We have placed Stack canvas on tab canvas. The Stack canvas will be visible/Invisible based on some condition dynamically. The Issue is When you show the stack canvas by using Hide_View('Canvas') , the stack canvas is shown on all tab canvas instead of displaying in the first tab canvas.
How to over come this issue and can we place stack canvas on tab canvas?
Can we place tab canvas in content canvas?i have created one header section based on content canvas.next line level i need to display tab.how can i do this?
View 1 Replies View RelatedI want to create a tabular type form on a tab canvas.. but my fields are often out of the form range. i want to create a stack canvas on tab canvas but it say that stack canvas and tab canvas must be created within content canvas.
how can i manage it what can i do now. i also attached pic of my tab canvas. i show some fields on tab canvas and 3 more fields i inserted on this canvas. And i can't reduced the width of my fields.
i have a form based on tab canvas. for some values(on form) i am hiding some fileds or a complete frame on the form using stack canvas. it works fine but if a user enters a wrong value in some field i.e enters character in number field the stack canvas hides(showing the hidden fields).
I tried to use on error trigger at form level and when validate item trigger to show the canvas but it first hides the canvas once right value is entered it just shows canvas again. following is the code i wrote
IF MESSAGE_TYPE = 'FRM' AND MESSAGE_CODE IN ('40209','50016')
AND :SYSTEM.TRIGGER_ITEM IN (some field)
THEN
IF other_item_value = 'E' THEN
SHOW_VIEW('STK_CAN_ARL_INFO');
END IF;
I need not to hide the canvas in any case whether any other field on the form is validated or not.
is there any method in placing a stacked canvas inside a tabbed canvas ?
View 8 Replies View RelatedI have Table that save a color (specific color) , i want to change this color for all forms included windows and canvases at Runtime (by Code) .
My problem is : i can't move from canvas to canvas to change its color ( name of canvas ) - no next canvas code - like next block?
I have tried enough to put Tab canvas on content canvas so that they can appear in the same window. I have tried on internet and unluckily find only
[URL].....
I didn't understand how to do it.
I've a 2 stacked canvases(canvas_live_appmnt, canvas_cancelled_appmnt) and Tab canvas(cc_main).Now I need to move the stacked canvas on the Tab canvas.I tried writing the When-tab-changed trigger as follows: In the below code I was trying for only one of the stacked canvases.
DECLARE
L_LOCAL_TP_NAME VARCHAR2(30);
BEGIN
L_LOCAL_tp_name := GET_CANVAS_PROPERTY('CC_MAIN',topmost_tab_page);
IF L_LOCAL_tp_name = 'LIVE_APPOINTMENTS' then
SET_VIEW_PROPERTY('CANVAS_LIVE_APPMNT',VISIBLE, PROPERTY_TRUE);
--SET_VIEW_PROPERTY (FIND_VIEW ('CANVAS_LIVE_APPMNT'), DISPLAY_POSITION, 0 , 325);
ELSE
SET_VIEW_PROPERTY('CANVAS_LIVE_APPMNT',VISIBLE, PROPERTY_FALSE);
END IF;
END;
I have a form with 2 content canvas. each canvas has its own windows.
canvas A is for inquiry person name
canvas B is people detail returned from first canvas.
now my problem is only A is showing when form instance
question: after open form, how to make both of canvas showing out. A active and B show behind
I want to call another canvas in same window.using this code /it not work show_view('canvasname');
View 1 Replies View RelatedI have an form with a few canvases already in it. The problem is that I want to see a particular canvas which shows the toolbar at the top of the window but it dosent show up on the form. I checked the property palette and the canvas is visible. There is also an other canvas right at the top of the form. How do I move the other canvas down if this is covering the toolbar canvas. How do i move the canvas down as it dosent show any X position in its property palette.
View 1 Replies View RelatedHow to call the canvas from the menu module on which the form linked to the menu items.
The canvas lies in the same form where menu is attached.
I have a tab canvas with 4 tab pages.I want to set scroll bars for each tab page. I draw 4 stack canvas on 4 tab page but it doesn't transferred fields in each tab pages.
View 4 Replies View RelatedI use forms10g in windows xp, i create a tap and toolbar canvases in content canvas but at runtime i can see only toolbar canvas.
View 1 Replies View RelatedI'd like to hide my stacked canvas. This is my scenario, i have my content and stacked canvas on the same window. When i click a button on the content canvas it will display the stacked canvas, this is the code that i used:
SHOW_VIEW('CV_STACKED');
And on my stacked canvas, i put a button close and fired a when-button-pressed trigger,
HIDE_VIEW('CV_STACKED')
supposedly, it should hide the stacked canvas, but it doesn't hide. i tried SET_VIEW_PROPERTY('CV_STACKED', VISIBLE, PROPERTY_FALSE)
How to call the canvas from FORM A to FORM B . Form A contains canvas 'can_test'
Form B contains canvas 'can_sub'
I want to call 'can_test' from 'can_sub'
How to achieve this one?
is that datablock should have related to show the stacked which is hidden in content canvas
i have attached the stack.fmb
I have a problem while changing in a form canvas color
i make some modification in a form. The layout color of the canvas is blue. i want to change the layout color of it to default (<unspecified>) (which is the default color).
when i change in the property pallet the background color to <unspecified>. it give me that error FRM-12305 color by this name doesn't exist and i want it the default color.
how can i do it without recreating the form from the beginning.
I am using Forms 6i in Oracle Applications, In the button click event i used set_canvas_proeprty() twice. First time it executes these two statements, second time it does not. If i use any message() statement before these two statements, it executes.
Do we have wait() statement in Forms ?in apps we have app_item_property.set_property(), can we use same command to set canvas property also.
i need to position my canvas at run time.
View 3 Replies View RelatedI have 3 canvases ---> X ( Content), Y ( Stack) and Z ( Stack) which has 3 blocks BX, BY, BZ resp.
WHEN-NEW-BLOCK-INSTANCE trigger of BX :
execute_query;
show_view('Y') ;
Now X and Y both canvases are displayed.
[code]....
Now only X is displayed. Canvas Y is vanished after a single blink. But I require both canvases as in initial stage.
I need to display my alert prompt right after I detect the discrepancy on amount. I place my code on POST-BLOCK. The problem is, after the query, the alert pops out right before the new canvas where the block with POST-BLOCK trigger shows.
I need to display first the canvas before the alert but seems like the process of displaying canvas is the last job oracle does. So even if I place my code on post-record or any other trigger it will be the same.
i am trying to use read_image_file property , and it worked ,but unfortunately , the image is not adjusted with the canvas,
i changed the sizing style property to (adjust) , but also vainly , it is not adjusted with the canvas
I have a form that contains a tab canvas. On the second canvas page I have two data blocks with a master detail relationship.The first block (master) is driven by a table (table_one) with the following fields:
sf_id (PK)
sf_code - VARCHAR2(40)
sf_desc - VARCHAR2(250)
The second block (detail) is a repeating block driven by a table (table_two) with the following fields:
error_code - VARCHAR2(40
error_code_desc - VARCHAR2(250)
is_major_error - VARCHAR2(1)
error_type - VARCHAR2(1)
error_is_active - VARCHAR2(1)
update_date - DATE
sf_id (FK - table_one.sf_id)
The second block only shows error_code and error_code_desc. The point of this canvas page is to add/remove master records and associate detail records with a master. I never want to actually insert or remove records from table two; merely updating the sf_id column in table two.What I am trying to achieve is the following:
1. Create a master record with detail records at the same time.
2. Delete a master record
3. Add and remove detail records
An insert into the detail block is nothing more than associating a master record with a detail record by updating the sf_id column in table two. A delete from the detail block is nothing more than setting the sf_id column to null in table two. I am not actually adding or removing records in table_two.
I have tried overriding the commit on the second block to perform updates instead of Oracle actually trying to insert NEW records into table_two.
I am facing one confusion with canvas changing and message displaying issue i have one login page. in that there are three fields username,password and department in the department i having 5 departments including salesandmarketing
the requirement once i entered every credentials correctly and i am logging in as salesandmarketing. When the salesandmarketing canvas opens a message should display saying "you are successfully entered into sales and marketing".
i have my home page as content canvas and sales and marketing as tab canvasi need to do the same message when i am entering into 5 departments with corresponding department name in the message end instead of salesandmarketing
is it possible to do with when_new_canvas
The Background colour of the canvas is "gray" i want to change it to default.
View 4 Replies View RelatedWhat steps should I use in the data block wizard to create a content canvas and a tab canvas that uses one data block?
View 1 Replies View RelatedI have attached the PDF file contains the stacked canvas disappear problem.
View 9 Replies View RelatedIs there a workaround to create a stacked canvas on a tab page?
View 2 Replies View RelatedI am modifying an existing form and wanted to do this with less number of modifications. The existing form has one checkbox item ( displayed and attached to database)..and its not in use ( was created for some enhancement that never implemented but code is there)..and in the form at several places its mentioned/calculated based on Updatabale/Enable/Queryable/Insert..all properties.
Since I want to use the same position of this check box so ..i simply detached the canvas from this item..it compiles fine but when login into application it gives al those errors like..FRM--item not update able.etc etc..
Is there any property to just hide an item inspite having related codes in the form ?
