I do not know the table name but have a query that for sure returns the table name and I want to select a column value from the table into my PLSQL variable.
Here is the code :
DECLARE
v_VerTabName VARCHAR2(30);
v_Minor NUMBER(2);
[Code]....
But when I compile this I get ORA-00936 : Missing expression at the EXECUTE IMMEDIATE line.
i want to select dynamic column names in my select statement in my function.
View 4 Replies View RelatedI wrote a simple procedure to copy the create timestamp and create user name to update timestamp and update user name of the same record. (See code below)
This works fine for a hard-coded table and primary key column. However, I cannot figure out how to get this to work with dynamic sql.
All my other procs, which don't use SELECT UPDATE FOR work fine with dynamic sql.
Proc that works:
CODECREATE OR REPLACE PROCEDURE proc_set_upd_columns
IS
CURSOR c1 IS
SELECT *
FROM mytable
FOR UPDATE
ORDER BY mycolumn;
c1rec c1%ROWTYPE;
[code].........
Partial proc that does NOT work:
CODECREATE OR REPLACE PROCEDURE LDEVORE.proc_set_upd_columns (
p_input_table_name IN VARCHAR2,
p_pk_id_col_name IN VARCHAR2)
IS
v_qry_str VARCHAR2(1000);
v_cursor_str VARCHAR2(1000);
v_create_tmstmp TIMESTAMP;
v_create_user_name VARCHAR2(30);
[code].......
I have a question regarding the optimal way to code a dynamic SELECT INTO statement. Below are the 2 posiibilities I know of:
1. Dynamically executing the SELECT statement and making use of the INTO clause of the EXECUTE IMMEDIATE
statement
CREATE OR REPLACE FUNCTION get_num_of_employees (p_loc VARCHAR2, p_job VARCHAR2)
RETURN NUMBER
IS
v_query_str VARCHAR2(1000);
[code]...
2. Encapsulating the SELECT INTO statement in a block and dynamically exectuting the block
CREATE OR REPLACE FUNCTION get_num_of_employees (p_loc VARCHAR2, p_job VARCHAR2)
RETURN NUMBER
IS
v_query_str VARCHAR2(1000);
[code]...
which way would be preferred? I know the second method uses a bind variable for the INTO clause, but does the first one also use bind varialbes (no semi-colon)? Any differences in terms of efficiency or speed?
I am trying to run a dynamic select statement form a function and return the result into a variable, everything goes fine but the return is always null!
CREATE TABLE AFESD.MAJOR_ACCOUNT
(
NUMBER0 NUMBER(2) NOT NULL,
SHORT_NAME CHAR(35 BYTE) NOT NULL,
FULL_NAME CHAR(50 BYTE)
)
--Actually any table can do
CREATE OR REPLACE FUNCTION F_GEN_SELECT_INT
(S_APP_USER IN VARCHAR2, I_MODULE_ID IN NUMBER, S_TABLE IN VARCHAR2, S_COLUMNS IN VARCHAR2)
RETURN NUMBER
AS
I_RETURN NUMBER;
S_SQL VARCHAR2(300);
--S_DB_ERROR VARCHAR2(100);
[code]....
B.S. I didnt delete the commented lines to have your review comments.
I have a problem that i have hard coded the username.tablename in each select statement of all forms of my application. Now i want to use a dynamic variable in place of username in each select statement throughout the application. The example is:
select * from scott.emp
and i want to write it as:
select * from variable.emp
But at compilation of the form the compiler should know the above variable name.
I have tried to use following select statement but it does not work.
select user into :global.username from user_users
I think perhaps my problem would be solved with Dynamic SQL Statement but i have no experience by using this statement.
When a user selects a Plan Type (Parent Select list) Plan codes (Child select list) to be filtered, working OK.
When a plan code is selected I need to do conditional display of regions.
Example: Plan code = A then display Region A
Plan code = B then display Region B etc.
I have a DA on Plan code select list but it's not working as it's being a cascaded (child) select list and the 'Change' event is already fired when I selected the Plan type, I also tried with other event options with no success.
Plan code shows no value in the session.
I am trying to execute dynamic SQL in Stored Function and I don't know how to do this.
Explanation:
In the function I am calling pr_createtab is procedure which will create a physical table and return the table name in the out variable v_tbl_nm.
I need to query on this dynamic table and return the result as return result. But i am not able to do it.
Here T_web_loylty_report_table is a type.
CREATE OR REPLACE function CDW_DSS.f_ReturnTable(i_mrkt_id in number, i_cmpgn_year in number)
return T_web_loylty_report_table is
v_tbl_nm varchar2(50);
i_cntry_cd varchar2(20);
v_sql_str varchar2(32567);
[code]......
Oracle 11.2
I trying to create a procedure that could update one or more different table into clob data - but only those tables that contain your search (indexed) word.
I have a 3 tables: item, common_lookup, member
>
CREATE INDEX i_item_barcode ON item (item_barcode) INDEXTYPE IS ctxsys.context;
CREATE INDEX i_item_title ON item (item_title) INDEXTYPE IS ctxsys.context;
CREATE INDEX i_item_subtitle ON item (item_subtitle) INDEXTYPE IS ctxsys.context;
CREATE INDEX i_common_lookup_meaning ON common_lookup (common_lookup_meaning) INDEXTYPE IS ctxsys.context;
CREATE INDEX i_account_number ON member (account_number) INDEXTYPE IS ctxsys.context;
[Code]....
Now is the question.. If it possible to create the procedure search_execute which can add data depending on subbmited parameters ?
If it possible, can You give me an example (dbms_output/update_clob), for search_execute to recive something like that:
>
search_execute ('Wars', item, item_title)
>
>
select * from clob data :
1 1068 ASIN: B00003CX5P 1014 Star Wars - Episode I The Phantom Menace (CLOB) (BLOB) PG MPAA 22-mar-2005 3 16-lut-2012 17:31:55 3 16-lut-2012 17:31:55
2 1069 ASIN: B00006HBUJ 1014 Star Wars - Episode II Attack of the Clones (CLOB) (BLOB) PG MPAA 22-mar-2005 3 16-lut-
[Code]....
I try write something like this (it is not compile - and I know where is mistake, I tried to figure it out in several different ways - This is just my way of thinking expression) :
>
CREATE OR REPLACE PROCEDURE search_execute (v_text IN VARCHAR2, v_column_name IN VARCHAR2, v_table_name IN VARCHAR2)
IS
v_clob CLOB;
v_tmp_clob CLOB;
CURSOR c1 IS (SELECT * FROM v_table_name WHERE contains (v_column_name, v_text) > 0);
CURSOR c2 IS (SELECT column_name FROM user_tab_cols WHERE table_name = v_table_name);
BEGIN
[Code]...
I have a requirement to create the table monthly.The tablename will be the o/p of the following select query.
select 'TBR_AND_SECURITY_DEPOSIT'||TO_CHAR(sysdate, 'Monyy') from dual
I am trying to create the table for creating the backup of the existing table TBR_AND_SECURITY_DEPOSIT.
create table (select 'TBR_AND_SECURITY_DEPOSIT'||TO_CHAR(sysdate, 'Monyy') from dual) select * from TBR_AND_SECURITY_DEPOSIT
but it is throwing error as invalid table name.
I am dynamically creating a staging table my_stg, and then populate it. Seems simple, but not sure why i get this error,
create table gtest4(myid varchar2(10), mykey varchar2(10));
create table gtest5(myid varchar2(10), mykey varchar2(10));
insert into gtest4 values(1,3);
insert into gtest4 values(2,7);
insert into gtest5 values(5,3);
insert into gtest5 values (1,7);
commit;
CREATE OR REPLACE PROCEDURE px
IS
TYPE rectype IS RECORD (
myid VARCHAR2 (100),
mykey VARCHAR2 (100)
);
TYPE tabtype1 IS TABLE OF varchar2(100)
INDEX BY BINARY_INTEGER;
TYPE tabtype2 IS TABLE OF varchar2(100)
INDEX BY BINARY_INTEGER;
rec1 tabtype1;
rec2 tabtype2;
cur sys_refcursor;
[code]....
count current exists max min prior sql stddev sum varianc execute forall merge time timestamp interval date
pipe
<an alternatively-quoted string literal
create a table in forms .
i tried to do it with forms_table(--) but i am in confusion.
i am practicing to get Dynamic columns as i have learnt from Orafaq SQL/PLSQL forum .i am using Default EMP table...first one is running smoothly as below:
1 DECLARE
2 v_sql VARCHAR2(32767);
3 v_refcur SYS_REFCURSOR;
4 BEGIN
5 v_sql := 'SELECT deptno ';
[code]....
I have 2 tables , which can be mapped with a common column and the second table's rest of the columns should become like columns(like pivot) and in the second table itself 1 more column called value , this sum of the value becomes a value to the pivot column value. For this I am using CASE structure and I am writing the individual case for each column , but I am sure after some extent case don't work at all and I would like to do it dynamically( when ever the new entry will come into the source table , my proc has to pick automatically the new value and put the new value as part of pivot structure) , so pls share your inputs and if possible provide some sample code.
View 3 Replies View RelatedIm facing some issues with my form, getting stuck... prob desc below : I have Table A which has columns; car_year, car_type, line_num, line_text. Table B has country, car_year, car_type, line_num, data_entry_amt.
Table A contains data which gets updated once every year only. Contains what year model is the car, what type of car it is.. Line_num has numbers starting from 1 which indicates the different part number and line_text has description for that line_num. eg :
2010 Toyota 1 Windshield
2010 Toyota 2 Door
2010 Toyota 3 Tire
2010 BMW 1 Windshield
2010 BMW 2 Door
2010 BMW 3 Tire
2010 BMW 4 Rear_mirror
Table B contains specific data related to table A, Contains country where car details n prices are, car_year, car_type, line_num, and amount($) for that part. for example :
Australia 2010 Toyota 1 400.50
Australia 2010 Toyota 2 200.40
Australia 2010 Toyota 3 308.25
So in year 2010, in Australia, Toyota's Door was sold at $200.40 Now, Table A will have similar data for this year and users will enter data for table B throughout this year. I tried master-detail form for this but it doesnt work. Because every year line_num change in table A and therefore cant implement a fixed number or rows on the form for amount for table B.
How to use dynamic listing but im not familiar with it. So how i should go about doing this. My form has structure has below :
Country Car_year
___________________________________________________
table_A.line_num table_A.line_text table_B.data_entry_amt
table_A.line_num table_A.line_text table_B.data_entry_amt
table_A.line_num table_A.line_text table_B.data_entry_amt
table_A.line_num table_A.line_text table_B.data_entry_amt
When clicked on save, data on table_B.data_entry_amt on this form should go n insert into table B.
i want to create a form & show some columns accordingly rows entered in another table
for eg.
a table name temp have three columns (no,name,date) in name it shows some rows like
a
b
c
d
i want to create a new dummy form which shows
a b c d
if i remove b from temp table then new form shows only
a c d
is it possible
I want to execute a dynamic query which is stored in a Table.
Output of that query should be stored in database server.
Is there any way i can create a dynamic procedure? I have created a sample code but issue is i cannot make the below data type dynamic as per the query.
en com_fund_info_m%ROWTYPE;
CREATE TABLE TEMP (SQLSTATEMENT VARCHAR2(100))
DECLARE
TYPE r_cursor IS REF CURSOR;
c_emp r_cursor;
en com_fund_info_m%ROWTYPE;
[code].....
I have a requirement to be coded like this:
A function to return pl/sql table(cant use ref cursor) whose columns varies every time it runs i.e,
means
type pl_tab_type is object(col1 varchar2(1000), col2 varchar2(1000))
type pl_tab is table of pl_tab_type
func f return pl_tab
as
...
end;
note : pl_tab_type will vary for each run of function f
i.e.,for example, pl_tab_type can be changed to as follows:
type pl_tab_type is object(col1 varchar2(1000), col2 varchar2(1000),col3 varchar2(1000))
how to return pl/sql table of dynamic type from func,
create table src(id number,val number,data varchar2(100)) insert into src values (1,1,'SUN');
insert into src values (2,2,'WED');
insert into src values (3,3,'MON');
create table trg(id number,val number,data varchar2(100)) required rows to be inserted in the target table.
insert into trg values (1,1,'SUNDAY');
insert into trg values (2,0,NULL);
insert into trg values (2,0,NULL);
insert into trg values (3,0,NULL);
insert into trg values (3,0,NULL);insert into trg values (3,0,NULL);
{code} based on the column value of the source table src's column val , i need to populate my target table trg . If the value of val is 1 then only one target row is created in the target .If the value of val in the source table src is 2 then the target is populated with 2 rows .The values of the target columns are mapped as follow:
1)id -as it is
2)val - if the val of src is 1 then map the val as it is .If the value of val is more than one then create as many rows as the value of val ,id will be as it is and the value of val and data will be null
3)data - if the val of src is 1 then expand the abbreviation else null .
Provided a sample table to determine the sales agents performance below.
Id AgenName Zone1 Zone2 Zone3 Zone4
1 ABC 90 85 65 55
2 SDD 45 67 78 90
3 ERF 85 30 52 45
If in any zone, the sales is less than 40, it should be failed.This can be determined using the below query
select Id, AgenName, Case when Zone1 < 40 or Zone2 < 40 or Zone3 < 40 or Zone4 < 40 Then 'Failed'
Else 'Eligible'
End as Flg_Comm
from sales_table;
But the problem is when the zone grows (zone5, zone6) every time the query requires to be added with or condition.
Is there a way to dynamically determine the result even when no. of columns grow (or added)?
I have a plsql block construct where i want to use for loop dynamically , the query which for cursor for for loop will accept the table name from parameter and join them to return the result. the resultant data will iterate in loop and do the execution.
DECLARE
--initialize variables here
v_date varchar2(10);
v_rebuild_index varchar2(250);
v_sql VARCHAR2(250);
p_table_name varchar2(250) := 'DS_ABSENCE';
p_source_table varchar2(30) := 'STG_ABSENCE';
p_source_owner varchar2(30) := 'STG_SAP';
v_for_sql varchar2(1000);
[code]....
how to play around with NDS dynamic sql and I'm trying to add a column on the fly.Basically the procedure is trying to take a table name, column name, and eventually a data type and adds it to a table.
It works fine without the bind variable for the column name, accepting the table name on the fly.As soon as it tries to use the column name I get an ORA-00904 invalid identifier exception.
Here is the procedure I'm using
CODEcreate or replace
procedure test(tbl_name varchar2, col_name varchar2) IS
qry varchar2(500);
begin
[code]....
Here is how I'm executing it.
CODEexecute test(tbl_name => 'BB_SHOPPER', col_name => 'MEMEBER');
i used sql loader to import data from csv file to my db.but every time the columns places are changed.o i need dynamic way to insert data into correct column in the table.
in csv file contains column name and i insert this data to temp table, after that i want to read data over column name.also i read the column names from (All_Tab_Columns) to make combination of column name between temp table and All_Tab_Columns table to insert data to right place...
Static Tables Creation In oracle & Diff Between Static table ,Dynamic table
View 2 Replies View RelatedI am having a table with 4 columns as mentioned below
For a particular prod the value greater less than 5 should be rounded to 5 and value greater than 5 should be rounded to 10. And the rounded quantity should be adjusted with in a product starting with order by of rank with in a prod else leave it
Table1
Col1prodvalue1rank
1A21
2A62
3A53
4B61
5B32
6B73
7C41
8C22
9C13
10C74
Output
Col1prodvalue1rank
1A51
2A52
3A33
4B101
5B02
6B63
7C51
8C52
9C03
10C44
I have taken all the records in to a cursor. Once after rounding the request of 1st rank and adjusting the values of next rank is done. Trying to round the value for 2nd rank as done for 1st rank. Its not taking the recently updated value(i,e adjusted value in rounding of 1st rank).
This is because of using a cursor having a value which is of old value. Is there any way to handle such scenario's where cursor records gets dynamically updated when a table record is updated.
I'm in a situation where i have to design dynamical XML table that gonna get inserted in a view:
late'si consider the following table:
CREATE TABLE FB_XML
(
ID NUMBER(10) NOT NULL,
FB_ID NUMBER(10),
XMLCONTENT CLOB
)
the XML content field have content like the following:
XMLROOT(XMLELEMENT (
"Form",
XMLELEMENT ("elements",
(SELECT XMLAGG (
[code].......
so late consider for the first row i insert for the
* id:1
* fb_id : 25
* xmlcontent:
XMLROOT(XMLELEMENT (
"Form",
[code]........
the code works "fine" here but the xml in the fb_xml table is not EXECUTED it simply escaped by oracle , i know i should add something so that the XML have to execute and generate.
How can I create PLSQL table type dynamically?
I will have to take the Employee Names and create a table structure. Number of employee names can vary from day to day. So, whenever I execute my procedure with Table type, I will have to build the table columns with the employee names.
I have the below data in table test_1.
select * from test_1
IDNameTotal
-----------
1A100
2B100
3C100
4D100
test_2 table contains the concatination of ID's with comma seperated. Actually in this table ID column is of datatype varchar2.
select * from test_2
ID
----
1,2,3
My requirement is to select the data from test_1 table where the id values in this table exists in test_2 table. I tried with the belowselect statement, but could not get any data.
SELECT * FROM test_1 WHERE to_char(id) IN (SELECT id FROM test_2)
create table test_1 (id number, name varchar2(100), total number)
create table test_2(id varchar2(100))
insert into test_1 values (1,'A',100)
insert into test_1 values (2,'B',100)
insert into test_1 values (3,'C',100)
insert into test_1 values (4,'D',100)
I'm using dynamic sql (DBMS_SQL) to define columns of ref cursor. It works Ok but the problem is when i'm using PL/SQL CURSOR in the REF CURSOR. Then,I'm getting :
Error at line 3
ORA-00932: inconsistent datatypes: expected NUMBER got CURSER
ORA-06512: at "SYS.DBMS_SQL", line 1830
ORA-06512: at "TW.PRINT_REF_CURSOR", line 28
ORA-06512: at line 9
Here is my code:
set serveroutput on
exec DBMS_OUTPUT.ENABLE(1000000);
declare
l_cursor sys_refcursor;
begin
[code]....
Is there a solution or bypass?
I have the same problem like in below link
[URL]