I have been starting to use OEM 10g and am configuring backups through the maintenance portion. Is there a way to get backup success / failure notification sent to an email address?
I am configuring the Backup Settings through EM. It says 'An error has occurred while configuring the backup settings.'. When i click on 'View Error Details' it shows:
'open2: IO::Pipe: Can't spawn-NOWAIT: No such file or directory at - line 831'
I cant figure out the problem.. I have also created the Disk Backup Location.
I'm having a problem with performing backups from EM DB Control on two of my Oracle 10g 10.2.0.4 systems. When I configure and submit any backup job from EM (either online or offline), the following happens:
- When the job is due to run a Pre backup task has status of 'Scheduled'
- Prebackup task completes and status changes to 'Succeeded'
- Backup task appears with status of 'Scheduled' and value of started time within the next minute
- Status of backup task never changes from 'Scheduled', and the started time keeps updating to the current time
- This goes on indefinitely until I abort the job
At the moment I have scheduled tasks configured to run an RMAN job every night, but I need to get this working through Enterprise Manager Database control.
Something else which has happended on one of these systems is that after applying some Microsoft Critical updates the database control service would not start. The only way I could find to resolve this was to recreate the Enterprise Manager repository. Could there be a link here at all?
I've also posted this here: [URL] but with no response so far.
I have an Oracle 10g Database and Database Control Enterprise Manager is also installed and started. When I log in to EM, go to Maintenance, I cannot see the link "Backup Reports" under the "Backup/Recovery" section. In fact, the only links I get are "Schedule Backup" and "Perform Recovery". I dropped the EM Repository and created it again but still same problem.
I am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
i have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
My problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
we have 5 database servers in different locations,
1.main database 10g(production) ip-192.1.1.1 2.standby for production 10g ip- 192.1.1.2
both are linux
3.another database 10g windows 4. another database 9i windows
both are in same location
5.new database 10g in linux ip-192.1.1.3 some other location i m having a system windows xp installed i m monitoring, all 10g by oracle enterpric manager linux os monitor by Putty software
and i m monitoring below 10g database by sqlplus. now how could i monitor all the database by oracle enterprise manager grid control installed in my system that windows OS installed.
i have change my database name successful but after that when i open my enterprise manager i can open it but i cannot do anything in enterprise manager . i cannot show any tabs there.. i have attached my this enterprise manager login page here
I want to take backup of selected data from tables of a schema (as huge data, that is not used, causing slow query performance) I planned to create a seprate backup schema and tablespace to store the data from these tables. Then write procedures that can move the data to and fro among table of those schema. And create partitioned index on those backup tables.
I am trying following way but giving me same date 11 june
SELECT dt from ( select CASE when to_char(To_Date(To_Char('20100613'),'YYYYMMDD'),'fmDy') in ('Sat','Sun') then next_day(To_Date(To_Char('20100613'),'YYYYMMDD')-7,'Friday') else To_Date(To_Char('20100613'),'YYYYMMDD')end as dt
I'm trying to install OMS on AIX and one of the prerequisites is JDK 1.6.0 SR6 but I couldn't find it in the IBM site, can some one tell me where can I download JDK 1.6.0 SR6?
I am trying to start enterprise manager without success. i used to work after installation of db 10g but do day when i run the command below it fails. also i donot see any thing useful in the logs that am being directed to directory /oracle/Ora10R2/Orahome/localhost.localdomain_dse/sysman/log
I have two databases on the same oracle 11g install. The first (ORCL) database uses the default port for EM (1158). However, I don't know what the second one uses. I go to the portlist.ini file, but it only has the entry for the default (ORCL) database.
When i run EM ,in my explorer show these SID = ORCL
instance is open agent is up but ...listener is down .my listener is active and run.... however i can connect to DataBase and execute DDL or DML transactions.How i could resolve it ?
I have install oracle 11g database enterprise edition But i cannot find the Oracle Enterprise Manager after the installation. i want the gui based Oracle Enterprise Manager i have access the the web base Oracle Enterprise Manager but not the gui based.how to use and download the GUI Based Oracle Enterprise Manager ....
when i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
when I run the form and do some action intheform (call procedure , etc..) how can to see what is the process in running in OEM? Do it have any way to monitor it?
I am trying to install OEM but the GUI asks for weblogic server home.i checked many documents in net but none has weblogic installation procedure. Is it the sequence of installation ?
am trying to create a backup job in my UAT/testing instance, but with little success. I'm trying to create a backup job to disk (backup is to be stored in a drive local to the DB server) and it seems simple enough, but I keep getting the following error:
The job submission has failed for the following reason
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at "SYSMAN.DECRYPT", line 5 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 408 ORA-06512: at SYSMAN.MGMT_CREDENTIAL", line 1007 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1400 ORA-06512: at SYSMAN.MGMT_JOBS", line 295 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
In "Recovery Settings", I have a "Flash Recovery Area Location" defined (path local to the DB -i.e. the server that the DB resides on), a "Flash Recovery Area Size" of 4 defined, and a Flashback Retention Time of 24 hours defined. Everything else is riding default values.
In "Backup Settings", there's nothing defined. Everything here is riding default values. As I understand it, not specifying a Disk Backup Location is fine so long as the Flash Recovery Area is defined. All the local services are turned on (scheduling, etc.).
If it's relevant, I mirrored the recovery/backup settings in UAT to the same as PROD, but changed what I needed to in order to accommodate the UAT environment (e.g. paths, etc.)
I want to manage my database remotely, through Internet. Is it possible to do that with OEM? Where can I find information related to this? Is there another monitoring software that allows me to perform this?
enctl is started but its status shows that EM Daemon is not running.What does it mean?And how can i reolve this error.
oracle@srv603484:~> emctl start dbconsole TZ set to US/Pacific Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
I suddenly started getting this error message "Error
java.lang.Exception: IOException in sending Request :: Connection refused: connect ". on the dbconsole of my database. Any clue where to proceed or how to find whats causing this error.
i am learning oracle technologies,i downloaded and installed 11g and log in as sys as sysdba in enterprise manager,in em certain tasks ask for password again, for example in main page when you want to edit the listener it asks for password, the problem is what kind a password does it want?, i tried os password and sys or system password but it did not work, it also happens when you try to shutdown the database,it asks for os and below it asks for another password,