CDC Publish / Subscribe Usage With ETL On Oracle 10g
Oct 12, 2012
I have a question about the CDC publish/subscribe usage with ETL on Oracle 10g. Is the ETL logic code part of the subscriber part? In other words, when the publisher is notified of a record change and sends the record to the staging area then calls the subscriber. Is the subscriber that runs the ETL logic that processes the record before it is sent to the DW/Dim tables? Something like this flow:
i work in an application that should make the replication from a publusher table to a remote subscribe table, using snapshot,and trigger, replication data of update works perfectly (update,insert,delete), but when i try to add or dropp a clumn in the publisher table, repplication fail, i know that my method d'ont replicate ddl statment like create or alter table, so i would like the better way to do the replication of the ddl statment without loosing tha data in the subscribe table, i'm working with oracle XE,
I have one issue regarding this column values displaying ,in one column value has contains big length ,total i have 8 columns ,now i want to show all columns with fixed width even data in particular column had big length will display next line not next row.
example: oracle and "oracle,Business,intelligence" are the data in two columns these two columns data column 1 and column 2 now i want to display in column1 'oracle' and column2 first line 'oracle' ,second line 'Business ' and next line 'intelligence' like below
We are running Oracle Apps 11i on Windows 2003 R2 Enterprise SP2 (32 bit). After enabling /3GB switch parameter in Boot.ini file, the OS recognizes the 8GB RAM and consumes it upto 5.6GB during non-peak hours but as workload increases in evening when end users generate auto receipts the same memory usage ratio reaches upto 6GB resulting the OS gets hang and don't respond at all. Inspite of having 2GB free memory it doesn't consume it. We have to shut down it by pressing the power off button and restart it
The system configuration is as under: HP ProLiant DL380 G6 Intel Xeon 2.4 GHz 8GB RAM (4 x 2 GB)
After the reboots each system was using around 30 GB of memory... now that it's been up for a week memory is up to 98GB used on each system. None of the systems are swapping.
After installing a 4 node cluster 11.2.0.3 with 16 CPU's (4 on each node) on IBM 795 with aix 6.1 each server is using 0.5 CPU with no user load on the system. Running SIHA on one server typically uses 0.05 CPU with no user load on the system.
We are using the 11g AMM feature and Memory_Target set to 96GB and total RAM on the Server is 128GB Now the top and free shows up only 200MB memory free on the system.
There are 2 process dbw0 and dbw1 which consumes the top memory and this is 30GB per dbw.
Why is the dbw process taking up so much memory when there is not much load on the database.
we have 96GB Memory on the UNIX server and 85% of its usage shows oracle processes I want to determine which Oracle processes are taking most of the memory
SGA is around 36G SGA_TARGET is 40G PGA is around 4G
the total of around 40-45 GB of usage is understandable but what other oracle process are chewing up the remaining 30-40 GB on the server is not known
load averages: 7.35, 6.46, 6.15; up 248+11:33:21 12:25:03 2202 processes: 2196 sleeping, 1 zombie, 5 on cpu CPU states: 83.8% idle, 10.5% user, 5.8% kernel, 0.0% iowait, 0.0% swap Memory: 96G phys mem, 15G free mem, 128G total swap, 128G free swap
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND 21720 oracle 258 0 0 40G 40G cpu/48 215:28 2.04% oracle 10709 oracle 1 0 2 1816K 1448K cpu/9 0:02 0.90% res_conf_email_ [code]......
There is an 'emp' table with a column name as 'mgr' with datatype 'number'. following is the detailed description of the table:
SQL> desc emp;
Name Null? Type ----------------------------------------- -------- --------------------------- EMPNO NOT NULL NUMBER(4) ENAME VARCHAR2(10) JOB VARCHAR2(9) MGR NUMBER(4) HIREDATE DATE SAL NUMBER(7,2) COMM NUMBER(7,2) DEPTNO NUMBER(2)
Now when I run the 'select mgr from emp e;' query the output which I get is:
7902 7698 7698 7839 7698 7839 7839 7566
7698 7788 7698 7566 7782
Note: One value in between here is null, the required to me is that I want to print a character value 'President' in place of null .
I have one procedure which is executing daily two times(i.e morning run and evening run) . In morning run it's executing around 150 mins and evening run executing around 25 mins.
It's happening for all procedures executing in longer run in morning. There is NO LOCKS, I have checked LOCKS while executing morning run. I suspects CPU usage in morning run.
How to check CPU usage ? AND also each session how much utilizing CPU. I'm using oracle 8i database, I know it's older version but my company is using oracle 8i. So i have to look in this database version only.
I have a table "tl" which is partitioned--say 30 partition and for each partition there is a seperate view like as follows
create view view_t130 as select * from tl partition (p30); create view view_t129 as select * from t1 partition (p29); . . . create view view_t101 as select * from t1 partition (p01);
my question is how to use hints on this table if your are using view to access the data from internal table.
Normal structure is if i don't wrong:-
index( <<view name|view alia name>> <<table name|table alias name>> name of index)
Consider my case
select * from view_t130 where <index_column> --not picking up index
i want to give expicit index hint.so i used the same structure that i specified above but it didn't work.
select /*+ index( view_t130 t1 <index_name) */ * from view_t130 where <index_name>
how to give explicit index hint..but one constraint is i cannot give any alias names for internal tables because those(view structure) are generated by predefined scripts..so it's not possible to change it.
create or replace directory UTL_FILE_DIR as 'k:lob_test'; GRANT READ,WRITE ON DIRECTORY UTL_FILE_DIR TO user1;
and then ,I login use user : user1
create or replace package body p_utl_mail_attach_raw as procedure send_single_user_attach_raw(........) fil BFILE; filenm VARCHAR2(50) := 'aaa.jpg' begin fil := BFILENAME('UTL_FILE_DIR', filenm); end ;
this result it show : UTL_FILE_DIR/aaa.jpg, exists=F, length=0, open=F
I'd like to have a conditional that only gets the next value from a sequence is the current (or supplied) value is null.
Here are some trivial examples:
CREATE SEQUENCE ts MINVALUE 1 START WITH 1 INCREMENT BY 1; SELECT ts.NEXTVAL FROM DUAL; SELECT COALESCE(ts.CURRVAL, ts.NEXTVAL) FROM DUAL; SELECT NVL(ts.CURRVAL, ts.NEXTVAL) FROM DUAL; SELECT CASE WHEN ts.CURRVAL IS NOT NULL THEN ts.CURRVAL ELSE ts.NEXTVAL END FROM DUAL;
Ideally multiple executions of any of these (or a better one of your design) should return the same value from the sequence, but mine do not.
I have one table and I created partition month wise. I also creates index on that table. How can I check whether parition will be used when I query that table? In explain plan I can see PARTITION RANGE as ALL. Is it using the partition?
I can get "CPU used by this session' value from v$sesstat. That is the value in centiseconds used by each session. How to convert the value into a percentage of total CPU resource ?
Or there are some other ways to gain the value. i.e. Percentage of Total CPU usage for each Oracle session.
I am building a reporting table using the count analytic function in order to count up several different attributes in one statement.What I find is that this method quickly eats up my TEMP space. This is 10gR2. I have attempted to use MANUAL workarea policy with as large ofsort_area_size as possible (2G) but that does not seem to have any effect on performance or TEMP usage. The RAW table is about 12G with 75 million rows. I am not that concerned about execution time, but rather TEMP usage.
--INSERT into <object>... select distinct file_sid,filename,control_numb,processing_date,file_class, vendor_id,vendor_desc, c_status_id,c_status_desc,
[code]...
I am not seeing any increase in onepass or multipass executions on the PGA during execution of this statement using...
SELECT CASE WHEN low_optimal_size < 1024*1024 THEN to_char(low_optimal_size/1024,'999999') || 'kb <= PGA < ' || (high_optimal_size+1)/1024|| 'kb' ELSE to_char(low_optimal_size/1024/1024,'999999') ||
[code]...
I'd like to get a better explaination of how analytics use the instance resources and TEMP space. For example if I add a count with a different window (such as the last two columns commented in the above query) I blow out my temp space (70G). Is the critcal factor the use of distinct? or multiple windows? or something else?
i have created a stored procedure with a cursor in order to perform a function where the annual_sal from the employee_annual_sal table is refered and checked. The empno for all the records which satisfies the condition mentioned inside the loop should be displayed in an variable. My code is below
create or replace PROCEDURE sp_test_cursor(out_empno OUT number) IS v_get_data number; v_get_empno number; cursor c1 is select annual_salary from employee_annual_sal;
[Code]...
What should i do to return mulitple values in a single variable??
I have a requirement where the user input values will be passed as comma separated string to backend, which is queried against the table using instr. But the index present on the table is not using the index , due to the instr function.How can I create a index in such a way that The instr function uses it.
The below query is going for full table scan due to this.
select * from test_idx where (INSTR (','||'E10000'||',', ',' || ccn || ',') <> 0 OR 'E10000' = 'DEFAULT') and mod='90396' and rpt_flag='O' and smp_identifier=2
how to recreate the above index so that these queries uses this index.
Am trying to use the SYS_CONTEXT variables inside a trigger. After reading the documentation I found that the below query when used inside the trigger code will return the trigger owner.
Select Username from User_Users
Will any of the below variables return the trigger owner when used inside the trigger code
sys_context('USERENV','CURRENT_USER') or sys_context('USER','CURRENT_SCHEMA')
I have made a package and define a variable in it as:
CREATE OR REPLACE package Scott.My_Pac as CNT_UPD_USR Varchar2(20) END My_Pac;
When I used the following in Toad it works fine but when I use the same in 10g form it gives the error "Cannot directly access remote package variable or cursor".
Begin Scott.My_Pac.CNT_UPD_USR := 'Ali'; DBMS_OUTPUT.PUT_LINE(Scott.My_Pac.CNT_UPD_USR); End;
Is there any way to tune the following query using lot of CPU:-select description,time_stamp,user_id from bhi_tracking where description like 'Multilateral:%'The explain plan for this is query is:-
Bhi_tracking is used for reporting purpose and contain millions of records.Generally we keep one year data in this table and delete the remaining.Can I drop the table after taking export and then import it back or can i truncatethe table and then insert the rows into it to enhancethe performance.
