i have a problem with Cursor in trigger,
CODEcreate or replace trigger admin
after insert on admin
for each row
declare
bang varchar2(250):='ADMIN';
[code]...
i will try with select :new.i.column_name from dual, but not run (because i can't determination exactly column name thus i must use column_name variable)
why this code work in 8i but not in 9i, 10g, 11g
declare
type typ_curseur is ref cursor;
l_cursor typ_curseur;
[Code]....
When running in 9,10 or 11 I get the error ORA-22806: not an object or REF. After investigation I found that the problem is the bind variable ":bind.variable". Notice the dot between bind and variable. If i remove the dot or replace it by underscore everything work fine.
I am just looking for some documentation about this problem to know if it was some new restriction starting in 9i and if there is something to set to make it work like in 8i or maybe it will be better to change all our program that are using this kind of syntax. Actually i did not find anything on metalink.
I'm trying to Create a procedure that generates:
Customer
Description of Order
Amount of Order
Total Of Order
As this Generates More than One Row I thought i would need to use cursor in order to store the results and then use them from the object So this is what i Coded:
CREATE OR REPLACE PROCEDURE UP_CustOrders
AS
/*I Am Selecting A Cursor Cause It Return More Than One Row*/
CURSOR ReportCursor IS
SELECT Company
[code]..
It appears It creates the procedure but im not sure why it has compilation errors Perhaps im missing some symbols? Here are the tables:
CREATE TABLE Customers
(CustNum NUMBER(10) NOT NULL,
Company VARCHAR2(20) NOT NULL,
CustRep NUMBER(10),
[code]...
I have a trigger to automate grants to a Role whenever a table is created in my schema.I have dba rights.
CREATE OR REPLACE PROCEDURE deepa.myddl
(p_ddl IN VARCHAR2) IS
BEGIN
EXECUTE IMMEDIATE p_ddl;
[Code].....
This works perfectly when i create a table as deepa user. But say when another User creates a table in my schema
like create table deepa.test1 ( a number) This trigger is not fired. Whenever a table is created by me or by any other user in my Schema, i need the trigger to be fired.
I have created a Table and a log of materialized view in an Schema SchemaAA of Server A
CREATE TABLE TABLA_TEST
(
TEST_PK NUMBER,
TEST_TEXTO VARCHAR2(50),
CONSTRAINT PK_TEST PRIMARY KEY (TEST_PK)
);
CREATE MATERIALIZED VIEW LOG ON TABLA_TEST;
I have created a DB Link from server B with user REPLIC
I have granted SELECT to REPLIC to the table and the log materialized View.
I have created a table in instanceBA of Server B
CREATE TABLA_TEST
(
HOSPCODE NUMBER(3),
TEST_PK NUMBER,
TEST_TEXTO VARCHAR2(50),
FECHA_INSERT DATE,
FECHA_UPDATE DATE,
FECHA_DELETE DATE,
CONSTRAINT TTEST_PK PRIMARY KEY (HOSPCODE, TEST_PK);
I have created a materialized view in schema SchemaBB of Server B with a trigger
CREATE MATERIALIZED VIEW WORKAREA.TABLA_TEST70
BUILD IMMEDIATE
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
SELECT TEST_PK,
TEST_TEXTO
[code].........
All schemas have the appropriate grants.
When inserting in TABLA_TEST (SchemaAA) and refreshing MView TABLA_TEST70 things go nicely.
But, when updating a record in the original TABLA_TEST and refreshing the MView the results in TABLA_TEST in SchemaBA are as if I have deleted the record (FECHA_DELETE is set to SYSDATE).
Step1
CREATE TABLE test
(id NUMBER PRIMARY KEY,
name VARCHAR2(30));
Step2
CREATE SEQUENCE test_sequence
START WITH 1
INCREMENT BY 1;
Method1 Follow Step1 and Step2 and create a Trigger as below :
CREATE OR REPLACE TRIGGER test_trigger
BEFORE INSERT
ON test
REFERENCING NEW AS NEW
FOR EACH ROW
BEGIN
SELECT test_sequence.nextval INTO :NEW.ID FROM dual;
END;
/
Method 2 Follow Step1 and Step2 and directly have an insert statement as below:
INSERT INTO test (id, name) VALUES (test_sequence.nextval , 'Jon343');
Method 1, the Trigger is not getting created, however by following Method 2, I am able to generate auto-increment number.
I am trying to write a trigger on a new table. (dest_test) This is the first trigger that I have ever attempted (fairly new DBA) and I am having some trouble with the trigger body.It is a before insert trigger that will need to select from another table (dest) for a particular value being inserted (destination).
create table dest_test (
destination varchar2(4) not null,
db_name varchar2(10) not null
)
desc dest
[code]...
I am getting the exact opposite results than I want, though. If the value appears in dest, it is inserting into dest_test... NOT whatI want it to do!If the value doesn't appear in dest, it is throwing ora-6512 and ora-4088 errors. Is there a way to suppress these errors, or to graceful exit from the block so that the trigger completes without throwing these errors?
I create a master detail form. I created also a post quey trigger, inside I wrote the code below.A cursor looks to another table and returns to the form some values i need!
declare
cursor C1 is
select apofaa, startdate, enddate, transport
from trapofdet
where trapofdet.apofcode = :trapof.apofcode;
[code]....
How to solve the
a. frm-40737, illegal restricted procedure go block in post-query trigger
b. It seems tha returns all the records but it appears only the last one.
I getting a error Ora-06511 when-new-item-instance trigger raised unhandled exception.
below is the coding for the trigger when-new-item-instance : where the cursor is open? how to close it?
if :blk_master.action_status = 'A' then
declare
doc_slno number;
[Code].....
Below is the sample code working fine in 10g and not working now in 11g.
CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED "PSTest" AS
import java.sql.SQLData;
import java.sql.SQLException;
import java.sql.SQLInput;
import java.sql.SQLOutput;
import java.util.List;
[code]....
we got the below error: ORA-00932: inconsistent datatypes: expected an IN argument at position 1 that is an instance of an Oracle type convertible to an instance of a user defined Java class got an Oracle type that could not be converted to a java class
Current Oracle version is Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit and the version we are upgrading is Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit
I have two tables : oa_membership_dtl(in this created_by field is varchar2(200 byte) ,oa_partner_usr_dtl(in this table partner_userid is number(8,0) i need to do join on above fields.
I am using following two queries:
select * from oa_membership_dtl membership
join oa_partner_usr_dtl partner_user
on to_char(partner_user.partner_userid,'9999')=membership.created_by
select * from oa_membership_dtl membership
join oa_partner_usr_dtl partner_user
on rtrim(ltrim(partner_user.partner_userid||' '))=rtrim(ltrim(membership.created_by))
by using first data is not fetched but 2nd is working fine , i am getting the matched records using 2nd query.
whats the diff between to_char and || symbol?
I'm dealing with an ORA-1000 error in a Pro*C application where all the cursors are correctly closed (or so it seems to me).
Here is the code for a simple program which reproduces the problem:
Each cursor is opened in a PL/SQL package:
CREATE OR REPLACE PACKAGE emp_demo_pkg AS
TYPE emp_cur_type IS REF CURSOR;
PROCEDURE open_cur(curs IN OUT emp_cur_type, dept_num IN NUMBER);
END emp_demo_pkg;
[Code]....
While testing the initialization parameter open_cursors is set to 50.
It's my understanding that Oracle doesn't close the cursors until it needs the space for another cursor, which in my test case seems to happen when I enter a value of 50 or bigger for "number of loops". To see how oracle is reusing the cursors, while the test program is running I run SQL*Plus and query v$sesstat for the session that's running the test with the following sentence:
select name, value
from v$sesstat s, v$statname n
where s.statistic# = n.statistic#
and sid = 7
and name like '%cursor%';
Even before I enter a value for number of loops I can see that the session opened 4 cursors and closed 2 of them:
NAME VALUE
---------------------------------------------------------------- ----------
opened cursors cumulative 4
opened cursors current 2
Entering a value of 5 for number of loops yields
NAME VALUE
---------------------------------------------------------------- ----------
opened cursors cumulative 11 <----- 7+
opened cursors current 8 <----- 6+
With a value of 30
NAME VALUE
---------------------------------------------------------------- ----------
opened cursors cumulative 36 <----- 25+ (apparently, Oracle reused at least 5 cursors)
opened cursors current 33 <----- 25+
With a value of 47
NAME VALUE
---------------------------------------------------------------- ----------
opened cursors cumulative 53 <----- 17+
opened cursors current 50 <----- 17+
Now I reached the upper limit set by the initialization parameter open_cursors.
Entering a value of 48, I get the ORA-1000 error.
ORA-01000: maximum open cursors exceeded
ORA-06512: at "SCOTT.EMP_DEMO
Since I open and close the cursor in the same loop iteration, I expect to find in every iterarion 1 explicit cursor and a number of implicit cursors (the PL/SQL call along with the so-called recursive cursors), but I don't expect the sum of all of them to be greater than 50. If my understanding is correct Oracle should be reusing the 50 cursors previously marked as "closeable", not raising the ORA-1000 error.
Is it possible to:
-define a cursor with bind variables
-get a cursor record from these cursor
-and pass the bind variable in the OPEN clause
Did'nt succeed as shown in the example.
SET SERVEROUTPUT ON SIZE 900000;
DECLARE
--works fine
CURSOR c1 IS SELECT * FROM USER_TABLES WHERE rownum<3;
--doesn't work
--CURSOR c1 IS SELECT * FROM USER_TABLES WHERE rownum<:1;
crec c1%rowtype;
BEGIN
--works fine
OPEN c1;
--isn't possible ?
--OPEN c1 USING 3;
[Code]....
just looking around to use the new feature available in oracle 11g to convert the dbms_sql numeric cursor to reference cursor, how to do it?
parse and execute the sql string first with dbms_sql and then convert it to ref cursor?
I want to return ref cursor based on explicit cursors
create table jumbo(id number, name varchar2(20));
insert into jumbo values(1,'jumbo');
create table mumbo(id number, name varchar2(20));
insert into mumbo values(1,'mumbo');
commit;
[Code].....
The above procedure has compilation errors when I am trying to open ref cursor
LINE/COL ERROR
-------- --------------------------------------------------------
20/24 PL/SQL: SQL Statement ignored
20/38 PL/SQL: ORA-00942: table or view does not exist
32/24 PL/SQL: SQL Statement ignored
32/38 PL/SQL: ORA-00942: table or view does not exist
SQL>
Can i user exist when cursor will using For Cursor .
View 15 Replies View RelatedHow can "call one trigger of item in trigger of form"
View 5 Replies View RelatedCan we call trigger in another trigger,if it is possible any example.
View 1 Replies View RelatedI'm having some minor trouble with my sqlplus in Windows. Don't know which feature I accidentally edited by cosole seems to be in debug mode. Everything is ok, except that it print the old and new values of my variables. How can't I restore it to it's original behavior.
View 3 Replies View RelatedI need a query to find out the working days. I have attached the sample script to create table and data. Here is the description of the tables.
Emp1 : To record the employe's information and weekly rest day.
Attendance :- To record daily attendance.
Leave_appovd : To record the approved leaves.
Holiday : To record the holidays.
W = Attendance
R = Weekly Rest
L = Leave
H = Holiday
A = Absent
Required output is
Emp No.In Date Out Date Type
736912/1/201212/1/2012W
736912/2/201212/2/2012R
736912/3/201212/3/2012W
736912/4/201212/4/2012W
736912/5/201212/5/2012W
736912/6/201212/6/2012L
736912/7/201212/7/2012H
736912/8/201212/8/2012H
736912/9/201212/9/2012R
736912/10/201212/10/2012A
736912/11/201212/11/2012W
736912/12/201212/12/2012W
736912/13/201212/13/2012W
736912/14/201212/14/2012W
736912/15/201212/15/2012L
736912/16/201212/16/2012L
736912/17/201212/17/2012L
736912/18/201212/18/2012W
736912/19/201212/19/2012W
736912/20/201212/20/2012W
736912/21/201212/21/2012W
736912/22/201212/22/2012W
736912/23/201212/23/2012R
736912/24/201212/24/2012A
736912/25/201212/25/2012A
736912/26/201212/26/2012A
736912/27/201212/27/2012W
736912/28/201212/28/2012W
736912/29/201212/29/2012W
736912/30/201212/30/2012R
736912/31/201212/31/2012W
778212/1/201212/1/2012W
778212/2/201212/2/2012W
778212/3/201212/3/2012W
778212/4/201212/4/2012W
778212/5/201212/5/2012W
778212/6/201212/6/2012W
Separate Query will be run for the following output.
Wroking Days
EmpnoAttend WeeklyRestsLeavesHolidays TotalAbsentsG. Total
7369 17 4 4 2 27 4 31
7782 6 0 0 0 6 25 31
If any body work on weekly rest or holiday, it will be considered as weekly rest and holiday. There working on these days will be treated separately.
with a as (
SELECT subscriber_agn,max(ixml_id) ixml_id, claim_id
FROM
(
[Code].....
i want to combine above two and need only one sql stmt.
SELECT sno,mid,mname
FROM manage_date
WHERE mname IN
('KIRAN-KUMAR',
'RAHUL-RAJ',
'KAUSHAL-SONI');
IF I use this query directly in DB it's working fine. But when this query is calling in .net using parameter as below it's not giving any records for more than one value. IN (:p_mname)
If I pass one name 'KIRAN-KUMAR' from .net It's working.
If I pass multiple names from .net query not returning any records.
I trying to create the new service for my physical standby database. It's on the same vista machine. But somehow it's not working.
C:\Oracle\product\10.2.0\mayuprd\database>oradim -new -sid -intpwd ananya -start
mode manual
DIM-00003: An argument is missing for the parameter.
I went through the link given in orafaq and tried to work on my system but the things did not work.
SQL> select *
2 from v$version;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> ALTER SYSTEM SET recyclebin = ON;
System altered.
SQL> SELECT Value FROM V$parameter WHERE Name = 'recyclebin';
VALUE
--------------------------------------------------------------------------------
ON
SQL> CREATE TABLE TEST_RBIN(VAL NUMBER);
Table created.
SQL> INSERT INTO TEST_RBIN(VAL) VALUES(10);
1 row created.
SQL> COMMIT;
Commit complete.
SQL>
SQL>
SQL> DROP TABLE TEST_RBIN;
Table dropped.
SQL> SHOW RECYCLEBIN;
SQL> SELECT * FROM USER_RECYCLEBIN;
no rows selected
why my "select into" not working.i also create the table testjobs but also not working
SQL> select *
2 into testjobs
3 from jobs;
into testjobs
*
ERROR at line 2:
ORA-00905: missing keyword
I am unable to configure EM(Oracle 11.2g) on Redhat Linux 5 Enterprise edition(32 bit). Environment variables are set to correct SID. If I try to run dbca the wizard does not display the Enterprise manager configuration screen. I have tried to create repository by using emca -config dbcontrol -db config.
But it throws exception that database instance is unavailable?
I have a piece of code that joined the same table onto itself twice in order to get the previous, current and future year's into columns in the same output.
Up until recently this has been working fine but the most recent data has just been uploaded into the table and now it comes up with an error.
On the second (left outer) join it now says that the column is ambiguously defined (ORA-00918). It doesn't matter which order the joins are in it is always the second join that the error pops up on.
I tried to insert date in date column from another table date column. Below is SP ans execute procedure.
CREATE OR REPLACE PROCEDURE test(
start_time Varchar
)
AS
BEGIN
DBMS_OUTPUT.ENABLE(1000000);
DBMS_OUTPUT.PUT_LINE(start_time);
Insert into test_ora (report_date) (select start_time from
[code]....
execute test ('27-10-2011 12:01:01');
It gives error as Invalid number.
following is a query which i find difficult to understand why EXISTS is failing. There are two scenarios where if i block LINE 30 and unblock line 31 of the code then one record is returned.
SELECT A.ENTITY_CODE,
A.VRNO,
A.VRDATE,
[Code]....
oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
I am doing a simple INSERT INTO from the sql developer window. it shows that 1 row inserted, but when i query, it doesnt give th values.
insert into events_main(event_id,event_number,last_update_Date, last_updated_by)
values(162,999999, sysdate, 'rkhatiwala');
COMMIT ;
this does not give any error, but when i do
select * from events_main
where event_id = 162
it does not return anything.
