Performance Tuning :: Oracle 8i / Win NT - Creation Of Index On Columns
Mar 30, 2006
we have oracle 8i/win nt. (Prod Server running 24 X7)
On doing a explain plan on long running queries. i realized a couple of columns (that were used in the WHERE condition, were not having any indexes.)
More importantly, here we do not have a Test environment.
I would like to know if i can go ahead and create indexes for those 2 columns by issuing
CREATE INDEX index_name on table_name(Column_name);
on our PDB.
Would this be of any impact on our PDB? Do i check anything more prior to building these indexes. or Do have i create them at a down time of PDB.
View 4 Replies
ADVERTISEMENT
Aug 9, 2010
is there any way to reduce the index creation time.
in my case one index creation took 5 minute and there are 5 indexes , so it took 25 minutes.
View 7 Replies
View Related
Oct 10, 2013
We have a table called address and having the address fields and city ,state etc. The table will store huge amount of data .We need to query on the table. I would like to know how can we fasten the query and improve the performance of the query by creating index on these columns...Query is given below . note that the nullable columns can have data
SELECT *
FROM address
WHERE address1 = 'a'
[Code]....
View 9 Replies
View Related
Aug 17, 2010
Is there any way to reduce the index creation time. I have one table which has 7700000 records and every day this table get truncate and we create with create table as select statement and then create the 4 indexes and each index took 5 minutes so in totality it took 20 minutes in index creation.
View 2 Replies
View Related
Apr 4, 2011
I am running a fairly busy Oracle 10gR2 DB, one of the tables has about 120 columns and this table receives on average 1500 insertions per second. The table is partitioned and the partitioning is based on the most important of the two timestamp columns. There are two timestamps, they hold different times.
Out of these 120 columns, about 15 need to be indexed. Out of the 15 two of them are timestamp, at least one of these two timestamp columns is always in the where clause the queries.
Now the challenge is, the queries we run can have any combination of the 13 other columns + one timestamp. In reality the queries never have more than 7 or 8 columns in the where clause but even if we had only 4 columns in the where clause we would still have the same problem.
So if I create one concatenated index for all these columns it will not be very efficient because after the 4th or 5th column the sorting would no longer be very useful and I believe the optimiser would simply not use the rest of the index. So queries that use the leading columns of the index in sequence work well, but if I need to query the 10th column the I have performance issues.
Now, if I create multiple single column indexes oracle will have to work a lot harder to maintain all these indexes and it will create performance issues (I have tried that). Besides, if I have multiple single column indexes the optimiser will do nested loops twice or three times and will hit only the first few columns of the where clause so I think it will kind of be the same as the long concatenated index.
What I am trying to do is exactly what the Bitmap index would do, it would be very good if I could use the AND condition that a Bitmap index uses. This way I could have N number of single column indexes which the optimiser could pick from and serve the query with exactly the ones it needs. But unfortunately using the Bitmap index here is not an option given the large amount of inserts that I get on this table.
I have been looking for alternatives, I have considered creating multiple shorter concatenated indexes but this still would not address the issue since many queries would still not be served properly and therefore would take a very long time to complete.
What I had in mind would be some sort of multidimensional index, I am not even sure if such thing exists. But essentially it would be some sort of index that could serve a query efficiently regardless of the fact that the where clause has the 1st, 3rd and last columns of the index.
So considering how widely used Oracle is and how many super large databases there are out there, this problem must be common.
View 12 Replies
View Related
Mar 5, 2012
I have two tables like below-
CREATE TABLE prod_vendor_record (
vendor_record_seq_no NUMBER NOT NULL,
study_seq_no NUMBER NOT NULL,
vendor_subject_seq_no NUMBER NULL,
control_dataset_seq_no NUMBER NOT NULL,
checksum NUMBER NOT NULL,
processing_flag VARCHAR2(1) NULL,
[code]....
and executing below query on those tables-
insert into prod_temp_vendor(vendor_record_seq_no,checksum,rownumber,transaction_type,iu_flag)
select vr.vendor_record_seq_no, tvr.checksum, tvr.rownumber, tvr.transaction_type, 'U' from
prod_vendor_record vr, prod_temp_vendor_record_20000 tvr
where vr.study_seq_no=25707
and vr.control_dataset_seq_no=3910
and vr.key_hash=tvr.key_hash
and dbms_lob.compare(vr.key_col_val, tvr.key_col_val) = 0
and tvr.error_flag is null;
let me know on which columns of PROD_VENDOR_RECORD table to apply index to make processing faster. As I tried to build index like below-
CREATE INDEX idx_prod_vendor_record
ON prod_vendor_record (
study_seq_no,
control_dataset_seq_no,
key_hash
)
/
But it is not being used by above query (see execution plan)
--------------------------------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | TQ |IN-OUT| PQ Distrib |
--------------------------------------------------------------------------------------------------------------------------------------
| 0 | INSERT STATEMENT | | | | 5168 (100)| | | | |
| 1 | PX COORDINATOR | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10002 | 212 | 445K| 5168 (1)| 00:01:03 | Q1,02 | P->S | QC (RAND) |
[code]....
View 15 Replies
View Related
Dec 14, 2010
I have been reading Oracle documentaion about access paths, got strucked at the concept 'Leading columns in index'. what is meant by 'Leading columns of an index', how to find/judge them that they are leading columns.
The url where I am reading is[URL]...
View 4 Replies
View Related
Dec 2, 2010
I have a table "NEWS_COMMENT" like this:
Name Type
------- --------------
ID NUMBER(8)
USERID NUMBER(8)
SORT_TEXT VARCHAR2(100)
TEXT VARCHAR2(1000)
DATE DATE
VALID VARCHAR2(1)
CODNEW NUMBER(10)
The table has a normal index for the userid column.
There is a query that looks for the differents CODNEW for a USERID but allways the CODNEW has to be greater than 2248833
select codnew from news-comment where userid=2914655 and valid='N' and codnew>2248833
I have created a new index for this kind of querys
create index coment_new_IDX on news_comment
(CASE WHEN codnew >2248833 and valid='N' THEN userid ELSE NULL END )
but oracle doesn't use it. I have used a hint to force it but doesn't run.
View 9 Replies
View Related
Apr 7, 2011
Here, let me explain:
I have create a table with 8 million records and 2 different indexes using 2 different columns (columns name NUM1 & NUM2) on that table. First indexed column (NUM1) values have many different values (1,2,3... etc).
Second indexed column (NUM2) values have only 2 different values.
7999999 records values is same("A") and remaining one record values is different("B").
Query1:
select * from tbl where num1=val
Query2:
select * from tbl where num2='B'
I have compare explain plan both queries, but Query2 doesn't use predefined index. Why Oracle don't use my redefined index at column NUM2?
View 5 Replies
View Related
Dec 30, 2010
We have large tables 60-70 GB having 120 million records. We have to perform index rebuild frequently which takes significant time to complete and effects database performance too. how we can use index Coalesce? what are its benefits, coalesce results in performance gain?
View 10 Replies
View Related
Mar 31, 2011
I have a SQL query where I am making UNION of two select statements. The table that I am joining in each select statement have indexes defined for those tables.
Now the UNION of the two select statements again in enclosed in an inline view , from which I fetching my final field values.
The select statements inside the inline view returns huge number of row (like 50 million rows).
The whole query fails with time out.
Is there a way to pass Oracle Hints so that Oracle uses indexes?
View 1 Replies
View Related
Jun 28, 2011
I have a huge table (about 60 gb) partition over range. The index on this table is global index created on 4 columns together. I have a query which is running very slowly. The explain plan is showing the use of this global index.Explain plan is not showing pstart and pend because the index is global.
View 6 Replies
View Related
Nov 19, 2010
I have a query which had a join:
a.c1=b.c1 and a.c2=@var
where @var is user supplied input at runtime...We had a index on a.c2 . The CBO would use this index to generate an opitimised query plan.We found some records from table "b" were dropping due to inner join. So we made a change in join. It'd be like
a.c1(+)=b.c1 and nvl(a.c2,@var)=@var
This query is no longer using the index, instead its doing a full table scan causing the query to slowdown.I have tried creating index on nvl(a.c2,'31-dec-9999')
But the CBO won't use it.Anyway to create index on this col so that full table scan can be avoided?
View 2 Replies
View Related
Aug 9, 2013
How to force an index if the table not using the index?
View 10 Replies
View Related
Sep 30, 2010
How the length of column width effects index performance?
For example if i had IOT table emp_iot with columns:
(id number,
job varchar2(20),
time date,
plan number)
Table key consist of(id, job, time)
Column JOB has fixed list of distinct values ('ANALYST', 'NIGHT_WORKED', etc...).
What performance increase i could expect if in column "job" i would store not names but concrete numbers identifying job names.
For e.g. i would store "1" instead 'ANALYST' and "2" instead 'NIGHT_WORKED'.
View 24 Replies
View Related
Jun 6, 2013
We have a DELETE statement when coming from application is not using index but when run from Toad or SQLplus as same user uses index. Explain plan also shows using index.I did a query on v$sql below is the output of the query( I have attached the same as a txt file). All the stats are up to date and confirmed from the developer the variable B1 is using the same datatype as column MAXMKY.
SQL_TEXTSQL_ID DISK_READSOPTIMIZER_HASH_VALUE
DELETE LOTA WHERE MAXMKY=:B1 2g2prrp3z56ah19,099,1891,846,735,884
DELETE LOTA WHERE MAXMKY=:B1 2g2prrp3z56ah0 1,846,735,884
OPTIMIZER_COST HASH_VALUEPLAN_HASH_VALUE MODULEPARSING_SCHEMA_NAME
[code].....
View 9 Replies
View Related
Nov 6, 2010
I am working on a query for a feedback response system which is going to be targeted at the common case when the user only want the most recent 10-20 rows in the feedback table. My though is to create an index on the date column, do a sort in an inner query and rownum <= in an outer query. This works as I expect when I am only querying the main table (lookup by index with a stop key), but when I start joining the main table to attribute tables I end up with a full table scan of the main table with the stop key applied after all the joins are completed, the index is nowhere to be found.
CREATE TABLE attr1_tbl(attr1_id NUMBER NOT NULL, attr1 VARCHAR2(10) NOT NULL,
CONSTRAINT attr1_pk PRIMARY KEY (attr1_id));
CREATE TABLE attr2_tbl(attr2_id NUMBER NOT NULL, attr2 VARCHAR2(10) NOT NULL,
CONSTRAINT attr2_pk PRIMARY KEY (attr2_id));
CREATE TABLE attr3_tbl(attr3_id NUMBER NOT NULL, attr3 VARCHAR2(10) NOT NULL,
CONSTRAINT attr3_pk PRIMARY KEY (attr3_id));
[code]....
One thing I noticed was that when no data is selected from the attribute tables, even if they are joined in the query, the CBO throws them out of the plan and only accesses the main table. With the foreign keys this makes sense and really just disqualified my first thought that maybe I was missing a foreign key or not null constraint somewhere.
I also added the cardinality hint to overcome the chance that in my test case there was so little data that index access is not worth it.
View 15 Replies
View Related
Mar 30, 2013
I am going through this scenario:
* 35 | ID TABLE ACCESS BY INDEX ROW | S_ORG_EXT | 3064K| 2472M| | 1 (0)| 00:00:01 |
| 36 | INDEX FULL SCAN | S_ORG_EXT_U1 | 14 | | | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
---------------------------------------------------
35 - filter("T2"."ACCNT_FLG"<>'N' AND ("T2"."INT_ORG_FLG"<>'Y' OR "T2"."PRTNR_FLG"<>'N'))
This unselective index scan on step 36 of the explain is returning 14 rows but optimizer is selecting 3064 K rows from the table .
I tried creating combined index on all 3 columns mentioned in the predicates for 35th step , but that is not utilized .
how to index this whole expression ::--
(ACCNT_FLG<>'N' AND (INT_ORG_FLG<>'Y' OR PRTNR_FLG<>'N'))
Something like CREATE INDEX XYZ on table((ACCNT_FLG<>'N' AND (INT_ORG_FLG<>'Y' OR PRTNR_FLG<>'N')) compute statistics ;
View 3 Replies
View Related
Jan 18, 2012
I have the following problem. When I used in the IN-Statement fixed values e.q. 197321,197322,197323 ..., the index i_tab2_index works fine (index range scan).
But when I used in the IN-Statement an Sub-Select, the index i_tab2_index doesn't work (fast full scan)!My scale indices and used Selects:
CREATE INDEX i_tab1_index ON tab1 ( datum, flag_inst );
CREATE INDEX i_tab2_index ON tab2 ( tab2Idx, kontro );
SELECT count(epidx) as rowAnz
FROM tab2
WHERE tab2Idx IN ( SELECT tab1IDX FROM tab1
WHERE datum BETWEEN '20120117' AND '20120117'
AND flag_inst = '1' )
AND kontro = '9876521'
[code]...
View 12 Replies
View Related
Aug 26, 2010
get all the unused index in the system , if i put this query in batch job and execute it every night upto one months and store its data in a table and after one months i can get all the used indexes and left would be our unused indexes.
select
distinct p.object_name c1
from
dba_hist_sql_plan p,
dba_hist_sqlstat s
[Code]....
View 23 Replies
View Related
Oct 17, 2012
I have a table whose size is 2.3 GB and there are two indexes on it. One index is based on a Date column whose size is 900 MB, and the Other index consists of 5 columns including the date column, and the size is almost 2GB. But when i query the table using the Date column, it is doing a range scan on the second index which is almost the same size as the table. why is it not using the first index? What steps should i take so that it uses the First index without passing hints.
View 4 Replies
View Related
Jan 10, 2011
What is the difference between index rebuild and index rebuild online.
View 3 Replies
View Related
Jul 6, 2010
I have a table which if approc 5GB in size.I am trying to create a partition table from it. I created the new table,but when i am creating local indexes, i am getting an error when i create a unique key. I ll post the creation scripts:
CREATE TABLE A_PT_ORDREG
(
BUS_UNIT VARCHAR2(5) NOT NULL,
ORDER_NO VARCHAR2(15) NOT NULL,
PT_CODE VARCHAR2(15) NOT NULL,
REG_NO VARCHAR2(15) NOT NULL,
AS_APPLICATION VARCHAR2(5) NOT NULL,
[code].....
THE INDEX:
CREATE UNIQUE INDEX PK_A_PT_ORDREG ON A_PT_ORDREG (BUS_UNIT, ORDER_NO, SEQ_NO) local;
I am getting the following error:
ORA-14039: partitioning columns must form a subset of key columns of a UNIQUE index
View 4 Replies
View Related
Apr 6, 2011
mbr has 60,000 rows and member has 60,000 rows approx. two tables have indexes on ssn, and citi_no on them.
PK of mbr : mbr_id
PK of member : mbr_id
other columns are not PK, and have no index on it.
I'm wondering why the statment doesn't use index while ssn and citi_no have index.
MERGE INTO mbr t
USING (SELECT mbr_id,citi_no
FROM member) a
ON (t.ssn = a.citi_no)
WHEN MATCHED THEN
UPDATE SET t.asis_mbr_id = a.mbr_id
where t.ssn not in(select ssn from mbr group by ssn having count(*) > 1)
View 19 Replies
View Related
Jul 22, 2010
I have to create indexes on foreign key columns ,now if composite index is already there with foreign key column then that will work or i will have to create a single column index.
View 17 Replies
View Related
Dec 15, 2010
I am just curious to know what is clustering factor in index and How is it impartant in a sql tuning perspective ?
View 3 Replies
View Related
Oct 3, 2011
i am trying to find the index want to rebuild or not for that i have analyzed that index after that i don't know how to calculate the ration could any one steps to do calculate the following ratio
Run the ANALYZE INDEX command on the index to validate its structure and then calculate the ratio of LF_BLK_LEN/LF_BLK_LEN+BR_BLK_LEN and if it isn?t near 1.0 (i.e. greater than 0.7 or so) then the index should be rebuilt. Or if the ratio BR_BLK_LEN/ LF_BLK_LEN+BR_BLK_LEN is nearing 0.3.
View 2 Replies
View Related
Mar 14, 2012
For a hash join statement, is it beneficial to have the join condition objects in the index as well as the objects in the where clause?
View 19 Replies
View Related
Aug 5, 2010
I have the following query:
Select
tag0.TAG_VALUE pid, tag1.TAG_VALUE, tag2.TAG_VALUE From TAGGER.TAGGABLE_RESOURCE r
, TAGGER.TAG tag0
, TAGGER.TAG tag1
, TAGGER.TAG tag2
where 1=1
[code]....
This runs in about 400ms. Now I replace this:
ANDtag0.TAG_TYPE in (4602, 5228)
ANDtag1.TAG_TYPE in (4612, 5225)
ANDtag2.TAG_TYPE in (4613, 5226)
with this:
ANDtag0.TAG_TYPE in (select COLUMN_VALUE from ( select * from table( TAGGER.GET_IDS_OF_SIMILAR_TAG_TYPES('Patient ID') ) x1 ))
ANDtag1.TAG_TYPE in (select COLUMN_VALUE from ( select * from table( TAGGER.GET_IDS_OF_SIMILAR_TAG_TYPES('Patients Sex') )x2 ))
ANDtag2.TAG_TYPE in (select COLUMN_VALUE from ( select * from table( TAGGER.GET_IDS_OF_SIMILAR_TAG_TYPES('Patients Birth Date') ) x3 ))
So instead of hard coding the IDs there is a function that looks them up. The function itself is reporting that it runs in 0ms. But when I run the new query:
Select
tag0.TAG_VALUE pid, tag1.TAG_VALUE, tag2.TAG_VALUE From TAGGER.TAGGABLE_RESOURCE r
, TAGGER.TAG tag0
, TAGGER.TAG tag1
, TAGGER.TAG tag2
where 1=1
[code]....
it takes around 6s to run. I have looked at the explain plans it it seems as though the function based approach is triggering a full table scan of 'TAG'.
I have tried it with query hints to use index, but it doesn't change the execution plan, or the query time.
The explain plan for the quick query is:
PLAN_TABLE_OUTPUT
---------------------------------------------------------------------------------------------------
Plan hash value: 1031492929
---------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
[code]....
And the slow one is:
PLAN_TABLE_OUTPUT
----------------------------------------------------------------------------------------------------
Plan hash value: 2741657371
----------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes |Te
----------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 20M| 1602M|
[code]....
View 5 Replies
View Related
Dec 6, 2011
I have column containing three values:-N,E,Y.I want to get results with only E and Y values.Is it it possible to create index which would not look for N values.
View 13 Replies
View Related
