How to determine number of connections establishing from application server to database server for a particular user and also query the user is running in database.
user -- application user created in database.
same user exist in application.
how many maximum connection, a particular user can have in oracle. and how many maximum connection if user has 'resource profile' as default.and i am using oracle 11.2.0.1.0
View 1 Replies View RelatedIf the temp space left is 0%, i.e. all temp space used up, is it possible to make new DB connection ( can new users still connect to the DB)?
Or re-phrasing the question... How much of temp space (if at all ) is required for a new user to login to DB? Like SORT_AREA_SIZE in PGA. So, as memory sort area is already used ( Temp space is 100% full), can DB make more new connections?
I created an externally authenticated user in database. And can login without password with below syntax.
SQL> connect / @TESTDB
Connected.
SQL> show user;
USER is "SCOTT"
This scott user has a proxy permission to another DBuser PROXY_USER. Previously I used to login using below syntax.
connect scott[proxy_user]/password_for_scott@TESTDB
So now, what syntax should be used for this "ExternallY Authenticated" user to login as a proxy user?
I have a strange problem when creating a view in user from another user
I have a user called "Cash_tst"
its syntax creation is
-- Create the user
create user CASH_TST
identified by ""
default tablespace CASH
temporary tablespace TEMP
profile DEFAULT
quota unlimited on cash;
-- Grant/Revoke object privileges
grant connect to CASH_TST;
grant dba to CASH_TST;
grant resource to CASH_TST;
-- Grant/Revoke system privileges
grant create any view to CASH_TST;
grant unlimited tablespace to CASH_TST;
I want to create a view
CREATE VIEW TAMER
AS SELECT *
FROM [b]AROFL[/b].RA_CUSTOMER_TRX_LINES_ALL_BEFO
"AROFL" is another user on the same database
when try to create the view "tamer" i got message of
"insufficent privilege"
although i granted "create any view" to the user "cash_tst"
I am trying to create a job that will execute a shell script on a remote server (Server B) when an existing job, on the local server (Server A), completes.
I have spent the last couple of days combing through Metalink, Oracle Documentation, AskTom, and Google. I know this is a relatively "new" feature/ability - released with 11.2 - but this particular error stack is no where to be found. I have attempted to be completely thorough with the information I provided, along with being diligent about masking important configuration information.
While the calling Job is starting the second job, the second job appears to timeout at 60 seconds and the job status is reported as failed with this error stack:
ORA-12537: TNS:connection closed
ORA-06512: at "SYS.DBMS_ISCHED", line 4921
ORA-06512: at "SYS.DBMS_ISCHED", line 6853
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-29261: bad argument
ORA-06512: at "SYS.DBMS_SCHEDULER", line 3975
ORA-06512: at line 1
Configuration information:
Server A and Server B OS Version/Kernal Information:
Oracle Linux Server release 5.8
x86_64
2.6.32-300.24.1.el5uek
Database Version, on all databases, is:
Oracle Database 11g Enterprise Edition
11.2.0.3.0 - 64bit
Remote Scheduler Agent version, on both servers is: 11.2.0.3.1
Here is the listener status on Server B for db2:
serverb $$ lsnrctl status listdb2
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 23-JUL-2013 11:39:27
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=***)))
STATUS of the LISTENER
[code]...
I have configured both servers with remote Scheduler agents and both databases have been configured and registered with the agents.
I have executed the shell script on Server B and it performs as expected.
I have the primary job calling the remote job, and that is performing as expected.
I have tested the connection from DB1 on Server A to DB2 on Server B with this
SQL> set serveroutput on
SQL> DECLARE
2 versionnum VARCHAR2(30);
3 BEGIN
4 versionnum := DBMS_SCHEDULER.GET_AGENT_VERSION('ServerB.someplace.net');
[code]...
and I have tested the connection from DB2 on Server B to DB1 on Server A with this
SQL> set serveroutput on
SQL> DECLARE
2 versionnum VARCHAR2(30);
3 BEGIN
4 versionnum := DBMS_SCHEDULER.GET_AGENT_VERSION('ServerA.someplace.net');
[code]...
I'm getting the error messaage:
Database Connection failure. Reason: java.sql.SQLException: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist SVR4 Error: 2: No such file or directory
I'm not an Oracle expert, but I have research a little and seems that the SID could be wrong or that the DB is down, in fact I have already checked trhe server but everything seems normal to me.
While after connecting to server via my userid( its an externally id) ,after setting ORACLE_HOME and SID, while entering sqlplus / command,its not connecting.Error am getting is:-
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
HP-UX Error: 22: Invalid argument
Attaching output session.
My application is using "Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production" and Oracle 11g client v11.1.0.6.0.My application server runs continuously and checks for new requests. But problem occurs when I do not send any request to my server for 40-45 minutes i.e. server is idle or doing nothing except checking new incoming requests for those 40-45 minutes. After that if I try to connect my server by sending some request, it shows following error message and my server crashes:
Message String: ORA-03135: connection lost contact
Process ID: 7586034
Session ID: 61
[URL]... says that session memory is maintained in the PGA (unlike shared server) and then gives a calculation for memory usage that I don't understand: it suggests that instead of there being one PGA per session, there is one PGA per pooled server plus a small allocation of 35k per session, but this is not what I see.
It's easy to demonstrate. As sys,
exec dbms_connection_pool.start_pool
and then launch any number of session with
sqlplus scott/tiger@127.0.0.1:1521/orcl:POOLED
and you'll see a process called Lnnn launched for each session:
[code]...
There is a mention of a process called the connection broker, but I can't see this in v$process.There is more detail in the OCI developers guide [URL]... which goes beyond my knowledge of application development.
How to find the sid from v$session of my current session.
I want to ask:
Let say I have open 10 TOAD session and only in one toad session i have fired a sql query ( the rest 9 session are just blank), then the rest 9 status are in active status. Now, how i can figure out which sid ( from v$session ) belongs to which session as all the 9 session having nothing to run.
Quote: My main intention is to find out the current session sid as soon as it make connection with DB.
Unable to connect to database getting below error
sqlplus sys/oracle@server_name/orcl
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 12 11:07:15 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12518: TNS:listener could not hand off client connection
Below is alertlog entry
Completed: alter database open
Thu Apr 04 17:06:19 2013
db_recovery_file_dest_size of 4096 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
[code]...
I have installed oracle 10g XE on my machine. And my machine's ip address is 10.10.50.50.
username:system
password:xxx
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.50.50)(PORT =1521))
[code]....
I was able to connect to the above server from my machine.But when i was trying to connect the above server from my neighbours system i am getting an error Network adapter could not establish the connection.
Note:when i ping the ip address 10.10.50.50 from my negihbours system in the command prompt
Reply from 10.10.50.50:bytes=32
Reply from 10.10.50.50:bytes=32
Reply from 10.10.50.50:bytes=32
Reply from 10.10.50.50:bytes=32
In my project a user has updated a column with wrong value which had caused some issues.
I wish to find the userid of person who did the update on the table.
There is no trigger on that table
I used the following queries but have not got success
select * from USER_TAB_modifications where table_name like '%XYZ%';
select * from USER_AUDIT_OBJECT ;
I WAS ABLE TO GET WHEN LAST UPDATE TOOK PLACE on table but not userid details
We have installed Oracle RAC 11gR2, installation was all successful.But i cannot see ASMSNMP user to login as ASM enterprise manager .If i tries to login as sys (even after assigning SYSASM role) he cannot login.
Quote:Set Oracle_sid=+ASM1
sqlplus / as sysasm
grant sysasm to sys;
conn sys/*** as sysasm
ORA-01031 insufficient privileges
there restrictions in number of defining role in oracle?
View 2 Replies View RelatedWhenever I create a table using login A, the table gets created successfully. But when I query the dba_objects, the object owner is different, login B. What might be the reason behind this?
View 9 Replies View RelatedGot following error while droping user
DB:9.2.0.8.0 OS:Windows 2003
SQL> drop user custom cascade;
drop user custom cascade
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-21700: object does not exist or is marked for delete
I need to ask about PGA memory. Is this memory for every user or every session
i.e. PGA 200M
I have 2 users with 300 connection with one of them. Is 200M for 300 connection or for every connect.
I need to create one to many user DB link in oracle 10g. Meaning I have a user A in database 1 and I want to access the objects from user B,C,D in database 2, how to create a public database link so that i can have this one to many user access?
View 8 Replies View RelatedIs there any default way to assign user roles to uses ?
Suppose I want assign to user different roles to different users on views, tables etc.
I wan to implement Access control list & Access request objects (ACL/ARO).
I want to drop some users which are no longer been used .What are the precautions i need to take before i drop users? I have taken logical backup (Export) of users i want to drop.Is there anything i missed out before i drop user?
View 4 Replies View RelatedI just create a user and tried to log in but it gives the following error, why?
SQL*Plus: Release 10.1.0.4.2 - Production on Tue Sep 27 10:57:55 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> create user user1 identified by user1;
User created.
SQL> conn user1
Enter password: *****
ERROR:
ORA-12560: TNS:protocol adapter error
Warning: You are no longer connected to ORACLE.
WHEN I CONNECT TO SCOTT OR ANY KIND OF USER (EXCLUDE SYS)I CONNECT EASILY BUT PROBLEM WITH SCOTT OR OTHER THEY CANNOT BE
SHUTDOWN THE DATABASE AT THAT TIME THE ERROR ARISES ARE
ORA-01031: insufficient privileges SO OUR DATABASE CANT BE SHUT IT DOWN.
I want whenever a user is created in database the server send me a mail about this.
View 3 Replies View Relatedlast two years i am using oracle 9i in windows 2003 server but now i installed oracle 10g on another server (PC) , i want to connect 9i to 10g with same database and user .
View 3 Replies View RelatedI have login through the sysdba and created dblink and modified the tnsnames.ora for necessary changes. And the it started working correctly and I can able to get the data by selecting it.But when I login with different user that is showing the following error.
ORA-12154: TNS:could not resolve the connect identifier specified
How to resolve this,is there any privileges or permission need to give to that user.
How to find the number of users logged, in a database level(Oracle), b'coz generally in OS level (Linux) , the command will be '$ users',
View 4 Replies View Related①SQL> SELECT OBJECT_ID FROM DBA_OBJECTS WHERE OBJECT_NAME='T2012';
OBJECT_ID
---------
57082
②SQL> SELECT HEADER_BLOCK,BLOCKS FROM DBA_SEGMENTS WHERE SEGMENT_NAME = 'T2012';
HEADER_BLOCK BLOCKS
------------- --------
683 8
③SQL> SELECT DBMS_ROWID.rowid_block_number(ROWID)USED_BLOCK_NUMBER FROM SCOTT.T2012;
USED_BLOCK_NUMBER
----------------
684
④SQL> SHUTDOWN IMMEDIATE;
⑤SQL> STARTUP;
⑥SQL> SELECT BLOCK#,CLASS# FROM V$BH WHERE OBJD = '57082';
no data found
⑦SQL> SELECT * FROM SCOTT.T2012;
ID
-----
1
⑧SQL> SELECT BLOCK#,CLASS# FROM V$BH WHERE OBJD='57082';
BLOCK# CLASS#
------- ----------
686 1
684 1
687 1
685 1
688 1
683 4
⑨SQL> SELECT EMPTY_BLOCKS FROM DBA_TABLES WHERE TABLE_NAME='T2012';
EMPTY_BLOCKS
------------
3
QUESTIONS ONE:
in the ⑧ step,why block#685,block#686,block#687,block#688 in the buffer cache after i query data from scott.T2012?
QUESTIONS TWO:
in the ⑨ step,what's the block number of the empty block?just like DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID).
When I created a new oracle database the port number was 1521 (default), but I want to change it to 1522.
View 4 Replies View Related
