I need to configure rman backup via oracle enterprise manager.Database is not in archive mode, rman shutdown the database and made a "startup mount" for backup.
I set up a backup on disk and the test is successful When I plan the backup job, database shutdown but the backup is not working and after database is not started.
here is the log of the backup job :
shutdown immediate; SP2-0640: Not connected -> ->Connected Database closed Database dismounted. ORACLE Instance shut down. startup mount
I am using the following query to determine if my rman backup succeeded for failed. I look for "COMPLETED WITH ERRORS"
col input_type format a10 col bck_hrs format 99.9 heading "Run|Time" col status format a21 col end_dt format a20 heading "End|Time" col mbytes_per_sec format 9,999 heading "Output|Rate|MB/sec"
[code]...
output ======
End Run Output Rate INPUT_TYPE STATUS Time Time Size GB MB/sec ---------- --------------------- -------------------- ----- ---------- ------ ARCHIVELOG COMPLETED 2011-12-24 06:03:54 .5 189.4 106 DB INCR COMPLETED 2011-12-24 05:33:05 9.3 3,392.6 103 ARCHIVELOG COMPLETED 2011-12-23 10:12:27 .2 73.3 105
I know that the DB INCR is an INCR 0 backup but is there some way query I can join with my example above to tell me this is INCR 0 or FULL BKUP?
I was thinking maybe setting "COMMAND_ID" some text like INCR 0 or INCR 1 or FULL BKUP. Does that sound feasible
We run rman backups every night (level 0 on weekend, level 1 other 6 days). Backups are running fine. The problem I'm having is we also have a OEM report that runs morning to report on the status of those backups. For some reason, the status of the OEM database is always "RUNNING", everything else is "COMPLETED". This is the sql that is being run:
SELECT DB_NAME, STATUS, START_TIME, END_TIME FROM RMAN.RC_RMAN_STATUS where start_time between sysdate - 1 and sysdate and operation = 'RMAN' order by db_name, start_time desc;
The status reports runs at 7AM and all the backups run between noon and midnight, this is the output from the sql:
I am not able to take backup of table which is partitioned.Whenever i start the backup it was hanging with wait event "asynch descriptor resize", so I tried to create another table using original table ( like create table BASE_TABLE AS SELECT * FROM BASE_TABLE), but it is also hanging with same wait event.
I just switched my STBDY DB to a PRIMARY DB and I am ran the following:
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
using target database control file instead of recovery catalog old RMAN configuration parameters: CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; new RMAN configuration parameters: CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; new RMAN configuration parameters are successfully stored ORA-00245: control file backup operation failed
RMAN-08132: WARNING: cannot update recovery area reclaimable file list
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ORARZULB are: CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS; CONFIGURE BACKUP OPTIMIZATION OFF; # default CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; [code]....
what causes this warning and how to get rid of it?
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26 BR0505I Full database backup (level 0) using RMAN successful BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
I want to ask if I restore a control file from backup of say day2 and I recover till day1 using RMAN script, then what will be the state of my database? I mean day2 control file may be having SCN-Day2, and I am instructing RMAN to recover till past point in time that is SCN-Day1.
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba mankp_acressit.bat D:>rman catalog rman/******@acressit target / cmd file=E:sgdba mankp_arch.rcv log E:sgdba mansit_arch_rman_backup.log RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00556: could not open CMDFILE "E:sgdba mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
run { CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F'; CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS; sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
I am trying to open the database bur gettinf following errors
ERROR at line 1: ORA-01194: file 1 needs more recovery to be consistent ORA-01110: data file 1: 'C:ORACLEPRODUCT10.2.0ORADATAORCLSYSTEM01.DBF'
SQL> shutdown ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Total System Global Area 289406976 bytes
I am trying to move my data files from one location to other as i ran out of space.
SQL> alter database rename file 'C:oracleproduct10.2.0oradataSPF433SPF433ADW_DATA.DBF' to 'D:OracleDatafilesSPF433SPF433ADW_DATA.DBF'; Database Altered
SQL> alter database rename file 'C:oracleproduct10.2.0oradataSPF433SPF433ADW_DATATEMP.DBF' to 'D:OracleDatafilesSPF433SPF433ADW_DATATEMP.DBF' Database Altered
Now when i am trying to run Alter Database open I get ORA-01113: file 5 needs media recovery error
I have an oracle autoback of controlfile and spfile. I am trying to restore the production database using this backup, into a new server with a different directory structure.
I have completed the following steps in the restore process.
1. Creating a pfile from spfile
2. Changing the the location of cdump, udump, bdump and the control files ( there are three )
3. Then creating a spfile from this pfile
I am stuck on the next step where to rename all the datafiles and tempfile and restore the database. Following is what I did.
After mounting the database in RMAN, tried to run the following.
RMAN> run 2> { 3> allocate channel c1 device type disk 4> ; 5> @/home/oracle/rman_scripts/newloc.rman 6> SET NEWNAME FOR DATAFILE 1 TO '/u02/oradata/dorian/system01.dbf'; 7> SET NEWNAME FOR DATAFILE 2 TO '/u02/oradata/dorian/undotbs01.dbf'; 8> SET NEWNAME FOR DATAFILE 3 TO '/u02/oradata/dorian/sysaux01.dbf'; 9> SET NEWNAME FOR DATAFILE 4 TO '/u02/oradata/dorian/users01.dbf';
[code]....
I am getting the following error message.
Starting restore at 25-JAN-2012 21:26:48 released channel: c1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 01/25/2012 21:26:49 RMAN-06026: some targets not found - aborting restore RMAN-06100: no channel to restore a backup or copy of datafile 30 RMAN-06100: no channel to restore a backup or copy of datafile 29 RMAN-06100: no channel to restore a backup or copy of datafile 28
I am trying to backup my control on a STBBY DB(RAC) and I am getting the ollowing error.
ORA-00245: control file backup failed; target is likely on a local file system
what the issue is? Note the FS is ACFS and can see on all my nodes
show all; using target database control file instead of recovery catalog RMAN configuration parameters for database with db_unique_name PA01INS_IM3L059B are: CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default CONFIGURE BACKUP OPTIMIZATION OFF; # default
[code]...
ACFS file system
df -h /share/dbbkup/oracle/PA01INS/rman Filesystem Size Used Avail Use% Mounted on /dev/asm/pa01ins-33 75G 2.6G 73G 4% /share/dbbkup/oracle/PA01INS rman cmdfile=control.rman
how i can change backup datafile name into its original file name,bcoz at time backup datafile name is different and how i can change that name into its original datafile name so i apply recovery command in user managaed recovery..
SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01152: file 1 was not restored from a sufficiently old backup ORA-01110: data file 1: 'F:APPADMINISTRATORORADATATHIRDBSYSTEM01.DBF'
To get rid of this , I tried following,
SQL> recover database using backup controlfile until cancel; ORA-00279: change 1004739 generated at 09/26/2011 10:31:34 needed for thre ORA-00289: suggestion : F:APPADMINISTRATORFLASH_RECOVERY_AREATHIRDBARCHIVELOG2011_09_27O1_M
I take hot backup of database at 10:00 am.After taking the hot backup 50 archived logs are created.Out of 50 i have backed up first 25 of them and at 5:00pm i lose complete database including control,data and the last 25 archived log files that were not backed up.So I am using latest hot backup to recover
I restore the control file backup and datafile backup taken during ho tbackup(10 am) and i issue the command
.......startup mount >>>>>>>Recover database until cancel !!!!!!! Apply the available 25 archive logs
then i give "cancel" since I dont have the next redo log .Now in which mode will the database open(Reset logs or no reset logs)
I want to restore control file from backup set,just as the flowing command,where location does the control file be restored to? how can i specify the location when restore control file?
restore controlfile from '/u01/rman_backup/mybak/df_768589733_7_1.bak';
taking the backup of a control file, as i am taking online backup, archive mode.
At first i have executed the statement
sql> alter database backup control file to trace;
then i have removed the control files and enterd some data in a table and committed it.As my oracle is not shutting down, so i shut aborted it. Now after saving the last file from the udump as obkp.sql i am unable to edit this file and use.
how to edit and use this file, so that i can startup my database normally.
During a duplicate process to a new database name, rman crashed after the restore but before the switch datafile all.So now, we have under ASM the data files under the correct (new) diskgroup but v$datafile contains the previous names (and so diskgroup) and v$datafile_header is empty. RMAN is completly lost, our solution is to manually rename each file under SQL*Plus using ALTER DATABASE RENAME FILE. Unfortunately, we are using or migrating to OMF, so file names are meaningless and we are unable to associate ASM files with database files.
Any way (query or anything else) to associate the ASM files to the database files. Here's an abstract of what we have for one (small) tablespace:
ASMCMD [+ORAXQG1_L136_DG1/ORAXPG1/DATAFILE] > ls -l N47CAW* Type Redund Striped Time Sys Name DATAFILE UNPROT COARSE NOV. 12 10:00:00 Y N47CAW1.276.799152039 DATAFILE UNPROT COARSE NOV. 12 10:00:00 Y N47CAW1.318.799151641 SQL> select file#, name from v$datafile where ts#=17 2 / [code]...
Oracle10g to Sybase12.5 Migration:- How a Oracle dump file can be converted to any text file/xls file which will be loaded in sybase database later through BCP.
means 1.Exporting objects as dump file from Oracle. 2.Is there any tool/process available that can convert this into csv/txt/xls file. 3.This files can be loaded in sybase.
I am getting this following error.After that we added more space to that.But still it is showing. What might be the issue.
ORA-01652: unable to extend temp segment by 128 in tablespace TBSDESDBTMP *Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
It is showing to add datafile to that tablespace .How to achieve this.
