I am trying to create a new index on large table of size around 100GB. but i am getting the following error:
ORA-1652: unable to extend temp segment by 128 in tablespace TEMP.
temp tablespace size is : 20 GB.
does it mean that the whole index will be created at temp tablspace first?
difference between the ways we create Reverse Key Index on the table.The two ways are as below:
1) CREATE INDEX <Index_Name> ON <Table_Name>(<Column_Name) REVERSE ;
2) CREATE INDEX <Index_Name> ON<Table_Name>(REVERSE(<Column_Name>)) ;
Which one is the appropraite one.
Are both going to act in the same way.
I created index in both ways one by one on the table.But when I fire the select statement against the same table, The explain plan doesn't show any cost and it shows the full table scan in both ways.The select statement used is as below...I want to compare the column with string RBO(i.e('RBO%') at the start.
SELECT *
FROM <Table_Name>
WHERE REVERSE (<Column_Name>) LIKE '%OBR' ;
The select statement is giving me the correct result. Only the explain plan is showing Full Table Scan.can we use this reverse with IN operator also in the same way by reversing the values.
I use Oracle 10.0.2.0.1.If I create a table with constraint key; after that I create an unique index key, I got an error. Does it mean when I create a table with constraint the unique index are automatically created and I could not create index key as I did as below?
create table test_const(ename varchar2(50) not null,
key_num number not null,
descr varchar2(100),
constraint constraint_test_const unique (ename, key_num));
create unique index test_const_idx on test_const
(
"ENAME","KEY_NUM"
)
tablespace tmp_data;
Error report: SQL Error: ORA-01408: such column list already indexed 01408. 00000 - "such column list already indexed" added [pre] tags by Sriram
Is it a possible to create table using clause below together with index ?
create table the_table
as
select col1, col2 from table2
I got procedure which create a table in the schema B. The procedure is called from schema A. But when I write into procedure query for create index
then I got a error:
ORA-01031: insufficient privileges when
...executing
Therefore I think about to create table together with index.
begin
B.proc.cre_table;
end;
While exporting on 11g xe on windows 32, i got messageORA-31626: job does not existORA-31633: unable to create master table
"System.Sys_export_schema_06"ORA-06512: at "SYS.DBMS_SYS_ERROR", LINE 95ORA-06512: at "SYS.KUPV$FT", line 1020ORA-01658:
unable to create INITIAL EXTENT FOR segment in tablespace SYSTEM I checked and found there is no pace in table space 600(allocated) 600(used mb) 0(free mb) 1(used) Q1) Is there any table which i can empty to free some space in system schema.Q2) Is there any way to shift some space from other table space to system becuse i have free space inother table space.i could find many segments of system table space, can i delete few of them, if they are not used ?
Can i send a large file( over 1 million) as email attachment as .CSV file...?
I have a requirement to send a large file ".CSV" when the procedure / package is invoked as email attachment. The data in the CSV file is pulled from a table (as below).
(1) I tried below code to execute "send_email" which is uses utility UTL_SMTP. It is working fine with
100000 records and getting an email attachment with .csv
(2) If more 100000 i am not getting any email / attachment.
I am looking forward to send a huge data like 1 million.
>>>>>>>>>>>>>>>>>>>>>
DECLARE
l_clob CLOB;
l_attach_text VARCHAR2 (32767);
l_attach_text_h VARCHAR2 (32767);
Cursor c1 is
SELECT LOCATION,PARTY_NAME,ADDRESS1,CITY,STATE_PROV,COUNTRY,POSTAL_CODE FROM emp_table;
[code].......
Can we create non-cluster index on a clustered index?
View 5 Replies View RelatedCreate small functional indexes for special cases in very large tables.
When there is a column having one values in 99% records and another values that have to be search for, it is possible to create an index using null value. Index will be small and the rebuild fast.
Example
create index vh_tst_decode_ind_if1 on vh_tst_decode_ind
(decode(S,'I','I',null),style)
It is possible to do index more selective when the key is updated and there are many records to create more levels in b-tree.
create index vh_tst_decode_ind_if3 on vh_tst_decode_ind
(decode(S,'I','I',null),
decode(S,'I',style,null)
)
To access the record can by like:
SQL> select --+ index(vh_tst_decode_ind_if3)
2 style ,count(*)
3 from vh_tst_decode_ind
4 where
5 decode(S,'I','I',null)='I'
6 group by style
7 ;
[code]....
Let's consider such table that all rows fit into single block:
SQL> create table test as select rownum id, '$'||rownum name from dual connect by level <= 530;
Table created.
SQL> create index i_test on test(id);
Index created.
SQL>
SQL> begin
[code].....
why does approach with full scan take longer even if table occupies only one data block? PS. 11gR2
I have a huge table (about 60 gb) partition over range. The index on this table is global index created on 4 columns together. I have a query which is running very slowly. The explain plan is showing the use of this global index.Explain plan is not showing pstart and pend because the index is global.
View 6 Replies View RelatedHow to force an index if the table not using the index?
View 10 Replies View RelatedWe met unable to extend index exception.I have executed below mentioned query.
ERROR:ORA-01654: index
(128, tablespace USERS) You can not extend the OMS_SG_IT.TRN_BD_MNTHLY_OCF_SLT_PKC.
QUERY:
select db.FILE_NAME,
db.AUTOEXTENSIBLE,
db.INCREMENT_BY,
db.USER_BLOCKS,
[code]...
RESULT:
/u01/app/oracle/oradata/SCSKTRA/users01.dbf
YES
5
3872
65536
(null)
LOCAL
ANOTHER QUERY:
select tablespace_name,file_name,bytes/1024/1024 from dba_data_files where tablespace_name='USERS';
RESULT:
USERS
/u01/app/oracle/oradata/SCSKTRA/users01.dbf
31.25
Now what i have to do...
I want to add column to table which has huge amount of data and fill with data from another table. What is the best way to do it? Is it faster to use CTAS instead of ALTER TABLE ADD COLUMN?
View 2 Replies View RelatedI need to dump the contents of a very large table into text files for archiving as we retire this old DB. The table has about 16 million rows, and a few of the columns are up to 4000 characters wide (varchar2(40000)). I've got 2 problems:
1) How can I select records that occur in a certain month of a year (there is a date column) and put the selected records into a file?
2) I don't have access to the server OS, so UTL_FILE is not possible. The output is also so large that I'm having trouble with the DBMS_OUTPUT.PUT_LINE.
I'm trying to get the first block of the IF working first, so the rest is just placeholders.
DECLARE
v_mm number (2);
v_yyyy number (4);
min_mm number (2);
min_yyyy number (4);
max_mm number (2);
max_yyyy number (4);
min_date date;
[code]....
i have three tables and all of these tables have around 30L records.
Using join i am retrieving records from these tables but it is taking much more time to get output.
Partition can improve performance?
How to estimate next extent size for very large table? What should I take into account? Is there any formula for that?
View 4 Replies View RelatedI have two large tables(rptbody and rpthead) which has over millions or even more records. Below is the table schema
describe rpthead
Name Null Type
--------------------------- -------- -------------
RPTNO NOT NULL NUMBER
RPTDATE NOT NULL DATE
RPTD_BY NOT NULL VARCHAR2(25)
PRODUCT_ID NOT NULL NUMBER
[code]...
What I want is getting all data if the referenced RPTNO belongs to a particular product_id from rptbody table, here's the sql
SELECT t0.LINENO, t0.COMMENTS, t0.RPTNO, t0.UPD_DATE
FROM RPTBODY t0
WHERE
(
t0.RPTNO IN
(
SELECT t1.RPTNO FROM RPTHEAD t1 where t1.PRODUCT_ID IN ('4647')
)
)
ORDER BY t0.LINENO
Since the result set is pretty large, so my application(think it as c couple of jobs, each job should be finished in a time window) can only process a subset of all data, so I need pagination so that the next job can continue the processing until all data is processed, below is the SQL with pagination
select * from (
select a.*, ROWNUM rnum from
(
SELECT t0.LINENO, t0.COMMENTS, t0.RPTNO, t0.UPD_DATE
FROM RPTBODY t0
WHERE
(
[code]....
As you can see each query will take 100 rows from the db. The problem for now is that the query taking too much of time(10+ mins), I know the slowness is due to "ORDER BY t0.LINENO", but it's required for pagination.
Consider tables A,B,C,D,E,F. all are having 100000++ records Tables B,C,D are dependent on table A (with foreign key constraint). When I am deleting records from all tables, table B,C,D are taking max 30-40 seconds while table A is taking 30-40 mins. All tables are having indexes.
Method I have used:
1. Created Temp table
2. then deleted all records from B,C,D,E,F for all records in temp table for limit of 500.
delete from B where exists (select 1 from temp where b.col1=temp.col1);
3. Why it is taking too much time for deleting records in table A.
Is there any thing that during deleting data from such master table, it is referring to all dependent tables even if dependent data is not present ?
I am working with an online application with the database in Oracle 10G. We have a table with 10 million rows and this table is subjected to grow in future also. Moreover we cannot archive some of these rows as these records are required for referencing.
We have all necessary indexes on the table but querying this table takes a lot of time especially when it is joined with other tables. some methods with which I can manage this table in a better way so that queries joining this table would execute faster..
SELECT
TAB1.C6,
TAB1.C8,
TAB1.C10,
TAB3.C4,
[code]....
i want to create a bitmap index,but getting the error shown below..i created primary key on column dname of dept and unique constraint on empno of emp.
SQL> create bitmap index bindx on dept d(d.dname) from emp e,dept d where e.deptno=d.deptno;
create bitmap index bindx on dept d(d.dname) from emp e,dept d where e.deptno=d.deptno
*
ERROR at line 1:
ORA-25954: missing primary key or unique constraint on dimension
We have two databases running on 10.2.0.4 and 9.2.0.8. Both are having the same unpartitioned table of size 80G. I am exporting the table on 10g by using parallel=8 and dumpfile with %U option. That took around 4 hours to export the table.
And on 9.2.0.8, i am exporting using below parameters, taking around 5 hours.
buffer=2000000
recordlength=64000
options i can try to speed up the export in both versions.
I have a large table and want to calculate just a few values. Therefore, I don't want to create a new table, I want to update the table. Here an example:
I want to calculate the VALUE_LAG with ID = 4 only (-> two values).
create table zTEST
( PRODUCT number,
ID number,
VALUE number,
VALUE_L1 number );
[Code]..
I tried this, but obviously, windows functions are not allowed in the update statement.
update zTEST
set VALUE_L1 = lag(VALUE) over (partition by PRODUCT, order by ID)
where ID = 4
How can I do this?
I have a query on , how to view the sample data from a very table which is large in size ( more than 10 million ).
I just need to see some sample data from a large table ( to see what kind of data which is application related ).
My question is :
Select *
from Sample_table
where rownum < 10
is this a Good way to view the sample data ?
I have understanidng that the rownum will be assigined to the rows once all the rows are reteived.
So what is the best way to view ?..I am not sure of any condition to put in the intial time of querying.
I am searching for a decent method / example code to subdivide a large table (into a global temp table (GTT) for further processing) based on a list of numeric/alphanumeric which is the resultset from a view.
I am groping with the following strategy in PL/SQL:
1 -- set up cursor, execute the view (so I have the list of identifiers)
2 -- create a second cursor (or loop?) which: accepts each of the identifiers in turn executes a query (EXECUTE IMMEDIATE?) on the larger table INSERTs (or appends?) each resultset into the GTT
3 -- Then the GTT contains just the requires subset of the larger table for further processing and eventual import into iReport for reporting.
GTT is defined and ready to go, the larger table contains approx 40,000 rows and I need to extract a dozen subsets or so which add up to approx 1000 rows.
At moment we use range-hash partitioning of a large dimension table (dimension model warehouse) table with 2 levels - range partitioned on columns only available at bottom level of hierarchy - date and issue_id.
Result is a partition with null value - assume would get a null partition in large fact table if was partitioned with reference to the large dimension.Large fact table similarly partitioned date range-hash local bitmap indexes
Suggested to use would get automatic partition-wise joins if used reference partitioningWould have thought would get that with range-hash on both dimension.
How to create index on materialized view which is refreshed daily basis.
View 3 Replies View RelatedI am going through this scenario:
* 35 | ID TABLE ACCESS BY INDEX ROW | S_ORG_EXT | 3064K| 2472M| | 1 (0)| 00:00:01 |
| 36 | INDEX FULL SCAN | S_ORG_EXT_U1 | 14 | | | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
---------------------------------------------------
35 - filter("T2"."ACCNT_FLG"<>'N' AND ("T2"."INT_ORG_FLG"<>'Y' OR "T2"."PRTNR_FLG"<>'N'))
This unselective index scan on step 36 of the explain is returning 14 rows but optimizer is selecting 3064 K rows from the table .
I tried creating combined index on all 3 columns mentioned in the predicates for 35th step , but that is not utilized .
how to index this whole expression ::--
(ACCNT_FLG<>'N' AND (INT_ORG_FLG<>'Y' OR PRTNR_FLG<>'N'))
Something like CREATE INDEX XYZ on table((ACCNT_FLG<>'N' AND (INT_ORG_FLG<>'Y' OR PRTNR_FLG<>'N')) compute statistics ;
how to create a primary key with out creating an index?
View 10 Replies View Relatedwe create index on multiple tables in oracle
View 12 Replies View RelatedI have an IOT table with partitioned on list. I have p1,p2 and p3 partitions. Now I would like to create a bitmap index on partition key.
I gave ALTER TABLE .. MOVE MAPPING TABLE;
But getting the below error,
ORA-28660: Partitioned Index-Organized table may not be Moved as a whole.