Forms :: Dynamic List Item
Sep 7, 2011how to create dynamic list item ????
View 5 Replies
ADVERTISEMENT
Forms :: To Create A Dynamic Item List
Sep 12, 2011i have created a small table which contains only name of cities.On form level i want to create a dynamic list of the name of these cities just by clicking on the textbox without doing any hardcoding.
View 25 Replies View RelatedForms :: How To Avoid (no List Elements Defined For List Item) Error
Sep 27, 2011I am creating the Dynamic list but when i am compiling the form it gives the compilation error "No list elements defined for the list item".
I can eliminate it by entering the dummy list element but this dummy value will be displayed at form run time.
Forms :: Filter Hard Coded Values In List Item (Tlist) Based On Value Entered In Text Item
May 22, 2010I have 2 items in my form:
1) Text Item
2) Tlist
Upon form load, TList will be populated with predefined item. The behavior i am trying to achieve is to have a text item so user could entered specific text which will then filter the values in TList .
Forms :: FRM-30351 / No List Elements Defined For List Item
Oct 30, 2011DECLARE
CURSOR GRP IS
SELECT RowNum rn, Letter_Group_ID||'-'||A_Desc AName,Letter_Group_ID
FROM Hrs_Group;
BEGIN
Clear_list('Letter_Group_ID');
FOR I IN GRP LOOP
Add_List_Element('Letter_Group_ID',I.rn,I.AName,I.Letter_Group_ID);
end loop;
END;
FRM-30351: No list elements defined for list item.
List LETTER_GROUP_ID
Forms :: Dynamic List Items
Apr 21, 2011I want to create two list items. one is for deptno and another is for empno in a single form.
Based on the selected deptno value from first list item i want to populate corresponding empno from second list item. I tried with the fallowing code, it's work fine but the second list is not clears with the existing empno's.
Code for Deptno List item
declare
cursor c is select deptno from dept;
cnt number := 1;
begin
clear_list('LI_DEPTNO');
[Code]...
Code for Empno list item in when_list_changed trigger for deptno list item
declare
cursor c is select empno from emp where deptno = :LI_DEPTNO;
cnt number := 1;
begin
it_id := Find_Item('LI_EMPNO');
clear_list(it_id);
for i in c loop
add_list_element('LI_EMPNO',cnt,i.empno,i.empno);
cnt := cnt + 1;
end loop;
end;
Forms :: How To Validate List Item
Nov 22, 2010I am working on form 6i..
I have developed a form with some text items,a list item and a image item...
list item......account_list(values....company,individual)
text_item..... company_name..
text_item.....image_path...
i have attached a pop up menu to image item... Add image and upload image...
When i click on 'Add image' the image path is getting enabled.. it is fine but when i am changing the account_list i need enable and disable the 'Company_name' text item... How can i achieve this??
I have tried it in when-validate-trigger on account_list...
if account_list=individual then
set_item_property('company_name',enabled,property_false);
else
set_item_property('company_name',enabled,property_true);
end if;
But no use of this....
how can i achieve it??
Forms :: No Data In List Item?
Mar 1, 2011I am populating the list item from predefined record group. the form is running fine but it didnt show the data present in the record group. I have placed the following code in Pre-Form trigger.
declare
list_id item;
rg_id recordgroup;
begin
rg_id := find_group('RECORD_GROUP9');
list_id := find_item('block2.list4');
clear_list(list_id);
populate_list(list_id, rg_id);
end;
Forms :: Populating A Value For List Item
May 20, 2010I created one list item.which is populating values from list item query dynamically.If i select a particular value from list it will create new record.for the new record line i want to display list item as 'complete' (i.e not exists in the list).At this time i don't want the list also.How can i assign value to the list item in this scenario?
View 9 Replies View RelatedForms :: List Item Becomes Inactive After Using Once
Dec 6, 2012i have a form having 5 listitems for making selections. once selecting through listitems i am adding this selection into below datablock by a ok button and saving it into database by a ok button. as i made one selection and press ok buttton it's working fine but after this when i want one more selection through listitems, listitems becomes inactive. it's not working after one selection. my coding on ok button is like this:
begin
select distinct lcode intolcode_ss from vac_view where locality=:vac_view.locality;
select distinct hid intohid_ss from vac_clr_vu where vr_no=:vac_view.vr_no;
:prop_temp.vr_no :=:vac_view.vr_no;
:prop_temp.qtr_type :=:vac_view.qtr_type;
:prop_temp.locality :=:vac_view.locality;
[code]....
may be it's all because of clear_list('vac_view.locality'); but i have to put this as i want to make clear all listitems after making each selections.
Forms :: List Item INDEX
May 21, 2010Is that any function or bult in there to find list item's currently selected index number.
View 4 Replies View RelatedForms :: List Item Not Working In 10g?
Jan 28, 2011I want to dynamically populate a list item such that the item list should show the name and its value should enter in the background.
I have tried by writing a query in record group, populated it. the list is showing the name in a list item which is not database item. On this List I have written a trigger which is fetching the value to another text item. It is working well but I am not convinced by this method.
for reference, i want if customer select A then list should show balanced and its value is 1when B then list should show lag,lead,advanced... values 2,3,4,.. respectively.
Forms :: Dynamic List From One Table And Insert Into Another?
Jan 10, 2013Im facing some issues with my form, getting stuck... prob desc below : I have Table A which has columns; car_year, car_type, line_num, line_text. Table B has country, car_year, car_type, line_num, data_entry_amt.
Table A contains data which gets updated once every year only. Contains what year model is the car, what type of car it is.. Line_num has numbers starting from 1 which indicates the different part number and line_text has description for that line_num. eg :
2010 Toyota 1 Windshield
2010 Toyota 2 Door
2010 Toyota 3 Tire
2010 BMW 1 Windshield
2010 BMW 2 Door
2010 BMW 3 Tire
2010 BMW 4 Rear_mirror
Table B contains specific data related to table A, Contains country where car details n prices are, car_year, car_type, line_num, and amount($) for that part. for example :
Australia 2010 Toyota 1 400.50
Australia 2010 Toyota 2 200.40
Australia 2010 Toyota 3 308.25
So in year 2010, in Australia, Toyota's Door was sold at $200.40 Now, Table A will have similar data for this year and users will enter data for table B throughout this year. I tried master-detail form for this but it doesnt work. Because every year line_num change in table A and therefore cant implement a fixed number or rows on the form for amount for table B.
How to use dynamic listing but im not familiar with it. So how i should go about doing this. My form has structure has below :
Country Car_year
___________________________________________________
table_A.line_num table_A.line_text table_B.data_entry_amt
table_A.line_num table_A.line_text table_B.data_entry_amt
table_A.line_num table_A.line_text table_B.data_entry_amt
table_A.line_num table_A.line_text table_B.data_entry_amt
When clicked on save, data on table_B.data_entry_amt on this form should go n insert into table B.
Forms :: Set_lov_property With Respect To List Item
May 21, 2013I have a multiple data block. There is a list item present on the form having three types INVOICE,BOE and MANUAL. When I select 'MANUAL' , that LOV should not appear for a particular item on the form and the user should be able to insert the value manually and validate manually. I did use set_lov_property, but did not get the correct usage.
I think set_item_property with VALIDATE_FROM_LIST property won't work as it sets the same property to whole column once it is fired. So if I write set_item_property for MANUAL it would set the the column, VALIDATE_FROM_LIST property at once when it is fired, not allowing me to the set properties for that column according to INVOICE and BOE where I would require the LOV. I want it to go with the item instance and therefore opting for set_lov_property but not clear with the syntax given
1) SET_LOV_PROPERTY
(lov_name VARCHAR2,
property NUMBER,
value NUMBER);
2) SET_LOV_PROPERTY
(lov_name VARCHAR2,
property NUMBER,
x NUMBER,
y NUMBER)
Forms :: Populating Data In List Item?
Jul 15, 2005I have created a item, CO_NAME as List Item and list style is Poplist.
I have written following code in when-new-form-instance to populate the data from table to item.
DECLARE
rg_name VARCHAR2(40) := 'COMPANY';
rg_id RecordGroup;
[Code].....
But when I run the form, Oracle Error - FRM-41337:Cannot populate the list from record group.
Forms :: List Item Populates But Not Accepting Value?
Jul 31, 2013i have a listitem, in which items populates as required but when i select any value out of these populated value, it is not displaying as selected, means i'm unable to select value from that listitem.
View 1 Replies View RelatedForms :: Scroll Bar Coming In List Item
Dec 10, 2010I have a list item with two values,0 and 1. However when i click on the list item scroll bar appears. My tester is saying for two items she doesn't need a scroll bar.
View 3 Replies View RelatedForms :: Database Block To List Item?
Oct 12, 2010I have a form which contains two canvas.In the first canvas, i have a data block which contains two columns(database item of both are no). In second canvas i have a list item.
My problem is how to pass the value(s) of this data block to the item list which is present in second canvas.
The requirement user has given is such that the user will enter different categories, and in the second canvas where the main datablock is present, will contain a list item in data block which should show the data entered by the user.
Forms :: Sorting Values In List Item
Dec 15, 2010I have two list items and from left list item values are populated to right list item through Add and Remove buttons and vice versa.My requirement is
1.) I need to sort the values of list item whenever a new element is added to the list item.
Forms :: Creating List Item With Time?
Jul 9, 2013Oracle Developer Suite 10g
I want to create List item with time .
like in pic when I click on upper side at list item increase time and other side decrease time.
Forms :: Populate Record In List Item?
Aug 6, 2010i want to popultate record in list item.... and write the follwing code...
PROCEDURE POPULATE_REC_IN_COMBO_BOX IS
RG_NAME VARCHAR2(500) :='RGGROUP';
RG_ID RECORDGROUP;
ERRCODE NUMBER;
BEGIN
[code].....
when i call this code then it returns the 2 errors:
1. FRM-41072: Cannot create Group RGGROUP.
2. FRM-41076: Error populating Group.
Forms :: List-item Selection Not Working?
Oct 3, 2012i am facing a problem in functionality of a form as there are different search parameters:
date from: text item-->mandatory
date to: text item---->mandatory
house type: list item-->optional
form_status: list item->optional
order by: list item---->optinal
untill i don't select house type by list item everything is working fine and gives desired result, even with house type if i select any house type result is fine but as i select last list item of house type which is null as i want result without house type then it gives no any data as data is present in database.
for example:
date from: 20-05-2009
date to: 21-05-2009
with these two i got the correct result, then i select
house type: 3
i got the correct result and when i change list item to any value like: 1,2,3.....it is working fine but as i want result without house type by selecting the null value in list item as:
date from: 20-05-2009
date to: 21-05-2009
it is not picking any data from database. but the same search criteria in 1st case as i described above giving result.
declare
qry varchar2(5000);
n number;
alert number;
[code]...
Forms :: List Item Background Color?
Nov 25, 2010In the attachement, i have one record. if i click on the list_item then it is showing fully blue as background colour, but i want like if i click on the list item then only current value background should show as blue rest of the values white in background colour.
View 1 Replies View RelatedForms :: Disabled List Item Will Be Enabled Accordingly Just By Clicking
Feb 4, 2013I have a problem in oracle forms. I have a block that displays five records in list item. On load, it will query two data in my table. So the list item (poplist) one and two enabled. (The default of oracle forms - List item one and two are enabled and the rest are disabled because one and two have data).
My problem was, what work around will I gonna do so that if I pressed the mouse in the third list item it will automatically enabled (for a new record) and if I pressed the list item one or two the third item will stay disable (even the fourth and fifth) because simply the user wants to update the item one or two in the list.
Forms :: List Item From Query With Refresh Button
Apr 19, 2010i want to make a list item from query..i have a form on emp
the list item is on deptno showing the department name its work fine the form are opened when the user enter the new empno they need a other department
the others users or same user are inserting the department from master form
user open the list item it will not show the inserted values until they have to reopen the form because the trigger code inserted on when new form instance but i need a refesh list when user click on list item without reopen form or any refersh button
Forms :: List Item Label Of Current Selection?
May 9, 2012How to get the label (not value) of current selection in a List Item.
View 7 Replies View RelatedForms :: Filling List Item In Detail Block
Sep 14, 2010We have a master detail form block A (master) contains an item, this item is in the record group's where-clause used to fill a list item on block B (detail block) (database item) we fille the list item in a pre-record trigger on the master block this works fine but when we navigate through the records in block a we intermittently get the following error : FRM-41337 : cannot populate the list from record group;
how should we filll our list item, in which trigger (when-new-record-instance of master block doesn't work correctly, the list item only gets filled after clicking it twice)
Forms :: Number Of Records Displayed In List Item Is More Than 1
Dec 28, 2010Actually m working on oracle 10g forms. I have a list item in which no. of records displayed is 10. I am populating this list item through a record group. I want when user select a value from first record then he should not be able to select the same value in further record of that list item.
View 12 Replies View RelatedForms :: Multiple Items Selection In A List Item?
Jan 6, 2011I have a requirement to select multiple values from a list item and do some manipulations with those values. I tried by integrating the LOV with a text item, but couldn't able to select multiple items. Is there a way to do multiple selection in a list item ?
View 1 Replies View RelatedForms :: List Item Values Showing With ALT + DOWN Key Combination
Jan 9, 2013In my forms(version 9i), list item values showing with ALT + DOWN key combination but I want to change it to only DOWN key.I search this combination in FMRWEB.RES file but there isn't any entry of ALT + DOWN.
View 1 Replies View Related
