i want to count how many check boxes are chechked and if the check box is unchecked the count will decrease as soon as checkbox is check or uncheck.the number of chech boxes are depentdent on record set that are fetched from database.
I am installing 11gr2 11.2.0.2 grid infrastructure software. while running root.sh on node1 it got failed.
Start of resource "ora.crsd" failed CRS-2672: Attempting to start 'ora.crsd' on 'rac1' CRS-5017: The resource action "ora.crsd start" encountered the following error: Start action for daemon aborted CRS-2674: Start of 'ora.crsd' on 'rac1' failed CRS-2679: Attempting to clean 'ora.crsd' on 'rac1' CRS-2681: Clean of 'ora.crsd' on 'rac1' succeeded CRS-4000: Command Start failed, or completed with errors. Clusterware exclusive mode start of Clusterware Ready Services failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6475. /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
************************************* [root@bsfrac01 grid]# sh root.sh Running Oracle 11g root.sh script...
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name 2011-02-13 00:11:55: Checking for super user privileges 2011-02-13 00:11:55: User has super user privileges
Every time interconnect IP ping failed between RAC servers,CRS causing reboot to the server. As documented,it is of 3 sec. Can we alter this setting to increase the ping failed (private IP) by more than 3secs.
The installation of CRS is successfull & at end it ask to execute 2 scripts on both nodes i.e. orainstRoot.sh and root.sh
When the scripts are executed,the execution of orainstRoot.sh is successfull , but root.sh give following error:
[root@rac2host crs]# ./root.sh WARNING: directory '/home/oracle/product' is not owned by root WARNING: directory 'home/oracle' is not owned by root Checking to see if Oracle CRS stack is already configured /etc/oracle does not exist. Creating it now.
[code]....
Is this concerned with permissions on OCR, Voting Disk.
RAC installation on vmware is failing with following errors. I followed below link for installation. URL..... Found the following errors:
[root@rac2 ~]# cd /crs/oracle/bin/ [root@rac2 bin]# ./vipca PRKR-1062 : Failed to find configuration for node rac1 PRKR-1062 : Failed to find configuration for node rac1 [code]....
The "/crs/oracle/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.The "/crs/ oracle/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
[root@rac2 bin]# /crs/oracle/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200 [root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect PRIF-10: failed to initialize the cluster registry [root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect PRIF-10: failed to initialize the cluster registry
On a page I have let's say 5 rows (can be more or less) and each row ends with a checkbox. On the next page(next prcodure) I go through all rows, but I get a "No data found" when a checkbox is not checked. Checkbox's parametre is send using an array.How can I make sure is a checkbox checked or not. If it's not, I put a formHidden through in it's place?
I am working on form builder 6i. I have multi record datablock 't1'.' I have 'Submit' Button, which contains 'commit_form'. I am able to insert records.
Now i have a check box in data block, i want to insert records which are checked. I followed below thing to achieve that.
ON-INSERT Trigger:
If check_box ='Y' THEN INSERT_RECORD end if.
SUBMIT BUTTON: commit_form.
Let us say, i have 5 records, 2 records are checked, after clicking SUBMIT button, it's inserting 2 records only. But in console window, it's showing '5 transactions are saved'. I want see '2 transactions are saved' message in console window.
How to get it or any other solution which will insert records which are checked and show correct message in console window.
I got that error bur I checked all the fields on RG query and they are not more 300 char in total. Even I changed the query but I still get this error.
I have a multi-record block with a check box(:B_ASTHEAD.CB_CHECK) for each record. user can select the record by clicking on the check box. when checked, value is 'Y' and when unchecked, value is 'N'.
when user clicks on 'OK' button (when button pressed trigger), the records which are selected(Checkbox) must be posted to the database table.
L_last_Rec number; L_first_Rec number; L_AST COP_DETL.AST%TYPE; BEGIN
[Code]....
The issue here is , check box selected records are not getting inserted into table when OK button is clicked and i could see that all checked checkboxes become unchecked immediately . But if i comment the --"if :B_ASTHEAD.CB_CHECK = 'Y' then " part, then insert works , but inserts all record.
I have datablock 'EMP', it's multi record block. I have a button 'CREATE', I have 'commit_form' in 'When button pressed' trigger, to commit records. It's working fine.
Now, i have a check box in the same block, i want to insert records which are checked only.
I'd like to determine (from code defined in a button definition) which check box(es) on a Tabular Form are checked. Assuming only one check box is checked, I want to obtain one of the values in that row for further processing. How to interrogate the Tabular Form to find out which box is checked?
how to use checkbox item, and trying to get checked options values via application global arrays. So, this may be quite simple question, but I'm completely stuck here...
When I was looking through various threads and guides, I've encountered checkbox corresponding array names like "g_f01" - "g_f50". And so far i saw that these names are derived from item name in generated HTML code, for example:
<input type="checkbox" name="*f10*" value="3" />
And this one stands for array name "g_*f10*".However, when I tried to do the same thing - i receive item name which looks like "*p_v04*", and therefore, I can't figure out, which array name should I choose to adress it properly.
We have implemented PeopleSoft with an Oracle database. What I need to do is provide clients with access to information stored in that database. Some additional information may come from other external databases, however for right now I am just trying to crawl, not run.
I am working on getting table information from the PS provider, so that I can understand what information is available. I am also working with the clients to determine if there are pieces of information that they need access to which are not currently native to the PS implementation. I need to identify these for step 2 of the process. My superiors were looking at using an SOA architecture using SOAP to move the data. I am open to suggestions and since the project is in its infancy, I have time to alter perceptions before it is too late.
I am doing a research for our next project.MIGRATING oracle forms6i to java/apex/adfi've gather documentations to present to my boss.but she wants an actual(hands on) migration without purchasing yet.
application that i can test?Is FORMS to .XML to JAVA? is that possible ?where topic my message belongs to.(that's why i've put in GENERAL topic)
have created or used a JavaBeans can interface with OpenOffice?
I modified the java classes and finally managed to create a document. Odt OpenOffice Writer and launch from Eclipse. If I am not using the libraries oooBeans but there are 2 problems now:
1. For known issues I had to set the Java class path of the folder where you have OpenOffice executables and should be changed ...
2. I created a. Jar file executable, but I do not know how to integrate Oracle Forms and use it as JavaBeans. Perhaps this step you're more prepared
I have a problem in oracle forms 10g, as a following: Arabic language show as special character for example(????,!!!!!!,....),I use now charcterset AMERICAN_AMERICA.WE8ISO8859P1 ,I cannot change this charcterset on my database Because I am afraid that the old data may be lost
Note: I am use now oracle form 6i without no problem in Arabic language and when I intended to converted to oracle form 10g ,the language problem has come back, and I was try to change nls_lang to several charcterset charcterset(Arabic_Egypt.AR8MSWIN1256 ,......) but still show in special character character like (????,!!!!!!,....)
I am completely new to anything with Oracle or OCI,
Also, basic information:
Language: C Oracle DB version: 11g
Trying to use OCI
I am trying to write a client that connects to an Oracle database and gets some information (obviously). On the OCILogon() step, I need the username, password, and db address. However, someone said there will be a tnsnames.ora file, and that should be enough.I've searched online and I have not been able to find anything that relates OCILogon() to tnsnames.ora, so here are my questions:
1) Can OCILogon() use tnsnames.ora at all? 2) Is there any other function that I should use instead of OCILogon() that would work with the tnsnames.ora
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Agent is running, dbconsole too. to the database through SQL Developer and SQL Plus connects. when you go to localhost:1158/em opens a BLANK PAGE that contains 2 "squiggles" view"|[ ]]" tried in different browsers, identical. a feeling that most web interface is physically not in folders.
I have employee interface table something like this.
emp_idemp_name Job_title supervisor_name 1AJ Engineer BJ 2CK Analyst ND 3BJ Manager TR 5TR VP IT JD 6ND S Manager MD 7MD VP Telecom SK 8SK VP Eng JR
I want to idenitfy the VP for each employee. The logic I have to apply is check for hte supervisor of each employee to see if the supervisor has designation starting with 'VP'. If no, I have check the supervisor of the supervisor and so on. I tried using a recursive query using connect_by_root but in the above example for employee ND it lists the VP as both MD and SK. I need it to show on MD who is the lower in the hierarchy.
I am a Java person but since my app uses the Oracle DB I am to do this task.
Actually i am not using OCI directly. I have a Delphi application in which I would need to clone an open db connection. Not only username, password, and target database (this is easy and i already do that).
What I would need is also inherit context variables and global temporary tables content status at the moment in which the cloning operation takes place. It seems a very difficult, if not impossible, thing to achieve.
