Forms :: List Item Becomes Inactive After Using Once
Dec 6, 2012
i have a form having 5 listitems for making selections. once selecting through listitems i am adding this selection into below datablock by a ok button and saving it into database by a ok button. as i made one selection and press ok buttton it's working fine but after this when i want one more selection through listitems, listitems becomes inactive. it's not working after one selection. my coding on ok button is like this:
begin
select distinct lcode intolcode_ss from vac_view where locality=:vac_view.locality;
select distinct hid intohid_ss from vac_clr_vu where vr_no=:vac_view.vr_no;
:prop_temp.vr_no :=:vac_view.vr_no;
:prop_temp.qtr_type :=:vac_view.qtr_type;
:prop_temp.locality :=:vac_view.locality;
[code]....
may be it's all because of clear_list('vac_view.locality'); but i have to put this as i want to make clear all listitems after making each selections.
View 1 Replies
ADVERTISEMENT
Sep 27, 2011
I am creating the Dynamic list but when i am compiling the form it gives the compilation error "No list elements defined for the list item".
I can eliminate it by entering the dummy list element but this dummy value will be displayed at form run time.
View 1 Replies
View Related
May 22, 2010
I have 2 items in my form:
1) Text Item
2) Tlist
Upon form load, TList will be populated with predefined item. The behavior i am trying to achieve is to have a text item so user could entered specific text which will then filter the values in TList .
View 1 Replies
View Related
Oct 30, 2011
DECLARE
CURSOR GRP IS
SELECT RowNum rn, Letter_Group_ID||'-'||A_Desc AName,Letter_Group_ID
FROM Hrs_Group;
BEGIN
Clear_list('Letter_Group_ID');
FOR I IN GRP LOOP
Add_List_Element('Letter_Group_ID',I.rn,I.AName,I.Letter_Group_ID);
end loop;
END;
FRM-30351: No list elements defined for list item.
List LETTER_GROUP_ID
View 4 Replies
View Related
Nov 22, 2010
I am working on form 6i..
I have developed a form with some text items,a list item and a image item...
list item......account_list(values....company,individual)
text_item..... company_name..
text_item.....image_path...
i have attached a pop up menu to image item... Add image and upload image...
When i click on 'Add image' the image path is getting enabled.. it is fine but when i am changing the account_list i need enable and disable the 'Company_name' text item... How can i achieve this??
I have tried it in when-validate-trigger on account_list...
if account_list=individual then
set_item_property('company_name',enabled,property_false);
else
set_item_property('company_name',enabled,property_true);
end if;
But no use of this....
how can i achieve it??
View 5 Replies
View Related
Sep 7, 2011
how to create dynamic list item ????
View 5 Replies
View Related
Mar 1, 2011
I am populating the list item from predefined record group. the form is running fine but it didnt show the data present in the record group. I have placed the following code in Pre-Form trigger.
declare
list_id item;
rg_id recordgroup;
begin
rg_id := find_group('RECORD_GROUP9');
list_id := find_item('block2.list4');
clear_list(list_id);
populate_list(list_id, rg_id);
end;
View 7 Replies
View Related
May 20, 2010
I created one list item.which is populating values from list item query dynamically.If i select a particular value from list it will create new record.for the new record line i want to display list item as 'complete' (i.e not exists in the list).At this time i don't want the list also.How can i assign value to the list item in this scenario?
View 9 Replies
View Related
May 21, 2010
Is that any function or bult in there to find list item's currently selected index number.
View 4 Replies
View Related
Jan 28, 2011
I want to dynamically populate a list item such that the item list should show the name and its value should enter in the background.
I have tried by writing a query in record group, populated it. the list is showing the name in a list item which is not database item. On this List I have written a trigger which is fetching the value to another text item. It is working well but I am not convinced by this method.
for reference, i want if customer select A then list should show balanced and its value is 1when B then list should show lag,lead,advanced... values 2,3,4,.. respectively.
View 3 Replies
View Related
May 21, 2013
I have a multiple data block. There is a list item present on the form having three types INVOICE,BOE and MANUAL. When I select 'MANUAL' , that LOV should not appear for a particular item on the form and the user should be able to insert the value manually and validate manually. I did use set_lov_property, but did not get the correct usage.
I think set_item_property with VALIDATE_FROM_LIST property won't work as it sets the same property to whole column once it is fired. So if I write set_item_property for MANUAL it would set the the column, VALIDATE_FROM_LIST property at once when it is fired, not allowing me to the set properties for that column according to INVOICE and BOE where I would require the LOV. I want it to go with the item instance and therefore opting for set_lov_property but not clear with the syntax given
1) SET_LOV_PROPERTY
(lov_name VARCHAR2,
property NUMBER,
value NUMBER);
2) SET_LOV_PROPERTY
(lov_name VARCHAR2,
property NUMBER,
x NUMBER,
y NUMBER)
View 1 Replies
View Related
Jul 15, 2005
I have created a item, CO_NAME as List Item and list style is Poplist.
I have written following code in when-new-form-instance to populate the data from table to item.
DECLARE
rg_name VARCHAR2(40) := 'COMPANY';
rg_id RecordGroup;
[Code].....
But when I run the form, Oracle Error - FRM-41337:Cannot populate the list from record group.
View 2 Replies
View Related
Jul 31, 2013
i have a listitem, in which items populates as required but when i select any value out of these populated value, it is not displaying as selected, means i'm unable to select value from that listitem.
View 1 Replies
View Related
Dec 10, 2010
I have a list item with two values,0 and 1. However when i click on the list item scroll bar appears. My tester is saying for two items she doesn't need a scroll bar.
View 3 Replies
View Related
Oct 12, 2010
I have a form which contains two canvas.In the first canvas, i have a data block which contains two columns(database item of both are no). In second canvas i have a list item.
My problem is how to pass the value(s) of this data block to the item list which is present in second canvas.
The requirement user has given is such that the user will enter different categories, and in the second canvas where the main datablock is present, will contain a list item in data block which should show the data entered by the user.
View 1 Replies
View Related
Sep 12, 2011
i have created a small table which contains only name of cities.On form level i want to create a dynamic list of the name of these cities just by clicking on the textbox without doing any hardcoding.
View 25 Replies
View Related
Dec 15, 2010
I have two list items and from left list item values are populated to right list item through Add and Remove buttons and vice versa.My requirement is
1.) I need to sort the values of list item whenever a new element is added to the list item.
View 1 Replies
View Related
Jul 9, 2013
Oracle Developer Suite 10g
I want to create List item with time .
like in pic when I click on upper side at list item increase time and other side decrease time.
View 1 Replies
View Related
Aug 6, 2010
i want to popultate record in list item.... and write the follwing code...
PROCEDURE POPULATE_REC_IN_COMBO_BOX IS
RG_NAME VARCHAR2(500) :='RGGROUP';
RG_ID RECORDGROUP;
ERRCODE NUMBER;
BEGIN
[code].....
when i call this code then it returns the 2 errors:
1. FRM-41072: Cannot create Group RGGROUP.
2. FRM-41076: Error populating Group.
View 16 Replies
View Related
Oct 3, 2012
i am facing a problem in functionality of a form as there are different search parameters:
date from: text item-->mandatory
date to: text item---->mandatory
house type: list item-->optional
form_status: list item->optional
order by: list item---->optinal
untill i don't select house type by list item everything is working fine and gives desired result, even with house type if i select any house type result is fine but as i select last list item of house type which is null as i want result without house type then it gives no any data as data is present in database.
for example:
date from: 20-05-2009
date to: 21-05-2009
with these two i got the correct result, then i select
house type: 3
i got the correct result and when i change list item to any value like: 1,2,3.....it is working fine but as i want result without house type by selecting the null value in list item as:
date from: 20-05-2009
date to: 21-05-2009
it is not picking any data from database. but the same search criteria in 1st case as i described above giving result.
declare
qry varchar2(5000);
n number;
alert number;
[code]...
View 5 Replies
View Related
Nov 25, 2010
In the attachement, i have one record. if i click on the list_item then it is showing fully blue as background colour, but i want like if i click on the list item then only current value background should show as blue rest of the values white in background colour.
View 1 Replies
View Related
Feb 4, 2013
I have a problem in oracle forms. I have a block that displays five records in list item. On load, it will query two data in my table. So the list item (poplist) one and two enabled. (The default of oracle forms - List item one and two are enabled and the rest are disabled because one and two have data).
My problem was, what work around will I gonna do so that if I pressed the mouse in the third list item it will automatically enabled (for a new record) and if I pressed the list item one or two the third item will stay disable (even the fourth and fifth) because simply the user wants to update the item one or two in the list.
View 2 Replies
View Related
Apr 19, 2010
i want to make a list item from query..i have a form on emp
the list item is on deptno showing the department name its work fine the form are opened when the user enter the new empno they need a other department
the others users or same user are inserting the department from master form
user open the list item it will not show the inserted values until they have to reopen the form because the trigger code inserted on when new form instance but i need a refesh list when user click on list item without reopen form or any refersh button
View 4 Replies
View Related
May 9, 2012
How to get the label (not value) of current selection in a List Item.
View 7 Replies
View Related
Sep 14, 2010
We have a master detail form block A (master) contains an item, this item is in the record group's where-clause used to fill a list item on block B (detail block) (database item) we fille the list item in a pre-record trigger on the master block this works fine but when we navigate through the records in block a we intermittently get the following error : FRM-41337 : cannot populate the list from record group;
how should we filll our list item, in which trigger (when-new-record-instance of master block doesn't work correctly, the list item only gets filled after clicking it twice)
View 5 Replies
View Related
Dec 28, 2010
Actually m working on oracle 10g forms. I have a list item in which no. of records displayed is 10. I am populating this list item through a record group. I want when user select a value from first record then he should not be able to select the same value in further record of that list item.
View 12 Replies
View Related
Jan 6, 2011
I have a requirement to select multiple values from a list item and do some manipulations with those values. I tried by integrating the LOV with a text item, but couldn't able to select multiple items. Is there a way to do multiple selection in a list item ?
View 1 Replies
View Related
Jan 9, 2013
In my forms(version 9i), list item values showing with ALT + DOWN key combination but I want to change it to only DOWN key.I search this combination in FMRWEB.RES file but there isn't any entry of ALT + DOWN.
View 1 Replies
View Related
Jun 26, 2013
how should i populate table column heading in list items of forms? I've create lov to select the column, then i have 10 separate list items. once i select the table from lov then list item should get populated with selected table column.
View 2 Replies
View Related
Apr 19, 2010
how can we change the color of active & inactive Tab canvas dynamically. I am using Dev Suite 10gR2
View 2 Replies
View Related
