i am trying to update below statement that has multiple rows but giving the error like :
update test t
set (t.org_id) =
(select o.org_id
from organisation o inner join test t
on (o.name=t.full_name
or o.name=t.chart_name))
error:- single return sub query return more value.
how to write update join query base on multi[ple ow.
I have a sql query as below :
select order_number,
(select decode(hcp.contact_point_purpose,'ABC',hcp.email_address,'CDE',hcp.email_address,null)
from hz_contact_points,
hz_parties hz
WHERE hz.party_id=hcp.owner_table_id) Email
FROM oe_order_headers_all h
WHERE h.order_number='102'
....................
..............
Actually the problem i am facing is the inner select query is returning multiple row , so my main query is erroring out, i need to capture the multiple row.
In the above example the inner decode statement returning two mail address, I need to capture that, but while executing the whole query it is erroring out as saying single query returns multiple values. capture multiple values
Attached query is running fine if inline view B (Marked in Comments) returning value. If inline view B returns NULL then it fails to return result. I want if Inline view B is returning NULL then it should pass ZERO to main query.
View 2 Replies View RelatedI have a table which lists previous jobs, whcih has monthto,yearto, monthfrom and year from fields. I am trying to find the most recent job (of which they might be multiple ending on the same month) Initially, i did the following:
ran a sub query to find the most recent (employee id, max (yearto * 12 + monthto), then another query where I got a list of the most recent jobs, and returned the first one using rownum = 1 (note this may be inconsistent between runs as thee rownum is calculcated before nay ordering clause. This worked, but i figured using the first function might be better as it gives an order
select employee_id from
(select employee_id
,max(NVL(yearto,0) *12 + NVL(monthto,1)) KEEP (DENSE_RANK FIRST ORDER BY emloyer) as latest
from employees
group by employee_id;
but this seems to return more than one entrty:
table date below:
drop table employee_list;
drop table employee_historic;
[code]...
What is the best way to return a single row, if the primary key is not available / applicable.
I have a dynamic query stored in a function that returns a customized SQL statement depending on the environment it is running in. I would like to create a Materialized View that uses this dynamic query.
View 1 Replies View RelatedI've just started with the Oracle SQL and come from a heavy MS SQL background and I understand that here are some natural differences in the syntax but I'm stumped as to why the following sql represents a problem:
update MASTERMICODES t1
set t1.TEMPTA = ( select t2.TAFCODE
from TA_FEATURES t2
where t2.FCODE = t1.FCODE
)
It returns Error report:
SQL Error: ORA-01427: single-row subquery returns more than one row
01427. 00000 - "single-row subquery returns more than one row"
*Cause:
*Action:
I want it to return more than one row...in fact I want it to make on all rows that have the same fcode between tables.
Im running the following query in DB - Prod2
select *
from t_act_rwrd_reimb_stay a
where reimbursed_amt < 0
and invoice_date = '01-JAN-1900'
and not exists ( select 'x' from t_act_rwrd_reimb_stay b
where a.GPM_ID_STAY = b.GPM_ID_STAY
and reimbursed_amt > 0 )
The above table t_act_rwrd_reimb_stay --> is from a view on the database Prod2 and this view is pulling the data from the database prod1 via dblink
When I run the same query on Prod1 it returns 3 rows. Is there any reason this is not fetching data on prod2 view? or whatz wrong with the above query
or for example if I run the above query as follows with the dblink "@prod1" it returns the data properly
select *
from t_act_rwrd_reimb_stay@Prod1 a
where reimbursed_amt < 0
and invoice_date = '01-JAN-1900'
and not exists ( select 'x' from t_act_rwrd_reimb_stay@prod1 b
where a.GPM_ID_STAY = b.GPM_ID_STAY
and reimbursed_amt > 0 )
I'm trying to build a dynamic sql inside an Oracle procedure, and return it as a SYS_REFCURSOR to ADO.NET using ODP.NET in Oracle 11R2. Below is my table:
CREATE TABLE "TFWDB_ENTIDADE"
(
"CD_ENTIDADE" NUMBER(10,0) NOT NULL,
"DC_ENTIDADE" VARCHAR2(100 BYTE) NOT NULL,
"NM_ENTIDADE" VARCHAR2(255 BYTE) NOT NULL,
"CD_TIPO" NUMBER(5,0) NOT NULL,
"ID_STATUS" CHAR(1 BYTE) DEFAULT ('1') NOT NULL,
CONSTRAINT "PKFWDB_ENTIDADE" PRIMARY KEY ("CD_ENTIDADE"),
CONSTRAINT "CHFWDB_ENTIDADE" CHECK (ID_STATUS IN ('0', '1'))
);
Below is the procedure I build to SELECT it:
create or replace procedure spfwdb_sl_entidade_1(
p_cd_entidade in number,
p_dc_entidade in varchar2,
p_nm_entidade in varchar2,
p_cd_tipo in number,
p_id_status in char,
[code]........
I'm calling this code from C#, and I get an empty Result Set. What am I doing wrong? Can I output the dynamic sys_refcursor that I created? Below is my C# code using ODP.NET:
string pConnectionString = "Data Source=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ORASERVER)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=ORASID)));User Id=user;Password=password;";
OracleConnection oConn = new OracleConnection(pConnectionString);
oConn.Open();
string pNomeProc = "spfwdb_sl_entidade_1";
[code]........
below query is returning two rows.The thing now happening is the query is returning the output for both the case statements.But what is need only when the first case staement is NULL then it should go for second case.
SELECT DISTINCT CASE
WHEN esc.x1 = Substr(inp.y, 0, 3)
AND esc.x2 = Substr(inp.y, 4, 2)THEN esc.cc
WHEN esc.mcc = Substr(inp.y, 0, 3)
AND esc.mnc = Substr(inp.y, 4, 3)THEN esc.cc
[code]....
I tried using rownum=1 but it filters out valid records.correcting the above query so that if the first case is null then only it should go for second case.
I have the following query:
SELECT
d_dtm,
BTS_ID,
CASE WHEN D_DTM = (D_DTM-24/24)
THEN sum(V_ATT_CNT)
[Code]....
But it is not returning any results because of the "having" clause. I know it should return results because all I want it to do is in one column have the V_ATT for the current time period, and in the 2nd column, have the V_ATT 24 hours ago. I've checked the data and I should get results back but can't seem to figure out why this is not working...
These are the tables I'm working with:
SQL> desc custinfo;
Name Null? Type
----------------------------------------- -------- ----------------------------
CUSTID VARCHAR2(4)
CUSTNAME VARCHAR2(18)
CUSTADR VARCHAR2(12)
CUSTCITY VARCHAR2(10)
CUSTSTATE CHAR(2)
CUSTZIP VARCHAR2(5)
CAPACITY NUMBER(3)
HOUSECODE VARCHAR2(2)
[code]...
I don't understand why the custid is the same for each customer, and why it's selecting every customer and not just those with more than 150 gallons ordered.
For this one use the oil tables that you set up and use a subquery. Select the minimum average fall use from the house table. Then show all customers whose number of gallons delivered times two is greater than the minimum.
I have this procedure
POSTCODE_TO_LAT_LNG_GM_API(postcode IN VARCHAR2, lat OUT NUMBER, p_long OUT NUMBER)
to convert a postcode into lat/long values. I then need to add them to the returned SQL statement so I used the string concat operator || with to_char but it comes up with this error when I try to apply the changes: Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the ''generic column'' checkbox below the region source to proceed without parsing.
ORA-00936: missing expressionh4.
h4. btw I'm using Oracle 11g release 11.2.0.3.0 and Apex version 4.1.1.00.23
DECLARE
l_lat NUMBER;
l_lng NUMBER;
l_SDO_GEOMETRY SDO_GEOMETRY;
[code]...
work_order unitid frommi tomi frompm topm
2666054111 06-154 77.000 85.000 77.370 null
2666054111 06-154 77.000 85.000 null 85.370
2666054111 06-154 77.000 85.000 null null
I used select distinct(work_order) to come up with the three different possible scenarios the problem is that i need all this information on a single row
work_order unitid frommi tomi frompm topm
2666054111 06-154 77.000 85.000 77.370 85.370
this is a conversion for distance. when i get this to work properly, it will generate reports on thousands of work orders with their converted distance markers.
is there a way to return the next 7 dates just using a query... for example, I need a query that returns:
select (I don't know that put here) from dual
Date
2012-10-05
2012-10-06
2012-10-07
2012-10-08
2012-10-09
2012-10-10
2012-10-11
If possible, I would like to know if there's a way to pass a date and based on it, the query returns the next 7 dates based on the passed date... for example:
select (I don't know that put here) from dual where date > '2012-10-15'
Date
2012-10-16
2012-10-17
2012-10-18
2012-10-19
2012-10-20
2012-10-21
2012-10-22
I've stucked with a query. I have a table that i store the IDs of logically equal records.
For example;
A = B
B = C
X = Y
Z = Y
My query must return all equivalent records. If you call the query with parameter 'A', the result set must contain B and C. And if you call the query with parameter 'Y', the result set will contain X AND Z. I have thought that i can write the query wity using start with connect by statement. But the query does not work as i expected. Here is my code and sample data:
create table temptable (ID1 number,ID2 number);/
insert into temptable values(11,12);/
insert into temptable values(12,13);/
insert into temptable values(13,14);/
insert into temptable values(13,15);/
SELECT distinct ID1 from
(
SELECT * FROM temptable
START WITH ID1 = 13 OR ID2 = 13
CONNECT BY NOCYCLE
(
(PRIOR ID1 = ID1) OR
(PRIOR ID1 = ID2) OR
(PRIOR ID2 = ID1) OR
(PRIOR ID2 = ID2))
) WHERE ID1 <> 13
union
[code]....
When i call the query with parameter 13, i'm expecting to get 11,12,14,15. But it returns only 12,14 and 15.
I have a view base on this query returned more rows returned.
select *
From (
Select c_code ,
from_date,
c_range ,
[code].........
I am Having below query which is having total 664 records and for WHERE Clause (accountno ='13987135') it is having 3 records but when i am taking count it is returning 3 at first time and again returning 4 every time from then onwords.
SELECT Count(*) cnt FROM(SELECT rownum rnum,
secno,
positionname,
tradingsymbol,
cusipcum,
businessclientname,
businessclientid,
[code].....
I have not found a solution for this, but it could be that I don't know what to search for.
I need to edit the following statement:
SELECT a.id||a.name||a.amount*2 as transaction
FROM a
WHERE a.amount IN (500, 1000)
To return:
TRANSACTION
------------------------------------
123SMITH1000
123SMITHADJUSTED AMOUNT PER X
456JONES2000
456JONESADJUSTED AMOUNT PER X
The returned rows need to be in this format to be executed in another database.
Can this be done?
I am new to SQL and I am just wondering if there is a solution to a problem I am having.I am using the piece of code below.Essentially what I am doing is selecting a field from a table and ordering that field in descending order. Using the Row_Number feature I then specify which Row I want to return.
Every day the row I will want is the Count of field1 for that day divided by 100 minus 1. This returns a single value of field1 and a single value of R.
I perform this operation every day. The only fields I change every day are the dates and the value of R. I use a seperate piece of SQL code to calculate R each day.
My problem is I have to often populate historical tables with this data. I can only run the code once for each day and for each value of R. Is there anyway I can alter this code such that it can return multiple values of field1 over several dates?The only way I can think of is to repeat the code multiple times using UNION but I am hoping there is a more efficient way.
SELECT *
FROM (SELECT Field1,
ROW_NUMBER() OVER (ORDER BY field1 desc ) R
FROM table
WHERE date >= TO_DATE ('20110215', 'YYYYMMDD')
AND date < TO_DATE ('20110216', 'YYYYMMDD')
)
WHERE R = 1227
--Note: 1227 = (count(field1)/100)-1
I have this query that returns results that contain duplicates(somewhat). I only want either the FIRST or LAST (either one is fine). Here is the query:
select unique PLLA.attribute4, PLA.item_description from po_lines_all PLA, po_line_locations_all PLLA
where PLLA.po_line_id = PLA.po_line_id
and PLLA.attribute4 is not null
So my output is something like this:
RCE12 This is an item for AUL1
RCE13 This is an item for PWEILL
RCE14 This is an item for AUL1
I just want either the RCE12 or RCE14 record and not both since they both have the same description.
I need to get the super set(parent) record from a relational table. Following is the structure of the table,
create table relation (data_field1 number(20),data_field2 number(20),data_field3 number(20),
primary key (data_field1,data_field2,data_field3) );
insert into relation (data_field1, data_field2, data_field3) values (-10,123,334);
insert into relation (data_field1, data_field2, data_field3) values (200,123,334);
insert into relation (data_field1, data_field2, data_field3) values (300,123,334);
insert into relation (data_field1, data_field2, data_field3) values (400,123,334);
[code].....
Here '-10' will be considered as parent(super set) for all other values. If i have records like below,
-10 200 300
100 200 300
123 200 300
521 201 300
Output should only contain two rows. A super set row and other distinct row(second column value is not equivalent to super set).
Having following table:
UserID REC_TYP REC_CD
12345 'OFFR' 12
23456 'MSG' 13
I'd like to construct the query which in this particular case would return the REC_CD as 'Record_ID' for REC_TYP='OFFR' where USERID=? (always fetched by the application) and if such USER_ID doesn't exists (for the particular REC_TYP of course) to return string or any other value. e.g. The result for this query in case of user_id 23456 = would be "doesn't exist" or sth for instance 'FALSE' and for 123456 it would be '12'
I have a select query select userid from user_tbl where name='hhh';
I want to return 0 when no records are fetched and I want to handle both teh cases in a single query other than proc or function.
I have a table with multiple rows for the KEY attribute(its not a primary key) and a Rank for each row.
I want a query which fetches one row per KEY attribute.The row with lesser Rank should be considered. But in-case if the value is null for any column the value for next Rank should be considered.
WITH TMP_TBL AS
(
SELECT * FROM (
SELECT 'A' DUN,'1' RNK,'A21' col1,NULL col2,'A41' col3,NULL col4 FROM dual
UNION ALL
SELECT 'A','2','A122','A23',NULL,NULL FROM dual
UNION ALL
SELECT 'A','3','A32','A33',NULL,'A35' FROM dual
[code].......
DUN is the KEY attribute . RNK is the Rank for each Row. COL1... COL4 are data attributes
The results I am expecting is
DUNCOL1 COL2 COL3 COL4
AA21 A23 A41 A35
BB12 B23 B15
CC12 C13 C33 C14
I want this to be done with SQL only. So I tried various ways but none were successful.Finally I created a Multi Row function row_nvl and it worked.
SELECT DUN,
row_nvl(rownvl_param_type(RNK,col1)),
row_nvl(rownvl_param_type(RNK,col2)),
row_nvl(rownvl_param_type(RNK,col3)),
row_nvl(rownvl_param_type(RNK,col4))
FROM TMP_TBL
GROUP BY DUN
But I don't think my manager will allow me to deploy a Multi Row function .
I have a need to query a real time production database to return a set of results that spans a three day period. When the three days are consecutive it's easy but sometimes there is a 1 or two day gap between the days. For example I'm querying results from a group of people that work between Tuesday and Saturday. On a Wednesday I need t produce a set of results that spans Tuesday of the current week, and Saturday and Friday of the previous week; on Thursday I need to produce a set of results that that spans Wednesday and Tuesday of the current week and Saturday of the previous week.I'm using SQL Developer to execute the code.
View 7 Replies View Relatedmembers table
mem_id,registrationdate and some other details
sales table
mem_id,purchasedate and some details
i want a query which will return the turnout for each day i.e. purchasedate and number of new members who made purchase on a particular date.
I have created domain indexes on text columns of a materialised view to use "contains" clause when searching for data. The select query with "contains" clause does not return any records, however I was able to retrive data using via regular query using a like search.
-> will exec ctx_ddl.sync_index('index_name')'resolve my problem?
-> since the view is a materialized view, how can i make sure that the latest data added are also picked up?
The below query takes more than 30 minutes to return data.All the objects used are views. There is no direct reference to any table.The views with _mnth_ have data for 7 distinct months. The base table for all the views have a composite PK on the columns AR_ID (or ACCT_AR_ID),MSRMNT_PRD_ID
I need the order by, as the query is part of informatica code, and the order by works in the further processing.
SELECT ac.ar_id AS acct_ar_id, m.msrmnt_prd_dt AS msrmnt_prd_dt
--removed the rest of column list to reduce size of code.
FROM edxf.ar_rsrv_mnth_v ac,
edxf.crdt_acct_mnth_v c,
edxf.crdt_acct_v ca,
(SELECT msrmnt_prd_id, msrmnt_prd_dt
FROM edxf.msrmnt_prd_v
WHERE msrmnt_prd_id =
[code]....
Also, the count of data in the views is as below.
ViewTotal countCount for 1 msrmnt_prd_id
---------------------------------------------------------
ar_rsrv_mnth_v1841892281945
crdt_acct_mnth_v664941457087369
crdt_acct_v12258728NA
The below query is taking more than 5minutes to return the data for any criteria.The big tables are
SECURITY_POSITION_SUMMARY -- 60Million
WEB_TEAM_X_ACCOUNT_BM -- 26Million
and the rest of those are small tables..All the indexes are in place and I have tried with few hints but this query is slow.
WITH REPS
AS (SELECT DISTINCT REP_SET.FILTER_TOKEN
FROM (SELECT /*+ INDEX (wdsd WEBDATASETDTL_PK_TEAM) */
DISTINCT
WDSD.DATA_SETTING_ID, WDSD.FILTER_TOKEN
FROM WEB_DATA_SETTING_DETAIL WDSD,
[code]....
In Apex 4.2, the item validation of "Function Returning Boolean" and "Function Returning Error Text"; They seam to be backwards.
Is there a simple statement that can be used to fix this in the apex dictionary?