 and 1 format, not in 'YES' or 'NO' format.
I am developing an application for making the travel entries for my organization employees.
For that purpose I have 3 datablocks named:
1) Travel header
2) Employee Detail
3) Travel Detail
which are interlinked through constraints.
I want to give 2 options ie. either single booking entry or Group booking entry.
The form is working properly for single booking entry. But when I want to make a group booking wherein many employees have to travel between common locations I have to fill all the travel details again for all employees. I want to avoid that since it wont give a feasibility for this application. I can copy the travel details I have entered for the 1st employee. I am uploading the form layout.
declare
cursor c1 is select distinct edt, regno, name, desgn, form_no, form_status, recd_on
from ol_registration_vu
where RECD_ON between :control.REC_FROM and :control.REC_TO ;
[Code]....
this coding giving me only one record i.e the last record of the table, whereas the table has 50 records. how can i get all records from the table in the form datablock.
I've got a problem with binding my selected data from one data block to another. When I'd finished selecting my data(subjects in this case),
and I clicked schedule button, my selected data were not bound into the textboxes in schedule datablock.this what happened.the code i used in when-checkbox-changed trigger:
BEGIN
IF :NEWSTUDENTS.cb_subj = 'N' THEN
Clear_record;
ELSIF :NEWSTUDENTS.cb_subj = 'Y' THEN
:SCHEDULE2.Subject := :newstudents.subject_code;
END IF;
END;
and in tree-node-activated trigger:
MEssage('FOR LOOP - subj_code = ' || subj_rec.subject_code);
:NEWSTUDENTS.subject_code := label_of_mynode;
:NEWSTUDENTS.subject_= subj_rec.subject_code;
:NEWSTUDENTS.units:= subj_rec.units;
MESSAGE('POSITION OF CURSOR ' || :SYSTEM.CURSOR_RECORD);
[code]....
I have designed a form in which there are two datablocks one contains the major details and the other contains details saved under that record. And it is working properly. If you are not getting then take an example of department and employee datablocks, first contains the info of department and second contains the employee info working in that department.
now what i want to do is to make the life of user easier, as the records are displaying properly so if user want to know that this record is present in the details of that header so while scrolling all records can he search by putting some info in the detail block to get that result while remaining on the same datablock?
i am populating 3 records in my data block.i do not want more than 3 rows.but when i click the plus icon in form menu one more row is getting generated which i do not want. i can restrict the new record addition through plus icon in menu bar for a particular block.
View 1 Replies View RelatedMy procedure proc_ex is in when_validate_item trigger
I have one Multi Record data block in my form with values in its items
I need to Populate multi record block values to one Record Group using
add_group_row,
add_group_column,
set_group_char_cell to populate values to record group
Let us suppose my multi record data block looks like
item1 item2 item3 item4
10 20 50 70
25 15 30 45
45 90 47 38
75 25 85 90
30 56 78 80
how to populate these multi record datablock values to Record Group ???..Eagerly waiting for your Replies
My Application is running on the unix server - user oracle. My DB is in different unix box. I had created the folder called OUT with the permission of 777 in DB server. I created ORacle Directory DMPDIR for that folder /OUT. and executed grant read/write to that schema.
1) when i use the below code in sqlplus its writing the file into that folder.
DECLARE
vInHandle utl_file.file_type;
vNewLine VARCHAR2(4000);
[Code].....
But, when the same piece of code is executed from the package ( which called from the application)its throwing the ORA-29283: invalid file operation.
even i am able to copy the files into that folder with the user oracle.
I am getting ORA -32320 when I tried to fast fresh MVs that were truncated.I am able to complete refresh all MVs. However, some MVs are still giving me ORA-32320 when I try to do fast refresh even after complete refresh.
DBMS_MVIEW.EXPLAIN_PLAN says the MVIEW can be fast refreshed.
ERROR at line 1:
ORA-32320: REFRESH FAST of "dev"."Claim_line" unsupported after cointainer table
PMOPs
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 841
ORA-06512: at line 1
Quote:ORA-32320:
REFRESH FAST of "string"."string" unsupported after container table PMOPs Cause: A Partition Maintenance Operation (PMOP) has been performed on the materialized view, and no materialized view supports fast refersh after container table PMOPs. Action: Use REFRESH COMPLETE. Note: you can determine why your materialized view does not support fast refresh after PMOPs using the DBMS_MVIEW.EXPLAIN_MVIEW() API.
how to again make the MVs fast refreshable?
Am running forms 10g on windows vista service pack 1 and am having problems with the FRM-40514 error. (Operation requires a database connection).
I can connect quite alright from form builder, but when i run a form it request for login credentials again. I dont understand why this is so, when am already logged on in form builder.I tried to tacke this by creating the following
DECLARE
Uname VARCHAR2(80);
Pword VARCHAR2(80);
cn VARCHAR2(80);
BEGIN
--pause;
--logout;
--message ('Logging out');
--synchronize;
[code]....
This code suppreses the logon screen and runs the form without logging on to the database. I know this because when I try to enter and execute query it brings up the message: FRM-40514: Operation requires a database connection.
My issues is when I changes the data in Header block the detail block should corresponding data immediately related to header on the detail lines.
The form is based on master detail relationship.
i need a code to auto refresh or after 1 minute in form & report when the data is updated. basically i am deploying the plasma tv in hall so executive can see the status report where they need its going to be like a stock system multiple forms or reports sticky dynamically change .
View 2 Replies View RelatedHow and where to set Auto Refresh on Custom Form ...?
View 1 Replies View Relatedi want to make a list item from query..i have a form on emp
the list item is on deptno showing the department name its work fine the form are opened when the user enter the new empno they need a other department
the others users or same user are inserting the department from master form
user open the list item it will not show the inserted values until they have to reopen the form because the trigger code inserted on when new form instance but i need a refesh list when user click on list item without reopen form or any refersh button
run down of the implications of MERGE by ROWID in such a fashion:
CODE MERGE
INTO XXWT_AP_ACCRUALS_RECEIPT_F EXT
USING (
SELECT PO_DISTRIBUTION_ID,
[code]...
Can this lead to an "Unstable Set of Rows?". Is it possible for the ROWID's to change during the execution of this statement - meaning certain ROWIDs identified in the SELECT will not actually be updated when it comes to the MERGE operation?
Basically, is it sound practice to use ROWID to merge on - in cases where you dont have a WHEN NOT MATCHED condition?
I am using the dblink to merge the data. I am using the following merge statement.
merge into APP_USER.USR_NEW_RIGHTS@NEW_RIGHTS t
Using (select 'test' GRANTEE,'TESTxxx'ROLE from dual ) s
on (t.GRANTEE = s.GRANTEE and t.ROLE = s.ROLE)
when not matched then
insert (ID,GRANTEE,ROLE,XRIGHT,COMPANY,OWNER,TABLENAME)
values ('','test','TESTxxx',null, null, null, null);
I know that I have to set a commit and it's working when I insert information's with a normal insert statement via database link, but it seems that merging doesn't work.
What are all the DML operation can be done in DUAL table.?
View 5 Replies View RelatedI have a source view where I have some invalid records and those should be found based on codes present in another table.
For eg. from source the records come like
****************SIINNSFDFD****FDFDF2******8
**********TABLE****************FDFSFSSFASFAS********
and if my reference table has values
SIINNSFDFD
TABLE
then these values are present as substring in the particular column in the source view. So I need to flag those records. For every record, I need to check whether all the values present in the reference table matches or not. If it matches then it should be flagged.
I can use in operator as we are not checking for the exact match and we are checking whether that value is present anywhere in that column record.
Looping results in performance issue. We can use PL/SQL for this. As the source view is put into a ETL internal file.
i have created an file in my local system (sys name : System1). i have created a directory as below
SQL>CREATE DIRECTORY test_dir AS '\System1TEMP';
I gave rights as
SQL>GRANT ALL ON DIRECTORY TEST_DIR TO PUBLIC;
DECLARE
fileHandler UTL_FILE.FILE_TYPE;
BEGIN
IF utl_file.is_open(fileHandler) THEN
utl_file.fclose_all;
END IF;
[code]......
but while executing the above procedure, Invalid File Operation error occurs.
I want to create one sql script with the followings-
1.Show the values before the operation is performed
2.Display the values after the operation is performed.
How it can be done in a proper sql script format.
Frequently getting below error in alert log file. to sort out this issue.
Database: Active standby database
OS: Windows Server
Db Version: 11.2.0.2
Error:
***********************************************************************
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.2.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.2.0 - Production
[code]...
I have a car table with the following attribute sale_code,model_car etc. the format of sale_code is year/number example when a client buy a car(model_car=mercedes) her code is 2012/0125.
I want to calculate the number of cars that were sold in the year of 2011 grouped by the model_car attribute.
select count (sale_code),model_car
from car
where sale_code like '2011%'
when I tested this query i received an error.
My question is :
how to resolve the issue when we use an attribute in where and we use the same attribute in count operation ?
I am working on an SAP application migration project using Oracle 10.2.0.2 database. We are migrating the application from Windows to Solaris.
During the process we are facing problem with very slow insert operation on a particular table.The server's capacity is very good and so no resource bottleneck.
The table contains around 2,70,000 rows and inserting at around 100 rows per 10 seconds.
The table contains following data types.
SQL> desc SAPDATDB.CAF_GP_VALDEF;
Name Null? Type
----------------------------------------- -------- ----------------------------
VAL_UUID NOT NULL NVARCHAR2(34)
VAL_GUID NOT NULL NUMBER(10)
VAL_CLOB NCLOB
When I try to call a database procedure written in Oracle 8.1.7.4.0 with OUT parameter and COMMIT statement from my Oracle 10g environment, I am getting error like "ORA-02064: distributed operation not supported".
I cannot omit OUT/COMMIT statement from the procedure because it is also updating another table from called procedure. I have tried some solutions from my end, but it is not working and same error generating. Like:
1) Moved the update statement with COMMIT statement to another procedure and calling that procedure from main called procedure
2) Creating a job to run the newly created procedure and submit the job from called procedureetc.
I had added a new disk into disk group DATA1 with rebalance power of 5, it ran as estimated for about 2 days long, I can see the estimated time down to zero but the process never end.
The command used:
SQL> alter diskgroup DATA1 add disk '<path>' rebalance power 5;
Below is the disk status:
SQL> select group_number, disk_number, total_mb, free_mb, mount_status, header_status, state
from v$asm_disk where group_number=1 order by disk_number;
GROUP_NUMBER DISK_NUMBER TOTAL_MB FREE_MB MOUNT_S HEADER_STATU STATE
------------ ----------- ---------- ---------- ------- ------------ --------
1 0 1191626 314236 CACHED MEMBER NORMAL
1 1 1191626 314230 CACHED MEMBER NORMAL
1 2 1191626 314232 CACHED MEMBER NORMAL
1 3 1191602 314229 CACHED MEMBER NORMAL
1 4 1191626 314210 CACHED MEMBER NORMAL
1 5 1191626 314218 CACHED MEMBER NORMAL
1 6 1191626 314218 CACHED MEMBER NORMAL
1 7 1191602 314223 CACHED MEMBER NORMAL
1 8 1191626 314216 CACHED MEMBER NORMAL
1 9 1191626 314202 CACHED MEMBER NORMAL
1 10 1191626 314230 CACHED MEMBER NORMAL
[code]....
I've checked and follow the status for a few days more, it still running with EST_MINUTES=0. I think it was hang and never end.During the next few weeks, I've manually restarted the rebalance process by modifying its power to 6, 8, 10
SQL> alter diskgroup DATA1 rebalance power 10;
After every restart, the diskgroup rebalance again but has the same issue, never end.Here is the content in the alert log
NOTE: starting rebalance of group 1/0x9d2529a0 (DATA1) at power 5
Starting background process ARB0
Fri Sep 16 12:01:11 2011
ARB0 started with pid=15, OS id=21066
Starting background process ARB1
Starting background process ARB2
Fri Sep 16 12:01:11 2011
[code]....
As you can see, the rebalance process started 3 days ago, hanging till now
SQL> select group_number, operation, state, power, est_minutes from v$asm_operation;
GROUP_NUMBER OPERA STAT POWER EST_MINUTES
------------ ----- ---- ---------- -----------
1 REBAL RUN 5 0
I have a type to table where only few columns are SCD 2. Like address, city, zip.I wrote a code using cursor. But now the requirement is to replace the cursor .how to perform type 2 using Merge in oracle 10g or any better way to perform it without using cursor. Look the code which i have attached with cursor.
CREATE OR REPLACE PROCEDURE Proc_cp_jci_contract_dim_hist
IS
l_fun_ret_value NUMBER;
v_src_id NUMBER;
rec_jci_contract_dim jci_contract_dim%ROWTYPE;
rec_jci_contract_dim_hist jci_contract_dim_hist%ROWTYPE;
err_row VARCHAR2(4000);
ind NUMBER(1) := 1;
[code]....
We are using the below procedure to generate the files on the DB server.
SQL>
SQL> create or replace procedure write_to_file(p_dir varchar2,
2 p_file varchar2,
3 p_mode varchar2,
4 p_clob clob) as
5 l_output utl_file.file_type;
6 l_amt number default 32767;
7 l_offset number default 1;
8 l_length number default dbms_lob.getlength(p_clob);
9 new_clob clob;
10 BEGIN
11
12 l_output := utl_file.fopen(p_dir, p_file, p_mode, 32767);
13 while (l_offset < l_length) loop
14 new_clob:= SUBSTR(p_clob,l_offset,l_amt);
15 utl_file.put_line(l_output, new_clob,true);
16 l_offset := l_offset + dbms_lob.getlength(new_clob);
17 end loop;
18 utl_file.new_line(l_output);
19 utl_file.fclose(l_output);
20 end write_to_file;
21 /
Procedure created
SQL>
This works fine we call this from PL/SQL developer tool. However, when this procedure is called from Java JDBC, it is giving error
java.sql.SQLException: ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
ORA-06512: at "SYS.OBP_UPGRADE_UTIL", line 2816
ORA-06512: at "SYS.OBP_UPGRADE_UTIL", line 3029
ORA-06512: at line 1
DB schema used for both are same (SYS) Verified the directory on the DB server This Procedure called from package with AUTHID CURRENT_USER option.
