Server Administration :: High REDO Generation?
Jan 7, 2013
Redo is getting generated very high. how to find out the reason ? database kept under 2 node cluster. chcked alert log trace and log writer trace files. pasted the content as below:
--alert log trace from node1 ( node2 also has same type of message ). Archive destination disk group - TXCOM_BACKUP_01 having enough space ( 80gb )
Mon Jan 7 00:49:10 2013
Thread 1 advanced to log sequence 448546 (LGWR switch)
Current log# 1 seq# 448546 mem# 0: +TXCOM_DATA_01/txcom/onlinelog/group_1.274.785770579
Current log# 1 seq# 448546 mem# 1: +TXCOM_DATA_01/txcom/onlinelog/group_1.302.802265189
Mon Jan 7 00:49:10 2013
[code]...
In the alert log, I am able to see the archive destination disk group ( TXCOM_BACKUP_01 ) is getting DISMOUNTED and again getting MOUNTED during every archive file generation. .
Mon Jan 7 00:49:20 2013
SUCCESS: diskgroup TXCOM_BACKUP_01 was mounted
SUCCESS: diskgroup TXCOM_BACKUP_01 was dismounted
SUCCESS: diskgroup TXCOM_BACKUP_01 was mounted
SUCCESS: diskgroup TXCOM_BACKUP_01 was dismounted
archive destination parameter in both nodes are not configured. it should read diskgroup name. ( +TXCOM_BACKUP_01 ) and corresponding size limit. Should i configure this ?
SQL> show parameter db_recovery
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
db_recovery_file_dest string
db_recovery_file_dest_size big integer 0
[code]...
should i bring the database to mount stage and set log_archive_max_proesses to high count ? now value is 2 ( default )
View 2 Replies
ADVERTISEMENT
Nov 15, 2007
I have created 5 materialize view with REFRESH FORCE option.
REFRESH is done with every 10 min.
My destination database is MySQL.
DBlink is created in ORACLE 10g
Materialize view is created using DBLINK.
Since refresh materialize view done with every 15 min, my Redo generate gone on toss.System is generating 1 redo file for 1 min. The size for redo log is 500MB.Since materialize views are created base on mysql table, system is doing complete refresh every time which causing to generate more and more redo.
Is there any setting/option/or solution to reduce high redo generation.
View 2 Replies
View Related
Jul 26, 2010
I have oracle 9i running on HP-UX, I would like to find how much redo we are generating in a given period of time, is there any script that I can use to get this information?
View 3 Replies
View Related
Aug 20, 2010
redo generation. As I found the below statement in another forum."Undo segment generates the redo data also, because undo segment is database changes, so it generates the redo data also."
How a Undo segment can generate Redo and Undo datas.
View 12 Replies
View Related
Sep 14, 2010
We had our production database hosted on Oracle 9.2.0. Few months back we have migrated it to Oracle 10.2.0.4.0. After Migration I have noticed that redo generation has become very very high. In earlier case no. of log files generating in production hours were around 30 where as after migration it become around 200 files per day. I have run statspack report on this database. Report is saying that db block change & disk write is become very high. Parameter timed_statistics has also been set to FALSE. Even then there is not any reduction on no. of log file generation. I had used import export for upgrading the databases.
View 13 Replies
View Related
Jul 1, 2010
How to Find Out Which SQL Statements Causing excessive Redo generation?
View 3 Replies
View Related
Mar 16, 2012
on weekends we have too many archive logs generated .i have taken the data of a week and found that average archive log generated from monday to friday is 7 files per day but on satuarday and sunday the average is 60 files and FG1 gets full. on weekends we have all type of backups running like incremental,archival and logical backups and on sunday we have full physical backup
what is the reason of too many archive log files generations at weekends. is it due to hot and logical backups , if yes then how ?
View 9 Replies
View Related
Nov 22, 2012
when I was analyzing high CPU utilization issue, I saw that the most of the top PID's were INACTIVE in database. But it was utilizing more than 4% CPU. how it is utilizing CPU without doing any work in database?
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
24013 oracle 2167M 1581M sleep 53 0 0:01:53 20% oracle/1
13260 oracle 2167M 1580M sleep 30 0 0:01:16 14% oracle/1
24399 oracle 2167M 1582M sleep 59 0 0:03:01 4.2% oracle/1
11509 oracle 2178M 1593M sleep 59 0 0:02:10 2.8% oracle/11
[code].....
View 3 Replies
View Related
Nov 11, 2011
I have deleted lot of records in a table.Would oracle be able to insert in the empty blocks generated from deletion of records without bringing the high water mark down.
View 7 Replies
View Related
May 7, 2010
We are facing one issue on one of the database. The database is generating large trace files(14000) from last two days. That consumes around 15G space on the disk. And the content of the trace files is not having any meaningful message to debug:
cat /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc
*** TRACE DUMP CONTINUES IN FILE /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc ***
Dump file /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc
*** TRACE DUMP CONTINUED FROM FILE /apps/oracle/admin/fs90uat/bdump/fs90uat_p050_23966.trc ***
... (Many lines with above message)
The alert log is having one repeated error yesterday:
Thu May 6 22:00:03 2010
Errors in file /apps/oracle/admin/fs90uat/bdump/fs90uat_j000_11811.trc:
ORA-12012: error on auto execute of job 2647927
ORA-04063: ORA-04063: package body "ORACLE_OCM.MGMT_DB_LL_METRICS" has errors
ORA-06508: PL/SQL: could not find program unit being called: "ORACLE_OCM.MGMT_DB_LL_METRICS"
ORA-06512: at line 1
The corresponding trace file is having error:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /apps/oracle/product/10.2.0/db_1
System name: SunOS
Node name: corpqadb30
[Code] .......
View 2 Replies
View Related
Oct 21, 2011
i am using oracle 10g on solaris 10 os.currently archived log is generated by size wise 52 mb.i want to know whar is the best practice for archive log generation . it should be time interval or size wise.
View 1 Replies
View Related
Jun 10, 2013
I have one tablespace called U01. This tablepspace contains 31 data files. Due to high water mark I was unable to most datafiles. Since my database running onair application they will not provide me downtime to move the tables. Is there anyway to fix the high water mark without getting downtime window? almost 700+g space unused. I need to reuse them asap because running out of space with in asm diskgroup.
SQL> SELECT A.TABLESPACE_NAME,round(SUM(A.TOTS)/1024/1024) "Tot size MB",
2 round(SUM(A.SUMB)/1024/1024) "Tot Free MB",
3 round(SUM(A.SUMB)*100/SUM(A.TOTS)) "%FREE",
100-round(SUM(A.SUMB)*100/SUM(A.TOTS)) "%USED",
round(SUM(A.LARGEST)/1024/1024) MAX_FREE,SUM(A.CHUNKS) CHUNKS_FREE
4 5 6 FROM (
7 SELECT TABLESPACE_NAME,0 TOTS,SUM(BYTES) SUMB,
[code]...
View 5 Replies
View Related
Apr 12, 2010
This morning i feel my db server very slow to response. When i check, i saw db server got high load but low process.
View 5 Replies
View Related
Oct 16, 2010
My problem is only on Some Saturday's my Oracle server's Load average goes high (more than 300 ).
-- oracle version 11.2.0.1.0
-- runs on Sun solaris 10
-- Sun fire V 440
-- Sun storEdge 3315 connected to the server.
Same setup is working find with higher volumes without any problem but only on saturday's, that too not on all saturdays, some specific saturdays the load average goes high.
At the time nothing will be processed from the application side and the cpu utilisation goes high upto 95 %.
I am sending necessary information as follows.
vmstat 6 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s0 s1 s3 s4 in sy cs us sy id
3 0 0 28660024 6513408 285 212 2044 2 2 0 0 0 17 0 42 830 3469 1380 22 5 74
125 0 0 29027480 6156256 2 6 34 0 0 0 0 0 5 0 10 791 53770 30278 83 17 0
125 0 0 29027680 6157496 29 140 21 1 1 0 0 0 5 0 9 786 52756 30309 83 17 0
116 0 0 29031600 6159896 24 125 0 0 0 0 0 7 3 0 5 819 54081 31069 83 17 0
[code]....
View 1 Replies
View Related
May 27, 2011
I learnt that logWriter writes in the redo log files when redo log buffer is 1/3 full, it means that 66 % of redo log buffer are always empty and never used,
if no, isn't a waste of memory (66 % always empty !)
View 5 Replies
View Related
May 21, 2013
I've a situation where I've very less redo logs generated. Let us say 10MB. Which solution will be better ?
1. Create one redo log group about 12 MB in size.
2. Create two redo log groups about 5 MB each in size as recommended by Oracle.
Even though solution 1 is also appropriate for me because I've less redo generated than the redo log group size. My whole redo will fit in this and I can raise checkpoint forcefully after certain period of time let us say every 3 seconds.
In one of our DB I found scenario one is implemented. So I want to know pros and cons of both of these practices.
View 7 Replies
View Related
Feb 1, 2011
I have some doubts about redo log files,
1) Can we fetch 'select statements' from redo log files through the use of log miner utility or any other?
(I think redo log file contains only insert,update,delete and DDL/DCL commands only)
2) If "No" to the above answer then how can i fetch all select statements fired on the system for a day or particular time.
(setting of sql_trace may be the one of them, but can it be possible for system level)
View 4 Replies
View Related
Oct 5, 2012
Today i noticed one problem with my database,my redologs switches in every 3mins,i also noticed there is no more transaction changes happening in database but still redo switches.
Fri Oct 05 06:10:05 2012
Thread 1 advanced to log sequence 79244
Current log# 2 seq# 79244 mem# 0: D:ORADATAORACIREDO02.LOG
Fri Oct 05 06:12:16 2012
Thread 1 advanced to log sequence 79245
Current log# 1 seq# 79245 mem# 0: D:ORADATAORACIREDO01.LOG
Fri Oct 05 06:14:28 2012
[code]......
why redo switch happening,any internal problem causes redo to switch .
View 5 Replies
View Related
Feb 22, 2013
SQL> update t set a = 1 where b = 2; -- must have redo record
2 rows updated.
SQL> rollback;
the above redo record that uncommit changed must be written from redo buffer to the online redo logfile. why Oracle write the redo record that uncommit changed to the online redo logfile ? when it will be used?
View 10 Replies
View Related
Dec 7, 2011
Whenever any transaction happen in database redo has generated for this transaction. Do select statement treat as a transaction as it doesn't modify any thing in database. And If select statement should not be a transaction, there should not be any redo generation for select statement.
So is select statement generate redo? If yes then Why ?
View 1 Replies
View Related
Nov 17, 2010
understanding a redo/undo concept . Refer following data
create table t(n number);
insert into t values(10);
commit;
now I update as following
update t set n=20;
As per my understanding the before image i.e. n=10 is stored in undo (to be used for rollback, transaction recovery and even in instance recover but not in media recovery) and after image n=20 is stored in redo (to be used for various recovery purposes including media recovery in case of consistent backup).
So it is redo logs for rolling forward and undo for rolling back making transaction, db consistent . If my above understanding is true then what is meant by the term 'redo required for undo'?
Also, if there are 2 database db1 and db2 connected using database link where we are populating t1 table in db1 using t2 table in db2 using db link where redo and undo will be updated db1 or db2?
View 9 Replies
View Related
Apr 17, 2010
When i was starting my database .there was an error
ora-00333:redo log read error block 203 count 8192.
View 1 Replies
View Related
Jun 8, 2012
We have one primary oracle database 10.2 and standby by database with no data guard. Initially we have 2 redo log group in primary and standby database.
We have recently add 2 more redo log and increase the size of log member from 50m to 200m in primary database. We don't have any problem in primary database.but in standby database we face a problem because we cannot open it. It always in mount stage in which . How we change the size of current redo log because we can't run. Alter system switch logfile command in mount stage.
View 3 Replies
View Related
Jan 18, 2012
I have a question on export dump file generation.
select sum(bytes)/(1024*1024*1024) "GB" from dba_segments where owner='JACK';
The above select query give the output of Schema size with 15 GB. When i perform the same schema export, the dump file size generating is 2 GB. What is the difference between the two scenarios as how come there could be a variation in file size?
View 6 Replies
View Related
Jul 23, 2010
I am trying to generate dynamic control file, as the files I want to upload are coming from different source and their name is constantly changing but following a fix pattern and naming convention.
I am able to generate dynamic control file through SQL. But while calling from BATCH file, i am unable to sent the file name as parameter.
All the examples i have searched are for UNIX, how to do it with BATCH File in WINDOWS.
View 4 Replies
View Related
Jun 6, 2013
I have 15 million of records as csv, want to load through sqlloader Is sqlloader is the right option to load high volume of data? I have loaded with 2.5 lac records which has taken 4 mins to load.
View 9 Replies
View Related
May 28, 2013
why CPU utilization is high(99%) on one server in 2 node RAC at every time. On the other server it is very low.
View 9 Replies
View Related
Jan 26, 2013
I have a RAC 48 cores on solaris. I check dbconsole when application performance is very slow and everyone complains, and I see that the main wait is cpu - also on the awr report. however when I check server cpu I see about 80% idle! so how can I make oracle use more cpu power instead of waiting for it? I don't think that parallel is an option here because I can't change the application code.
View 2 Replies
View Related
Sep 6, 2010
I have a Database of Size approx 150GB. I want to create a standby server(High Availability).
1)If our Primary Database crash, the standy server should instantly start automatically i.e no down time.
2)There should be no data loss.
3)Are Data Guard and Replication similar?
View 4 Replies
View Related
Aug 21, 2012
I have a question.
When and Where HASH VALUE for a given SQL statement get generated?
View 5 Replies
View Related
