i am trying to import full db export using datapump , i have too many errors for objects that is already exist . attached is the log file . thae steps i did so far
1- created the database .
2- imported the full db backup using
impdp system/xxxxxxx full=yes directory=datapump dumpfile=palbe_full_20130322.dp log=palbe_full_22042013.log
I am getting following errors while importing data.
SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
ORA-39083: Object type INDEX failed to create with error:
ORA-06550: line 2, column 1:
PLS-00201: identifier 'CTXSYS.DRIIMP' must be declared
ORA-06550: line 2, column 1:
[code]......
Source:Oracle 11g 11.1.0.2 32 bit on Windows 2003,Destination: Oracle 11g 11.1.0.2 64 bit on Windows 2008
In our Source Database, we are using following to create full export
Source database_name=dbfour,sid=dbfour1
I am creating full export by using following
expdp system/psswd full=y dumpfile=expdp_%date:~0,2%-%date:~3,2%-%date:~6,4%.dmp logfile=explog_%date:~0,2%-%date:~3,2%-%date:~6,4%.log FLASHBACK_TIME="to_timestamp(to_char(sysdate,'yyyy-mm-dd hh24:mi:ss'),'yyyy-mm-dd hh24:mi:ss')"
In my destination DB with database_name=dbfive and sid=dbfive1, i am trying to import whole database by using the file created above and use following
impdp system/pwd@dbfive DIRECTORY=DATA_PUMP_DIR DUMPFILE=EXPDP_20-10-2011.DMP
Process started but after sometime it gave 1200 errors. Is it due to the Different Database name or Is it because i did not create table space in destination database.
I was asked to do export/import of some schemas from 10g(linux) to 11g(AIX) using original expor/import method. I did not consider the character set and started doing export and import. while exporting, I get questionable statistics error in export log file. In the import log, I see the error like CREATE DATABASE LINK "xxxxxxxxxxxxx" CONNECT TO "xxxx" IDENTIFIED BY...
What can be done with these errors?
We started a full db export using exp, and we need to kill it. Is it "safe" to do so? Killing it won't affect the database in any way, right?
$ORACLE_HOME/bin/exp system/xxxxxx BUFFER=140000 FULL=Y FILE=/export/<sid>.exp VOLSIZE=2000M GRANT
S=Y INDEXES=Y COMPRESS=Y
how can i import the oracle 9i dump file into 10g database, while iporting i get following error imp-00002 fail to open dump file
View 4 Replies View RelatedI would like to know if a dump file taken from 10G could be imported into to an Oracle 8I database.
View 1 Replies View RelatedI want to import my oracle 9i dump file into oracle 10g version. What should i do ???
View 2 Replies View RelatedI have exported data of one user an importing into another schema at another server. when i am trying to imoport it is working fine for quite no of imports into tables, but after some time it starts giving me below mention error...
IMP-00008: unrecognized statement in the export file:
<
IMP-00008: unrecognized statement in the export file:
<
IMP-00008: unrecognized statement in the export file:
<ے
IMP-00008: unrecognized statement in the export file:
+A
IMP-00008: unrecognized statement in the export file:
[code]...
I have a rather complicated process to import text files into my DB.I'm given thousands of files every day, separated by "," and with 80 fields each. With a bash script, I take the 45 fields I need and then split each file into x number of files grouping the rows by three fields.Then I use SQL Loader to insert them into de DB.
The problem is that now I must insert on two tables and the "WHEN" clause doesn't allow the use of > and <.
To make things a litle clearer take this text file (already splited and grouped and ready to be inserted):
...
1,1,135,1900,0,12,114,2011/08/25 17:19:00,135,...
1,1,135,1900,0,13,119,2011/08/25 17:19:00,136,...
1,1,135,1900,0,14,117,2011/08/25 17:19:00,137,...
1,1,135,1900,0,15,113,2011/08/25 17:19:00,138,...
1,1,135,1900,0,16,119,2011/08/25 17:19:00,139,...
...
When field 6 is higher or equal to 14, it must go to table a.When field 6 is lower than 14, it must go to table b.I can't use external tables as I'm in a different server.
I have oracle 10.2.0.4.0 installed on Window server 2008 [Machine A] and oracle 10.2.0.1.0 on windowx xp [Machine b]. Now I have taken the export of database on windows server 2k8 [Machine a] by puting the entry in the tnsname.ora file of Windox XP [Machine b].
Now when I am importing on the same machine I am getting the below mentioned error:
C:Documents and Settingsdsharma>IMP FROMUSER=SYSTEM TOUSER=ESCDBO FILE='D:sharevcc53_0106.dmp' LOG='D:sharevcc53_0106_IMP.LOG' ignore=y
Import: Release 10.2.0.1.0 - Production on Thu Jun 9 20:08:11 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: system
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production..With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8MSWIN1252 character set and UTF8 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
Import terminated successfully without warnings.
Two different says in different documentation as below.
1) Import required same tablespace to fit the objects, otherwise it throws error.
2) Import by default uses the default tablespace to fit the objects, but some times it uses SYSTEM tablespace also.
confirm with the correct one.
For importing higher version database exp dump e.g. 10g exp dump into 9i database it is suggested at many places "Always use a version of the EXPORT utility that is equal to the lowest version of either the source or the target database"
I understand from this is, I will be using 9i exp utility for exporting 10g database
I would like to know the ways it can be achieved.
1) Installing oracle 9i client on 10g database Do I still need to execute 9i catexp.sql after that? If answer to above is 'yes', I assume catexp.sql of 9i wont be created after 9i client is installed as such I will need to copy it from 9i database server and execute on 10g database server. Correct? For above question I have assumed catexp.sql has different contents for 9i and 10g
2) After configuring tns file in 9i database, can I use?
exp user/password@10gdbconnstring ....
(of course for small amount of data)
Is there any other option for achieving the same?
Also I understand export and import between any 9.* into any 9.* wont be issue e.g. import from 9.2 into 9.1 Similarly any 10.* to another 10.* wont be issue.
i m having full export .dmp file taken from oracle 10.2.0.1 Enterprise Edition.
i need to reinstall 10.2.0.1 standard edition and want to create database using the dump file which is taken from the Enterprise edition.
I have 2 users (scott and Krishnan).
Krishnan wants to import the table, which was exported by scott.
1) but we should not run the script file of CATALOG.SQL.
2) we can't give the rights of imp_full_database from outside.
Also how user Krishnan can import that table to another user's schema?
I'm importing data from SQL Server to Oracle. I used BCP to export the data from SQL Server. Below is the 1st record of table trlc from the csv file.
trlc.CSV
11032|100|Wman| | |2008-02-08| |
Using SQL Loader to import into Oracle:
TRLC table in Oracle database:
est_no varchar2(10) default ' '
right_no number(4) default 0
maj_auth varchar2(15) default ' '
weight varchar2(10) default ' '
idm_ht varchar2(8) default ' '
c_date date
P_tkt varchar2(5) default ' '
sqlldr user/pwd@db02 control=trlc.ctl log=trlc.log
trlc.ctL:
load data
infile 'trlc.csv'
replace
into table trlc
fields TERMINATED BY '|'
TRAILING NULLCOLS
(est_no,right_no,maj_auth,weight,idm_ht,c_date,P_tkt)
The rows get inserted successfully. But the result sets are different, for example: When I do a select in SQL Server,'select len(weight) from trlc;' , I get the length as 0. But when I do a select in oracle database, I get the length as 1. Also, the result set varies for the query below:
select * from trlc where weight=' ';
(SQL Server returns 1 row but Oracle returns no rows)
Do I need to mention any conversion code for the weight field to accept ' ' value?
While doing import got the below errors.
Failing sql is:
BEGIN DBMS_JOB.ISUBMIT( JOB=> 361, NEXT_DATE=> TO_DATE('2010-09-06 21:18:27', 'YYYY-MM-DD:HH24:MI:SS'), INTERVAL=> 'SYSDATE
+ 45/86400', WHAT=> 'PK_MONITORS.SP_OVERDUE_JOB;', NO_PARSE=> TRUE); END;
ORA-39083: Object type JOB failed to create with error:
[code]...
I have received a dump, which i need to put on a newly created schema, there is a particular table with more then 4 million rows, and other tables have hardly few thousand rows.
I want to import it in a way where only 1000 rows get imported for this table and other tables do not get affected. Is there a way to do it?
Note: Tables in dump are more then 200.
I am trying to export a partition of a table and import it to another database. I get the below error when I try to import.
ORA-14400: inserted partition key does not map to any partition
If I export the table(for that particular partition) and import the table(after dropping the table) in destination, the partitions and sub partitions are created without any problem.
The table is Range Partitioned and Sub partitioned in List. So I had to perform the below operation if I want to retain other data in the Destination table.
1. Drop the existing partition
2. Create the partition and sub partition, same as source
3. Execute imp
In fact I had to perform step#2, as if I split the partition also, the sub partition gets replicated in the new partition, which again throws the same error. Is there better way of managing the partitions and subpartition in destination with exp/imp utility, so that I need not perform step#1 and step#2 manually.
while importing dump file into database,i received the following error.
imp -00033 table demo not found.
But i checked in dump file ,the table exist .
Below is the command i executed in unix box.
imp system/manager file=data.dmp log=data.log tables=DEMO feedback=100 buffer=1000 fromuser=TOM touser=maddy
i take export of one table (export complet successfully without warnings) when i am going to import into prduction databae the data in the table no coming i past the table structure and import command and logfile for import.
import command
imp user/user@database file=C:Tempuserdrop_id10g _id_rac_ra_headertables.dmp log=C:Tempuserdrop_id10g _id_rac_ra_headertablesimp.log tables=t_id_rac_ra_header fromuser=user touser=user statistics=none ignore=yes
my table structure in production database is
CREATE TABLE t_id_rac_ra_header
(ra_company VARCHAR2(10) NOT NULL,
ra_key NUMBER NOT NULL,
ra_doc_type VARCHAR2(50) NOT NULL,
ra_doc_number VARCHAR2(25) NOT NULL,
ra_doc_date DATE DEFAULT SYSDATE NOT NULL,
ra_reserve_key NUMBER,
[code].....
I am trying to use NETWORK_LINK option in datapump and import a table from one server to another. I gave the below command :
C:>impdp example/example@db DIRECTORY=DATA_PUMP_DIR
NETWORK_LINK=db.legal.regn.net remap_schema=BI:example
tables=BI.BI_DIRECT dumpfile=BI.dmp logfile=BI.log
Got the following errors :
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
Is this error related to the permission in the OS level (windows 7 in my case)? I manually created the folder 'DATA_PUMP_DIR' in the specified directory path. Though the directory I created (DATA_PUMP_DIR) shows read-only in the general tab of the property, I am able to create files under the folder 'DATA_PUMP_DIR'.
We are working on migrating from 9.2.0.4 to 11.2 and we've set up a test machine so that we could test the install and the import (as well as test additional 11g features that we want to begin using).
So we created the database and created all of the tablespaces beforehand.
Our import command is
$ORACLE_HOME/bin/imp system/manager FULL=Y BUFFER=140000 FILE=/dbexport/Lhtech.exp VOLSIZE=2000M GRANTS=Y INDEXES=Y COMMIT=Y IGNORE=Y
However, when we run the import, we get the errors like so:
Import: Release 11.2.0.1.0 - Production on Tue Oct 5 15:01:19 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V09.02.00 via conventional path
[code]....
First of all, the block size in our "newly" created tablespaces is 8192...and these are obviously trying to recreate the tablespaces with a block size of 2048.
1) Why is it not ignoring these create tablespace commands when those tablespaces already exist?
2) how in the world do we get around the block size issue? We've tried nearly everything we could find, but we've still not had any luck.
While trying to import a schema using Data Dump, I am facing the following issue - UDI-00018 - Import utility version can not be more recent than the Data Dump server.Following is the version information of the source and target DB and the utilities :
Source DB server : 10.1.0.2.0
Export utility : 10.1.0.2.0
Import utility : 10.1.0.2.0
Target DB server : 10.1.0.2.0
Export utility : 10.2.0.1.0
Import utility : 10.2.0.1.0
I wanted to migrate two schemas from:
Source Database machine OS: OEL 5.9 , 64-bit
Source Database version/addition: 11.2.0.1.0 SE
to:
Target Database machine OS: Red Hat Enterprise Linux Server release 5.4 , 64-bit
Target Database version/addition: 10.2.0.4.0 EE
Therefore, I did an export using Oracle Data Pump:
Export: Release 11.2.0.1.0 - Production on Tue Jun 11 13:13:28 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Starting "SYSTEM"."SYS_EXPORT_SCHEMA_04": system/******** directory=DATA_PUMP_DIR dumpfile=exp_PRODSCHEMAS_20130611.dmp schemas=PRD_100,SHR_100 logfile=exp_PRODSCHEMAS_20130611.log VERSION=10.2.0.4.0
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 1.026 GB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
[code]....
does it have to do with the VERSION parameter value? what can I check to investigate?
I am getting the below error when i am trying to import the dmp file into my oracle 11g.
impdp system/password@orcl dumpfile=aaa.dmp directory=datapump remap_schema=dev:user
ORA-31626: job does not exist
ORA-04063: package body "SYS.DBMS_INTERNAL_LOGSTDBY" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_INTERNAL_
LOGSTDBY"
ORA-06512: at "SYS.KUPV$FT", line 949
ORA-04063: package body "SYS.DBMS_LOGREP_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_LOGREP_UTIL"
i get flat file and i have set up a control M job so that it runs at a particular time.
initially my control file was as below:
LOAD DATA
INFILE 'DFILEabcd.dat'
BADFILE 'BDabcd.bad'
REPLACE
INTO TABLE abcd_table
(A position(01:09) CHAR,
B position(11:12) CHAR,
C position(14:33) CHAR,
D position(37:50) char)
this was working fine. control M did not send FAIL message.but later i had to change the ctl file due to requirement. i had to add a when clause.
my code after modification is:
INFILE 'DFILEabcd.dat'
BADFILE 'BDabcd.bad'
REPLACE
INTO TABLE abcd_table
when A<>'10'
(A position(01:09) CHAR,
B position(11:12) CHAR,
C position(14:33) CHAR,
D position(37:50)
now the control M is sending an erro message after it runs the job. error is Return 5. thats all it gives.
i think it is due to errorlevel 1. in log file it says zero records inserted due to data error. then what is causing control M to send fail message??
sqlloader is loading all the required records correctly.
We can Import dump from higher database version to lower database version.
View 26 Replies View RelatedI want do this connected in windows 2008 r2 with oracle 11G R2 execute an import, that will do a full import, from a linux with oracle 10g called "SUPORTE1"
I´m trying this in the windows2008 machine
impdp system/manager@w2k811r2 full=y DIRECTORY=dpump NETWORK_LINK=SUPORTE1;
and I get the follow errors
ORA-39001: valor de argumento invßlido ( argument valor invalid)
ORA-39200: O nome do link "SUPORTE1;" Ú invßlido. ( link name invliad)
ORA-44004: nome SQL qualificado invßlido ( sql name invalid)
I tested the connection, db-link and created the directory.
let us consider mytest schema is having 6 tables
tname tabtype
myt table
myaxpertlog table
abb table
ccc table
ddd table
xxx table
now from this schema i want full dump and also from myaxpertlog table i required metadata only not records.
c:> export mytest/log file=20130409mytest0904pm.dmp tables=(myaxpertlog) rows=n
if i tried i am get only one table but it does have records.