Application Express :: How To Search By Displayed Value
Apr 15, 2013
When a format mask is applied to numeric field in an Interactive Report, e.g. 999G999G999G999G999G990, search operations from the Search Bar do not match any entries if the mask characters are included. For example, the data value from the database is: 2251343000. When the above, example format mask is applied, this is displayed as 2,251,343,000. However, if the user enters 2,251,343,000 in the search bar (which would be the natural thing to do), nothing matches. On the other hand, if the user enters 2251343000, a match is found.
This seems like counter intuitive behavior to me since the whole point of the tool bar is to allow "self-service" for the user. Training them to remove commas, dollars signs or whatever is not very popular.
View 2 Replies
ADVERTISEMENT
Jul 15, 2012
I am using apex 4.1. I must hide phone number columns in my IR report, but at the same time the values of that columns should be available to search for using IR Search Field. is there a way to do this ?
if not, that means I have to :
1- Add a text filed P1_PHONE
2- edit my report query to something similar to
> Select * from Table where :P1_phone in (mobile1,mobile2) or :p1_phone is null
3- add button to refresh the report.
but the item P1_PHONE should be on the header of the Report region. is there a way to do this.
I am using theme 23
page template without sidebars
Report template : Reports Region.
how to put the item P1_PHONE on the tab of the page. Just similar to the Search item of in the Application Builder.
View 7 Replies
View Related
Jun 12, 2012
Env: APEX 4.1
For example, initially I created the reprot source as select c1, c2, c3 from t; later I added c4. But i was unable to figure out how to make c1, c2, c3, c4 become default displayed columns. I always have to click Action -> Select Columns, then move C4 from "Do not Display" to "Display in Report".
View 8 Replies
View Related
Dec 18, 2012
We have apex application with one record report that shows image.We use database procedure to show image.And call it in apex like:
'<img src="show_image?p_id=' || NVL(dp.id, 0) || '" height="200" width="200" />' as image
But the image is not shown. We only see broken image icon.With right click on broken icon, we can save it and it's actual image we want to display.
If we call procedure like: URL.....
If we use the same procedure on another table with images which are smaller, then the image is shown.Minimum image length in table A is (DBMS_ LOB.getlength (file)): 105243..Maximum image length in table B is: 1702. URL....
View 7 Replies
View Related
Apr 18, 2013
I have just created the basic employee information form in which i upload the photograph of the employee. The photograph gets uploaded but it does not display properly. I have already referred the sample database application to display the image. Moreover, i have followed the same steps as it is used to display the product image in that application. Still i am unable to get result. I am getting following output:
<img src="apex_util.get_blob_file?a=35682&s=101496289174102&p=15&d=10639237623242912156&i=10639236703270912154&p_pk1=21&p_pk2=&p_ck=FCA12832591A1C706D76FDD589E551A2" />
View 11 Replies
View Related
Sep 24, 2012
In Application Builder, is there a way to searching the application and replacing text within it?
I have an application item named "FORMAT_TYPE1". I would like to perform a find and replace action (just like a word processor) where any part of the application that has name or text "FORMAT_TYPE1" in whole or in part is replaced by the text "FORMAT_CATEGORY1". For example:
FORMAT_TYPE1 becomes FORMAT_CATEGORY1
&FORMAT_TYPE1. becomes &FORMAT_CATEGORY1.
The find/search would do it in any attribute, source code in the application. There is only a Search Application feature, which is useful in identifying places, but lacks any replace function. Is there something else that will do this, besides exporting, editing the source code in a text editor, and then importing the application again?
View 0 Replies
View Related
May 14, 2013
I have a text field page item "Emp No" with a button "Find" in a page 10.
Soon after i enter any "Emp No" in the field and if i press "Find" button means, it will redirect to the another page 7, carrying the Empno that i have entered in the field in page 10 through URL and it will set that value to one hidden item P7_X which is in the page 7 and im using that hidden item to query data's in the page 7.
I need that search action to be done, not only by pressing the "Find" button but also pressing enter(soon after i entered a value in the "Emp No" field). Whether is it possible to perform that action once i press the enter button in keyboard.
View 14 Replies
View Related
Oct 31, 2013
How can I search the tree with a given string?I don't find any function like "search(...)".I want to find the tree nodes which include the given string.
View 5 Replies
View Related
Feb 15, 2013
My Interactive Report will run for a minute or for a long time like 5 to to 10 minutes depending upon given parameters to the report. Now I would like to cancel the report search when I made a mistake like searching on a value which willtake more time. how to achieve the same.
View 1 Replies
View Related
Dec 4, 2012
I have an interactive report which needs a horizontal scroll bar as it holds too much information for the screen, the problem is when a user scrolls the search bar is lost
i wanted to know if this could be changed by moving the interactive search (the whole action bar) to another form which would sit above the report.
View 2 Replies
View Related
Apr 16, 2013
I am using Oracle Apex 4.2 and theme 25. I want to add select list in IR search bar. I am able to add buttons but i am unable to add items.
View 4 Replies
View Related
Jun 12, 2013
I am using Apex 4.2, The Interactive report Search is not working properly, when i am entering complete date or time it is not showing any results...how to increase performance of the search...
View 5 Replies
View Related
Apr 25, 2013
I have a region where I have 3 textfields and a Submit button. Then, another report region where I have a query with the where condition that makes reference to the 3 texfields. This is:
Select * from ANYTABLE
where column1 = :P1_TEXTFIELD1
and column2 = :P1_TEXTFIELD2
and column3 = :P1_TEXTFIELD3
When I click the submit button, the report is reloaded (in fact, all the page) with all the conditions (in textfields) correctly. Now, what I need is that when I click the submit button, the filter appears in the screen; I mean, show the funnel with the filter conditions as if I made it since the search bar.
View 1 Replies
View Related
Oct 11, 2012
when receiving the output of a report subscription in Apex 4.1.1, the search Box is missing, only the Text string 'Suche:' is displayed.If i download the report as Email or html, the search box is there and usable.
Maybe i'm wrong, but this was not under Apex 4.0.2.
View 0 Replies
View Related
Jul 19, 2013
I have created a IR report and I set the default search column using the suggestion found in the thread URL....but how can I keep this default even after the research was done?Now it is resetted !
View 1 Replies
View Related
Aug 17, 2012
I have created a JQuery mobile template for APEX which at the moment is just returning data from my database in a reports region. Is it possible to include a search bar before the user sees any data so they can search for records in the database and return them to the results page I have already created?
If so what is the best approach with the mobile template?
View 0 Replies
View Related
Jul 25, 2013
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
View 4 Replies
View Related
Apr 29, 2011
Is full text search possible in oracle 10g express edition. If so, how is it possible. I browsed many places but couldn't find that.
View 1 Replies
View Related
May 19, 2010
I have this query:
select distinct event_number from events_total WHERE event_id = 16395493
minus
select distinct event_number from event_details_ford WHERE event_id = 16395493
result of which is :
6L2Z-7861693-AAC
6L2Z-7862187-CAC
i want to put this in dynamic sql where clause :
where event_number in ('6L2Z-7861693-AAC','6L2Z-7862187-CAC'). and if the result of the query is only one number, then where event_number in (6L2Z-7861693-AAC) result of the query can be NULL also. but i think i can use IF condition for "SELECT ..WHERE event_number in " query
so how can i put the results of query in one line, so that i can use it in where clause.
View 12 Replies
View Related
May 11, 2010
I have a block in the form which is based of a table as data source and so when i query on the form using a execute_query inbuilt statement is fired and all the records in the table behind is retrived and displayed. Also if i need to update any record i can do in on the screen and use commit_form so that all the changes go into the underlying table. Now my problem is when i retrieving my records i want to filter those records based on some conditions to be displayed in the form and not all records to be retrieved. Is it possible to do it if I am using the execute_query inbuilt and my block is based of a table?
View 8 Replies
View Related
Oct 26, 2010
I have a requirement like this, There is a temporary table with one number column. This column would be updated in between pages trigger. In the header I want to display the value from this temporary table on each page. I tried this by putting a frame and displaying the values, but it displays same value for all the column.
The table is properly getting updated in between pages trigger. I just want to know how to print the refreshed value in the header.
View 3 Replies
View Related
Mar 30, 2013
column sid format 'a5'
column serial# format 'a10'
column mins_running format 'a15'
column sql_text format 'a100'
set linesize 200
set pagesize 30
[Code]..
I am running this code, and the output shows multiple lines.
TRIM(S.SID) TRIM(S.SERIAL#) MINS_RUNNING SUBSTR(Q.SQL_TEXT,1,70)
---------------------------------------- ---------------------------------------- --------------- ----------------------------------------------------------------
700 46592 242.08 Select count(*) as count, case when count(*)>0 then 'FAIL' else
700 46592 242.08 'PASS' end as result
from (SELECT cv.code_value
FROM code_valu
[Code]...
Is there a way to wrap up the column for SQL_TEXT VARCHAR2(64) so that I can 1 row for the output?
View 14 Replies
View Related
May 13, 2011
is that datablock should have related to show the stacked which is hidden in content canvas
i have attached the stack.fmb
View 9 Replies
View Related
Jun 26, 2012
CREATE TABLE CURR_STS
(
LOB VARCHAR2(100 CHAR),
FP VARCHAR2(100 CHAR),
BRAND VARCHAR2(100 CHAR),
ITEM VARCHAR2(100 CHAR),
SUB_ITEM VARCHAR2(100 CHAR),
PART VARCHAR2(100 CHAR),
COST NUMBER
[code]...
ITEM not in CURR_STS table not to be displayed ( HERE SKU2) , but SUB_ITEM, PART coming under a ITEM if present in SAME ITEM in CURR_STS ( here SKU1 is common in both CURR_STS and PRIOR_STS) to be displayed. Trying to achieve this through OUTER join queries.
SELECT a.lob,a.sku,a.mod,a.part,a.cost curr_cost, b.cost prior_cost
FROM curr_sts a, prior_sts b
WHERE a.item=b.item(+) and a.sub_item=b.sub_item(+) and a.part=b.part(+);
View 3 Replies
View Related
Mar 4, 2013
We have integrated Oracle Access Manager 11gR1 with Oracle Apex 4.1. The OAM-Apex integration is working fine. Now we want an additional header variable to be passed from OAM to the Apex application. This new header variable will be user's sAMAccountName in Active Directory. OAM is integrated with AD and the AD users are successfully able to access the Apex applications.
The three header variables which are configure in OAM right now are:
Header variable name Value
1. OAM_REMOTE_USER $user.userid
2. OAM_REMOTE_USER_EMAIL $user.attr.mail
3. OAM_REMOTE_USER_GROUPS $user.groups
We need an additional header variable as mentioned below:
Header variable name: OAM_SAMACCOUNTNAME
Value: $user.attr.samaccountname
The new header variable was added in the OHS server's dads.conf file like shown below:
=========== dads.conf =============
...
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_GROUPS
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_EMAIL
PlsqlCGIEnvironmentList HTTP_OAM_SAMACCOUNTNAME
But we are not able to read the value of this attribute in the Apex application.On the Apex application, we have a text box which shows the value of this header variable. This textbox is attached with the following stored procedure call to fetch the header variable:
===================
begin
:P1_HEADER_VALUE := owa_util.get_cgi_env( 'HTTP_OAM_SAMACCOUNTNAME' );
end;
The textbox shows the correct value if HTTP_OAM_REMOTE_USER is passed to the get_cgi_env method but does not shows anything when HTTP_OAM_SAMACCOUNTNAME is passed to the same method. if I am missing some configuration to pass the HTTP_OAM_SAMACCOUNTNAME haeder variable from OAM to Apex.
View 1 Replies
View Related
Jan 24, 2013
I have multiple application set-up using session sharing within the workspace.Technically all works fine, however it does not play nice with user behaviour.
Example:
Users logs into APP_ID:100. Since he isn't authenticated yet, he provides user/pass and the APP_SESSION is authenticated.
Now if the user switches using to another application (using a link provided in application 100) he gets redirect to APP_ID:101:APP_SESSION all is fine.
The session is already authenticated, the application shares the session and the user gains access to app 101 without having to authenticate again. All's fine!
However users don't behave they way. Instead of using an easy link in the application. They will use their own bookmark or type in the url for app 101 manually. That way the next application is either called with f?p=101:1:[SOME OLD SESSIONID FROM BOOMARK] or f?p=101 (with no further page or session info) In both cases instead of using the already authenticated session apex spawns a new session, which of course isn't authenticated yet thus forcing the user to authenticate and come complaining they have to login again.
Similar behaviour problems exists when the user opens a browser and tries to open both applications in each in a tab next to each other.Both tabs fetch there own initial session id and start writing it to the same cookie each in turn invalidating the other tab's session.These can lead to some fanatic ping pong actions. Thus it's impossible to open 2 applications sharing session in the same browser.
Is there any remedy for these situations?Can apex be as smart as for instance first trying to resume the session stored in the cookie and only if that session is invalid, start a new session?
View 2 Replies
View Related
Apr 26, 2013
how to use checkbox item, and trying to get checked options values via application global arrays. So, this may be quite simple question, but I'm completely stuck here...
When I was looking through various threads and guides, I've encountered checkbox corresponding array names like "g_f01" - "g_f50". And so far i saw that these names are derived from item name in generated HTML code, for example:
<input type="checkbox" name="*f10*" value="3" />
And this one stands for array name "g_*f10*".However, when I tried to do the same thing - i receive item name which looks like "*p_v04*", and therefore, I can't figure out, which array name should I choose to adress it properly.
My generated HTML snippet:
<input type="checkbox" id="P6_ANSWER_0" name="*p_v04*" value="3"/>
View 2 Replies
View Related
Mar 23, 2013
i want to display a list of all users on a page those currently accessing or using the application. How do i accomplish this requirement?
View 1 Replies
View Related
Jul 5, 2013
APEX 4.0 Sometimes, I am getting the below error when I tried to logging into APEX workspace (after giving workspace name, User name and password), Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
ErrorERR-7621 Could not determine workspace for application (:) on application accept. I found some threads related to this but in different way not exactly when I am getting this error.
After 2 or 3 times, this error will not come and I can able to logging into workspace What is the cause for this issue??
View 1 Replies
View Related
Nov 4, 2013
Each time when I import an application into my workspace in local 10g XE using the APEX 4.2 Application Builder, I get the "ORA-02291, constraint wwv_flows_fk violated..". The application I whant to import was originally exported from [URL]. I found out, that it has to to with wwv_flow_application_install.get_workspace_id in the installation script, which obviously returns NULL and not my current workspace id as I suppose it should. I replaced wwv_flow_application_install.get_workspace_id by '<my worskspace id>' and then the import does work.
View 0 Replies
View Related
