Summing Column - Adding Values Of Attribute
Apr 25, 2013
i have 2 data block (maintenance & maintenanceparts) in one form and i will like to add the values of the attribute "LineCost" in the maintenanceparts datablock and put the sum into 'Totalcost' attribute in the maintenance datablock.
I tried use the code
"begin
select sum(maintenanceparts.LineCost)into :maintenance.totalcost
from MaintenanceParts;
end;"
But it ended up adding all the records that was save in that attribute and putting it in totalcost. I am new to oracle
View 1 Replies
ADVERTISEMENT
Jun 28, 2012
I'm trying to update a number field on an apex page by summing up the values of multiple page items. I've tried to follow this tutorial
[URL]........
especially the "Create a Set Value Dynamic Action Using PL/SQL" part.
In the tutorial example they return an page item value P3_SAL multiplied by a multiplier they've determined by another page item's case. What I want to do is much simpler in that I just want to add up multiple page item values and then display them in a number field at the bottom of the page.
so the code I tried to use based on the tutorial is in the tab: Home >Application Builder>Application 103>Page 3>Edit Dynamic Action>Create / Edit Action
Set Type: PL/SQL Function Body
PL/SQL Function Body:
BEGIN
return :P3_ITEM1+P3_ITEM2+P3_ITEM3;
END;
Page Items to Submit: P3_ITEM1,P3_ITEM2,P3_ITEM3
But it gives me an error that I need to declare the identifiers, yet it works if I only use one item and I can perform any arithmetic.
i.e.
BEGIN
return :P3_ITEM1+1000;
END;
View 2 Replies
View Related
Jun 23, 2011
Is it possible to replace datatype of column of one table with another table's column datatype using %type like below
SQL>create table test1 (v1 varchar2(10));
SQL>create table test2 (v1 test1.v1%type);
View 3 Replies
View Related
Jan 19, 2011
I have a table with zip codes and their plus four values. For ex: zip code of 10000, which has corresponding plus four values of 001, 002, 003, and 008, 009, 010. The issue is just that--a zip code can have sequential plus four values, and then it will skip several potential plus four values, and then start again. I would like to assign a low plus 4 value and high plus four value to a zip code, keeping in mind that the plus four values are not always sequential. So, it would be similar to this:
zip plus4 low plus4 high
10000 001 003
10000 008 010
View 2 Replies
View Related
Mar 6, 2009
column name: extra_hour
datatype: varchar2(5)
extra_hour
----------
01:30
01:30
00:00
02:45
and so on...
Problem: I want to add up all the given value and display it in a select statment, that is the output should be:
Output:
XXXXXX
----------
05:45
View 4 Replies
View Related
Apr 4, 2011
I want to have sum of Time Stamp Values in a Table. i.e. Group by Query
example : Select Name, Sum(Timestamp column) from Emp group by name;
OR
I have Time values in character column of a table. i.e. Table TT column t1 char(5) values '03:02'
Above mentioned values in more than one line, i want to get the sum of all the values and it should be a time value.
View 7 Replies
View Related
Aug 21, 2007
How do I make a select statement which will add up numbers from different columns or add up sums from different columns?
View 1 Replies
View Related
Jul 11, 2007
how do I add a column to an existing table which when rows are added to the table this column will have the same default value?
alter table thetable add (new_column_name varchar2(100) default bbubu);
View 1 Replies
View Related
Mar 31, 2010
I've been trying to write some code to add a column if it does not exist as the code will be run numerous times and will be parameterized in other software to run across multiple tables.
Here is what I have made so far:
DECLARE
COLEXISTS integer;
vCmdStr varchar2(4000);
[Code]....
I can't figure out where the invalid character is.
View 3 Replies
View Related
Aug 7, 2012
I had created a table which have 100s' of entries in it.
create table reg_user
(
USERNAME VARCHAR2(50),
PASSWORD VARCHAR2(20)
)
***
[Code]..
1. In this table, how to update the Nth row, how can I do it
2. Now I need to add USERID in this table,which will get value from 1 to max no. of rows. I do not want to drop the table and again re create it adding USERID or update each row manually. Is there any other way to add USERID and have IDs from 1 to max IDs.
View 30 Replies
View Related
Aug 12, 2013
I want to add column to table which has huge amount of data and fill with data from another table. What is the best way to do it? Is it faster to use CTAS instead of ALTER TABLE ADD COLUMN?
View 2 Replies
View Related
Jul 8, 2010
I want to add some new columns in an existing table that has over 10 millions rows, but not at the end of existing columns, my requirement is such i want new columns between existing existing columns. Is it possible.....
View 16 Replies
View Related
Sep 6, 2010
below query.
1) How to add a new column to the existing table's particular position, instead of atlast.
2) I created a table without mentioned the datatype size as below Create table dummy (name char, age number). Then what is the default size will be allocated for those column's?
View 3 Replies
View Related
May 15, 2012
we received a design advise to add columns to track the update and delete done on each row in our tables:
- DELETED_DATE_TIME
- DELETED_BY
- UPDATE_DATE_TIME
- UPDATED_BY
In our architecture, the application can only access functions/procedures to access/modify data. Each function logs the action, the executed sql statement, oracle error, user terminal, and the user into a unified log table by using v$ tables to create a general log function that is called after execution or error.
The only advantage is that it will be easier to know the delete and last update information faster versus space and design modification.
View 1 Replies
View Related
Dec 23, 2010
My scenario is to insert values into 'out' column by comparing 's' and 'IP' columns of temp table.The exact situation is at first need to go to ip column,take a value and then go to source column and check for the same value of ip which is taken previously.Then after corresponding ip of that source column should be inserted back in previous source column.
The situation is marked clearly in file which i am attaching with '--' comments at respective places.I am also pasting the code which i tried out,unfortunately it is giving error as exact fetch returns more than requested number of rows since there are duplicates in the table.I tried it using nested for loops.Also implemented using rowid,but it didnt work.
fixing the errors or if there is any new logic that can be implemented.
DECLARE
i_e NUMBER(10);
BEGIN
FOR cur_1 IN(SELECT IP from temp where IP IS NOT NULL)
LOOP
FOR cur_2 IN(SELECT IP from temp where s=cur_1.IP)
[Code]...
View 9 Replies
View Related
Jul 16, 2012
Oracle 11g r2, APEX 4.1.1.00.23.
I have some classic reports.
I go to Report Attributes, then I click Add Column Link in the "Tasks" right menu, it adds me a column link, I just add some text for the link and a page to go to. Then I run the report and I get :
report error: ORA-01403: no data foundTested with several classic reports on multiple pages.
Debug mode shows me :
0.43816 0.00240 ...Execute Statement: select distinct [...] order by 3,11 ,4
0.44056 0.00162 print column headings
0.44218 0.04816 rows loop: 25 row(s)
0.49037 0.00141 report error: ORA-01403: aucune donnée trouvée
0.49175 0.00078 Computation point: After Box BodyWhen I run the query in my favorite tool, I get expected results.
Did I missed something ?
View 9 Replies
View Related
Jul 25, 2013
From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?
View 2 Replies
View Related
Apr 10, 2013
On my APEX page i have region which has sql query as source and it displays as HTML table the query result to the user.
I want to display addinonal column with a hyperlink inside, and that hyperlink would have CGI/URL-parameters which contains the other values of the HTML row.
So, let's say my APEX region queryes columns as "select c1, c2, c3, c4 ..." and displays out values "V1, V2, V3, V4" then i want to have addional output column with such hyperlink:
a href="f?p=100:7:13467554876288::NO::c1,c2,c3,c4:v1,v2,v3,v4">My link column with CGI-parameters</aHow can i create such hyperlink?
The overall idea is that the link would forward to a page which loads those values "v1,v2,v3,v4" into form fields and user can proceed from there.
---
"Application Express 4.2.1.00.08"
View 2 Replies
View Related
Jun 19, 2012
I want to pass multiple column values of a row in an interactive report page to hidden items in another page through column link. And I did it successfully. However, I found I need to pass more than 3 columns of a row in this report, while a column link only permits me to pass 3 column value at most. Is there anyway that I can pass more column values to hidden items in another page?
View 3 Replies
View Related
Jul 19, 2013
CREATE TABLE TYPE
(
c1_type VARCHAR2 (10),
c2_type VARCHAR2 (10),
c3_type VARCHAR2 (10),
c4_type VARCHAR2 (10),
c5_type VARCHAR2 (10),
c6_type VARCHAR2 (10),
[code]......
actual output of the below query, but i want to display in different way
select * from type;
C1_TYPE C2_TYPE C3_TYPE C4_TYPE C5_TYPE C6_TYPE C7_TYPE C8_TYPE C9_TYPE
Region_D Region_E Region_F Region_D Region_E Region_D Region_M Region_D Region_E
The expected output should be like this below, how to write a query or which built in function used to get the below result,
Region_D
Region_D
Region_D
Region_D
Region_E
Region_E
Region_E
Region_F
Region_M
View 4 Replies
View Related
May 20, 2011
I had a table( T1). Five columns exists in the table. The table data is like below
C1C2C3 C4C5
--- ----- ---- ----- ----
JAN FEB MAR APR MAY
One Two Three Four Five
I need the output like below one
JANFEBMARAPRMAY
---- ----- ----- ---- ----
OneTwoThreeFourFive
View 13 Replies
View Related
May 4, 2010
find the Test Case below.
--Creation of Table
create table tb1
(ID number(4),
event varchar2(20),
vdate date);
--Inserting Values into the Table.
INSERT ALL INTO tb1 (ID, event, vdate) VALUES (01, 'V1', '01-JAN-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V2', '02-FEB-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V3', '04-MAR-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V4', '03-APR-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V5', '05-MAY-2009')
[Code]...
--Selecting data from Table.
SELECT * FROM TB1;
ID EVENT VDATE
---------- -------------------- ---------
1 V1 01-JAN-09
1 V2 02-FEB-09
1 V3 04-MAR-09
1 V4 03-APR-09
1 V5 05-MAY-09
2 V1 01-JAN-10
2 V2 02-FEB-10
2 V3 04-MAR-10
2 V4 03-APR-10
2 V5 05-MAY-10
10 rows selected.
how can i display the data as below format using Oracle 9i SQL.
IDV1 V2 V3 V4 V5
--- ---------------- ------------ --------------- -------------- ------------
11-Jan-092-Feb-094-Mar-093-Apr-095-May-09
21-Jan-102-Feb-104-Mar-103-Apr-105-May-10
View 4 Replies
View Related
Oct 3, 2011
I have table output as shown below.
AID UCD U_TXT UDATE PID
116 1 Req Documents 01-OCT-2011 100
116 2 AGG APPR 01-OCT-2011 101
116 3 Docs received 02-oct-2011 102
116 1 Tmp received 02-oct-2011 103
117 2 Notice sent 03-oct-2011 104
UCD - We have total 19 codes (1 to 19), each can have multiple rows for one AID.. like 1 repeated twice for AID 116.
PID - Primary id (Primary key column)
Output I am looking
--------------------
AID COL1 COL1_TXT COL1_DATE COL2 COL2_TXT COL2_DATE..ETC
116 1 'Tmp received' 02-oct-2011 2 AGG APPR 01-OCT-2011
117 2 Notice sent 03-oct-2011
If the same UCD repeated multiple times then we should get the max(PID) record for that UCD and for that AID
I tried with group by AID,PID. but couldn't bring the rows to columns. I have attached the script with the post
View 2 Replies
View Related
May 10, 2011
i've follow problem:
select x1
from table
and i get
a
b
c
What i want is
a,b,c
The main problem here is, that it can be
a
b
as such as
a
b
c
d
e
f
in detail, i don't know prior how many i will get. With declare a cursor is it easy, but i try to find one solution only with sql.
View 6 Replies
View Related
Dec 3, 2008
I'm having a table which has a column which has values given inside square brackets.
[[[123412]]] ,[[[[werer34]]]],'[[qw2_w3rt]]
Now, the requirement is to get the values which are inside the innermost square brackets.Such as in
First case : 123412
Second one: werer34
Third : qw2_w3rt
Only the values inside are needed. Is there any way to achieve it using Pl-Sql or just using Sql ?
View 3 Replies
View Related
Nov 20, 2010
i'm trying to put more than one value in one column (by putting value '26','63' in column), so i have next problem:
1. Query select cr_pjid from acc_users where username='ACCBTPS121' give result
CR_PJID
---------
'26','63'
2. Query select * from acc_accbtp_nova_view where ed_id=2 and to_char(pj_id) in ('26','63'); return 186 rows.
3. Query: select * from acc_accbtp_nova_view where ed_id=2 and
to_char(pj_id) in (select cr_pjid
from acc_users
where username='ACCBTPS121'); doesn't return any row...
View 8 Replies
View Related
Dec 6, 2012
updating the column values.
Test data:
CREATE TABLE test_at(nr_a NUMBER, nr_id NUMBER) TABLESPACE ECLP_DATA01
INSERT INTO test_att VALUES(90270091,NULL);
INSERT INTO test_att VALUES(90270091,NULL);
[Code].....
I need to update "nr_id" column of test_at table with the values from test_d table. They can be udpated in any order.
I tried to update using rownum but it failed with "single row subquery returns more than 1 row...."
View 16 Replies
View Related
Jan 10, 2013
Most of the code is working properly except when it come to a person with more than one email type in the table:
Below is the
select emal_pidm, emal_email_address, emal_emal_code,
case
when emal_emal_code = 'PER'
and lag(emal_emal_code,1,'?') over (partition by emal_pidm order by emal_email_code) = 'EMPL'
then emal_email_address
[code]......
Below is Sample data for testing
INSERT INTO emal (emal_pidm, emal_email_address, emal_emal_code)
VALUES (1024069, 'emmaus.ferdinand@xxxx.edu','EMPL');
INSERT INTO emal (emal_pidm, emal_email_address, emal_emal_code)
VALUES (1024069, 'emfer1@xxxx.edu','PER');
[code].......
The attachment is what the output should look like.
View 5 Replies
View Related
Jul 14, 2010
How to split the values from a column?
For example: i had table T1 with below structue
Table T1
userid
-------
sandy1234
raj6785
Andrew12367
Michael56098
i need output like below structure
Nameid
---- ----
Sandy1234
Raj6785
Andrew12367
Michael56098
View 5 Replies
View Related
Oct 30, 2012
Here is my requirement..... I am pretty new to PL/SQL.
This is the procedure
CREATE OR REPLACE PROCEDURE ABCPROC.SP_ABC
(
XML IN CLOB,
P_refcursor OUT SYS_REFCURSOR
)
AS
BEGIN
[code]........
For each account number (I_AC), we have multiple rows in ABC_SVC table. I want to return these values in the refcursor. The issue with above SQL program, the row is returning only when the account(I_AC) have values for all the products 100,101,102. If the row does not exist for one account, then the account row is returned with other products.
I want my output should be in the below format
ACCOUNT_NUMBER COMMISSION CONSUL CONTRA
1YYN
2NN
3N
View 4 Replies
View Related
