ASM Diskgroup Creation Failed Using Two Node
Mar 19, 2012
A am new in RAC configuration.I configuring RAC with ASM diskgroup with the external redundency. So now i am facing problem to mount the ASM diskgroup. I am giving the the RAC configuration description below.
1. using two node rac1 and rac2
2. asm disk configuration 3 drive
/dev/raw/raw1
/dev/raw/raw2
/dev/raw/raw3
on both node
3. and i am using vmware to configure the both node asmdisk group
after configuring the os level and oracle clustring , i run dbca to configure asm disk group..so in the create disk screen i have found my previous create 3 disks
/dev/raw/raw1
/dev/raw/raw2
/dev/raw/raw3
so first two disks
/dev/raw/raw1
/dev/raw/raw2
i named it "dg1" then press ok , when i pressed ok a warring is appear that is "could not mount the diskgroup on remote node on rac2 using the connection service rac2:1521:+ASM2. Ensure that the listener is running on this node and the asm instance is registred to the listener. Receive the following error:
ORA-15032 : not all alterations performed
ORA-15063 : ASM discovered insufficient number of disk for diskgroup "DG1"
as the same way i create another diskgroup "fg" for flash recovery area using disk /dev/raw/raw3
so after creating the two diskgroup i saw the two diskgroup is appere in the "diskgroup appere screen" an saw that only one diskgroup is mounted but not second node i.e. rac2 diskgroup is not mounted . What should i do no .
View 2 Replies
ADVERTISEMENT
Apr 12, 2011
i am trying to create the ASM diskgroup means it's giving the below error.
[root@racdb3 ~]# /etc/init.d/oracleasm createdisk VOL1 /dev/sdb6
Marking disk "VOL1" as an ASM disk: [FAILED]
View 4 Replies
View Related
Mar 27, 2013
My cluster have two node.Data diskgroup uses normal redundancy.Priamry disks are located in one storage.Fail group disks are located in another storage.When we close the failgroup disks' storage the 2nd instance restart.After automatically restarted everything goes well.I want to know why does the 2nd instance restart?Is it normal?
View 2 Replies
View Related
Nov 30, 2004
I am cloning a database from a cold backup in archivelog mode using the control file script but failes:
STARTUP NOMOUNT
CREATE CONTROLFILE DATABASE PROD NORESETLOGS ARCHIVELOG
:
:
:
ALTER DATABASE OPEN;
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\ORADATA\PROD\TEMP01.DBF'
[code]...
Tried again with RESETLOGS:
STARTUP NOMOUNT
CREATE CONTROLFILE DATABASE PROD RESETLOGS ARCHIVELOG
:
ALTER DATABASE OPEN RESETLOGS
*
ERROR at line 1:
ORA-00344: unable to re-create online log 'D:\ORADATA\PROD\REDO01B.ORA'
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.
View 3 Replies
View Related
Sep 28, 2011
What could be the reason for Such Errors.?OCR Integrity was Successful on one node and on the cloned node it was failed.
View 8 Replies
View Related
Nov 1, 2010
I am trying to install ORACLE 11gR2 RAC on CentOS 5.5 .
when run root.sh on first node. I am gettign 2/3 failed command lines but the end went successful
=======================================================================
ohasd is starting
ADVM/ACFS is not supported on centos-release-5-5.el5.centos
...
add nodeapps -n perflabhp03 -A perflabhp03-vip/255.255.254.0/eth0 on node=perflabhp03 ... failed
...
PRCR-1001 : Resource ora.net1.network does not exist
add scan=perflab-cluster-scan ... failed,
Configure Oracle Grid Infrastructure for a Cluster ... failed
...
'UpdateNodeList' was successful.
=========================================================================
Because of this output, when see the ./crsctl stat res -t , it showing LISTENER offline for perflahp03, and I can not see any status line for "perflabhp03-vip " and "Scan-listener".
Do I need to reinstall the entire cluster setup because of VIP issue?
View 1 Replies
View Related
Jan 26, 2013
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
[code]..
View 2 Replies
View Related
Jun 15, 2012
current environment
Oracle VM 2 Node RAC cluster
Oracle 11G 11.2.0.3.0
Oracle 11g rel 2 GI
on current 2 node cluster we have GI and RAC db configured Nodes: vmorarac1,vmorarac2
we shutdown vmorarac1 to clone it to vmorarac5
on new node I have changed the hostname to vmorarac5 In /etc/sysconfig/network-scripts/ifcfg-eth0 change ip to new ip and same for /etc/sysconfig/network-scripts/ifcfg-eth1 152.144.199.210,152.144.199.211
mad echanges to /etc/hosts on vmorarac1/2 for 2 new IP address assigned to vmorarac5
152.144.199.171 vmorarac1.pbi.global.pvt vmorarac1
192.168.2.30 vmorarac1-priv.pbi.global.pvt vmorarac1-priv
152.144.199.184 vmorarac1-vip.pbi.global.pvt vmorarac1-vip
[Code]....
Query is is that all ok to reboot the new node to reflect changes as below and change the hostname to vmorarac2
152.144.199.210 vmorarac2.pbi.global.pvt vmorarac2
192.168.2.32 vmorarac2-priv.pbi.global.pvt vmorarac2-priv
152.144.199.211 vmorarac2-vip.pbi.global.pvt vmorarac2-vip
hostname change in /etc/sysconfig/network
On new node vmorarac5, there is alreay software for RAC DB and GUI cloned from vmorarac1
addnode.sh is used to add existing node, but as part of pre-requisite configuratoin is there any config step missing
View 3 Replies
View Related
Aug 16, 2013
I believe, in a multiple RAC Physical Standby nodes only one node applies the archivelogs to the standby database. How you can find which node is the APPLY NODE using a SQL query?
I know you can veiw this information by querying the standby configuration using DGMGRL but how would you find out this information from a remote client using SQLPlus/PLSQL?
View 2 Replies
View Related
Jan 24, 2011
We have oracle database 10g(10.2.0.4) running on AIX 5.1. we have installed 2-node RAC on another server AIX 6.1 . Now we want to migrate our single node database to new 2-node rac environment. how we can move/migrate/cluster-aware our single node database to 2-node rac?
View 3 Replies
View Related
Jul 9, 2012
During ASM Disk Groups creation after the ASM instance creation, receive the following error: Disk Group ORAASMGROUP2 already exists. Cannot be created again
The Grid infrastructure was deinstall one time and still the same issue.
View 4 Replies
View Related
Jul 18, 2013
I am installing Oracle 10g Clusterware in RHEL 5 Server. When i run root.sh in the second node the last step Running vipca(silent) for configuring nodeapps failed. Then i run VIPCA manually in second node and configured vip configuration successfully,but when i checked the post-checks for cluster services the Checking existence of VIP node application,Checking existence of ONS node application and Checking existence of GSD node application in second node failed. I am able to ping both the servers one another with vip name successfully and the CSS,CRS and EVM appears healthy in both nodes. 1. Does the vip configuration is proper? If no what is causing this error and how to rectify it? Find the output below
[root@Rhel52 bin]# ./crsctl check crsCSS appears healthyCRS appears healthyEVM appears healthy[root@Rhel52 bin]#[root@Rhel52 bin]# clear[root@Rhel52 bin]#[root@Rhel52 bin]# ./crs_stat -tName Type Target State Host------------------------------------------------------------------------------------ora.rhel5.gsd application ONLINE ONLINE rhel5ora.rhel5.ons application ONLINE ONLINE rhel5ora.rhel5.vip application ONLINE ONLINE rhel5ora.rhel52.gsd application ONLINE ONLINE rhel52ora.rhel52.ons application ONLINE ONLINE rhel52ora.rhel52.vip application ONLINE ONLINE rhel52 [root@Rhel52 bin]#./runcluvfy.sh stage -post crsinst -n
[code]....
View 0 Replies
View Related
Sep 13, 2012
I would like get more details about single node RAC.. What is single Node RAC?..
1). just configure only one server instead of two node... same RAC installation.. cluster installation and shared disk configuration in single server itself.. in future we can add node to this ...
2). in 11gR2 having new feature Single Node RAC.. Multiple instances running on same node and configure using Cluster...
is there any advantage using single node rac(other than online upgrade to full RAC).
View 3 Replies
View Related
Feb 3, 2012
I'm trying to add the third node to my existing two node cluster. In fact i succeded adding the node but i have the following problem:
-when i start node 1 and 2, everything is ok, but on node 3 startup one of the other nodes fails
-this happens in any combination: start 1 and 3, everything is ok. when i start node 2, node 3 fails
The asm configuration (disks, permissions, etc) is the same on all three nodes.find below the asm and crsd log details from the failure time:
alert_ASM.log
NOTE: enlarging ACD for group 1/0x124851d1 (DATA)
WARNNING: cache read a corrupted block group=DATA dsk=4 blk=1 from disk 4
+NOTE: a corrupted block from group DATA was dumped to /u01/app/oracle/diag/asm/+asm/+ASM3/trace/+ASM3_rbal_4109.trc+
WARNNING: cache read(retry) a corrupted block group=DATA dsk=4 blk=1 from disk 4
[code]...
View 3 Replies
View Related
Jan 21, 2011
How can we check the I/O statistics on a ASM diskgroup?
Do we have any command which can be run @ sqlplus prompt after logging into the asm instance?
What steps can we take to increase the Read speed and the write speed on the ASM diskgroup.
View 1 Replies
View Related
Sep 8, 2011
The ASM Diskgroup DATA is dismounted automatically. I can mount the DATA Diskgroup again, but again is dismounted.
The RDBMS instance (XA21) is started along 5 minutes and then is shutdown, until I mount the diskgroup with problems, again
The Oracle version installed is 10g Standard Edition with ASM option, in Windows 2003 Server Standard Edition.
The alert log XA21 (RDBMS) instance, said:
Errors in file e:\cots\oracle\product\10.2.0\admin\xa21\bdump\xa21_lgwr_3108.trc:
ORA-00345: redo log write error block 12257 count 2
ORA-00312: online log 1 thread 1: '+DATA/xa21/onlinelog/group_1.258.681415491'
ORA-15078: ASM diskgroup was forcibly dismounted
ORA-00345: redo log write error block 12257 count 2
ORA-00312: online log 1 thread 1: '+DATA/xa21/onlinelog/group_1.259.681415495'
ORA-15078: ASM diskgroup was forcibly dismounted
ORA-00202: control file: '+DATA/xa21/control01.ctl'
ORA-17503: ksfdopn:2 Failed to open file +DATA/xa21/control01.ctl
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
The alert log +ASM instance, said:
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
I tried to resolve a physical error in file systems, with CHKDSK tool, unsuccessfully.
What can I do, using Oracle Tools?
Attached File(s)
alert_xa21.zip ( 6.4K )
Number of downloads: 0
alert__asm.zip ( 2.87K )
Number of downloads: 0
View 2 Replies
View Related
Oct 9, 2012
My exadata quarter rack machine has two asm diskgroups, DATA1 with 5TB and RECO with 3TB. I'd like to resize RECO to 1TB and DATA1 to 7TB.
I know ALTER DISKGROUP RESIZE command, but my question is about resize RECO volume from 3 to 1 TB: is it supported by Oracle?? Let me know risks /issues with this resize?
View 2 Replies
View Related
Jun 7, 2011
Resize or add disk in ASM.
- The storage has partitions like:
- And now, the size of ASM disk was full
Because I've not ever done for adding disk to diskgroup.
Step 1- Format the storage, add partitions (I will create 4 partitions of 120gb, 1 partitions 60gb, 1 partitions 27gb).
Step 2- Add the rawdevice in /etc/sysconfig/rawdevices.In the picture here, I'll not just add rawdevice in /etc/sysconfig/rawdevices. So I'll do:
add lines in /etc/sysconfig/rawdevices
/dev/raw/raw7 /dev/cciss/c0d1p9
/dev/raw/raw8 /dev/cciss/c0d1p10
/dev/raw/raw9 /dev/cciss/c0d1p11
/dev/raw/raw10 /dev/cciss/c0d1p12
[code]....
how to do continue after step 5.
View 5 Replies
View Related
Sep 19, 2012
I've been ASM quite a while. I've two diskgroups extdg and nordg which are of external and normal redundancy respectively. Total diskgroup size is 9G, usuable space came down to 3mb when i tried to resize it to itz maximum. the value under usable column shows the same.
FYI... i've totally three disks in nordg, two in one failgroup and one in another.The disk sized equally 3g each.
Quote:
NAME TOTAL_MB FREE_MB USABLE_FILE_MB
------------------------------ ---------- ---------- --------------
EXTDG 2047 1995 1995
NORDG 9201 3073 3
The command i used to resize all disk to their max is Quote:SQL> alter diskgroup nordg resize all size 3067M;
View 3 Replies
View Related
Aug 31, 2011
I have an Oracle database 11.1.0.6 with ASM storage.
SQL> select * from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Solaris: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
There is a disk group named +FRA which has only 1 disk (call it disk 0 for later references).
+FRA disk group is in type of EXTERNAL redundancy
I'd like to add another disk to +FRA disk group and copy all files stored in disk 0 to the new disk (call it disk 1 for ex.), then take off disk 0 (not use for +FRA disk group any more).
Expected result: there is only one disk 1 left in the +FRA disk group, with all the data from disk 0 and keep their original file names
View 5 Replies
View Related
Sep 25, 2013
Version: 11.2.0.3Platform : Solaris 10
One of the Hitachi support guy has suggested to create a separate disk group for Online redo logs. His rationale was that ORLs was write only files and it would be better to put in a separate disk group.
View 6 Replies
View Related
Jul 1, 2012
What is correct way to move the default oracle spfile to ASM diskgroup so i can successfully bring up the instance . After bring up the instance , it should point to ASM diskgroup. My oracle database 11.2.0.3 is siting on sun solaris 64 Bit.
View 8 Replies
View Related
Oct 4, 2012
We are implementing a 2 node RAC configuration with ASM on vmware and openfiler on LINUX RHEL 6.2. We started our installation with grid infrastructure. While executing root.sh on node 1 it gives error diskgroup cannot be mounted and no alterntions perfomed as below.
+[main] [ 2012-10-04 05:38:33.150 PDT ] [UsmcaLogger.logException:173] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:mountDiskGroups+
+[main] [ 2012-10-04 05:38:33.151 PDT ] [UsmcaLogger.logException:174] ORA-15032: not all alterations performed+
ORA-15017: diskgroup "CRS" cannot be mounted
[code]...
View 1 Replies
View Related
Mar 3, 2012
you have given 500gb of harddisk. how will u implement the size or how to assing the size for disks in the diskgroup.give me the best practice that is used in production
View 1 Replies
View Related
Nov 10, 2013
I added a new disk to a diskgroup. It starts to rebalance. However, I plan to drop the diskgroup anyhow and recreate it since I want to restore a database to it.(I shouldn't have added the new disk beforehand, my mistake) So now it's rebalancing and may take some hours.Can I drop the diskgroup now?I think there is no way to stop the rebalance?
View 2 Replies
View Related
Mar 1, 2011
I've been using ASM for a few years now and have always installed a new system with 3 diskgroups
+DATA - for datafiles, control files, redo logs
+FRA - for achive logs, flash recovery. RMAN backup
Those I guess are the standards, but I've always created an extra (very small) diskgroup, called +ONLINE where I keep multiplexed copies of the redo logs and control files.
My reasoning behind this is that if there are any issues with the +DATA diskgroup, the redo logs and control files can still be accessed.
In the olden days (all those 5 years ago!), on local storage, this was important, but is it still important now? With all the striping and mirroring going on (both at ASM and RAID level), am I just being overtly paranoid? Does this additional +ONLINE diskgroup actually hamper performance? (with dual write overheads that are not necessary)
View 4 Replies
View Related
Oct 7, 2013
When I try to start the database or ASM instance its showing the following error.
SQL> connect sys as sysdba
Enter password:
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+FLASH_RECOVERY_AREA/XXXXX/spfileXXXXX.ora'
ORA-17503: ksfdopn:2 Failed to open file +FLASH_RECOVERY_AREA/XXXXX/spfileXXXXXX.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
SQL>
when am trying to view the data's by below Sql its show name as null for FLASH_RECOVERY_AREA. so I couldn't even set compatible ATTRIBUTE
SQL> select NAME , COMPATIBILITY, DATABASE_COMPATIBILITY from V$ASM_DISKGROUP;
NAME COMPATIBILITY DATABASE_COMPATIBILITY
------------- ---------------------- -----------------------------------
RUBIKON_DATA 10.1.0.0.0 10.1.0.0.0
SQL> show parameter asm_disk
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
asm_diskgroups string RUBIKON_DATA, FLASH_RECOVERY_A
REA
asm_diskstring string /dev/mapper/Rubikon_data1, /dev/mapper/Rubikon_data2, /dev/mapper/Rubikon_fb
because of name is null mount mode as CLOSED and HEADER_STATUS as INCOMPATIBLE.
SQL> select name, mount_status, header_status,mode_status,state, path from v$asm_disk ;
NAME MOUNT_S HEADER_STATU MODE_ST STATE PATH
-------------- ------- ------------ ------- -------- -------------------------
CLOSED INCOMPATIBLE ONLINE NORMAL /dev/mapper/Rubikon_fb
RUBIKON_DATA_0000 CACHED MEMBER ONLINE NORMAL /dev/mapper/Rubikon_data1
RUBIKON_DATA_0001 CACHED MEMBER ONLINE NORMAL /dev/mapper/Rubikon_data2
View 1 Replies
View Related
Sep 16, 2011
I'm new on 11g, due to my limit storage with mounted internal disk, so I think, may I can store archivelog in ASM without FRA? However, I did not find any document to verify.
View 5 Replies
View Related
Jul 4, 2012
I want to configure row device to usable for creating new asm diskgroup.we are using ASM. Steps to configure that row device to available for creating new diskgroup.
View 2 Replies
View Related
Oct 19, 2012
Just started to learn oracle DBA. I am creating database manually.. I am facing following errors
I executed catproc.sql script it was running suddenlt oracle throwd following error.
CODEPL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Package body created.
No errors.
Package body created.
BEGIN
*
ERROR at line 1:
ORA-01552: cannot use system rollback segment for non-system tablespace 'TEMP'
ORA-06512: at "SYS.DBMS_STATS", line 13210
ORA-06512: at "SYS.DBMS_STATS", line 13517
[code]...
Script detail's
CODECREATE DATABASE drprod
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/drprod/redo01.log') SIZE 100M , GROUP 2 ('/u01/app/oracle/oradata/drprod/redo02.log') SIZE 100M
MAXLOGFILES 5
MAXLOGMEMBERS 5
[code]...
View 14 Replies
View Related