Is it also possible to use the EXPORT and IMPORT utilities from a client machine? I want to give these utilities to one of my developers without allowing him to sit in front of my Oracle server.
i am using oracle 11.2.0.1 and windows7 OS
I want to export a table ( using exp or expdp ) from client machine. Dump file should be created to client machine.
Is this possible ? How to do this ?
I was asked to do export/import of some schemas from 10g(linux) to 11g(AIX) using original expor/import method. I did not consider the character set and started doing export and import. while exporting, I get questionable statistics error in export log file. In the import log, I see the error like CREATE DATABASE LINK "xxxxxxxxxxxxx" CONNECT TO "xxxx" IDENTIFIED BY...
What can be done with these errors?
Whats is the usage of log file in Import/export .If i use following command ,it exports successfully
exp scott/tiger file=check.dmp log=empc.log tables=emp
and if i remove .log from here it will also export successfully So why do we use .log in import/export.
how can i monitor the export and import job and how increase the export and import job performance.
can i monitor the export and import job by checking the log and dump file created by export and import and can its performance increase by configure parallism. m i right or not?
I would like to run a daily job that will export the table data from SQL server table and Import back into Oracle table. I might need to run the query to update the flag back into sql server table once job is done. How can i do this using either sql server or oracle?
We have oracle 9.2 and sql server 2005.
Normally i do from flat file or csv file which is generated by developer or user from source destination (not me) and i dump into oracle using sql*loader but this time I have to directly extract/export the data from MS Sql server and load into Oracle table, mostly it will reload so i might doing any massaging data during the load.
Is it sql sql*loader has any function that i can use the datasource to connect the MS Sql server and fetch the data and insert back data into oracle? I have access to Sql server but i don't how to use sql server to do this or using oracle as a daily job even because have to schedule the job for this as it will be a daily job.
We are doing daily cold backup. Due to lack of disk space,we couldn't Hot backup. We want our database to be up when doing backups. Since only export/import is possible in our scenario, clarify few queries:
1) Export was done during off period from the live server.
2) We have a development server, in which we have to update our database daily. Can i overwrite the Development server using IMPORT daily? Since this import might show lots of errors (Object already exist), what parameters can i use for import.
When i do a table export , it got over in 30 mins.When i do import using same dump file (that was created in 30 mins), its taking more than 30 mins .
why the import is taking more time than the export time ?
I want to create two or three sachems on my production server which should be the same copy of my another second production server. And I access this second server through VPN connection on toad9.0.1. And I access my production server through VNC viewer and database through toad.
How cloud I create schema on my first prod. server from second server.
Is there any possible to export & import the data using unix pipe parallel with two server( at the same time)?
Eg. In Server A, i will export the data & import the data in server B at the same time. (300 GB data)
I am using Oracle 11.1.0.7.0 version and UNIX-Hp OS.
which export/import method should i use when i am to do export/import... like table level, tablespace level ,full database level, schema level?
1.Datapump or
2.Traditional export/ import ?
I was told to move 8 tables along with constraints,indexes,grants,rows,triggers from one database to another database.I did export and import for that.The command i used was
exp p5/chevuri@db3.SBC.COM file=C:alaexp.dmp log=C:alaexp.log
tables= ('tab1','tab2','tab3','tab4','tab5','tab6','tab7') rows=y indexes=y grants=y
constraints=y triggers=y direct=y
Below is the export output log.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 -
64bit Production With the Partitioning, OLAP, Data Mining and Real
Application Testing options Export done in WE8MSWIN1252 character set
and AL16UTF16 NCHAR
character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Direct Path ...
. . exporting table tab1 12 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
[code]...
Here is the import output log
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via direct path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
. importing JAM's objects into JAM
.
[code]...
Everything got imported successfully . Still i have a doubt in export and import command, whether the command that i used for export and import was correct or if there is anything need to be added in command.
import and export database in oracle with proper example and procedure?
View 3 Replies View Related1)Want to perform an Export from a Production Schema and Import the results into Test Schema. BUT, do not want to export ALL objects from Production (only a subset of tables). Is this possible?doco on how to do this? (rather than a complete Export and then a complete Import).
2)I have 2 test instances of Oracle on the same development server, UNIT and SIT. Am using Oracle SQL Developer tool.
While in the UNIT instance, is there a way to select data from the SIT instance? An example of syntax to use?
3) Can tables in the UNIT instance be compared to tables in the SIT instance, through any existing Oracle utilities
In oracle 11g R2 , I face a problem when I export/import xml records in the tables . Everytime it takes huge time (like 2 or 3 days) to import or export the data . But the dump size is very small (4gb) and this dump comes from a vendor so that I dont understand that is it a data structure problem or it the normal behaviour to import xml records.
I am not used to with xml record with oracle database before. Here I am using datapump feature . I also mention that when I delete the schema (where I imported the xml data) , it also takes 2/3 days to delete.The import script will hang in the following stage :
=========================
bash-3.2$ impdp system/sys123 DIRECTORY=isb_dir DUMPFILE=jblbld_20110301_01.dmp,jblbld_20110301_02.dmp,jblbld_20110301_03.dmp logfile=JBLBLD_28Jan2012.log schemas=TBLD;date
Import: Release 11.2.0.1.0 - Production on Sun Jan 29 11:10:38 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_SCHEMA_02" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_SCHEMA_02": system/******** DIRECTORY=isb_dir DUMPFILE=jblbld_20110301_01.dmp,jblbld_20110301_02.dmp,jblbld_20110301_03.dmp logfile=JBLBLD_28Jan2012.log schemas=TBLD
Processing object type SCHEMA_EXPORT/USER
[code]...
The machine has 16 cpu , 32 gb RAM and during export/import most of the time maximum memory will free.
I am trying to export/import of a schema who's size is around 60 GB.
Export parfile goes like this..
file=expdmp1.dmp, expdmp2.dmp, expdmp3.dmp, expdmp4.dmp, expdmp5.dmp, expdmp6.dmp, expdmp7.dmp
filesize=10240M
log=explog.log
owner=owner1
Import parfile goes like this..
file=impdmp1.dmp, impdmp2.dmp, impdmp3.dmp, impdmp4.dmp, impdmp5.dmp, impdmp6.dmp, impdmp7.dmp
filesize=10240M
log=implog.log
fromuser=owner1
touser=owner2
ignore=y
I am going to run this on production. So want to check it..
I am new to Oracle DBA. m facing one problem. i imported and exported my data from one oracle DB to another by using exp/imp.....in both exp/imp log files, its shows the fallowing messages at the end.
"Import terminated successfully with warnings."
"Export terminated successfully with warnings."
but when i count there are some rows missing in some tables...
what could be the cause? is there any other way to cross check whether export/import was successful...
is it possible to import only one or two table from a schema export file or from a full database export file.
View 2 Replies View Relatedi'm trying to do an export/import process using command prompt and the idea is export a records based on the date condition. and the date will be the parameter. my code is like this:
exp <username>/<password>@<database> file=<table_name>.dmp tables=<source_table> query="where <date> between &start_date AND &end_date";
is it possible to do like this, that it should prompt you to enter the start and end date?
then my import script:
imp <username>/<password>@<database> dumpfile=<table_name>.dmp tables=<target_table>;
the idea is get only the records from ProdDB based on the date condition, and append it to the MISDB.
I would like to Import data from Oracle 10g using Microsoft Sql Server (2008 R2) Import/Export Wizard, but i get this error when i try too establish the connection :
ora-01017
this the step i followed;
1- i filled the server name
2- username & password
3 - test connection ---> success
but when i try to follow pressing next(Suivant) i got the ora-01017 Error
Quote:The EXP_FULL_DATABASE and IMP_FULL_DATABASE, respectively, are needed to perform a full export and import.
what privileges are required to perform only schema level export and import?
any other utilities that we can use to load data from our PROD server (10g) to DEV server (9i)? I've read some related topics here that it's not possible to import from a HIGHER to LOWER versions of Oracle. We've tried (many times) EXPorting selected tables from the 10g dB, then IMPort it to the 9i dB and we've haven't succeeded anyhow. PROD & DEV have a different schema/owner but the same table structures.
View 4 Replies View RelatedHow to export and import table using Pl/Sql developer from one database to another.
View 9 Replies View RelatedI wanted to load some data(selected rows) from one system to other.
from source(production) system Toad: selected * from employee table where registration date is not today.
from data grid I exported the rows using save as (in insert statement format) to employee.sql.
the sql file(employee.sql) has the below values for emaplyee 2,60716197237375E17 in the source(production) system this value is 260716197237375278, Later I loaded the sql file to dev system at linux prompt with sql file
@emplaoyee.sql
I retrieved the data after loading using to_char
select toc_char(emp_code) from employee_t;
the value I got is :260716197237375000
where as my expectation is : 260716197237375000
Is there any configuration required on linux system to convert the data correctly while loading to database using @employee.sql?
To conclude:
Exported value : 260716197237375278 (but exported as 2,60716197237375E17)
After import the value is : 260716197237375000 instead 260716197237375000
the database (11gR2) is located on Linux server. A business application is installed on a Windows server with an Oracle client 11g.The application is able to start a datapump export, but as matter of fact the dumpfiles are always written to the Linux-server. The directoryobject is defined as DATA_PUMP_DIR (which is the default directory).
Now we are supposed to change the datapump export in a matterthat the dumpfiles get written to the Windows server. Creating a new directory (e.g. c:datapump) and starting than the datapump from theclient always raises the errors
ORA-39002: ...ORA-39070: ...ORA-29283: ...ORA-06512: in "SYS.UTL_FILE", Zeile 536ORA-29283: ...
Is it possible at all to start a datapump export from a Windows client and writing the dumpfiles to the Windows server itself? Or do the dumpfiles always written to the database-server?
I have installed oracle 11g Release 11.1.0.1 on windows server 2008.I access this server from a client machine running on winXP through SQL PLUS. I wanted to shutdown and start DB server from this client machine. Accordingly i issued shutdown immediate command from SQLPLUS.
Now when i tried to start the DB with "STARTUP NOMOUNT" command i received error 12514. I understand this error means that the listener received a request to establish connections to a database but since DB services are not up and running, hence the error. So my first question is how do I resolve this error.
Continuing further, i tried to re-connect to the database as sys, and i received another error ORA-01041. So, my second question is why did i receive this error and again how can i resolve it
may be you can point me to relevant reference in Oracle documentation) how can i start and stop oracle from a client machine using SQL interface in CLI mode and windows environment and avoid this error.
I want to use the saved Toad username password into SqlDeveloper. is there any way to use the same username password without recreating new connection to users.
View 3 Replies View Relatedi am accessing a form from server through URL using oracle application server FORMS & REPORT services. and i am trying to export table data into excel sheet on my local machine or the server itself.
i am using the following code on WHEN BUTTON PRESSED
PROCEDURE REFERENCELIST IS
BEGIN
DECLARE
AppID PLS_INTEGER;
ConvID PLS_INTEGER;
RCount Number := 0;
CURSOR c1 IS SELECT MATID, MATCODE ,DESCRIPTION , PARTNO FROM REFERENCETABLE;
PROCEDURE INSERTROW (invalue VARCHAR2, incol NUMBER) IS
[code]....
this does not give any error and any result as well. the above code very much fine while i run it on my local laptop.
1) Is there a way to skip database jobs while exporting (EXPDP) ?
2) Is there a way to skip database jobs while importing (IMPDP) ?
Why do export-import require temporary tablespace? Since export-import do behave like DMLs, when does temporary tablespace be needed by datapump utility?
View 2 Replies View Related