I need to pick a value based on range like if the range is as below
[code]
if value =2000 then its 2000
elsif value >=2001 and value <=2499 it should be 2000
elsif value =2500 then 2500
elsif value >=2501 and value <=2999 it should be 2500
elsif value = 3000 then it should be 3000
[code]
Like this i need to pick a value by hardcoding this range and this look cumbersome in my program , is there a simple way to substitute this entire thing by passing one single value and getting one single value using a command or builtin.
i have to pick single value from the given range based on value entered by user, for example if user enter the length 2499 it should be considered as 2000 if he enters 2000 its 2000 or he enters 2501 it will return 2500 , i have written a huge if condition for this purpose in my program which looks very cumbersome,is there a simple to do this other than this method.
the code is as below.
[CODE] IF ( :CSDO_STORE_RECD_LENGTH - SUBSTR(:CSDO_STORE_RECD_LENGTH,(LENGTH(:CSDO_STORE_RECD_LENGTH)-1),LENGTH(:CSDO_STORE_RECD_LENGTH))) =2000 THEN M_RCVD_LENGTH := 2000; ELSIF
I got a situation to develop a complex query. Here is the scenario. I have to pick all the continues range of values into one bundle. like in following example, rows having values between 20 to 25 should have one bunch and 27 to 28 should have another as there is no from or to value from 25 to 28. with q1 ( select 20 as Frm, 25 as tto from dualunion allselect 20 as Frm, 21 as tto from dualunion allselect 20 as Frm, 22 as tto from dualunion allselect 20 as Frm, 20 as tto from dualunion allselect 21 as Frm, 22 as tto from dualunion allselect 28 as Frm, 28 as tto from dualunion allselect 27 as Frm, 28 as tto from dual)select * from q1;
Our term (strm) is dictated by the term_begin_dt and term_end_dt dates but I want to keep selecting that term until 1 week before the next term opens and then switch to that term.
Basically, I don't want any gaps between a term.
Output:
select strm when sysdate is between term_begin_dt and term_end_dt (strm would equal 3943) select strm until 1 week before the start of the next term (4027) (strm would equal 3943) select strm when 1 week before term_begin_dt (strm would equal 4027)
Repeat for the next term and so on 12/16/2011 select strm from term where trunc(sysdate) between trunc(term_begin_dt) and trunc(term_end_dt)
Output: 3943 12/17/2011 - 01/01/2012
select strm from term where ?
Output: 3943
01/02/2012 - 5/4/2012 select strm from term where ?
Output: 4027
Repeat.
Test Case:
CREATE TABLE TERM ( STRM VARCHAR2(4 BYTE), DESCR VARCHAR2(20 BYTE), TERM_BEGIN_DT DATE, TERM_END_DT DATE )
Insert into TERM (STRM, DESCR, TERM_BEGIN_DT, TERM_END_DT) Values ('3943', '2011 Fall Semester', TO_DATE('08/22/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/16/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into TERM [code].....
I have following requirement. Let say i have to generate a range based on "start number" and "end number" dynamically.Some kind of hash buckets.
e.g Start Number : 1 and End Number : 1001.
Also i want to divide that range based on some dynamic value like for above example 10 ranges of 100 each. and both 1 and 1001 should be included only once and the next row start number cannot be same as previous row end number.
Means
Range 1 1 -101 Range 2 102-200 Range 3 201-300 ... Range 10 901-1001
Is there any way of doing it automatically. I tried with Model clause. it works fine for even cases but for odd i have issues also when i take small start and end number i get an error.
SELECT case when ranges=1 then ranges else ranges+1 end Start_Id, ranges+round((1001-1)/10) End_Id from (
[Code].....
I want this to be generic for any values here 1 is Start Number 1001 is end number and 10 is the bucket. I need these parameters dynamic and want's the same kind of results for any values.
formatting the data.I want to group the below table data based on the Grade column for a header_data with start_time and end_time displayed in range. I was trying with group by, partitions etc but no luck. I use version 10gr2.
What I require is pick up the data from table1 and for each row in table1, check the corresponding column to see if null. If null create a counter and add 1 to it.
I would only check for 1 record at a time in table2 (ID is input parameter in pl/sql) In other words, if my ID is 1, my count should be 1 (since COLOr is null in table2 for id=1 and color is a row in table1) if my id is 2, count is 2 (ht and width are NULL and are both separate rows in table1) if id is 3, count=0 since all fields have data even though some of these columsn exists as rows in table1.
Am working on a workbook to count the number of enrolments and withdrawals in the program. My data looks like this
name semester status year A 1 enrol 2010 A 2 withdraw 2010 A 3 enrol 2010 B 1 enrol 2010 B 2 withdraw 2010
I want to count their latest status only. It should come up with Total Enrol - 2 Total Withdrawn - 1
For total Withdrawn, I tried 'rank' and filter to equals 1 but it does not allow me. Is there any way to have this work? Here's my calculation:(decode((FIRST_VALUE(status) OVER(PARTITION BY year, name ORDER BY semester DESC)),'withdraw', name)) It tells me that 'Aggregation of Analytic function not allowed'
Reg. Area Age <=19 20 <= Age <= 24 25 <=Age <= 29 Total No. of Voters xxxx 10 15 7 32 yyyy 5 7 3 15
I have work out a script but the age is not in a range
select * FROM (select rgs_id_reg_area, count(decode(fbd_age,19,fbd_age)) Age19, count(decode(fbd_age,20,fbd_age)) Age20 FROM rubyvoterstat where vote ='Y' GROUP by rgs_id_reg_area) order by rgs_id_reg_area
1) Alter table STS.DNA_ACCESSION add PARTITION DNA_ACC_P143 VALUES LESS THAN (286000000); ORA-14074: partition bound must collate higher than that of the last partition
2) ALTER TABLE STS_RO.DNA_ACCESSION SPLIT PARTITION DNA_ACC_P999 AT VALUES LESS THAN (286000000) INTO (PARTITION DNA_ACC_P143,
I have table :TABLE_X and want to select some data locate into specific range of Day/Month. But so far i couldn't find out the way to.
For example, i want to select people born within specific range of date(range : sysdate to (sysdate+7months ahead) Year here should not be consider, only the day and month.
e.g. a range could be from today:Sept,20 to Apr,18.
so what i was trying is to select doing the following.
select TABLE_X_ID, TABLE_X_BIRTH_DATE from TABLE_X where to_date(TABLE_X_BIRTH_DATE, 'DD/MM') between to_date (to_char(SYSDATE, 'DD/MM'), 'DD/MM') and to_date (to_char(SYSDATE+210, 'DD/MM'), 'DD/MM')
first am not sure if BETWEEN & AND will work for this case, bt it was the most logical way i could think about to get such range.
I am trying to create a SQL query which will check that various postcode formats are valid, but I am having trouble getting oracle sql to check for values within ranges - for example the following returns no rows, even though most of the postcodes I am dealing with start with 'P'.
select postcode from mytable.addresses where postcode like '[N-R]%' ;
This data needs to be represented in a SQL report as below. The Date Range in the below i.e., Starts with FEB, by checking against the sysdate.. That is from sysdate it will display the Quarter data for 4 months as below.
Currently I am using a procedural logic to populate data into a different table in the above format. Is there any method to do with a single SQL using PIVOT. Below given is the table structure and Insert scripts.
I have a table and want to calculate the stdev of a parameter over a rolling window (past 250 records, sorted by ID): ... stddev(parameter) over (order by ID range between 250 preceding and current row) as SD ...
I don't get any error, but if I calculate the same in excel (=STDEV(250 row range)), it seems that this code does not the same. Is there something wrong with the 250 row rolling window?
I have a field called percentage , where user doesnt want to enter any data , instead he wants a poplist like 0-100 when he clik the range will come as 0-10,10-20 and so on like 90-100 how i can do it he will increase and decrease it.
I want my user to be restricted for entering duplicate time within two times.
create table asd(dt_frm date,dt_to date);
insert into asd VALUES(to_date('01-04-2012 08:00','dd-mm-yyyy hh24:mi'),to_date('01-04-2012 10:00','dd-mm-yyyy hh24:mi')); insert into asd VALUES(to_date('01-04-2012 09:00','dd-mm-yyyy hh24:mi'),to_date('01-04-2012 11:00','dd-mm-yyyy hh24:mi'));
now in the second insertion I want to alert the entry user that 9am already falls in the saved record which is 8am to 10am and so that this record can't be saved.
I have a table partitioned by Range and subparitioned by hash.
i am issuing the following query .Bcos of security purposes i cannot post the full query.
Select <most of the columns> FROM qosTesthr PARTITION(PARTITION_ON_2011_11_17) WHERE starttime BETWEEN to_date('1111170000', 'yymmddHH24mi') AND to_date('1111172359', 'yymmddHH24mi')
Performance while using the index is very very slow.Is there any way without using the index and just the partition full scan can be forced by using some hint..
write the query for the following requirement.I need to generate the records for the range (Difference between From_val & to_val) ) for each ID
create table test_base(id varchar2(20) , from_val number , to_val number);
insert all into test_base values ('A', 6,10) into test_base values ('B', 22,30) into test_base values ('C', 123,130) into test_base values ('D', 852,860) into test_base values ('E', 30 ,30) select * from dual ; [code]....
No need to generate any thing for E as the difference is equal to Zero
