SQL & PL/SQL :: Script To Generate Dynamic Columns
Mar 6, 2011
Is there any sql script to generate dynamic columns? pivot still needs the programmer to know the data to generate columns just like this.
select * from
(select current_position, fk_department, wages
from employee)
pivot
(sum(wages)
for fk_department in ('INT', 'WEL', 'CEN', 'POL'));
how about if i don't know the data in fk_department. is this possible in sql?
View 39 Replies
ADVERTISEMENT
Oct 16, 2012
I want to be able to generate unpivot for 1 row of data dynamically.what i am trying to do is based on this linkI just need to be able to pass the table name in format : SCHEMA_NAME.TABLE_NAME and the query should unpivot the data for 1 row. (Will always be 1 row, just need to transpose the column names and the values for 1 row of data)
I made the below query so far. But I am getting an error and can't figure out a way to fix it.pass any table name from your database in the define step
define TAB_NAME='SCOTT.EMPLOYEE'
WITH sel_col AS
(
SELECT DECODE (data_type,
[code]...
ERROR at line 33:
ORA-00904: : invalid identifier
Its the last line of the code. The same seems to work in the select part but not in the IN part.
P.S: I cannot do PL/SQL - as i simply dont have access.
View 9 Replies
View Related
Nov 27, 2012
Is there any way to generate columns dynamically by depending on the rows in a table in 11G .
Ex: If the deptno in DEPT table is not constant,then how to generate the N numbers of columns based on the deptno. Below query is working when we hard coded the deptno (10,20,30,40).What else if we more number of departments and we don't know the departments also.
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Connected as dbo
SQL> SELECT *
FROM (SELECT deptno, job, sum(sal) sal
FROM SCOTT.emp GROUP BY job, deptno) PIVOT(sum(sal) FOR deptno IN(10,
20,
30,
40));
[code].....
View 4 Replies
View Related
Aug 16, 2010
I am facing with one problem while creation of function.
CREATE OR REPLACE FUNCTION fun1(
v_finyear VARCHAR2,
v_yrno NUMBER,
[Code].....
The function created successfully...
But it return the wrong values, like
SQL> SELECT fun1('2004-05', 8, 'FEB')
2 FROM DUAL
3 ;
TB('2004-05',8,'FEB')
--------------------------------------------------------------------------------
FEB
SQL> spool off;
2004-05 is the value of TABLE1
08 is also value of TABLE1
FEB is the Column_name of TABLE1
Actually, i have a value in FEB month, but it return FEB. FEB is the column_name of 'TABLE1'
View 1 Replies
View Related
Jul 15, 2013
I have a result table from a select query. Create_table.txt
FDAVAILABILITY_2GAVAILABILITY_3GTCH_TRAFFICHOSRCSSR
2013 Jun0.9870.992928359.09430.98360.975
2013 W270.99210.994328512.48650.98320.9756
2013 W280.99320.993728659.32560.98430.9734
2013 W290.99530.993328355.02630.98480.9741
I need to transpose this table to below one. But since my rows in 1 table is dynamic and it will increment each week and month I couldn't get a correct result from unpivot.
2013 Jun2013 W272013 W282013 W29
AVAILABILITY_2G0.99 0.99 0.99 1.00
AVAILABILITY_3G0.99 0.99 0.99 0.99
TCH_TRAFFIC28359.094328512.486528659.325628355.0263
HOSR 0.9836 0.9832 0.9843 0.9848
CSSR 0.975 0.9756 0.9734 0.9741
Is it possible to create above table from attached , with a select statement?
View 7 Replies
View Related
Aug 18, 2011
i am practicing to get Dynamic columns as i have learnt from Orafaq SQL/PLSQL forum .i am using Default EMP table...first one is running smoothly as below:
1 DECLARE
2 v_sql VARCHAR2(32767);
3 v_refcur SYS_REFCURSOR;
4 BEGIN
5 v_sql := 'SELECT deptno ';
[code]....
View 11 Replies
View Related
Nov 18, 2012
I have a requirement to execute the query only once for all the columns mapped to a particular table. Lets take an example..
table t1 has the following columns mapping.
col1 col2 col3 col4
variable 1 table abc col1_abc ----
variable 2 table abc col2_abc ----
variable 3 table xyz col1_xyz ----
variable 4 table xyz col2_xyz ----
variable 5 table xyz col3_xyz ----
variable 6 table xyz col4_xyz ----
In col4 , we have to update the values of col3 (column) ... it is very easy to update the values by executing the query for each column but my requirement is ... I want to execute the query once for a table ( example select col1_abc,col2_abc from table_abc ... this will return always a single value after adding other conditions in where clause) and why I want to do this? .. because there can be multiple (might be 30 variables values)
from a single table.
I have converted the columns into rows by using listagg function now I have lets a dynamic query ( for the above example).
for i in 1.2
loop
l_query := ' select col1_abc, col2_abc from table_abc';
open c1 for l_query;
end loop;
my problem is : how to hold these values and update the above table?
View 2 Replies
View Related
May 7, 2013
Provided a sample table to determine the sales agents performance below.
Id AgenName Zone1 Zone2 Zone3 Zone4
1 ABC 90 85 65 55
2 SDD 45 67 78 90
3 ERF 85 30 52 45
If in any zone, the sales is less than 40, it should be failed.This can be determined using the below query
select Id, AgenName, Case when Zone1 < 40 or Zone2 < 40 or Zone3 < 40 or Zone4 < 40 Then 'Failed'
Else 'Eligible'
End as Flg_Comm
from sales_table;
But the problem is when the zone grows (zone5, zone6) every time the query requires to be added with or condition.
Is there a way to dynamically determine the result even when no. of columns grow (or added)?
View 1 Replies
View Related
Nov 16, 2012
I want the output from two tables with rows to columns and generate dynamic basing on the columns.
For example: Table A (a1) , Table B(a1,b1)
Data: A B
------ ----
a1 a1 b1
--- ---- ----
1 1 x
2 1 y
3 2 a
2 b
2 c
o/p: Columnname col_1 col_2 col_3
-----------------------------------------------
a1 b1_1 b1_2 b1_3
----- ---------------------
1 x y
2 a b c
Columns should be generated based on the second table second column.
View 18 Replies
View Related
Jun 6, 2012
I need to write a dynamic SQL in PL SQL to query an unknown number of columns. Let me take a simple example query here:
SELECT FIRST_NAME, LAST_NAME FROM VENDOR_CONTACTS
If I have known the number of columns, e.g. querying two columns: "FIRST_NAME" and "LAST_NAME", I can write a DYNAMIC SQL based on the template in table 8-2 of URL....
DECLARE
stmt_str varchar2(200);
cur_hdl int;
rows_processed int;
FIRST_NAME varchar2(200);
LAST_NAME varchar2(200);
BEGIN
cur_hdl := dbms_sql.open_cursor; -- open cursor
stmt_str := 'SELECT FIRST_NAME, LAST_NAME FROM VENDOR_CONTACTS';
[code]....
However, if I wish to write a dynamical sql to query these two columns for a more general purpose (which should meet the requirement to query different number of columns, e.g. three columns, FIRST_NAME, LAST_NAME, BIRTHDAY instead of two columns FIRST_NAME and LAST_NAME). To do this I first try to query the same two columns but using a different method, following URL.....My code for the same query has error, and I cannot solve it.
DECLARE
stmt_str varchar2(200);
cur_hdl int;
rows_processed int;
l_columns dbms_sql.desc_tab;
l_dummy NUMBER;
l_value NUMBER;
[code]....
View 7 Replies
View Related
Aug 27, 2013
I have 2 tables T1, T2
T1 is having 2 columns t1_c1, t1_c2
T2 is having 3 columns t2_c1,t2_c2,t2_c3
I need to design a form which should be like
there must be a pop item (Dropdown menu) in a separate block.
If I select 1 from the pop item,
T1 with 2 columns should display in a tabular form.
If I select 2 from the pop item,
T2 with 3 columns should display and T1 with 2 columns should hide.
So the form should be dynamic based on the selected pop item. Is there any chance to do this?
View 3 Replies
View Related
Mar 31, 2004
ORA-06502...I have database on oracle 9i on Solaris 9. I create a generate procedure that create dynamic procedure through DBMS_SQL. On this database I got the ORA-06502 error. When I tried to run the same procedure on the same database on oracle 8i on NT this work fine.
View 3 Replies
View Related
Apr 8, 2013
I'm using dynamic sql (DBMS_SQL) to define columns of ref cursor. It works Ok but the problem is when i'm using PL/SQL CURSOR in the REF CURSOR. Then,I'm getting :
Error at line 3
ORA-00932: inconsistent datatypes: expected NUMBER got CURSER
ORA-06512: at "SYS.DBMS_SQL", line 1830
ORA-06512: at "TW.PRINT_REF_CURSOR", line 28
ORA-06512: at line 9
Here is my code:
set serveroutput on
exec DBMS_OUTPUT.ENABLE(1000000);
declare
l_cursor sys_refcursor;
begin
[code]....
Is there a solution or bypass?
View 3 Replies
View Related
Jun 16, 2010
I want to create a report by using one field and one text as columns name in layout but display the all the columns. I mention the 5 column names in query.how can I write function in summary column.
View 4 Replies
View Related
Apr 4, 2011
I am running a fairly busy Oracle 10gR2 DB, one of the tables has about 120 columns and this table receives on average 1500 insertions per second. The table is partitioned and the partitioning is based on the most important of the two timestamp columns. There are two timestamps, they hold different times.
Out of these 120 columns, about 15 need to be indexed. Out of the 15 two of them are timestamp, at least one of these two timestamp columns is always in the where clause the queries.
Now the challenge is, the queries we run can have any combination of the 13 other columns + one timestamp. In reality the queries never have more than 7 or 8 columns in the where clause but even if we had only 4 columns in the where clause we would still have the same problem.
So if I create one concatenated index for all these columns it will not be very efficient because after the 4th or 5th column the sorting would no longer be very useful and I believe the optimiser would simply not use the rest of the index. So queries that use the leading columns of the index in sequence work well, but if I need to query the 10th column the I have performance issues.
Now, if I create multiple single column indexes oracle will have to work a lot harder to maintain all these indexes and it will create performance issues (I have tried that). Besides, if I have multiple single column indexes the optimiser will do nested loops twice or three times and will hit only the first few columns of the where clause so I think it will kind of be the same as the long concatenated index.
What I am trying to do is exactly what the Bitmap index would do, it would be very good if I could use the AND condition that a Bitmap index uses. This way I could have N number of single column indexes which the optimiser could pick from and serve the query with exactly the ones it needs. But unfortunately using the Bitmap index here is not an option given the large amount of inserts that I get on this table.
I have been looking for alternatives, I have considered creating multiple shorter concatenated indexes but this still would not address the issue since many queries would still not be served properly and therefore would take a very long time to complete.
What I had in mind would be some sort of multidimensional index, I am not even sure if such thing exists. But essentially it would be some sort of index that could serve a query efficiently regardless of the fact that the where clause has the 1st, 3rd and last columns of the index.
So considering how widely used Oracle is and how many super large databases there are out there, this problem must be common.
View 12 Replies
View Related
Jan 21, 2011
I have a two question.
Question 1:How to select all columns from table except those columns which i type in query
Question 2:How to select all columns from table where all columns are not null without type each column name which is in empty data
View 5 Replies
View Related
Jul 12, 2012
I have 8 columns. Some of them might be null.I want to display all 8 columns in my result. Not null columns will be first and null at the end.Here is a sample data :
Employee table :
Employee_id Emp_fname emp_lname emp_mname dept salary emp_height emp_weight
1 aaa ddd d1 100 6 180
2 bbb ccc 120 169
3 dfe d2 5.9 223
The expected result is :
result1 result2 result3 result4 result5 result6 result7 result8
1 aaa ddd d1 100 6 180
2 bbb ccc 120 169
3 dfe d2 5.9 223
View 8 Replies
View Related
Feb 18, 2012
I have a requirement to generate a report in csv file, attached scripts, sql query and actual output and expected output.
In the query, I am hard-coding month&year, when I run in march 2012 it should include march 2012 in output (similarly for every month going forward), to do that I have to modify my query to include march 2012 & preceding months in every individual query, this report needs to be generated once every month.
I am looking for a generic solution which does not need to be modified every month, also in the output,under "Mail File" data should be in ascending order, in the "Total Mailed" all the months should have grand total.
oracle version : 10.2.0.1.0
View 25 Replies
View Related
Sep 12, 2011
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production With the Partitioning, OLAP and Data Mining options
How i can get all possible combinations of a given value using SQL or PL/SQL
for example:
1234 - input value
4321
2314
2143
3412
and so on
View 2 Replies
View Related
Jun 10, 2011
I want to generate the 3rd digit to be sequence base on two digit infront. for example:
current data grep direct from table
----------------------------------
data line_number
-----------------
data1 1.1
data2 1.1
data3 3.1
data4 4.1
data5 5.1
data6 5.1
data7 5.1
I want to generate is append in the 3rd digit as below:
data line_number
-----------------
data1 1.1.1
data2 1.1.2
data3 3.1.1
data4 4.1.1
data5 5.1.1
data6 5.1.2
data7 5.1.3
How I can get this?
View 4 Replies
View Related
Oct 16, 2013
I have a requirement to generate the XML file from a pl/sql procedure. The methods which I have searched are either generating the XML from a single query or they are explicitly adding the nodes and elements. I need the method where I can dynamically append child nodes to the file.
View 12 Replies
View Related
Mar 1, 2011
I am unable to generate a fk in the following script..
DROP TABLE PD1 ;
CREATE TABLE PD1 (APP_CODE NUMBER,APP_DTLS VARCHAR2(10),
CONSTRAINT APP_CODE_PK PRIMARY KEY (APP_CODE)
);
DROP TABLE PD2 ;
CREATE TABLE PD2 (LAND_CODE NUMBER,PVT_LAND VARCHAR2(10),
GOV_LAND VARCHAR2(10),OWND_LAND VARCHAR2(10),LEASED_LAND VARCHAR2(10),
CONSTRAINT LAND_CODE_PK PRIMARY KEY (LAND_CODE)--,
-- CONSTRAINT APP_CODE_FK FOREIGN KEY (APP_CODE) REFERENCES PD1(APP_CODE)
[code]....
View 2 Replies
View Related
Apr 28, 2008
i have be requested to create a .txt file. Its for a program that will read the txt file i create to produce a letter i.e I will be extracting, TITLE, FORENAME, SURNAME etc
MR
JOE
BLOGGS
Here is the my code so far,
SELECT
LPA_INPUT.INPUT_TITLE,
LPA_INPUT.INPUT_SURNAME,
LPA_HISTORY.LPA_AMT,
LPA_HISTORY.ELIG_RATE,
LPA_HISTORY.RATE_REBATE,
LPA_HISTORY.RR_AMT,
LPA_HISTORY.LPA_APPLIC,
LPA_HISTORY.LPA_AMT
FROM LPA_HISTORY, LPA_INPUT
WHERE LPA_HISTORY.CLAIM_NO = LPA_INPUT.CLAIM_NO
----------------------------------------------------
Iv been asked to have these eight fields looping over and over for all the records in the database, So im not sure how to do that and how to generate it in a txt file?! I have to produce it in a script and not by a Export/Import wizard in sql server mangement studio!!!
View 11 Replies
View Related
Feb 6, 2012
Can we collect information(generate report) about user sessions connected, database hit ratios, memory usage and other system metrics of all target databases from OEM grid control repository database. Which tables/views in repository DB will be holding these information.
View 1 Replies
View Related
Sep 3, 2013
I have a very big oracle procedure. Since it's too big and calling many other procedures, I am not able to debug the exceptions thrown. Any oracle utility which logs all the procedures called by the master procedure step by step and maintains a detailed record.
View 21 Replies
View Related
Sep 15, 2011
i mean which can generate a primary key when the table name and column name are passed as parameters
View 7 Replies
View Related
Jul 6, 2010
I have 2 question....
1. i have a table and i want to pick data from one field randomly..
i write this query for this purpose...
SELECT SUBJECTIVE_QUES_PK FROM
(SELECT SUBJECTIVE_QUES_PK FROM PMS.SUBJECTIVE_QUES
ORDER BY SYS.DBMS_RANDOM.VALUE)
WHERE QUES_TYPE_FK=3
AND ROWNUM<=5;
2. can i write this query in forms 6i..
i know that this question not relevant but if i write it in forms section then i will be duplicate.
View 27 Replies
View Related
Nov 2, 2011
i want to generate bar code in forms 6i but i don't know the code.
View 3 Replies
View Related
Dec 17, 2011
I need a "solution", guidance to a problem I have to solve. I have different letters with a value associate to it like
A:10, B:20, ..., G:250 and I have a Target to reach TARGET= 90
and I need to find among all letters I have which combination is equal or closest to my target.
A:10
B:20
C:20
D:20
E:30
F:40
G:250
IF there is more than one solution possible, the first found is perfect. With my example I can reach 90 with different combinations:
A+B+C+F
A+B+D+F
A+C+D+F
B+C+D+E
B+E+F
C+E+F
D+E+F
To complicate the things I have up to 10 different letters that need to combine to match my target. If there is no combination that exactly match my target, the closest higher combination is picked.
View 31 Replies
View Related
Mar 28, 2012
during the migration to 11g we had a problem with pdf font.
In 10g oracle report the pdf are generated correctly while in 11g all the character are shrink in the pdf file.
I attached the same file generate with oracle reports 10g.
View 3 Replies
View Related