I have a small question is it possible to find the details of a user who modified the structure of a table, including what command he ran to change the structure of the table?
View 2 Replies
a table structure is modified every now and then because of which the few packages get uncompiled. is there any way to monitor which user has changed table structure.
View 2 Replies View Relatedi want to find the name of user who make changes in the table structure or create any index or constraint or unique key or alter the column? Is there any way to find in Oracle. in which table what change has been done as well?
following Output needed
userid, username, schemaname, schemachangetime, "what_change_has_been_made", IP address or Computername
I was looking for application column name corresponding to "Draft Invoice Number" ra_interface_lines_all table.
I tried the below.
/* Get descriptive_flexfield_name for the application table name*/
SELECT *
FROM FND_DESCRIPTIVE_FLEXS_VL
WHERE application_id = 222
AND APPLICATION_TABLE_NAME=upper('ra_interface_lines_all');
/* Get the application column name and end user column name*/
SELECT *
FROM FND_DESCR_FLEX_COLUMN_USAGES
WHERE application_id = 222
AND descriptive_flexfield_name = 'RA_INTERFACE_LINES';
There are many DESCRIPTIVE_FLEX_CONTEXT_CODEs obtained. I could finally trace out that draft invoice number corresponds to INTERFACE_LINE_ATTRIBUTE2. How can I know what DESCRIPTIVE_FLEX_CONTEXT_CODE should I look for?
I want to build a single query to fetch the application column name and flex field name for a specific table .
The requirement is to find the last date when either ATTRIB1 or ATTRIB2 were modified for each ID. There are many other columns in the table, but I'm not interested in other columns.
Test Case
SET LINES 100
SET PAGES 100
DROP TABLE test_log
/
CREATE TABLE test_log
[code]....
Expected Output
ID LAST_CHANGE_DATE
---------- --------------------
11 02-SEP-2012 10:58:32
35 05-AUG-2012 10:58:32
I have written the below query, to get the required output.
SELECT MAX(i_date) last_change_date
FROM
(
SELECT seq,id, attrib1, attrib2, i_date,
row_number() OVER (PARTITION BY attrib1 ORDER BY i_date) rn1,
row_number() OVER (PARTITION BY attrib2 ORDER BY i_date) rn2
[code]....
how to find who modified a package code at last? I can only find the latest modified date with USER_OBJECTS.
View 3 Replies View RelatedI have a user in my oracle database, I would like to know details such as, how many times and by using which tools same user has got logged for past one week.
How do I do that. I have sql which shows the current session either he is logged in, if so then which application or not logged in. But I required the information for past one week How do I get those details.
I want to save ip address, os username, terminal information at the time of record insertion/updation therefore I am using sys_context function but it gives me error at the time of form compilation.
ERROR:
ORA-00600: internal error code, arguments: [17069],[134386616],[],[],[],[],[],[]
My user has already DBA privilege.
How can I find out a user session/connection details like ( his last connection time, his activity etc)
Here is the issue, a old dba_user_id who physically no longer exists is not removed from the database. At some time, a session is opened under his user_id and some activity runs and closes the session. So, checked scheduled jobs under him and disabled them. But not sure whether the scheduled jobs are creating a session under his user_id or some thing else.
I checked in v$session, but since I am not sure at what time his session opens, so I am not able to get his session details.
We have a scenario where we need to get the details of quota details on different tablespaces for a user. Is there any way to get this information directly using some views etc.
I tried with following option.. but not found in this... i think we can get this TOAD some other tools. but i never tried using SQL directly...
SELECT dbms_metadata.get_ddl('USER','SCOTT') FROM dual;
I have a table in that i have some columns along with that four columns to capture the user details. but these details must be captured Programmatically.like whenever a user insert or update or delete his credentials must be captured in these columns. but i am not figuring out in which trigger i have to write and how.
View 19 Replies View RelatedHow can i find the last user analyzed particular table?
I can able to find last analyzed date, but can't able find the which user has done it.
I want to find the constraint name from User_Constraints table using the following query:
Select * From User_Constraints Where Table_Name='CHARGECODE' and Constraint_Type='C' And Search_Condition = '"PERCENTAGE" IS NOT NULL';
Then it shows "ORA-00997: illegal use of LONG datatype" error.
Is there any way to compare with long type value.
Provide me a query to find the last modified timestamp of all the tables present in a schema?
View 5 Replies View RelatedI am struck in a requirement to show the organization structure in a Top Down Organizational structure.
Is there any way we can make the well structured report OR form?
I use oracle 9i. After doing execution ,process, how can I know which table in the oracle have been update/modify?
View 18 Replies View Relatedwhat command is used to create a table by copying the structure of another table including constraints ?
View 2 Replies View Related--this for txn details
CREATE TABLE txn_det(
txnid NUMBER PRIMARY KEY,
amount NUMBER,
status varchar2(50),
cust_id NUMBER);
----this for customer details
CREATE TABLE cust_det(
cust_id NUMBER PRIMARY KEY,
cust_name VARCHAR2(50),
cust_acc number(15));
--data to insert for customer table
INSERT INTO cust_det VALUES(101,'Miller','12345');
INSERT INTO cust_det VALUES(201,'Scott','45678');
----data to insert for txn table
INSERT INTO txn_det VALUES('tx0045',123.00,'success',101);
INSERT INTO txn_det VALUES('tx0046',4512.50,'success',101);
insert into txn_det values('tx0049',78.12,'success',101);
INSERT INTO txn_det VALUES('tx0055',123.12,'success',201);
Now THE problem IS cust_det TABLE's cust_id coulmn may contain duplicate.So I thought OF adding THE txn_id COLUMN TO THE cust_det table but I know that encourgaes redundancy.
How to take table structure in oracle? Actually I got it through this command "SELECT dbms_metadata.get_ddl(a.object_type,a.object_name) FROM user_objects a where object_type != 'PACKAGE BODY'"
any other way to get it? I need like table name field name datatype
Is there any query to find the dependent object details for any object. Like if mview is built on a table, then i should be able to find the table name with out checking code of the mview. similar way for view and functions or procedures etc...
View 5 Replies View Relatedcreate table my_rows
(
my_envvarchar2(100),
anumber(2),
bnumber(2)
)
/
insert into my_rows values ('A', 10, 20);
insert into my_rows values ('A', 10, 20);
insert into my_rows values ('A', 10, 20);
insert into my_rows values ('A', 10, 20);
insert into my_rows values ('A', 10, 20);
insert into my_rows values ('A', 10, 20);
insert into my_rows values ('A', 10, 20);
insert into my_rows values ('A', 10, 20);
[code]....
The first row means that the value 10 represents 40% in the couple (10,20). Meaning if I have 100 rows with the couple (10,20), 40 rows will be marked with the value 10 and 60 will be marked with the value 20. To do this, I used to create a temporary table with the same structure as the my_rows table with a new column "the_value" and I used to update this new column wth a PL/SQL for loop. But I think it is doable in a signle SQL.
i would like to view all table statructure of a schema in a file. i need to take print out of it for one analysys.
i did like this
exp user/pwd file=dumpfile.dmp full=y rows=n log=logfilename.log
imp user/pwd file=dumpfile.dmp full=y indexfile=indexfile.sql logfile=logfilename.log
but
its look like this i could not format
REM CREATE TABLE "SYSTEM"."DEF$_AQCALL" ("Q_NAME" VARCHAR2(30), "MSGID"
REM RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER,
REM "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO"
REM TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN"
REM NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" NUMBER,
[Code] ..........
I am receiving two large export files from a vendor, so I have no control over the contents. I need to import these into our database. The two export files are very similar, except the one has slightly differenet columns in it. So, export file 1 may have a table:
COLUMN_A
COLUMN_B
COLUMN_C
The second file may have:
COLUMN_A
COLUMN_B
COLUMN_D
At the destination, I have a table that has:
COLUMN_A
COLUMN_B
COLUMN_C
COLUMN_D
Is there a parameter that would let me interchangably import either (or both) files into this destination table? This is my first attempt at data pump - but I know using import this has caused me issues. Not sure if the same limitations exist? Will the missing columns cause it to fail?
my working is relating with PUMP of oracle.
I would like to use command, for ex:
expdp hr/hr DIRECTORY=dpump_dir1 DUMPFILE=expdat.dmp COMPRESSION=ALL LOGFILE=export.log SCHEMAS=hr
But some tables in Schema HR, I don't want to export data, just only need table structure.
we have daily partitioned table, and for backup we are using data pump (expdp). we policy to drop partition after backup (archiving).
we have archived dump files for 1year, few days back developer made changes with table structure they added one new column to table.
Now we are unable to restore old partitions is there a way to restore partition if new column added / dropped from currect table.
know the process of exporting only the table structure of a Database without the actual content of it.
Note:: I don't know how many tables are present in the DB.
create trigger on certain column for table structure.
SQL> desc MXMS_BF_TXN_DTL_T
Name Null? Type
----------------------------------------- -------- ----------------------------
DOC_NO NOT NULL VARCHAR2(200)
SEQ_NO NOT NULL NUMBER(24)
GL_CODE VARCHAR2(200)
TXN_NATURE VARCHAR2(200)
TXN_TYPE_CODE VARCHAR2(200)
[code].....
I need to collect new and old data whenever update statement fire on DOC_NO,POLICY_KEY,CRT_USER column.i have created only audit table for the above as below structure .
Name Null? Type
----------------------------------------- -------- ----------------------------
TIMESTAMP DATE
WHO VARCHAR2(30)
CNAME VARCHAR2(30)
OLD VARCHAR2(2000)
NEW VARCHAR2(2000)
Description:- TIMESTAMP is for when the modification happen.
WHO is for username
CNAME is for column which is modified
OLD is for old value for the modified column
New os for new value for the modified column
I have a requirement to be coded like this:
A function to return pl/sql table(cant use ref cursor) whose columns varies every time it runs i.e,
means
type pl_tab_type is object(col1 varchar2(1000), col2 varchar2(1000))
type pl_tab is table of pl_tab_type
func f return pl_tab
as
...
end;
note : pl_tab_type will vary for each run of function f
i.e.,for example, pl_tab_type can be changed to as follows:
type pl_tab_type is object(col1 varchar2(1000), col2 varchar2(1000),col3 varchar2(1000))
how to return pl/sql table of dynamic type from func,
when the tables are updated, the following detals must be correct to ensure that the links in the affected tables are in place.
PLUPDATE_NEW(PLUP_SAVE_SEQ field value) must be the same with PLUPDATE_BENEF_NEW (PLUP_NEW_BENEF_SAVE_SEQ field value)
PLUPDATE_OLD(PLUP_SAVE_SEQ field value) must be the same with PLUPDATE_BENEF_OLD (PLUP_OLD_BENEF_SAVE_SEQ field value)?
[Code]....
i tried this code, what should i do in the link for this tables?
In details table i am having loc is column in which data is like this(Jones,180),(US,host name),(job, company),(id,0122)
output should be it should take only first value from ().
