Backup & Recovery :: Advantage Of Using RMAN In Oracle 11g Standard Edition
Apr 15, 2013
We are upgrading from oracle 9.2.0.8 to 11g r2, and both are Standard Edition database. The database is part of a product that runs on a customer site, and won't get bigger than 50 GB. It runs in archive mode, and our backup script does a hot backup every night, plus copying the archive logs, redos, controlfiles, etc. We save 2 entire backups - from the last night plus the night before last. Then there's a tape backup that saves the backed-up files to an off-server location.
This architecture has allowed us to recover our customer's data from many odd occurrences at customer sites (power loss during a hot backup, corrupt controlfiles/datafiles/archivelogs). My question is, given that we are running the Standard Edition database, which doesn't have most of the useful RMAN features, is it worth it to switch to RMAN?
I took an Oracle Backup and Recovery class and posed this question to the instructor, and the response was, it would be better to use RMAN over a manual user backup script. Our backup script is pretty battle-hardened - is that the best reason?
View 6 Replies
ADVERTISEMENT
Feb 20, 2013
I am using Oracle 10.2.0.3.0 standard edition. Now i want to use Oracle XDB in the same.
Can i use this directly or does this require license.
View 2 Replies
View Related
Nov 4, 2011
The only supported technique for converting an EE database to SE is export-inport, as documented in note 139642.1. Our client is reluctant to do this because of the downtime involved. It is however possible to open the EE database from an SE home, no problem.
The note says only Quote:When you just install the Standard Edition software, you will end up with Data Dictionary objects which are of no use (or perhaps even invalid) and possibly create problems when maintaining the database.
View 2 Replies
View Related
Sep 13, 2011
I want to know, Is NVARCHAR2 available in Oracle standard edition?
View 5 Replies
View Related
Oct 8, 2013
I have requirement where replication should be done between two 11gR2 RAC on Standard edition.I have following queries,1. Does Standard edition support DDL capture?
Im asking this because on
[URL]......
it says "SE1/SE: no capture from redo" what that really mean ??2. Can it be possible to configure capture at schema level and skip only some of the tables / triggers ?
View 2 Replies
View Related
Feb 5, 2013
I read that Oracle RAC which is bundled in Standard Edition can support at max 4 sockets. One of my client has a proposal of using RAC but for 3 nodes each using single 1 quad core Intel processor. As far as i understood, an Intel quad core is a multi chip module and actually is a combination of 2 modules dual core, so each Intel quad core may be counted as 2 sockets. Which yield to the proposal of my client will be failed, as the total number of sockets in it will be: 2*3=6 that exceed the max 4 support.
View 4 Replies
View Related
Nov 6, 2012
my customer wants to create a standby database for his production database (Oracle Standard Edition 11g R2 @ Windows 2008 R2 64 Bit). Now any proof-of-concept which explains shortly the concept and how to achieve it.
View 4 Replies
View Related
Mar 18, 2013
In our current setup we have RAC on standard edition and client is now planning to go for Enterprise Edition but not yet decide because of cost. Is there any difference between Grid Infrastructure 11gR3 Enterprise edition and Standard Edition ?
They told me to first install Enterprise Edition and then will move to Standard Edition if they can't get the EE license so in that case do i have to re-install Grid infrastructure for standard edition?
View 6 Replies
View Related
Jul 31, 2012
I have the RMAN full database backup of oracle 10g (10.2.0.3) on Sun Solaris OS which i want to restore on oracle 11g (11.2.0.3) on Linux OS. The backup pieces was transferred to oracle 11g server manually in binary mode.
-rwxrwxr-x 1 mepc dba 36356096 Jul 16 14:49 snapcf_MEPC.f
-rwxrwxr-x 1 mepc dba 166028800 Jul 16 15:29 MEPC_full_backup_MEPC_nnnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 169567744 Jul 16 15:29 MEPC_full_backup_MEPC_nmnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 164813824 Jul 16 15:39 MEPC_full_backup_MEPC_nonbkn9f_1_1
-rwxrwxr-x 1 mepc dba 144025600 Jul 16 16:06 MEPC_full_backup_MEPC_nqnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 168576512 Jul 16 16:09 MEPC_full_backup_MEPC_npnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 168649216 Jul 16 17:33 MEPC_full_backup_MEPC_o5nbkpvv_1_1
[code]....
the backup is taken in above format. I know the ORACLE_SID and dbid of the database from which the backup has been taken. whenever i tried the following command
mepc@tcstctmatson:/mepc_backup/May22fullbkp$ rman target /
Recovery Manager: Release 11.2.0.3.0 - Production on Tue Jul 31 12:14:54 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: MEPC (DBID=1595278680)
RMAN> shutdown;
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started) Oracle instance started
Total System Global Area 1071333376 bytes
Fixed Size 1349732 bytes
Variable Size 620758940 bytes
Database Buffers 444596224 bytes
Redo Buffers 4628480 bytes
[code]....
the file is not corrupted as i checked the checksum on both the servers and it is same.how can i restore the RMAN oracle 10g backup in Oracle 11g.
View 5 Replies
View Related
May 23, 2012
what is %N determines in Oracle RMAN HOT Backup. In some documentation it says it gives you backup with respect to tablespace. Is it a version specific ..bcos when tried in above version it failed....
View 4 Replies
View Related
May 21, 2012
I installed 11g on linux rhel 5.2 by manually. now databse is ok . But some Schema HR , Scott , Oe are not come. but database fully work. ok.
Now i am trying to connect Rman.
export ORACLE_SID=ORCL
rman target /
then I have a error that SYS.DBMS_BACKUP_RESTORE is not found.
but sql> desc sys.dbms_backup_restore package is available.
which script are run to solve it , because only catalog.sql and cataproc.sql script are run in installing of oracle 11g manually instalation.
View 3 Replies
View Related
Feb 10, 2011
We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
View 11 Replies
View Related
Jul 25, 2013
,I am new to Oracle database administration i am working on a 24*7 tool .the tool will work as a non stop.this is a standalone tool.there wont be any one who will be taking care of the database.I need to design a backup statergyNeed to take backups on timly basis.Since the database can't be go offline cold backup's can not be useenhot backup needs to implemented.what are steps needs to do for hot backup.Is there are some pre defined scripts to run the backup.
View 6 Replies
View Related
Oct 18, 2011
I have problem on using "delete obsolete" in RMAN.
First, let describe my backup configuration.
1. Full backup every Monday (17-Oct, 10-Oct, 3-Oct, 26-Sep)
2. Incremental backup for other days
3. Enable autobackup of control file
4. Backup archive log every day
5. RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS
6. Execute "Delete obsolete" every day
7. control file is used instead of catalog
The results observed:
1. Backup of control files older than 30 days will be deleted
2. Backup of archive log files older than 30 days will be deleted.
3. Backup of datafiles older than ~14 days but before 30 days are also DELETED.
In my example, the backup of datafiles created at 26-Sep is deleted at 16-Oct.
I tried "restore database validate until time "sysdate-22"" at 17-Oct. And RMAN reported "datafile xx will be created automatically during restore operation". It seems that RMAN failed to do restoration up to 22 days ago. The retention policy I set seems not effective on datafile backups.
I checked view v$backup_set and the "Keep" is "No" and "Keep until" is empty.
The only thing I can think of, is the settings of "CONTROL_FILE_RECORD_KEEP_TIME". It is marked "7" in the Oracle, which is less than the retention. But I suppose this only causes the backup not deleted, but NOT be deleted earlier.
View 6 Replies
View Related
Oct 18, 2012
understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies
View Related
Sep 12, 2012
Recently we have downgraded our database from enterprise to standard edition.....our sga size before downgrade was 11 gb and now it is 11gb and there is no as such problem in database..I have read somewhere that standard edition doesn't support sga size more than 2 gb .
View 1 Replies
View Related
Jan 24, 2011
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
View 17 Replies
View Related
Aug 13, 2013
My scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
View 9 Replies
View Related
Feb 11, 2011
I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
View 11 Replies
View Related
Jun 25, 2013
While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
View 7 Replies
View Related
Sep 30, 2012
how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?
View 6 Replies
View Related
Feb 10, 2011
I am checking out licenses. We all know that EE is much more expensive than SE. But many customers do have EE installed - unsure if they need all the features at all. After several years of production, a downgrade is considered 'risky' and we continue to pay the full EE.
How can we check and be sure that a downgrade to SE would not be any problem?
Some checks include:
* partitioning used in user schemas? --> no downgrade to EE
* bitmap indexes in user schemas? --> no downgrade to EE
How can we complete this list, or is there some script to make this easy?
View 7 Replies
View Related
Jan 4, 2012
when i performed incomplete recovery i try to set until time but it shows RMAN-20207:until time or recovery window shoubld be before resetlogs.
View 3 Replies
View Related
Jan 1, 2012
REGISTER DATABASE;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 01/01/2012 11:02:40
RMAN-06428: recovery catalog is not installed
View 4 Replies
View Related
Feb 7, 2011
I have a doubt regarding the process the RMAN follows for restore and recovery of the database.
My Level 0 full backup completes on Saturdays at around 11 am after taking 8 hours (It starts at 3am).On Sunday, I ask RMAN to restore (on a different box) till Saturday 11:30 am.Then, after the restore is successful, I recover it till 11:45 am.
The recovery also goes fine and Iam able to clone to test box.
Till what time is the database restored? I assume its till 11 am since the L0 backup finishes at 11 am though I have asked it to restore till 11:30 am
During the recovery, ONLY the archives generated between Saturday 3 am and till the time i asked for recovery (Saturday 11:45 am ) are required. But, checking the recovery log file, i was surprised to see that RMAN has restored archive files starting from Friday 9:30 pm (Much before the time the Level 0 backup even started).
why does RMAN require the old archive log files.
View 4 Replies
View Related
Feb 26, 2012
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
View 1 Replies
View Related
Dec 22, 2012
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
View 2 Replies
View Related
Jan 28, 2011
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
View 13 Replies
View Related
Feb 9, 2011
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies
View Related
Jan 8, 2013
Is this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;
run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
[Code]....
View 1 Replies
View Related
