I have one requirment like below
Table1 have records like below
parent childflag
null.....A......Y
A........B......Y
B........C
C........D
D........E......Y
I want it should be like
parent child flag
null......A.....Y
A.........B.....Y
B.........E.....Y
I want to replace 'D' (parent of 'E') with any of the upper level which has Flag 'Y' (first level parent which satisfy falg 'Y')
I have a parent table EMPLOYEE which includes columns (sysid, serviceno,employeename...) sysid is Primary key, serviceno is Unique key and I have child table DEPENDENT includes columns (sysid,employee_sysid,name,dob...) here again SYSID is primary key for DEPENDENTS table, employee_sysid is Foreign key of EMPLOYEE table.
Now I want to change SYSID (using sequence) in EMPLOYEE table which need to be update in DEPENDENTS table as well
Note: I have 10000 records in EMPLOYEE table as well as I have 5 more child tables which need to update new SYSID.
I am working on form builder 6i. I have a header block A(Multi record block), child block B. Both are non control blocks. My requirement is, if i put the cursor in any header record, i want to auto populate corresponding child record like in master child relation.
which trigger i need to write logic to auto populate the child record.
Just wanted to pose a question Can a (Unique and Not nullable)Alternate key of the parent table be part of child Table in an Identifying relationship i.e part of primary key of a child table????
Is there a rule that a primary keys of a parent table can be used to build a identifying relationship with its child?
I've the following data and i need the parent and leaf most child,including their id's
Create table par_chld (id,p_id,c_id) as
(select 1,900,501 from dual union all
select 2,900,502 from dual union all
select 3,900,503 from dual union all
select 4,100,900 from dual union all
select 5,200,900 from dual union all
select 6,300,400 from dual union all
select 7,101,500 from dual union all
select 8,102,500 from dual union all
select 9,103,500 from dual union all
select 10,201,600 from dual union all
select 11,201,601 from dual union all
select 12,201,602 from dual )
In the above data
p_id =100 has c_id 900 , and this 900 acts as a parent which has child 501 , 502 ,503
And the output should be in the following format , Where i don't need the middle level data. I need parent and its leaf child along with the id's of parent and child
Expected output
id_p p_id id_c c_id
4 100 1 501
4 100 2 502
4 100 3 503
5 200 1 501
5 200 2 502
5 200 3 503
6 300 6 400
7 101 7 500
8 102 8 500
9 103 9 500
10 201 10 600
11 201 11 601
12 201 12 602
I tried the following query where i got the p_id,id_c,c_id columns , but unable to get the column id_p
select connect_by_root p_id p_id ,id id_c,c_id
from par_chld
where connect_by_isleaf =1
start with p_id not in (select c_id
from par_chld
where c_id is not null)
connect by nocycle p_id =prior c_id
getting the id_p column as expected above.
way to achieve the below logic.
SQL to pick up parent child relationship within same table with a certain logic.
Example:
mod_product_numberProduct_Hierarchy
H555888 PH05678
H888987 H555888
H8889 H555888
[code]...
Example: I expect the rows with H8889,H9955 & P6666 & P5555 to be sub-category values value for product hierarchy H555888.
If there are rows with H8888987 as Product_hierarchy, we will pull up those rows too for product hierarchy H555888. The extra condition is we drill down only on 7 character mod_prod_number not on 5 character mod_prod_number. We pull out all sub category mod_prod_number for all distinct Product hierarchy.
I have a table called FAMILY which holda the data like , for father_gen_1 --->father_gen_2 --> father_gen_3 -- son.
father_gen_1 father_gen_2 father_gen_3 son
ABC XYZ GEF MNC
ABC lmn kth
I want to get the output which is a three column heirarical table and holds the parent child relationship Like following:-
id name parent_id
1 ABC NULL
2 XYZ 1
3 GEF 2
4 MNC 3
5 LMN 1
6 KTH 5
i have a table with data as follows:
select genres.* from genres
data is as follows
INTPRODUCTIDVCHGENRENAME INTGENREPAGEIDINTPARENTIDINTGENREID
14430015Biography 157 0100
14430015Classics & Poetry 173 0116
14430015Literature & Anthologies 175 173118
now when i give
select level,genres.* from genres connect by prior INTGENREPAGEID= INTPARENTID
i get
LEVELINTPRODUCTIDVCHGENRENAME INTGENREPAGEIDINTPARENTIDINTGENREID
114430015Biography 157 0100
114430015Classics & Poetry 173 0116
214430015Literature & Anthologies 175 173118
114430015Literature & Anthologies 175 173118
i need to find the parent and child from the table in this case the parent is Classics & Poetry and child is Literature & Anthologies..the way of getting only the parent and child record from this table.
I have a parent table and child table. I want a row to be deleted from the parent table which is referenced by a child row. Is there a way to achieve this. I dont have permission to re create the table or alter the table using delete cascade option. Is there a way to do it in sql.
SQL> create table t1(a number primary key, b number);
SQL> create table t2(c number, d number references t1(a));
SQL> insert into t1 values(1,2);
SQL> insert into t1 values(2,3);
SQL> insert into t1 values(3,4);
SQL> insert into t2 values(10,3);
SQL> insert into t2 values(20,2);
SQL> delete from t1 where a=2;
delete from t1 where a=2
*
ERROR at line 1:
ORA-02292: integrity constraint (CISBATCH.SYS_C00763501) violated - child
record found
i want to update primary key of 1 master and 2 child table is it possible if i do it simultaniously if not
View 9 Replies View RelatedI have a DB that has one parent table with many child tables. I would like to delete all records(child - parent) based upon a particular "net_id". I have three versions that "seem" to work BUT I'd like to use "version2" because I want to go to the parent one time(for the parent delete I just made it simple for me) only and be able to delete the child record(s) from the child table(s). I want to achieve this w/o using triggers...
My question: Is version2 an "ok" way to delete child records or should I try another method(version1 or 3)??
create table PARENT
(
event_id NUMBER,
event_title VARCHAR2(50),
net_id VARCHAR2(16)
);
--truncate table parent;
insert into parent
(event_id, event_title, net_id)
values
(1, 'title1', 'CURLY');
[code]...
I want to delete records from parent table which are less than 2 years. Before deleting records from parent table we have to delete records from child table. How can we delete those records. I don't want to use ON DELETE CASCADE.
MASS_MASTER --parent table.
MASS_CHILD --child table.
The below query is used to delete records from parent table.
DELETE FROM mass_master WHERE last_date<=ADD_MONTHS(sysdate,-24);
The child table MASS_CHILD is not having last_date column. provide me the query to delete same records from child table.
I have two forms, FormPARN, FormCHLD.
One Text item is there in FormPARN, near to that Text item, Button is there.While clicking Button FormCHLD will be opened. Inside the FormCHLD, i will do some calculation and i need to store the result in FormPARN's Text Item.
How can i do it?
There is table:
Column A | Column B |
X | X |
X | Y |
Y | X |
Y | Y |
I have selected view with "group by rollup":
ID | Column A | Column B |
1 | | |
2 | X | |
3 | Y | |
4 | X | X |
5 | X | Y |
6 | Y | X |
7 | Y | Y |
Now I want to display it in client app like a tree.So, I need create ID's of parents in child rows, like this:
ID | Parent ID | Column A | Column B |
1 | | | |
2 | 1 | X | |
3 | 1 | Y | |
4 | 2 | X | X |
5 | 2 | X | Y |
6 | 3 | Y | X |
7 | 3 | Y | Y |
I have a table which uses parent-child relationship to store the options available. I need a procedure to give me the full path given the id of a particular option.
I have two different functions. One of them uses the Oracle built in function and the other uses simple queries with a loop.The code of the functions are given below.
Now, the problem is with their "performance". The difference in their performance is significant. The function using the Oracle function takes more than 2 hours to run a query whereas the other function takes less than 2 minutes.
I am having trouble trusting the other function. No matter how many tests I perform on the output of both the functions, it always comes out to be the same.
Function 1
=====================
FUNCTION Gettree (opt_id IN NUMBER,i_app_id IN NUMBER)
RETURN VARCHAR2
IS
path VARCHAR2(32767);
application_no NUMBER;
BEGIN
[code]...
I have table emp that contains empno, empname, mgr .what i want is a general procedure that will take empno as input and will give all the child rows and parent for entered empno.
for ex
E
A-->B-->C-->D
F-->G
H
When i will pass d as node it will return c,b,a,e,f,g,h
I am working on a project, the insert statement is not functioning properly and I cannot find the error The error is in the insert statement for CustOrder. The error states that NULL cannot be inserted into CustOrder.CustID. I have declared CustID and its reference. I have looked over the code several times and I cannot find the problem.
If it makes a difference I am using APEX. The company has not database or program to work with a database so I am building everything from scratch.
declare
l_CustOrderID number;
l_CustID number := :P11_CustID;
begin
[code]....
I have 2 tables, ITEM_T is the base table and RELATIVE_T is the relation table which establish the relationship between parent and child.
I want to give ZZZ child as input and I want get output in below format. I tried various method, but I am not able to get the below result.
Result:
ChildParent_1Parent_2
ZZZYYY XXX
ITEM_T
PK_IDITEM_ID
PK_1XXX
[Code]...
Expected Result:
When give input as ZZZ:
ChildParent_1Parent_2
ZZZ YYY XXX
I need to fech parent records only when no child record with status 'N' exists. There are only two possible values for status column of child table 'Y' / 'N'.
Below are table structures and insert statements for data.
CREATE TABLE MASTER
(
COL1 NUMBER,
[Code]....
COMMIT;Query I framed is below
select * from master where exists (select null from child where child.col2 = master.col1
group by child.col2 having count(distinct col3) =1 )
Output in above case would be 3 as for 1 there's one record with status as 'N' and for 2 there's no child record. I am on 10g.
I have data in a table which don't have parent child relation ship. Can I display the data in that table in hierarchical tree item in a form.
Is it a must that data should have parent child relationship to display them in hierarchical tree item in a form.
select * from V$VERSION
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I have loaded into an Oracle table defined as XMLTYPE. I'm okay with PL-SQL and stored procedures, where I will ultimately do this processing once I get a handle on XML DB querying from an XMLTYPE table.
Based on reading the oracle documentation about XML DB, and more importantly, reading dozens of posts to this forum,I have been successful in loading the XML files into a SQL XMLTYPE table and doing simple queries against that table to retrieve some of its data so that I can then insert that data into other target oracle relational tables.
how to select parent/child data from XMLTYPE tables. I am able to follow the forum examples and can replicate the methods shown on the many example XML contents shown on this forum, but not against the XML that I have to process. I am wondering if my struggle is caused by my lack of knowledge, or by ill-formed XML content supplied to me by the educational vendor.The XML content has structured the XML content nodes in such a way that I do not seem to be able to apply the parent/child sql methods.I have been able to use for other XML examples I have tested against.
My XML file shown below represents High School Transcript data, for which I need to be able to parse out into my own oracle relational tables for that student, his personal info, and his course info, etc. i.e., for our example, which courses he has taken for which High School grade levels. The vendor-supplied XML seems to put the Courses and the High School grade level in "parallel nodes," instead of parent/child nodes, so I am struggling to be able to use SQL to differentiate which course the student took in NinthGrade versus TenthGrade.
-- WHat I would like to determine from a select statement:
LASTNAME GradeLevel COURSETITLE
=============================
Smith NinthGrade PHYS ED 101
Smith TenthGrade CALCULUS 201
Smith TenthGrade ZOOLOGY 202
(The data has been simpliied and masked, but is true to the content and is queryable).
select * from V$VERSION
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
[code]....
We have a table in the client database that has two columns - column parent and column child. The whole hierarchy of DB table dependencies is held in this table.If Report 1 is dependent on Table A and Table A in turn is dependent on two tables Table M and Table N. Table N is dependent on table Z it will appear in the db table as,
Hierarchy Table
Parent Child
Report1Table A
Table ATable M
Table ATable N
Table NTable Z
Requirement :
From the above structure, we need to build a table which will hold the complete hierarchy by breaking it into multiple columns.The o/p should look like this
-ParentChild 1Child 2 Child 3
-Report1Table ATable M
-Report1Table ATable N Table Z
Child 1, Child 2, Child 3 ....and so on are columns.The number of tables and the no of hierarchical relationships are dynamic.
SQL Statements to create hierarchy table:
create table hierarchy (parent varchar2(20), child varchar2(20));
insert into hierarchy values ('Report1','Table A');
insert into hierarchy values ('Report1','Table B');
insert into hierarchy values ('Table A','Table M');
insert into hierarchy values ('Table B','Table N');
insert into hierarchy values ('Report2','Table P');
insert into hierarchy values ('Table M','Table X');
insert into hierarchy values ('Table N','Table Y');
insert into hierarchy values ('Report X','Table Z');
Approached already tried :
1) Using indentation : select lpad(' ',20*(level-1)) || to_char(child) P from hierarchy connect_by start with parent='Report1' connect by prior child=parent;
2)Using connect by path function :
select *
from (select parent,child,level,connect_by_isleaf as leaf, sys_connect_by_path(child,'/') as path
from hierarchy start with parent='Report1'
connect by prior child =parent) a where Leaf not in (0);
Both the approaches give the information but the hierarchy data appears in a single column.Ideally we would like data at each level to appear in a different column.
Suppose i have to two tables.. emp and dept. Deptno column Foriegn for the both table. how to find the non relation table and relation table.
View 8 Replies View Relatedoracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
I have a main table : CLAIMS_MAIN, in which claim_id is a primary key I have another table : CLAIMS_TRANS , in which claim_id is not a unique key, I mean, there can be more than one records with the same claim_id.. but the column transaction_id is unique, but transaction_id column doesnt exist in the main claims table.
It is required to join both these tables on claim_id...
I am trying to establish PK-FK relationship between 2 tables. Table 1 has VACC_ID as a primary key. Table 2 has VACC_ID and SCH_ID as the primary keys. I am trying to add VACC_ID from Table 2 as a FK to Table 1. This is the code I used
ALTER TABLE Table_1
ADD CONSTRAINT FK_VACC_ID
FOREIGN KEY (VACC_ID)
REFERENCES Table_2(VACC_ID)
I also tried to add it without writing the query and editing the Table 1. By default, I am getting 2 columns(both VACC_ID) in the local column being referenced to the 2 primary keys(VACC_ID and SCH_ID) of table 2. I also uploaded the screeshot of the error, when I run the query.
I have a table which contains the connectivity details. It is telecom data. The table contains the relation between the point features(Ex: Terminal) and linear features(Ex: Cable)
Below is some sample data
drop table connectivity ;
create table connectivity
(
ftr_no number(5),
ftr_id number(5),
[Code]...
-- 2nd linear ftr
insert into connectivity values (30,10359,33, 9655, 2,NULL,NULL);
insert into connectivity values (30,10359,33, 9656, 1,NULL,NULL);
insert into connectivity values (30,10359,30, 10359,3,NULL,NULL);
[Code]...
In the connectivity table PARENT_FTR_NO and PARENT_FTR_ID needs to be updated based on these conditions.
1. Correspponding to each feature there are 3 entries in this table.
2. Each feature(Point orLinear) has 2 sides INcoming and OUTgoing
3. The possible values for the RELATION column are 1, 2 and 3 where
-> 1 indicates feature conncted at the OUTgoing end
->2 indicates features connected at the INcoming end
->3 indicates self connected
4. Always a linear feature is the parent of a point feature which are connected to the OUTgoing end of the linear feature (i.e where RELATION = 1)
There is another table which contains FEATURE_NO and FEATURE_TYPE.
create table ftr_catgry
(
ftr_no number(5),
ftr_type char(1)
);
[Code]...
FTR_NO F
---------- -
33 P
31 L
30 L
Where
'L' represents linear feature
'P' represents point feature
The relation should be updated as
Step 1. Start with a linear feature, for example FTR_NO = 31
SQL> select * from connectivity where ftr_no = 31 and ftr_id = 10354 and relation = 1;
FTR_NO FTR_ID CONNECTED_FTR_NO CONNECTED_FTR_ID RELATION PARENT_FTR_NO PARENT_FTR_ID
---------- ---------- ---------------- ---------------- ---------- ------------- -------------
31 10354 33 9651 1
The feature connected to the OUTend of the 10354 i 9651 with FTR_NO = 33 and it is a point feature so the parent for 9651 is 10354
Step 2.
SQL> select * from connectivity where ftr_no = 33 and ftr_id = 9651 and relation = 1;
FTR_NO FTR_ID CONNECTED_FTR_NO CONNECTED_FTR_ID RELATION PARENT_FTR_NO PARENT_FTR_ID
---------- ---------- ---------------- ---------------- ---------- ------------- -------------
33 9651 33 9652 1
9652 is connected to 9651 at the OUTend, since 9651 is point feature so the parent of 9651 which is a linear feature is also the parent for 9652
Likewise the all relations have to be updated
Expected result after update
SQL> select * from connectivity;
FTR_NO FTR_ID CONNECTED_FTR_NO CONNECTED_FTR_ID RELATION PARENT_FTR_NO PARENT_FTR_ID
---------- ---------- ---------------- ---------------- ---------- ------------- -------------
31 10354 33 9650 2
31 10354 33 9651 13110354
31 10354 33 10354 3
33 9651 31 10354 2
33 9651 33 9652 13110354
33 9651 33 9651 3
33 9652 33 9651 2
[Code]...
24 rows selected.
I have 2 schemas in my database with over 500 tables in each.i am trying to know which tables actually belong to which datafile in which tablespace.
View 2 Replies View RelatedOn a form I have 2 blocks, shown on different tabs. Relation created by forms wizard. The relation works great when navigating through the blocks, the details for the master are shown fine.
Example for this form is master block is a type of food. Detail block is list of ingredients.When creating a new type of food, if it's = CAKE we insert records based on a select on another table into the ingredients table.Else, the user has to manually create the ingredients.
Upon commit of the form on master block (must be saved to enable detail block tab), the ingredients are not displayed but are there. If I execute query by hitting F8, the records are present.
Why is the populate-details trigger not being fired or what am I missing?
We are using Oracle 10g and have 10 tablespaces defined for our Database which have 108 tables. Size of 108 tables is around 251 MB as seen during importing the dump. While creating these 10 tablespaces I used below parameters for allocation of space
SIZE 1M REUSE AUTOEXTEND ON NEXT 1M MAXSIZE 1M;
which set the initial space for 10 tablespaces to around 1032Kb each. Now my Question is after importing the dump , how the disk space for 10 tablespaces increases to 398 MB in total ?
Is there any relation of Tablespace disk space and Actual Data present in the tables ?
I have a requirement to get the data in "SQL" directly and should not use plsql/ can't redirect the output to a .sql file. I have a master table Main_tab which does have all "child table" names.
I want to build a query such that it will give all the data from child tables.
create table main_tab ( tab_name varchar(10));
insert into main_tab values ('one');
insert into main_tab values ('two');
insert into main_tab values ('three');
create table one ( a char);
insert into one values ('a')
create table two ( b char);
insert into two values ('b')
create table three ( c char);
insert into three values ('c');
Now I have got the query to combine all the table data using
select decode (rownum,1,'','union all ') || 'select * from ' || tab_name example from main_tab
but I am expecting the output to get as
a
b
c
which is the data from tables one,two and three respectively.
I don't want to save the above select data in to .sql and then execute it , instead I want to run it on "fly" in SQL itself. Is there such a possibility to do so?