Performance Tuning :: Audit Analyze Table On 9i Database?
Apr 19, 2011
I support to get a handle on statistics collectionn in their data warehouses. It seems developers have created several ANALYZE TABLE jobs but the code for these is not stored as PLSQL in the database and thus it is problematic for statistics collection. Even if we collect stats that way we want, these jobs kick in and overlay the statistics we collect every day.
Is there a way to AUDIT ANALYZE TABLE? I can't find it anywhere.
Is there a way to globally turn of ANALYZE TABLE in a 9i database?
View 2 Replies
ADVERTISEMENT
Jul 13, 2010
I have a procedure which mainly run queries on a Table which has nearly 9.5 million recodes. This procedures takes nearly 15 min to complete execution on our main database. I exported and imported the schema to our backup database and the same procedure just took 3 seconds to complete.
I tried to analyze the table in our main database and tried to execute the procedure again but did not show any improvements. ANALYZE TABLE DN_ACTIONS COMPUTE STATISTICS;
I am not sure computing the statistics for all the tables in the schema will work. I also checked there is enough disk space where oracle data files are stored. I am also turning on the sql trace to see what sql statements in the procedure is taking longer time.
View 8 Replies
View Related
Sep 11, 2012
I load a table through sql loader which takes nearly 14 min for 8-9 millions records, once the records complete i run the analyze table compute statics to gather stats and it takes nearly 15 min. is there any ways so that i can reduce the stats timing. the stats collection command runs from other schema not from where the table is residing.
View 1 Replies
View Related
Jul 31, 2013
I have a Datamart DB which has a continuously increasing volume. I run a daily optimize job, to have the data analysed using the below:-
EXECUTE dbms_stats.gather_schema_stats(ownname=> 'xxx' ,estimate_percent=> 25 , DEGREE => 4, cascade=> TRUE );
analyze table xxx.abc compute statistics; But this optimization itself is taking nearly 4 hrs to complete and I can't afford to have the delay.
Is there a better way of running this optimization?
View 9 Replies
View Related
Jun 24, 2013
We are using 11.2.0.3.0 on solaris 10 facing slow performance, following are the Wait Events in AWR report, Also if any specific document to analyze AWR report and to pin point the performance bottleneck.
Foreground Wait Events
**********************
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
-------------------------- ------------ ----- ---------- ------- -------- ------
direct path read 308,729 0 21,191 69 58.0 39.5
db file sequential read 208,754 0 3,742 18 39.2 7.0
cursor: pin S 19,541,899 0 2,561 0 3,668.5 4.8
[code]....
View 2 Replies
View Related
Sep 6, 2010
I used v$locked_object and v$lock query to get the output.. But still I'm an one year exp in ORACLE. How to analyze the output of lock queries. what are the parameters to be analyzed on AWR report.
How to do proper performance checkup in ORACLE database as well analyze it.
View 4 Replies
View Related
Dec 13, 2011
By default the DBMS_STATS package runs once every 24 hours to collect statistics for database objects and Oracle collects new statistics when enough of the data (about 10%) has changed.
My question here is how to check the table has changed 10% in database?
View 23 Replies
View Related
Jul 12, 2010
Looking to understand the difference between instance tuning and database tuning.
What is the difference between these two tuning exercises? I understand that an instance is memory based structures (logical) where as database consists of physical structures.
However, how does one tune a database the physical structure? Does it have to do with file placements/block sizes etc. Would you agree that a lot of that is taken care by ASM now in 11g? What tools are required/available (third party as well as oracle supplied) for these types of tuning scenarios?
View 1 Replies
View Related
Oct 20, 2010
There is a simple way to increase the performance of a query by reducing the row-size of the table it hits. I used it in the past by dividing the table into smaller parts and querying respective smaller table in each query.
what is this method called ? just forgot the method and can't recall it. what this type of row-reduction optimization is called ?
View 6 Replies
View Related
Oct 31, 2011
I have two tables with 113M records in DWH_BILL_DET & 103M in prd_rerate_chg_que and Im running following merge query, which is running for 13 hrs to update records, which is quiet longer time.
SQL> explain plan for MERGE /*+ parallel (rq, 16) */
INTO DWH_BILL_DET rq
USING (SELECT rated_que_rowid,
detail_rerate_flag_code,
rerate_sel_key,
[code].....
View 39 Replies
View Related
Nov 15, 2010
Testing our 9i to 11g upgrade, we've imported the entire DB into the new machine.We've found that certain procedures are really suffering performance problems. BUT, we've also found, that if we check out a production copy of the procedure from our source code control, and reinstall it, the performance issue goes away. Just alter the procedure and recompiling does NOT work.
The new machine where the 11g database exists is slightly different than the source, but it's not like we have this problem with every procedure. It's only a couple.
any possible reason that we'd have to re-install a procedure to correct a performance problem?
View 13 Replies
View Related
Jul 16, 2013
An SQL query is taking a lot of time than usual and not completing even left after hours! The query joins a table with a quite complex view.
The same query in a test database completes in less than 2 mins.
I would like to export the sql plan from test database to prod database.
how to export/import in 10.2.0.4 version for a particular sql statement's execution plan.
View 2 Replies
View Related
Jan 24, 2013
we about analyse tables in oracle.
1) why required table analyze.
2) how to do table analyze.
3) and after analyze what taking steps.
View 12 Replies
View Related
May 22, 2012
Currently we are deleting the partition daily. Table structure is Interval partitioning. After deleting partition how to analyze the partition table.
View 12 Replies
View Related
Oct 10, 2012
insight into the overheads for mutally authenticated SSL for database connections? This is over a fast local network, to a RAC cluster, with DB firewall in front. There's always a large element of "it depends"
Information I'm interested in are things like latency for initial session setup and subsequent data transfer. Also the increase in network packet size, and the increase in CPU cost for the database server. I guess there is some implications for session memory usage as well.
View 4 Replies
View Related
Jul 4, 2012
I have one big database which I need to migrate to Oracle, because it rocks with big databases, instead of other databases and when I was made transfer software and all works great except one more think. During this process I found that Oracle normally fill log & undo table, and my question is how to migrate (or can I migrate) database to oracle without filling undo database (deactivate this process) and after that to put database to work normally, because I just need to transfer data as is and from that point Oracle goes on...
View 4 Replies
View Related
Sep 1, 2013
i am using 11.2.0.3 version of oracle. We have recently migrated to 11g, after 1 month of smooth and comparatively better performance, we are suddenly facing performance issues with our database and it got crashed twice within 5 days. even we didnt push any new code to our database in recent past, atleast after the 11G migration. And after getting feedback from the ORACLE corporation guys , they pointed out about the default database stats gathering job, which was eating most of the CPU, because of the default degree mentioned So it was running in 160 parallel threads causing resource starvation.so we reduce the degree of the stats gathering job to 8 .
But the database crashed again two days back, and rebooted within 3 mins to back to normal, even after this default degree changed to 8. This is happening due to any specific application related sql or anything else.
View 9 Replies
View Related
Oct 14, 2010
I am doing import and export of database.Before loading data i drop all the tables and import.Is there any issue if we do drop tables and import data frequently.
View 2 Replies
View Related
Jul 9, 2012
I understand that when data is read from the disk, I/O is done..And When computations are done then CPU is used..Then where the following equation fits?
DB Time = sum of database CPU time + waits
Is I/O considered as a part of CPU time?
Does this equation changes with SAN, OS caching?
View 3 Replies
View Related
Mar 23, 2012
we are using oracle 9i on AIX Server. When Customer were accessing the database, accidentally power was shut down. we restarted the Server,and Oracle database. all resumed successfully.
However while doing "Payments by the customer" it takes a lot of time to insert even a single payment record on database.The database is Live and our customer are very much frustrated,
View 1 Replies
View Related
Feb 6, 2011
I am trying to update columns of Table A with the columns of Table B. Both these tables have 60,000 rows each. I tried this operation using following 2 queries:
Query 1
Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)
Query 2
Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)
where exists
A.code = (select B.code
from TableB B
where A.code=B.code)
When i execute these two above queries, it keeps executing indefinitely.
View 4 Replies
View Related
Jun 24, 2011
Below query is taking a long time...
select gam.SOL_ID,COUNT(gam.FORACID) from gam,smt where
gam.ACID=smt.ACID and gam.ACID NOT IN(select ACID from imt) and
gam.SCHM_TYPE in('SBA','CCA','CAA','ODA') and GAM.ACCT_CLS_FLG='N' and
gam.SOL_ID IN(select SOL_ID from IMT) group by gam.SOL_ID
/
attached is the explain plan.
in which index on IMT table is not used. And the query is doing a FTS on IMT table. What needs to be done to avoid FTS on IMT table.
View 10 Replies
View Related
Jun 28, 2010
What are the factors that decide on which column we should partition the table and which partition method we should chose.
View 2 Replies
View Related
Aug 23, 2012
SQL> show parameter sga
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 1152M
sga_target big integer 0
[code]....
in scenario above, the database do not using ASMM, and spfile If I wan to increase db_cache_size parameter, do i need to rebounce instance?
View 6 Replies
View Related
Aug 17, 2012
I am facing a weird situation wherein the explain plan of same sql in SIT and PROD is different.In fact the explain plan is very costly in Prod.Also the DB version of both SIT and PROD is same.
Below is the sql and corresponding explain plan in Prod and SIT respectively.
Query:
SELECT seq,CCN,ProcessorPart,root_item,comp_path,Item,comp_item,comp_item_type,
lag(comp_item_type,1,'PART') over(PARTITION BY seq ORDER BY lvl)Nxt_comp_item_type,lvl,bom_qty,
ROUND(CASE min(abs(bom_qty)) OVER (PARTITION BY seq ORDER BY lvl)
WHEN 0 THEN 0 ELSE 1 END * EXP (SUM (LN (nullif(abs(bom_qty),0))) OVER (PARTITION BY seq ORDER BY lvl))) Ulti_qty,
'AMER'
[code]...
The tables referred in above query is small tables containing arnd 10k records.The above tables are partitioned on Region and not indexed.
Explain Plan in Prod: COST CARDINALITY BYTES
SELECT STATEMENT, GOAL = ALL_ROWS165173613539322883634804
SORT UNIQUE236360
UNION-ALL
PARTITION LIST SINGLE117240
[code]...
Explain Plan in SIT: COST CARDINALITY BYTES
SELECT STATEMENT, GOAL = ALL_ROWS3211689
SORT UNIQUE347240
UNION-ALL
PARTITION LIST SINGLE172120
[code]...
I am not able to attribute why there is a huge change in Cost between SIT and Prod.Apparently the Job is going for 3-5 hours which used to get completed within 20mins in SIT.
View 5 Replies
View Related
Feb 6, 2012
We have database with multiple fields containing NULL values and in many queries we have NVL function which in turn is suppressing the index usage when in fact it is really essential (selectying very few rows from massive data) instead of creating lot of Function based indexes (NVL) or composite indexes with (nullable_column, constant) I am thinking of settting a default value for most of the fields In that regard I have some queries :
Which approach is better - setting default value for the fields or updating the fields with default value and modyfing inserts to take care of future data? Though altering table and modifing column to set default value looks better considering it will take care of data inserted in the future, it will invalidate the subroutines.I understand in 10g both statement will generate lot of undo (though in 11g, I heard things changed for setting default value of a column) How to take care of all the queries which are using the criteria 'where column1 IS NULL' or 'where column1 IS NOT NULL'. It will be really difficult task to manually change each and every occurrence of such condition even using user_source.
Finally for numeric values say for ID field which starts from 1 onwards 2,3,4 etc, we can set 0 as sensible default so that the performance is not affected.
Is there such precaution for varchar2 field purely from performance point of view?
View 3 Replies
View Related
Nov 18, 2012
I have a question regarding memory parameters in oracle database 9.2.0.8, especially sga_max_size and db_cache_size. Database server has 32G of ram. Oracle parameter on server shmmax is set to 16G. Is reasonable to set sga_max_size to the same value, and db_cache_size to 80% of that size?
View 2 Replies
View Related
Dec 3, 2010
which tools are available for monitoring load of the database?
View 4 Replies
View Related
Apr 11, 2012
As there was a database performance, we started to analyse the issue by running ADDM using below.
@?/rdbms/admin/addmrpt.sql.
The result of running ADD is below.
DETAILED ADDM REPORT FOR TASK 'TASK_64718' WITH ID 64718
Analysis Period: 10-APR-2012 from 06:00:15 to 07:00:22
Database ID/Instance: 324353546/1
Database/Instance Names: JACK/jack1
Host Name: fdsfggwe001
[code].....
There was no significant database activity to run the ADDM.The database's maintenance windows were active during 100% of the analysis period.The analysis of I/O performance is based on the default assumption that the average read time for one database block is 10000 micro-seconds. An explanation of the terminology used in this report is available when you run the report with the 'ALL' level of detail.
Current parameters set in database are below
statistics_level ---- string
timed_statistics --- boolean
1.Do i need to set the initialization parameter to some other value?
2.should i run the below command before executing the ADD report ? exec dbms_workload_repository.create_snapshot();
View 10 Replies
View Related
Oct 14, 2013
A website requires to display consolidated data from databases located in different geographical regions (India, London and New York). The application server for the website is hosted only in one location India. What are the techniques that can be used for faster retrieval of data from all 3 databases?
Note: There is no need of real time data retrieval from different regions; however the user should able to view the updated data at predefined intervals.
View 9 Replies
View Related
