I have a table with the following column and data is like this.
SQL>CREATE TABLE test (
column1 varchar2(50));
SQL>INSERT INTO test VALUES('ABC XYZ');
SQL>INSERT INTO test VALUES('MNO PQR');
SQL>INSERT INTO test VALUES('ABCD ABC');
SQL>INSERT INTO test VALUES('PQR MNOP');
[code]....
Is there any function to count number of specific character inside string. For example :
my string is 'ABCEF AYZA'
I want to calculate how many 'A' exist in my string. result should be = 3
I need writing sql which can return the Count of Comma's in a string. Here is my table and data
CREATE TABLE TEST1(SNO NUMBER,STR1 VARCHAR2(30));
INSERT INTO TEST1 VALUES(1234,'ABCD,LL LT,MP');
INSERT INTO TEST1 VALUES(1456,'PP MR');
INSERT INTO TEST1 VALUES(1589,NULL);
INSERT INTO TEST1 VALUES(1897,'PP MR,FTR CLR ON');
Here is the output I am expecting
SNO STR1 STR1_COUNT
1234 ABCD,LL LT,MP 3
1456 PP MR 1
1589 0
1897 PP MR,FTR CLR ON 2
Basically I need to the count of Words separated by comma
I have table with the values as below.
C1C2C3C4
NAMEJOHN10ABC
NAMESMITH30DEF
NAMEROBERT60XYZ
I dont want to print the repeated value(NAME) of C1 multiple times as below.
C1C2C3C4
NAMEJOHN10ABC
SMITH30DEF
ROBERT60XYZ
I could do it using the below query using union with the rownum.
select * from (
select rownum rn, c1,c2,c3,c4 from table_new
) where rn =1
union
select * from (
select rownum rn, decode(c1,null,null),c2,c3,c4 from table_new
) where rn between 2 and 3
Is there any other way of displaying using a single sql query.
I have a table where i have description column which free text column, the data in description column is seperated and i want to corvert 1 row data in multiple rows dependeing on the number of words.
eg
id description
78664 Pumps Alarm from CAMS RTU154
In the above example this column has 5 word so i want data in 5 rows like below
78664 Pumps
78664 Alarm
78664 from
78664 CAMS
78664 RTU154
This column data can be varied from 1 to any number of words.
My requirment is to find the top 20 most occurred words in the perticular text column accross the full table. i WILL have desc column which is plain text where user wites the essay. i have below 2 data example where i have 2 find which word occur most of the time. i have more than 1 million data where i have to perfor this calculation
E.g
INCIDENT_NOINITIAL_SD_FAULT_DESC 70000030 late entering service on the outer rail causing a 4 minute delay. After speaking to the Hainault DDM and the Hainault DMT it has been established that 70000031E105 on entering into platform by one cars lenght applied emergency brakes to stop the train due to a person under his train. Train stopped with two cars still outside the platform. I received a call from Line Controllor at 0823 hrs that a person has jumped in front of train 105 at Greenford. I informed Ian Williamson Train Operations Manager. We traveled on a special taxi with a spare Train Operator at 0839hrs and reached Greenford Station at 0859hrs. Emergency Services ( Police, London Ambulance, London Fire Brigade and ERU)
CREATE TABLE tbl_incd(
INCIDENT_NO NUMBER ,
SD_DESC VARCHAR2(4000 BYTE)
)
data for the above table
Insert into tbl_incd ( INCIDENT_NO, SD_DESC)
Values
(70000031,
'E105 on entering into platform by one cars lenght applied emergency brakes to stop the train due to a person under his train. Train stopped with two cars still outside the platform. I received a call from Line Controllor at 0823 hrs that a person has jumped in front of train 105 at Greenford. I informed Ian Williamson Train Operations Manager. We traveled on a special taxi with a spare Train Operator at 0839hrs and reached Greenford Station at 0859hrs. Emergency Services ( Police, London Ambulance, London Fire Brigade and ERU) were already on site. When spoken to Line Controlllor stated he received a normal radio call from E105 to inform him that he has got a person under his train. At 0826 Line Controllor had traction current switched off between Northolt and Greenford. Train service was suspended from North Acton to West Ruislip in both directions (east and west).
I could not speak to the Train Operator as Police was in the process of interviewing him and he was too traumatised to speak. Trauma Support was arranged from Loughton as we had no one available at West Ruislip and White City. Trauma Support spoke to T/OP over the telephone and Train Operator decided to travel in a special taxi which was booked for him on his own, although a Station Staff was was arranged to travel with him. During the process a spare T/OP stayed with this T/OP. When spoken to Mr. Clack Operations Security Manager stated he was traveling on this train from West Ruislip and made a telephone call to Network Operations Centre at 0826hrs to inform them of the situation. Mr. Clack travelled to the leading cab and confirmed that although the T/OP was badly shaken but he carried out his duties in a professinal manner by placing Short Circuiting Devise in front of the train and second SCD was placed on the rear of the track by Station Supervisor after traction current was discharged. Passengers were detrained by operation butterfly cock. Les Blaxwall Operations Standards Manager was also travelling on this train and offered his to T/OP. Mr. Blaxwall assisted in the wrong direction move and stayed till the end of the operation to assist. Wrong Direction move was carried out by T/OP Martin to assist emergency services for the track search. The deceased was an elderly of Asian origin approximately of 65yrs of age wearing white shirt, beige trauser and white trainers. When CCTV was viewed he was seen pacing up and down on the east bound platform near the waiting room. On approach of T105 he jumped in front of the train at 0824hrs and train stopped with two cars outside the station. The body was removed from platform at 0940hrs by ERU and taken in a body bag to the secure room at Greenford Station. Track was accessed by BTP to carry out track search for any trace of identification at 0932hrs and gave all clear at 0942hrs.
TOM Williamson assisted in closing the train doors by operating the butterfly cock to close position. Traction Current was switched on at 0948hrs and T105 was worked empty to North Acton and reversed to Ruislip Depot. All clear was given at 0951hrs and after station search, Greenford Station was re opened at 0955hrs. E142 was the first train to run in service on the east bound. Body was removed at 1013hrs from Greenford Station and taken to Uxbridge by the police. Trauma Support was offered to Station supervisor by his DSM, but he declined the offer. Service Manager and Line Controllor were kept informed by myself.');
Insert into tbl_incd ( INCIDENT_NO,SD_DESC)
Values
( 70000032'PART OF TRAIN WITHDRAWAL Train 17 had a 6 min delayed departure from White City due to the train having a defective speedometer. Train was changed over and dud train was sent to Ruislip Depot for the attention of the DDMs staff. Ruislip DDM confirmed that the speedometer was defective. This was traced to a defective ATP controller.');
Insert into tbl_incd ( INCIDENT_NO, SD_DESC)
Values
( 70000033,' had a 1 min delayed arrival at Ealing Broadway due to the train having problems at signal EAB2058. The T/op stated that the train was in ATO and was stopped at the red signal (2058). The signal cleared and the train moved forward, the signal went straight back to red and the train stopped. This happened once again. The train did not pass the signal. T/op contacted the Line controller via radio and the signal was cleared, with the train proceeding into the platform at Ealing Broadway. The train was taken to Hainault for the attention of the DDM and a download. Train download and Tracker net confirm the T/op`s account of events. Due to the serious implications of events, an investigation is being undertaken by the Duty Engineer at Wood Lane. The T/op carried out his duties in a professional and correct manner and informed the passengers of the situation as and when required.');
COMMIT;
I am having issue with Oracle reserved words, one of the application is using table which has NUMBER as column. I am not able to query that table matching database with NUMBER column.
HERE
select a.*
from DOC a , FOLDER B
where a.NUMBER= B.INCIDENT_ID
and b.open = 'Closed'; I tried double quotes (“”) and sigle quotes too, none of them worked.
I have a porblem. I have one table with the following strucuture:
col1 varchar2(30)
col2 varchar2(30)
col3 varchar2(30)
col4 varchar2(30)
In each record of the table some of the columns have 'UNDEFINED' as column value.
I need to count COLUMN WITH 'UNDEFINED' as column value in each record.
I have a query in oracle report in which i am getting this output.Manager Arnav have 2 employees Inder and kaushal whose salary is 10000 and 20000 respectively,
And another manager is Anjali whose employees are Kavya and inder whose salary is 40000 and 10000 respectively .as Inder is repeated I want the salary become 0 in place of 10000 second time.I am in dilemma,What should i do ,if i want to change 10000 to 0
Manager employee salary
Arnav Tiwari Inder 10000
kaushal 20000
Anjali Kavya 40000
Inder 10000[/b]
What should i do in the formula of salary.according to employee name .means if Name exists already then salary value should be 0 and if it comes for the 1st time then its actual value i.e 10000 should be printed.
Need a query to find the count of presence of delimiter "," in column VAL for below mentioned table.
Table:
CREATE TABLE N_B_S_1
(
NUM NUMBER,
VAL VARCHAR2(20)
)
Data:
INSERT INTO N_B_S_1 VALUES(1,'A,B,C');
INSERT INTO N_B_S_1 VALUES(2,'D');
INSERT INTO N_B_S_1 VALUES(3,'ER,NF,G,H,XK');
INSERT INTO N_B_S_1 VALUES(4,'LQW,MBV');
INSERT INTO N_B_S_1 VALUES(5,'KS,YJ,WE,RQ,PM');
COMMIT;
Required output:
num, count of delimiters
===== ===========
1 2
2 1
3 4
4 2
5 4
I'm going to do some testing, and for that I require to retrieve some data based on a single column e.g test_data_col, which -
1. Has 3 or more count(test_data_col) for a given set of group by columns e.g grp_col1, grp_col2, grp_col3
2. Within the set of rows retrieved, that particular column holds some duplicate values. I don't need the duplicates displayed, just know if duplicates exist or not.
This might explain what I'm trying to do -
grp_col1, grp_col2, grp_col3, test_data_col
1, A, xyz, HELLO
1, A, xyz, HELLO
1, A, xyz, BYE
1, A, xyz, GOODBYE
2, C, pqr, WELCOME
2, C, pqr, GOOD MORNING
2, C, pqr, BAD MORNING
So for condition 1, I do something like this -
SELECT COUNT(test_data_col) cnt, grp_col_1, grp_col2, grp_col3
FROM test_tab
GROUP BY grp_col_1, grp_col2, grp_col3
HAVING COUNT(test_data_col) >= 3;
In this same query, I want to do something that will tell me if the aggregate COUNT(test_data_col) has any duplicate values within it. Again, displaying the duplicates is not important here.
SELECT COUNT(test_data_col) cnt, grp_col_1, grp_col2, grp_col3,
/*some logic*/ dup_val
FROM test_tab
GROUP BY grp_col_1, grp_col2, grp_col3
HAVING COUNT(test_data_col) >= 3;With the proper coding to replace /*some logic*/, I get following values -
cnt, grp_col_1, grp_col2, grp_col3, dup_val
4, 1, A, xyz, Y
3, 2, C, pqr, N
I just gave dup_val column to explain what I'm trying to achieve.. any other way to know the existence of duplicates in the count aggregate will be fine.My Oracle version is Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
i want to count group above report records! want to count department group employees there in time is not null!
my report query
SELECT div.division,
DEP.DEPARTMENT,
DEP.STRENGTH,
E.EMPLOYEECODE,
E.NAME,
DES.DESIGNATION,
[code].....
im doing it with formula column!
function CF_PRESENTFormula return Number is
v_emps number;
begin
select count(1)
into v_emps
[code]......
I have two tables with below structures.
desc Fault_Dim
Name Null Type
------------------- -------- ------------------
KEY NOT NULL NUMBER(38)
SYSTEM_NAME VARCHAR2(3 CHAR)
PRIORITY VARCHAR2(40 CHAR)
SEVERITY VARCHAR2(40 CHAR)
TYPE VARCHAR2(40 CHAR)
STATUS VARCHAR2(40 CHAR)
CREATE_DT DATE
SUBTYPE VARCHAR2(255 CHAR)
[code]...
The Severity column has values as below 1,2,3, My requirement is to show results as in the attatched image.Where the count values are values from TOTAL_fault column from the fact table.
I believe this is possible in hierarchial queries and pivorting
I have two tables one source table and one destination . Column names and data types of both table are same.
source table (source)
ID NAME
1 aa
2 bb
3 cc
. ...
. ..
. ..
destination Table(dest)
ID NAME
1 aa
2 bb
I need destination table like
destination table
ID NAME
1 aa
2 bb
3 cc
. .....
. ....
I want to remove repeated rows
i nee a function which accepts 4 digit number and in four digit number the number should not be repeated. i want all the number in the output.
ex:1234
2367
1262(is not valid)
In my report I'm using inner join in queries .I got correct record but itz repeated.How to deduct that repeat values?
this is my query:
SELECT f.feeid,
f.studentid,
( s.first_name + last_name )AS studentname,
b.branchname,
c.coursename,
y.yearname,
[Code].....
I have a query that seems to repeatedly call an index scan on a table for reasons I'm not sure about. Why it would be doing the index scan on totaldwellingarea in the dimensions table (DIMEN_PID_TDWELLAREA) repeatedly? This only seems to happen when I put on the range clause d.totaldwellingarea between scr.lowvalue and scr.highvalue.
I am using Oracle version 9.2.0.3.
select d.propertyid,d.totaldwellingarea, e.size_, scr.size_
from eqid e, dimensions d, brt_eval.size_code_ranges scr
where e.style not in ('1','A','G','L') and e.size_ = '0'
and d.propertyid = e.propertyid and e.style = scr.style and d.totaldwellingarea between scr.lowvalue and scr.highvalue;
CREATE
TABLE "BRT_ADMIN"."EQID"
(
"PROPERTYID" VARCHAR2(20 BYTE) NOT NULL ENABLE,
"EQID" CHAR(10 BYTE),
"ZONE_" CHAR(1 BYTE),
"AREA" CHAR(1 BYTE),
[code].....
After running my report I generate into the file by delimited type and then I save as it by XLS extension.The problem is each row of this excel file has header repeatedly!
View 4 Replies View RelatedI am using below code to spell number in words
create or replace
function spell_number( p_number in number )
return varchar2
-- original by Tom Kyte
-- modified to include decimal places
[Code]....
The number amount is : 9899.25
I am getting the output is:
NINE THOUSAND EIGHT HUNDRED NINETY-NINE POINT TWO FIVE
But i want output should be
NINE THOUSAND EIGHT HUNDRED NINETY-NINE AND Twenty five FILS ONLY
where i need to modify the code.
Files is equal to cent as per DOLLOR currency
I tried to convert numbers to words, it shows the below error.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jul 6 11:00:29 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> SELECT TO_CHAR (TO_DATE (2447834, 'j'), 'jsp') FROM DUAL;
TO_CHAR(TO_DATE(2447834,'J'),'JSP')
---------------------------------------------------------------------------
two million four hundred forty-seven thousand eight hundred thirty-four
SQL> SELECT TO_CHAR (TO_DATE (244783400, 'j'), 'jsp') FROM DUAL;
SELECT TO_CHAR (TO_DATE (244783400, 'j'), 'jsp') FROM DUAL
*
ERROR at line 1: ORA-01830: date format picture ends before converting entire input string
SQL>
I found a message which explain how to spell out numbers to words. I'm french and the purpose of my question is how to convert numbers to word (to print cheque) but in french the function found in the newsgroup was :
select decode( sign( &num ), -1, 'Negative ', 0, 'Zero', NULL ) ||
decode( sign( abs(&num) ), +1, to_char( to_date( abs(&num),'J'),'Jsp') )
from dual
/
I'm afraid but i don't undaunted how pass my number to this function (&num ???)
i am in need to find starting two words matching like i have string "my name is person". i want starting two words find "my name". i tried with this
SELECT T.FULL_NAME,SUBSTR(t.full_name,0,INSTR(t.full_name, ' ')-1+INSTR(t.full_name, ' ')-1) AS outpu2
FROM test t
output: it's giving me the out put but not in proper way som where the second word is cut off and some where first word is not coming.
I have given below example.I hope that is clear.
M_STR_1 VARCHAR2(1000);
M_STR_2 VARCHAR2(1000);
BEGIN
M_STR_1 :='CHANDAN,RATTAN,PL,SQL';
M_STR_2 :='PL,SQL,RATTAN,CHANDAN,WINDOWS,LINUX';
--Output should like this same as order of M_STR_1
M_STR_2 :='CHANDAN,RATTAN,PL,SQL,WINDOWS,LINUX';
I think approach should be like take 1st word (before ,)and search the position in M_STR_1
and assign the that position in another variable using ltrim or rtrim. Well this what is i think
How can i insert any character or symbol automatically after writing 2 words
E.g.
i want to enter date 20-may-06 , in this i mean it that when i enter 20 then automatically - is inserted.
is there any query in Oracle. Or Oracle Hasn't created this type of query.
When integrating your product with third-party APIs I've repeatedly come into conflict with PLSQL and Oracle's reserved words list. For instance while integrating the clickatell SMS Message Transmission notification API there are two variables they send.
[URL]......
How do you propose PLSQL handles these requests without using Apache to rewrite the variable names, or using the three and four variable pslql variable collection methods.
wrote a code that display the first 10 words from a string.
View 15 Replies View Relatedfind two words matching from two different tables.
Example:-
table1 || table2
john Dev || Kab Leva
Zaheer khan || mark dev
Cina maater || jhon dev wood
kab leva Sumo || Tony levis
output:-
john dev || john dev
kab leva || kab leva
In the table the names are having diffrent spaces for one name only one space between the words,for another name two spaces between words,for other names three spaces between the words.
I want to update with single space how can we that.
I am giving the data as follows.
CREATE TABLE student(sname VARCHAR2(30));
INSERT INTO student VALUES('PRAKASH BABU');
INSERT INTO student VALUES('RAJESH KUMAR');
INSERT INTO student VALUES('POORNA CHANDAR');
INSERT INTO student VALUES('ANIL RAJ');
INSERT INTO student VALUES('ABHI RAM KONA');
INSERT INTO student VALUES('SRI TEJA MEDI');
Like this the table contains millions of rows.
I want to update the names like this.
PRAKASH BABU
RAJESH KUMAR
POORNA CHANDAR
ANIL RAJ
ABHI RAM KONA
SRI TEJA MEDI
I'm trying to match all sentences that contain words starting with given search tokens at least once. For example: if the given search token words are one and two then only sentences like "one plus one is two" should match. And should not match sentences like "one plus three is four". I was able to come up with this but I need a AND condition which I'm unable to get it right.
select count(*) from dual where regexp_like('one plus one is two', '(^|s)one|three', 'i');
Currently this gives a count of 1. But needs to give a count of 0 when the regexp is fixed.
search words : one two
one is less than two -> match
two is greater than one -> match
onetwo is union of two numbers -> match
onetwo is union of 2 numbers -> not a match as 'two' is not at the beginning of a word
one is less than three -> not a match as two is not present.
I have the following table and data , So i want to update this table(word column) with words that has same soundex with one word of them, the word must be that has the long length if the two words has same length So, update by any of them.
drop table t1;
create table t1 (id number(10) ,word varchar2(100));
insert into t1 values(1,'Londn');
insert into t1 values(2,'Egypt');
insert into t1 values(3,'London');
insert into t1 values(4,'Gorgey');
insert into t1 values(5,'Michal');
insert into t1 values(6,'Michel');
insert into t1 values(7,'London');
insert into t1 values(8,'Egpt');
insert into t1 values(9,'Londan');
insert into t1 values(10,'Gorgy');
insert into t1 values(11,'Gorge');the results must be as following
id word
1 London
2 Egypt
3 London
4 Gorey
5 Michal
6 Michal
7 London
8 Egypt
9 London
10 Gorey
11 GoreyNote: this is the results of soundex
SQL> select soundex(word) from t1;
SOUN
----
L535
E213
L535
G620
M240
M240
L535
E213
L535
G620
G620
11 rows selected.