I've a 6 column report where col5 is set to expand vertically (based upon comments) and works wonderfully. Col6 is a single character column, therefore does not expand so the report looks rather messy.
I would like col6 to expand in accordance to col5. Is it possible?
i have two questions.
(1) how can i fill some value in a table column based on some existing column value automatically without user intervention. my actual problem is i have 'expiry date' column and 'status'. the 'status' column should get filled automatically based on the current system date. ex: if expiry date is '25-Apr-2011' and current date is '14-May-2011', then status should be filled as 'EXPIRED'
(2)hOw can i build 'select' query in a report (report 6i) so that it will show me list of items 'EXPIRED' or 'NOT EXPIRED' or both expired and not expired separately in a single report based on user choice. 'EXPIRED' & 'NOT EXPIRED' can be taken from the above question no. 1.
how can i set the alignment of the text field in report 6i.
View 10 Replies View RelatedI need to customize an oracle report and I am not able to find the header section when I click on the header section in the paper layout. The header info is not on the main section either. But when I run the oracle conc prog the header seciton gets printed. I verified the rdf file if it was correct- it is.
View 4 Replies View RelatedI have a doubt that can we make a report on sum of the salary record wise and grouped by dept number?
like as shown BELOW
Dept No Dept Name
10 Accounting
Employee ID Name Salary Sum Salary
7782 CLARK 2450 2450
7934 MILLER 1300 3750
7839 KING 5000 8750
Dept No Dept Name
20 Research
Employee ID Name Salary Sum Salary
7369 SMITH 800 800
7788 SCOTT 3000 3800
7902 FORD 3000 6800
Dept No Dept Name
30 Sales
Employee ID Name Salary Sum Salary
7844 TUNER 1500 1500
7499 ALLEN 1600 3100
7521 WARD 1250 4350
7900 JAMES 950 5300
emp table
Name Null? Type
----------------------------------------- -------- ------------------
EMPNO NOT NULL NUMBER(4)
ENAME VARCHAR2(10)
JOB VARCHAR2(9)
MGR NUMBER(4)
HIREDATE DATE
SAL NUMBER(7,2)
COMM NUMBER(7,2)
DEPTNO NUMBER(2)
dept table
Name Null? Type
----------------------------------------- -------- --------------------------
DEPTNO NOT NULL NUMBER
DNAME VARCHAR2(15)
LOC VARCHAR2(15)
I have some transactions in my table with date and time.
i want to pass from date, to date and from time , to time as parameter.
when i pass one date and two time parameters, it works fine. but when i try to pass from date and to date (two date parameters) and two time parameters then it does not work accurately.
e.g. i want to pass 05-Aug-2010 and 06-Aug-2010 and time from 08:00:00 and 14:00:00 then it only retrieves data of both dates having only this time range. however i need to get transaction of 05-aug-2010 from 08:00:00 to 06-aug-2010 14:00:00.
See my data
Location--------Employee-------------Sales-----------------------Sales per emp
1------------------ 4-----------------------100------------------------------25
2------------------ 5-----------------------120------------------------------20
3------------------ 7-----------------------210------------------------------30
Total---------------16-----------------------430-----------------------------27
The total 27 achieve by (430/16)=27 How can I get using ORacle BI Discoverer 11g Desktop
I need to design a report out of the below data:
1. bprf_no will be my primary field
2. report parameters will be the bill_month & no_of_months
Based on above 2 parameters I need to scan through the data for BILL_MONTH <= '20-Jun-2012' and NO_OF_MONTHS <= 6 the other criteria being the AVG_IND in (1,2).
In brief the criteria will be to pick all BPRF_NO having AVG_ID in (1, 2) consecutively till a break (AVG_IND not in (1, 2) starting from the given BILL_MONTH and going below this period, that is BILL_MONTH <= '30-Jun-2012'.
For the below data, if my parameters are: BILL_MONTH <= '30-Jun-2012' and NO_OF_MONTHS <= 3, only the underscore added data should be picked (as they fulfill the criteria) and the report output will be like:
BPRF_NO BILL_MONTH NO_OF_TIMES
-------------------------------------------------
BP05 30-Jun-2012 6
BP06 30-Jun-2012 6
BP07 30-Jun-2012 6
BP08 30-Jun-2012 6
Here the NO_OF_TIMES is the count, that is no of times the BPRF_NO falls into the above mentioned criteria consecutively starting from the provided BILL_MONTH.
BPRF_NOBILL_MONTH VOID_STATUS AVG_IND
------- ----------- ------------ --------
BP0130-Jun-1200
BP0230-Jun-1200
BP0330-Jun-1201
BP0430-Jun-1201
_BP0530-Jun-1201_
_BP0630-Jun-1202_
[code]....
My below query is fetching me wrong data:
----- Query -----
select bprf_no, no_of_month--count(*)
from
(
select a.bprf_no, count(*) no_of_month
[code]....
Here BP03 & BP04 should not come into the listing itself.
I have Two Parameters like 'YES' & 'NO'
when parameter is YES, column having values
when Parameter is NO, column having no values
In this scenario, how can i skip the column with space when parameter is NO because the column exist in middle of columns in report and Present with space when parameter is YES.
how can i print the stored images in reports 6i from database, based on the condition,that suppose if i have one field approval status whose flag is either 3 or 1 , based on this flag ,if the status is 3 then image should be displayed otherwise no. the rest of the process.
CREATE TABLE FT_GALVA (GALV_NO VARCHAR2(2),GALV_APPR_ST NUMBER,img_name varchar2(30),PIC_GALV BLOB)
Create or Replace directory image_dir as 'e:image_dir';
Grant all on directory image_dir to public
/* Formatted on 2013/04/25 23:50 (Formatter Plus v4.8.8) */
CREATE OR REPLACE PROCEDURE insert_image_file (
p_id NUMBER,
p_status NUMBER,
[Code]....
I have one view which displays the information of all the receipts with date now i want to make ageing report based on this date. the columns will be 0-30 , 30-60,60-180 and > 180 , i want to distribute the receipts qty based on number of days.
View 1 Replies View RelatedI'm using Report Builder 9.0.4.0.33.
I am creating a report which generates the data to a PDF/CSV based on users Input.When I create the report using Report Builder and execute the report,Delimited data appears in a PDF layout.
But if I add the below code in After Parameter Form trigger,the column headers keeps repeating with the data.
function AfterPForm return boolean is
begin
IF :P_DESTYPE = 'CSV' THEN
:MODE :='DEFAULT';
:DESFORMAT:='DELIMITED';
Elsif :P_DESTYPE = 'PDF' THEN
:DESTYPE := 'CACHE';
:DESFORMAT:='PDF';
END IF;
return (TRUE);
end;
[code]....
But the PDF output seems fine where the header is shown only once.I could see many posts regarding this in Oracle reports 6i wherein delimited_hdr=no is used in Command Line but I would like to know the work around in Oracle reports 10g.
I want to show closing balance as opening balance by using place holder column
example
Date opbal sale closing bal
01-jun-2013 0 10000 10000
02-jun-2013 10000 5000 15000
how to do this
I receive the error,
REP-1241 Circular column dependency originating with column 'cenvat_opening'
I have the following return statement for a column total_credit;
function total_creditFormula return Number is
begin
Return (return nvl(:cf_cenvat_closing ,0) - nvl(:cf_duty_on_goods_ed,0);
end;
Now i am using this total_creditFormula for the error formula column 'cenvat_opening'
function cenvat_openingFormula return Number is
f_num_opn number(14,2);
begin
SELECT NVL(Amount,0) INTO F_NUM_OPN
[code]...
here the formula column 'total_credit' has the following return statements;
RETURN Nvl(:cenvat_opening,0) + Nvl(:cenvat_credit_manu,0)
so how can i use this formula column? is there any other option to return the value in the same column.
This is what i want to do:
I have a basic report looking like this:
<Column name>
value 1
value 2
value 3
.
.
.
value n
Since the column is small it can fit in a page more then one time. I know how to make it print more then once: i switch the repeating frame to print down and across and i modify the frame that contains it so the horizontal elasticity is variable.
After these changes my report looks like this:
<Column name>
value 1-----------------------value n+1-----------------------value m+1
value 2-----------------------value n+2-----------------------value m+2
value 3-----------------------value n+3-----------------------...
.------------------------------- .
.------------------------------- .
.------------------------------- .
value n-----------------------value m
What i want is my report to look like this:
<Column name>-------<Column name>------------<Column name>
value 1-----------------------value n+1-----------------------value m+1
value 2-----------------------value n+2-----------------------value m+2
value 3-----------------------value n+3-----------------------...
.------------------------------- .
.------------------------------- .
.------------------------------- .
value n-----------------------value m
I want to create matrix report with 2 column
we can assign one column in matrix report my req is to assign 2 column .
example
Row Is FND
columns are Cdate & Ldate
Cells are Crate & Lrate
CDATE CDATE CDATE CDATE LDATE LDATE LDATE
FND 01-MAR 02-MAR 03-MAR 04 MAR 28-FEB 31-JAN 31-DEC
-------------------------------------
ABC CRATE CRATE CRATE CRATE LRATE LRATE LRATE
ABC CRATE CRATE CRATE CRATE LRATE LRATE LRATE
ABC CRATE CRATE CRATE CRATE LRATE LRATE LRATE
XYZ CRATE CRATE CRATE CRATE LRATE LRATE LRATE
XYZ CRATE CRATE CRATE CRATE LRATE LRATE LRATE
XYZ CRATE CRATE CRATE CRATE LRATE LRATE LRATE
display values in descending order( as got from fomula column). i put that field in above group and got properly. now i want to sum these values at the end of report. its going to some distinct values, while i want all values to be sum.
View 1 Replies View RelatedI would like to know how can i add a column in existing report. I try to change SQL by doing this it does add that new column into group but when i try to run report i can not see that changes . then i try to do some changes in paper layout but i am not able to bring the changes in out put. i am new to this FORMS Reports . do i have to create a group again i am how can i change the layout in that report.
View 4 Replies View RelatedHow can i stretch field dynamically as per the requirement.
i use horizontal elasticity and also format trigger on the field but cant find the expected output.... How can i achieve the same...
1 problem regarding to oracle report 6i.
I have to hide a repeating frame based on different condition
like DEPTCODE = 1 THEN
return('true');
else
return('true');
end if;
there is 4 record when we select DEPTCODE = 1 and there is 25 records when we select DEPTCODE = 2
now my problem is when I choose DEPTCODE=1 the summary of that report like sum of sal, avg of comm is calculated based in all 29 records.
it happen because of all the summary column is placehoder column not CS.
the calculation of all placehoder column is complex I cant convert it in simple CS.
so how can it possible when i choose DEPTCODE=1 and it shows me summary of only 4 records.???
i know the procedure "DBMS_SQL.DESCRIBE_COLUMNS" and the example,the example uses the "dbms_sql.open_cursor",not the ref cursor. so how to get the information of ref cursor by using describe_columns? or how to get the information of ref cursor by other?
View 4 Replies View RelatedI want to design a report in different numeral(English,Arabic). I am using application server as a middle tier.
Like
empno name salary english salary arabic
34232 John 5000 in arabic digits
45454 Clark 6500 in arabic digits
I have already change environment as a parameter Eng to Arb or vice versa. but i need both language digits at a time.
I have wrote this code behind a formula column which take the image from a server. The name of the image and location is carried out from database. When ever there is new record new name of the image is posted in this formula column. But when the file is not present in the location it gives error. When the error occur i cant able to view the report. The error says 'You cant run the report without layout'. When all images are present in the directory then report runs fine.
function CF_QID_IMAGE return Char is
l_file_exists BOOLEAN;
l_file_len NUMBER;
l_blocksize BINARY_INTEGER;
image_link varchar2(50);
[code]...
I am facing a problem in leave_form report! want to show employee's previous leaves detail (leavedate,leavetype), i don't want to show leavetype 'PPP' repeating frame type is Across/Down, there are 22 records of leavetype 'PPP' and one record of leavetype 'CL'
problem is report is showing 22 records of leavetype 'CL' of same leavedate!
i want that report should show the actual leavedate and leavetype records.using 9i database 6i developer server2003
For leavetype
FUNCTION Cf_1formula
RETURN CHAR
IS
v_leavetype CHAR(40);
BEGIN
SELECT LT.description
INTO v_leavetype
FROM hrm_attendance L,
hrm_leavetype LT,
hrm_employees E
[code]....
i want to count group above report records! want to count department group employees there in time is not null!
my report query
SELECT div.division,
DEP.DEPARTMENT,
DEP.STRENGTH,
E.EMPLOYEECODE,
E.NAME,
DES.DESIGNATION,
[code].....
im doing it with formula column!
function CF_PRESENTFormula return Number is
v_emps number;
begin
select count(1)
into v_emps
[code]......
I have to set a matrix report as follow:
- in the rows the machine_id.
- in the column the material_lib.
Table material ( material_id,material_lib,ordre)
- in the cells quantity.
I get successfully my matrix through the wizard of report, but i should display the columns sorted with the field ordre.
how to get the columns of the matrix sorted.
I am working on a report which shows a summarized data from 4 different tables. I have 2 columns which shows certain amount.
The data in both the columns comes from different table.
I want to compare these 2 columns for which i placed a formula column in data model. the code goes this way:
function CF_RECV_PAYFormula return Character is
V_RESULT VARCHAR2(50);
begin
IF :TOTAL_IOU_AMT >= :EXP_AMT THEN
[code].....
The compilation is successful. but when i am running the report i am getting an error Rep-1517 :Column 'CF_RECV_PAY' references column TOTAL_IOU_AMT and EXP_AMT has incompatible frequency.
Recently I am facing a problem while working with Oracle reports 2.5.
My requirement is:
there is a report in which there are 5 columns right now. Now what i want is, whenever a condition will satisfy , a new column should be also display in that report otherwise it must be stay as it is.
Previously : a b c d
Now if a=1 : a b z c d
else
a b c d
where a,b,c,d,z are columns.
I need to accept value for some variables using substitution variable. I have a number of variables for which I need to take the value on run time. I need to prompt a parameter based on the value provided earlier.
For example;
There is prompt to enter country. If the user enters country as India it should prompt for the state else it should not prompt for state.
How can this be handled in SQL?
I have written this code below in Disco Admin 10g but get Ora-00918 column ambiguously defined error even though I have used alias in the table name.
Select
porh.segment1
,Porh.creation_date
,Porh.last_update_date
,porh.closed_code
,porh.authorization_status
,porh.description
,porh.note_to_authorizer
,porh.cancel_flag
,porh.enabled_flag
,porl.line_num
[code]....
