I am facing one problem we used to copy any document and for open any document in WINDOWS
Host('CMD /C COPY '||'"'||:Old_Doc||'"'||' X:�3�3'||:New_Doc);
Client_Host('Cmd /C Start '||'X:�3�3'||:New_Doc);
But these commands not running in Linux.
tried installing oracle 10g in ubuntu. i am successful with the oracle installation.i am able to login to sqlplus using oracle OEM,but when i try to login through command prompt , i get the following error:
rakesh@ubuntu:/$ sqlplus "/ as sysdba"
bash: sqlplus: command not found
[color="#000000"][/color]
rakesh@ubuntu:/$ sqlplus
bash: sqlplus: command not found
i have also tried to set the oracle_home, oracle path & oracle SID.
find the below configuration parameters which i have set to.
root@ubuntu:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin# more oracle_env.sh
ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
export ORACLE_HOME
ORACLE_SID=XE
export ORACLE_SID
#NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh`
[code]....
i was trying to use the host command to run the commands from linux. however, it doesnt work.
PROCEDURE compile_procedure IS
c_success boolean;
c_bare_filename varchar2(50);
command_string varchar2(1000) ;
BEGIN
c_bare_filename := substr(:B_DEV.B_DEV_ITEM_FILENAME,instr(:B_DEV.B_DEV_ITEM_FILENAME,'',-1)+1);
[code]....
I am using the HOST command within Oracle Forms 10g on Windows server to copy a pdf file from the application server to a network folder on another Windows server.
The command works fine if I logon to Windows app server and type it. But it doesn't work when it is launched within Oracle forms using HOST. The command looks as follow
net use \\FileServer\e-file /user:usergroup\username password & copy D:\RepTmp\myReport.pdf \\FileServer\e-file\test\myReport.pdf
Oracle forms doesn't give any error message at all but the pdf file never gets there. Even when I map the network folder as "R:" drive on the Windows app server, a simple copy command like this does not work with HOST:
copy D:\RepTmp\myReport.pdf r:\test\myReport.pdf
Oracle Forms server is running as "SYSTEM" on the Windows server. If HOST won't work, is there any other way to copy the file other than using fpt?
i am trying to copy the data from a remote database which has Oracle 8i thru Sqlplus copy command to the local database which has Oracle 11gR2.
copy from abc/abc@remote
insert emp_new
using
select *
from emp_old
where rownum < 1001;
is it possible to copy the remote database thru sqlplus copy command ?
I got to pull 30M data into local DB from a remote DB. As of now we have procedure to perform this task using an
Insert /*+append*/ table1
select *
from rdb_view;
I observed using the copy command in sql plus has taken very less time than the procedure.Can we use the Copy command inside the PL/SQL block? I tried with dynamic SQL but It is not allowed I guess.
Which command is the right way to open a alert log file of below size.
-rw-r----- 1 oracle asmadmin 28070129 Dec 17 08:06 alert_DEMO.log
I used to open a alert log file using vi editor. Is that a right way to open and view a alert log ?
When i try to copy a table within the database i get insufficient priv error.
SQL> COPY FROM JACK@JACK -
> CREATE T -
> USING SELECT * FROM JACK.T;
Enter FROM password:
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
ERROR:
ORA-01031: insufficient privileges
what privilege is required to perform this copy command ?
I'm trying to get Oracle 11.2.0.2.0 XE working on Ubuntu 13.04. For some reason I keep getting the error:
"ORA-00845: MEMORY_TARGET not supported on this system".
I have checked several forums for an answer. All problems had something to do with a tmpfs that is too small. I have tried mounting tmpfs of 8G without any luck. I tried both tmpfs and shmfs.
Here's my configuration atm:
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 110G 6.4G 98G 7% /
none 4.0K 0 4.0K 0% /sys/fs/cgroup
udev 7.8G 4.0K 7.8G 1% /dev
tmpfs 1.6G 904K 1.6G 1% /run
none 5.0M 0 5.0M 0% /run/lock
none 6.0G 36K 6.0G 1% /run/shm
none 100M 28K 100M 1% /run/user
/dev/sda1 180M 45M 126M 27% /boot
/dev/sdb1 688G 2.5G 651G 1% /home
/home/ydbondt/.Private 688G 2.5G 651G 1% /home/ydbondt
shmfs 6.0G 36K 6.0G 1% /run/shm
Kernel info:
Linux DELL-YOURI 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
I also have found another error in clsc.log:
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
[ CLSE][1032939328]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr.loc file. No such file or directory]
I am using the SQL*PLUS COPY command to move the data from my database to another remote database. The data in my database also contains DATETIME format. But since COPY command cannot handle DATETIME format, I am wondering is there any workaround for this.
Note: Due to some limitations, I cannot use other methods like DATABASE LINK or EXPDP/IMPDP commands.
I am trying to run PL/SQL Developer from command line, So it can open with an opened SQL WINDOW by default, with a script (which I specify in the command ) already in it:
I've tried:
"C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb
but it just opens the application with a connection, no file.
*CORRECTION* While I was writing this post, I tried something , which is not so sophisticated, and it appeared to work...
C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb "C:Program Files (x86)PLSQL Developerandrey.sql"
I have had the following problem open with Oracle support since March 2011 (8 months), and still no resolution.
When I export all our schema's on Sunday night it takes about 1 hour 50 minutes. When I export the same schema's on any other night it takes 7 hours. The only difference is that on Sunday at 4:00am we drop all connections in the connection pools and reestablish new connections. Then 19hours later on Sunday at 23:00 we perform the exports which only take 2 hours to complete.
I have also tried recreating the connections in the connection pools during the week, and the exports have then only taken 2 hours to complete. But the following night after the connections have been used during the day, the exports again take 7 hours. So it appears the export speed gets significantly slower when there are many open connections that have been used and not closed.
From the stats pack report I found 2 SQL statements internal to the export command, that had an order of magnitude in difference when looking at the elapsed execution time between the fast export, and the slow export (see below).
How to speed up the exports without having to drop and recreate the database connections in the connection pools each night.
FAST:
elapsed_time: 430.90
executions: 161,388
Module: exp@Oracle1 (TNS V1-V3)
SELECT COLNAME, COLNO, PROPERTY, NOLOG FROM SYS.EXU10CCL
WHERE CNO = :1 ORDER BY COLNO
elapsed_time: 264.29
executions: 50,349
Module: exp@Oracle1 (TNS V1-V3)
SELECT TOWNER, TNAME, NAME, LENGTH, PRECISION, SCALE, TYPE, ISNULL, CONNAME, COLID, INTCOLID, SEGCOLID, COMMENT$, DEFAULT$, DFLTLEN, ENABLED, DEFER, FLAGS, COLPROP, ADTNAME, ADTOWNER, CHARSETID, CHARSETFORM, FSPRECISION, LFPRECISION, CHARLEN, TFLAGS, 100 FROM SYS.EXU8COL
WHERE TOBJID = :1 ORDER BY INTCOLID
SLOW:
elapse_time: 8264.16
executions: 124,662
Module: exp@Oracle1 (TNS V1-V3)
SELECT COLNAME, COLNO, PROPERTY, NOLOG FROM SYS.EXU10CCL
WHERE CNO = :1 ORDER BY COLNO
elapsed_time: 3877.78
executions: 38,813
Module: exp@Oracle1 (TNS V1-V3)
SELECT TOWNER, TNAME, NAME, LENGTH, PRECISION, SCALE, TYPE, ISNULL, CONNAME, COLID, INTCOLID, SEGCOLID, COMMENT$, DEFAULT$, DFLTLEN, ENABLED, DEFER, FLAGS, COLPROP, ADTNAME, ADTOWNER, CHARSETID, CHARSETFORM, FSPRECISION, LFPRECISION, CHARLEN, TFLAGS, 100 FROM SYS.EXU8COL
WHERE TOBJID = :1 ORDER BY INTCOLID
I use the following export command for each schema:
$ORACLE_HOME/bin/exp user/pass file=somefile.dmp owner=$SCHEMA log=somelog.log buffer=9000000
I have an Oracle Standard edition 11.1.0.7 database on 64bit Linux with a 7GB SGA. I currently export (I use exp not datapump because datapump is a lot slower and we can't use parallel processing features of datapump on a standard edition database) approx 200 schema's each night. The export normally takes 1 hour 50 minutes which is approximately 2 schema's exported every minute. When the exports run slowly each export takes almost 2 minutes to complete.
The database has about 20 GB data and 50 GB indexes. The database has also approx 500 connections via toplink connection pools from 8 application servers.
Provide the installing steps of oracle 12c in ubuntu.
View 3 Replies View RelatedI am trying to install oracle 11gr1 to my ubuntu 12.10 and when i run ./runInstaller.sh
It said that OS Kernel Parameter: ip_local_port_range failed and the installer create a script to fix it but every time i run the script on terminal, it gives me
'The upper limit of ip_local_port range in response file is not greater than value in /etc/sysctl.conf, hence not changing it.
net.ipv4.ip_local_port_range = 9000 65535
I am installing oracle 11g under ubuntu 12.10(32bits) and getting an error 'all_no_orcl' 'ins.rdbms.mk'. It occurs when it tries to invoke the file.my laptop is 32 bits, 30.7 hd, 1.5 GB ram, 2MB cahe. The OS is installed on an external drive.
View 4 Replies View RelatedHow to open a URL from oracle forms ?
Select APP_SERVER_URL into p_url
from CA_EXT_INT_PARAM
where FACILITY_ID =facility_id;
SELECT appl_user_password INTO p_user_password
FROM sm_appl_user
WHERE appl_user_id = P_Login_User;
[code]...
Above coding throws a error unable to open a link..
I want to copy image/pdf/doc file from one folder to another folder. For that I use following code but its not working.
DECLARE
v_path VARCHAR2 := 'C:ESMIMAGE';
BEGIN
HOST ('COPY '||v_path||'admin.jpg '||v_path||'BE2013', NO_SCREEN);
END;
I want to copy admin image from 'C:ESMIMAGE' to 'C:ESMIMAGEBE2013'.
I have configured and tested the webutil in Windows Operating System and worked perfect, Now i am trying to deploy customized form to EBS R12 that using webutil, and after making same configuration which has done before, i got compilation error.
Form is very simple(Just button with following pl/sql code)
show_webutil_information (TRUE);
Erro is: "FRM-40039: Cannot attach library WEBUTIL while opening form XXR12_DEMO.fmb"
webutil configuration steps on R12 or the error solution,
I am installed the Oracle database following the this link .
1.Downloaded 11g express edition
2.Created a new user 'oracle' under the group dba. Following steps are executed using this.
3.unzip oracle-xe-11.2.0-1.0.x86_64.rpm.zip and then Converted the rpm to the Ubuntu package
sudo alien --scripts -d oracle-xe-11.2.0-1.0.x86_64.rpm
4.Created /sbin/chkconfig file and added the entries as specified here
5.Created /etc/sysctl.d/60-oracle.conf and added the entries as specified in same link as above.
6.Below steps:
ln -s /usr/bin/awk /bin/awk
mkdir /var/lock/subsys
touch /var/lock/subsys/listener
7.sudo dpkg --install oracle-xe_11.2.0-2_amd64.deb (.deb generated in step 3)
8.sudo /etc/init.d/oracle-xe configure (left the default values as it is)
9.Set the following env variables in ~/.bashrc file
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export ORACLE_SID=XE
export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh`
export ORACLE_BASE=/u01/app/oracle
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export PATH=$ORACLE_HOME/bin:$PATH
[code]....
Now when exectute any SQL statements on SQLplus, i end up with the following error
SQL> select * from dual;
select * from dual
*
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
I have increased the swap memory as specified in here
free -m
total used free shared buffers cached
Mem: 3901 3428 473 0 182 1988
-/+ buffers/cache: 1258 2643
Swap: 5066 0 5066
Most of the ones I'm seeing online relate to the database, not the client. I have linux.x64_11gR2_client.zip and and trying to do runInstaller and I get up to perform prerequisite tests and it tells me that I am missing packages and that kernel parameters are wrong. I've tried to run the runfixup.sh file and get a lot of this:
./orarun.sh: 186: [: true: unexpected operator./orarun.sh: 848: [: unexpected operator./orarun.sh: 864: [: unexpected operator./orarun.sh: 882: [: unexpected operator./orarun.sh: 903: [: unexpected operator./orarun.sh: 1052: [: unexpected operator./orarun.sh: 1057: [: unexpected operator./orarun.sh: 1075: [: unexpected operator./orarun.sh: 1085: [: unexpected operator./orarun.sh: 1115: [: unexpected operator./orarun.sh: 1143: [: unexpected operator./orarun.sh: 1189: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 1228: [: unexpected operator./orarun.sh: 1284: [: unexpected operator./orarun.sh: 1342: [: unexpected operator./orarun.sh: 1426: [: unexpected operator./orarun.sh: 1451: [: unexpected operator And many of the supposedly missing packages actually are installed. IE: make. I have make 3.81 installed but the installer insists upon make 3.80.
i am trying to open a .pdf file in oracle forms 10g which had stored in oracle 9i.10g database.
so which method shall i use to do this?
how can i open the .fmx file in oracle 10g?
View 12 Replies View RelatedWe are planning to migrate the forms application from windows to linux.
View 1 Replies View RelatedMigration of oracle forms 10g 32 bit windows platform to 11g 64bit Linux platform . I have about 500 fmb on my 10g environment which are currently working fine but when i go to compile it on 11g an error file is generated. All my path is set in proper manner .
I have a object library which has multiple tabs and every tab has its own object. While compiling, the forms are not inheriting the object values only few values from the object are considered.
i want to open dialog window using oracle forms 10g on button click event.
View 3 Replies View RelatedI would like to open a word document /excel sheet /pdf from oracle forms.
View 20 Replies View Relateddoes the path of office on the server or on the client PC?
View 1 Replies View Relatedwe are running SAP application against oracle database. say, if I use brspace or brtools (from SAP side) to shutdown or startup database or collect stats, does this mean it not recommend to use oracle command to shutdown/start & collect stats?
View 3 Replies View RelatedI have installer oracle 11i database, with oracle 10g forms for development.When I am trying to open test form in oracle 10g form only Internet explorer is opening with blank screen, while it is connected to oracle database (version 11i).
Oracle 11i is on windows 2003 ent server and Oracle 10g is on windows 2000 professional...
I have u na forms developer application in 6.0 that generates a Word document. This application runs successfully on Windows XP operating system. We now have PC's new operating system Windows 7 and officce 2010. My procedure reads a specific route where a template in Word which is used to generate the document. In the user's PC application that does not generate the document even shows me an error message. But when I enter my network user with the user's PC and the document genre generates me perfectly. I checked if the user has access to the server path specifies where the template encuntra wish to open and if you have them.
View 1 Replies View Related