I have an Oracle 10g Database and Database Control Enterprise Manager is also installed and started. When I log in to EM, go to Maintenance, I cannot see the link "Backup Reports" under the "Backup/Recovery" section. In fact, the only links I get are "Schedule Backup" and "Perform Recovery". I dropped the EM Repository and created it again but still same problem.
View 1 RepliesWhile running "Prompt>Emctl resetTZ agent"
it gives error message: jvm.dll missing....
I am using oracle 11g on OEL 5.8. Facing problem in database control, when i browse using database control it shows me missing plugin. I have install jre 6 but no luck.
View 1 Replies View RelatedI have been starting to use OEM 10g and am configuring backups through the maintenance portion. Is there a way to get backup success / failure notification sent to an email address?
View 8 Replies View RelatedWhat privileges do a DB user need to run an ASH report? The user logs into OEM and then as a different user into the DB (I can run the ASH, but Im logged in as SYSTEM).
The user is getting ORA-00904: invalid identifier.
I am configuring the Backup Settings through EM. It says 'An error has occurred while configuring the backup settings.'. When i click on 'View Error Details' it shows:
'open2: IO::Pipe: Can't spawn-NOWAIT: No such file or directory at - line 831'
I cant figure out the problem.. I have also created the Disk Backup Location.
I'm having a problem with performing backups from EM DB Control on two of my Oracle 10g 10.2.0.4 systems. When I configure and submit any backup job from EM (either online or offline), the following happens:
- When the job is due to run a Pre backup task has status of 'Scheduled'
- Prebackup task completes and status changes to 'Succeeded'
- Backup task appears with status of 'Scheduled' and value of started time within the next minute
- Status of backup task never changes from 'Scheduled', and the started time keeps updating to the current time
- This goes on indefinitely until I abort the job
At the moment I have scheduled tasks configured to run an RMAN job every night, but I need to get this working through Enterprise Manager Database control.
Something else which has happended on one of these systems is that after applying some Microsoft Critical updates the database control service would not start. The only way I could find to resolve this was to recreate the Enterprise Manager repository. Could there be a link here at all?
I've also posted this here: [URL] but with no response so far.
when i want to do backup in oracle management server for my database (repository)that i created give me an error message
<< using perferred credentials , the following error occurred: ORA-01031 :insufficent privileges>>
I am getting this error when i am working with backup manager. This error is prompted after i finish the backup setup.
Quote:VOJ-00508: The 'Selected Destinations' field must be supplied.
I am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
View 1 Replies View Relatedi have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
Don't know what is wrong
How to start EM on windows 7?
View 3 Replies View RelatedMy problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
Not a zip file(End header not found)
we have 5 database servers in different locations,
1.main database 10g(production) ip-192.1.1.1
2.standby for production 10g ip- 192.1.1.2
both are linux
3.another database 10g windows
4. another database 9i windows
both are in same location
5.new database 10g in linux ip-192.1.1.3
some other location
i m having a system windows xp installed
i m monitoring, all 10g by oracle enterpric manager
linux os monitor by Putty software
and i m monitoring below 10g database by sqlplus. now how could i monitor all the database by oracle enterprise manager grid control installed in my system that windows OS installed.
i have change my database name successful but after that when i open my enterprise manager i can open it but i cannot do anything in enterprise manager . i cannot show any tabs there.. i have attached my this enterprise manager login page here
View 12 Replies View RelatedMy user would like to have a way to attach files to database records. For simplicity, we'll say that each employee in the database could have 0-many file attachments associated with them. I know how to make this part work using Oracle Forms.
So that's the easy part for me. The tough part is that they want to be able to run an Oracle Report on our application server (displays as a PDF, also downloadable as a PDF) and have links on this report to the attachments that they uploaded using the forms process above.
For the idea of storing the files on a folder somewhere, I simply created a text object on the report that had it's hyperlink property pointing to the file location. Done.. opens fine.
However, I want to be able to have the option of storing these files in the database instead, just in case we can't go with the shared folder idea. I'm not sure how to make this work. I can store a blob in the database.. but how do I link to that blob on the report for them to be able to download it? Is this even possible?
how to create a download link on the Oracle Report that let's them download a file out of the database.
DB:11.2.0.2.0
Oracle Apps:12.1.3
O/S:AIX 6.1 64 bits
RMAN backup throws the error:
RMAN-06169: could not read file header for datafile 40 error reason 1
RMAN-06169: could not read file header for datafile 41 error reason 1
RMAN-06169: could not read file header for datafile 40 error reason 1
released channel: oem_disk_backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 06/14/2012 07:54:43
[code]...
Could we skip the backup of the above missing files using RMAN -> backup database skip inaccessible;On further research, this would compromise tablespace SYSAUX recoverability...Questions:
1) What caused the above missing files to get created?
2) What is recommended: Recover the datafiles?
Version Details:
O.S Version HP-UX B.11.31 U ia64
Oracle DB Version 11.2.0.3.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Scenario :
Using RMAN Active cloning to duplicate a RAC database from Production to Development environment.
Problem:
At the end of the cloning the below errors are reported;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
How to prevent the error of RMAN-06054: media recovery requesting unknown archived log for thread with sequence and starting SCN of while performing the RMAN Active Cloning? I do NOT want to use UNTIL clause.
I'm trying to install OMS on AIX and one of the prerequisites is JDK 1.6.0 SR6 but I couldn't find it in the IBM site, can some one tell me where can I download JDK 1.6.0 SR6?
View -1 Replies View RelatedI am trying to start enterprise manager without success. i used to work after installation of db 10g but do day when i run the command below it fails. also i donot see any thing useful in the logs that am being directed to directory /oracle/Ora10R2/Orahome/localhost.localdomain_dse/sysman/log
[oracle@cdsdb ~]$ emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
Starting Oracle Enterprise Manager 10g Database Control .....
[code]....
I have two databases on the same oracle 11g install. The first (ORCL) database uses the default port for EM (1158). However, I don't know what the second one uses. I go to the portlist.ini file, but it only has the entry for the default (ORCL) database.
View 3 Replies View RelatedI tried to start my oem managing but got the following error.
[oracle@Eagle2 ~]$ emctl start dbconsole
OC4J Configuration issue. /home/oracle/app/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_Eagle_boomiedb not found.
How can I use OEM remotely?
my DB server is on 172.17.1.4 IBM-AIX
and my computer is 172.17.1.53
Because I am tired of using sqlplus :@
When i run EM ,in my explorer show these
SID = ORCL
instance is open agent is up but ...listener is down .my listener is active and run.... however i can connect to DataBase and execute DDL or DML transactions.How i could resolve it ?
I have install oracle 11g database enterprise edition But i cannot find the Oracle Enterprise Manager after the installation. i want the gui based Oracle Enterprise Manager i have access the the web base Oracle Enterprise Manager but not the gui based.how to use and download the GUI Based Oracle Enterprise Manager ....
View 1 Replies View Relatedwhen i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
So I try lsnrctl start and i get:
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:26:25
Copyright © 1991, 2010, Oracle. All rights reserved.
TNS-01106: Il listener con nome LISTENER � stato gi� avviato
So I try lsnrctl status and i get:
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:23:34
Copyright © 1991, 2010, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
[code]...
The file "server.xml" in E:\app\Andrea.Rimoldi\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\ does not exist...
Is there any way to retrieve or recover this file?
when I run the form and do some action intheform (call procedure , etc..) how can to see what is the process in running in OEM? Do it have any way to monitor it?
View 1 Replies View RelatedI am trying to install OEM but the GUI asks for weblogic server home.i checked many documents in net but none has weblogic installation procedure. Is it the sequence of installation ?
View 2 Replies View Relatedam trying to create a backup job in my UAT/testing instance, but with little success. I'm trying to create a backup job to disk (backup is to be stored in a drive local to the DB server) and it seems simple enough, but I keep getting the following error:
The job submission has failed for the following reason
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at "SYSMAN.DECRYPT", line 5 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 408 ORA-06512: at SYSMAN.MGMT_CREDENTIAL", line 1007 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1400 ORA-06512: at SYSMAN.MGMT_JOBS", line 295 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
In "Recovery Settings", I have a "Flash Recovery Area Location" defined (path local to the DB -i.e. the server that the DB resides on), a "Flash Recovery Area Size" of 4 defined, and a Flashback Retention Time of 24 hours defined. Everything else is riding default values.
In "Backup Settings", there's nothing defined. Everything here is riding default values. As I understand it, not specifying a Disk Backup Location is fine so long as the Flash Recovery Area is defined. All the local services are turned on (scheduling, etc.).
If it's relevant, I mirrored the recovery/backup settings in UAT to the same as PROD, but changed what I needed to in order to accommodate the UAT environment (e.g. paths, etc.)