we are ruining oracle 9i in windows 2000 server, oracle is the only database running in the server. The RAM capacity is 4GB but the sga showing is as below
Total System Global Area 118255568 bytes
Fixed Size 282576 bytes
Variable Size 83886080 bytes
Database Buffers 33554432 bytes
Redo Buffers 532480 bytes
pga size
NAME VALUE
---------------------------------------------------------------- ----------
aggregate PGA auto target 0
global memory bound 0
total expected memory 0
total PGA inuse 19937280
[code]...
how can we using the 4gb RAM deducing 20% for OS Sometimes users are complaining slow process.
I am getting back into Oracle (from a long haul in MS only env.) and am now testing Oracle installs.I have been given a task of seeing the diff. between 12c and 10.2g...I set up 2 vms (excatly same configs) and used the same dmp file (on both env.) to restore data and settings for our jobs to run.We have some aggregated data, and cubes with DIM tables each being run on the vm machines. We run nightly jobs to rebuild our cubes.
I am supposed to see/analyze the value of 12c, and understand things might vary from company to company, but am perplexed at my result.12c is half the speed of 10.2g, both env. are the same out of the box with same dmp file and same hardware.
I am using the same dmp file, with the same jobs on each machine, with both vms having 10.2g or 12c installed out of the box as is.what default oracle settings might have changed from 10.2g to 12c that could make the exact same env. run twice as slow on the 12c?
Expectations were that out of the box with both machines running same jobs on same data (from dmp files) would have it that 10.2g would be slower than the 12c, except the 12c takes 2 times as long to run the jobs. I have reviewed every possibility as I know usually the problem is the person sitting in the chair and not the pc...but I confirmed all was identical from the one vm env. to the other, except the version of oracle out of the box.
What could be done to bring that default setting back to atleast equal time between the 2, that would give me a great starting point. Otherwise, I would have to toss this up to bloatware.
I read up a bit on the CBO, and know this might have changed in 12c.is there a way to bring it back to a backwards ealier config, so as to atleast match both env. execution plans?
I have few queries on PGA memory management.Since these queries are based on 2-3 examples not exactly same by nature I am summarising it after my understanding for the same
As I understand many workareas can be allocated to a single sql statement and number and sizes of theses workareas is controlled internally by Oracle when Automatic Memory management (PGA_aggregate_target and workarea_size_policy=Auto are set) Since many sessions share the PGA memory, the amount of memory available to each session may vary and if less amount of memory is available for a session for sorting then TEMP tablespace is used
[1] Can we say paging happens and can be checked at this time?
[2] Is there a difference in handling memory while populating pl/sql tables?
As I have encountered ora-04030 while some our developers were populating pl/sql tables but never encountered this error for sorting, hash joins etc Though I don't remember the width of pl/sql table, I am sure the developer used 'LIMIT' clause during bulk collect and still faced the issue.
With a single session on the server, I noticed that the difference in values displayed issuing 'free' command in linux and output values from sesstat did not match at all while there wasn't any heavy OS process involved during the period. I was expecting 'used' and 'free' values displayed by free command (linux) will change and difference would be approximately equals 'before and after values of session pga memory.
[3] Isn't it expected to match?
[4] Can we say in dedicated server, at any moment of time, the SUM of 'session pga memory' represents all the memory used by Oracle SGA, at that point of time?
select sum(value)/1024/1024 "memory in MB" from v$sesstat where statistic#=20;
During one of the tests I got following output (divide value by 10 for my visibility and avoid formatting)
SQL> select a.name, to_char(b.value/10, '999,999,999') value from v$statname a, v$mystat b where a.statistic# = b.statistic# and a.name like '%ga memory%'; 2 3 4
[code]...
The above query is showing above values even when the pl/sql block execution is completed 30 minutes back
[5] Do we call this as 'memory leak' where memory is not released even while some time has passed since session has done something?Of course I am not checking at OS level as mentioned in question [3] above the values won't match!
Still the output of free command for reference(After the pl/sql block executed)
SQL> select * from v$pgastat; NAMEVALUEUNIT aggregate PGA target parameter 524288000bytes aggregate PGA auto target 456256512bytes global memory bound 26214400bytes total PGA inuse 17328128bytes
[code]...
[6] What could be the significance of negative values of 'session pga memory/max'?
Last We have an OLTP system and in the night we run batch processes in 2-4 sessions
Suppose I have 10 GB RAM and with PGA setting of 3.5 GB Now I want the batch process sessions to use max possible memory during nighttime and toggle the setting back in the morning
[7] With above settings (10 GB RAM and 3.5 GB PGA) how can I divide the memory among 4 sessions?
Shall I set 1) PGA_aggregate_target=0 2)Workarea_size_policy=manual 3) Sort_are_size 4) Hash_area_size
[8] What would be approx values for parameter 3 and 4? will it be straight 3.5 GB/ 4?
7 rows selected.However, the SGA_MAX_SIZE parameter is set to 3G, so when I do:
SQL> ALTER SYSTEM SET sga_target=5376M scope=both; ALTER SYSTEM SET sga_target=5376M scope=both * ERROR at line 1: ORA-02097: parameter cannot be modified because specified value is invalid ORA-00823: Specified value of sga_target greater than sga_max_size
My database used spfile. I know that the procedure to change this is the following: Create pfile from spfile, shutdown immediate, change value in pfile, startup with pfile..However, the pfile does not have any parameter called max_sga_size. It only has the following:
In my below query example , i have to pass more than 4000-5000 paramter in "a1.num" in below query. what is the best way to handle this, also if I pass more than 2000 paramter , the query takes a long time to execute. How can we solve the performance issue as well how I can pass more parameter.
Looking to understand the difference between instance tuning and database tuning.
What is the difference between these two tuning exercises? I understand that an instance is memory based structures (logical) where as database consists of physical structures.
However, how does one tune a database the physical structure? Does it have to do with file placements/block sizes etc. Would you agree that a lot of that is taken care by ASM now in 11g? What tools are required/available (third party as well as oracle supplied) for these types of tuning scenarios?
I have two tables with 113M records in DWH_BILL_DET & 103M in prd_rerate_chg_que and Im running following merge query, which is running for 13 hrs to update records, which is quiet longer time.
SQL> explain plan for MERGE /*+ parallel (rq, 16) */ INTO DWH_BILL_DET rq USING (SELECT rated_que_rowid, detail_rerate_flag_code, rerate_sel_key,
How the length of column width effects index performance?
For example if i had IOT table emp_iot with columns: (id number, job varchar2(20), time date, plan number)
Table key consist of(id, job, time)
Column JOB has fixed list of distinct values ('ANALYST', 'NIGHT_WORKED', etc...).
What performance increase i could expect if in column "job" i would store not names but concrete numbers identifying job names. For e.g. i would store "1" instead 'ANALYST' and "2" instead 'NIGHT_WORKED'.
I have a question about database fragmentation.I know that fragmentation can reduce performance in query times. The blocks are distributed in many extents and scans process takes a long time. Oracle engine have to locate the address of the next extent..
I want to know if there is any system view in which you can check if your table or index has high fragmentation. If it's needed I will have to re-create, move or rebulid the table or index, but before I want to know if the degree of fragmentation is high.
Any useful script or query to do this, any interesting oracle system view?
There is a simple way to increase the performance of a query by reducing the row-size of the table it hits. I used it in the past by dividing the table into smaller parts and querying respective smaller table in each query.
what is this method called ? just forgot the method and can't recall it. what this type of row-reduction optimization is called ?
How many records could I have in a single table without performance degradation with Standard Edition without partitioning with cutting-edge server (8 or 12 cores, 72 GB RAM, FC 4 Gbit, etc...) and good storage?
300 Millions in only one table with 500K transactions / day is too much?
Testing our 9i to 11g upgrade, we've imported the entire DB into the new machine.We've found that certain procedures are really suffering performance problems. BUT, we've also found, that if we check out a production copy of the procedure from our source code control, and reinstall it, the performance issue goes away. Just alter the procedure and recompiling does NOT work.
The new machine where the 11g database exists is slightly different than the source, but it's not like we have this problem with every procedure. It's only a couple.
any possible reason that we'd have to re-install a procedure to correct a performance problem?
I need to check the package performance and need to improve the package performance.
1. how to check the package performance(each and every statement in the package)? 2. In the package using the delete statement to delete all records and observed that delete is taking long time to delete all the records in the table(Table records 7000000). This table is like staging table.Daily need to clean the data before inserting the data into it. what can I use instead of Delete.
Somewhere I read that we should not use hints in Oracle production environments, but we can use hints in the development environment and on achieving the desired execution plan we can adjust the 'statistics' to follow that plan without hints.
Q1. If it is true what statistics do we adjust for influencing the execution plan and how?
For example, I have the following simple query:
select e.empid, e.ename, d.dname from emp e, dept d where e.deptno=d.deptno;
emp.empid, emp.deptno and dep.deptno columns have indexes and the tables have the standard structure as found in the basic oracle examples.
If I look at the execution plan of the above query then I see that the driving table is empand the driven table is dept.Also the type of join that is taking place is 'Nested Loop'.
Questions: With respect to the above query, Q 2. If I want to make dept the driving table and emp the driven table then how can I adjust the statistics to achieve that? Q 3. If I want to use hash join instead of a nested loop join then then how can I adjust the statistics to achieve that?
I can put the ordered and the use_hash hint to effect this but again I have heard that altering statistics is a more robust way to control an execution plan as compared to hints.
When i exporting an user using expdp utility, the load the on the server is going up-to 5. The size of the database is 180GB. Below is the command that i use for export.
The following query gets input parameter from the Front End application, which User queries to get Reports.There are many drop down boxes like LOB, FAMILY, BRAND etc., The user may or may not select values from drop down boxes.
If the user select any one or more values ( against each drop down box) it has to fetch all matching values from DB. If the user does'nt select any values it has to fetch all the records, in this case application will send a value 'DEFAULT' (which is not a value in DB ) so that the DB will fetch all the records.
For getting this I wrote a query like below using DECODE, which colleague suggested that will hamper performance.From the below query all the variables V_ are defined in procedure which gets the values selected by user as a comma separated string here V_SELLOB and LOB_DESC is column in DB.
DECODE (V_SELLOB, 'DEFAULT', V_SELLOB, LOB_DESC) IN OPEN v_refcursor FOR SELECT /*+ FULL(a) PARALLEL(a, 5) */ * FROM items a WHERE a.sku_status = 'A'
what the principal things to look at when we have for the same query different performance results are?I have 2 different bases: the plan and data are the same but performance results are very differents.
are the most important performance keys we have to calculate or take in account to preserve or to increase the DB performance in terms of response times, and whatsoever according to performance ?
I am working on an assignement where client is using Oracle 10g but stuck to using RBO Now the application team, from the GUI available to them build dynamic queries and some of them run very slow.
Neither the code can not be changed to tune the queries nor do we get the exact step in the plan which is an issue (being RBO).For some long running queries the Tuning advisor is not producing any recommendations.
Another hurdle is that all the application users are using same application user id so we can not write a logon trigger to use CBO for some particular queries to see what is happening in the background!
I want to tuning the next sql sentence. In this sql I want to get the hash_value and sql_text of the sentences that it's causing TX blocks. Is it possible?. This sentence works fine but sometimes It's slow.
SELECT DISTINCT hash_value, sql_text FROM gv$sql sq WHERE hash_value IN (SELECT DISTINCT prev_hash_value FROM gv$session se WHERE sid IN (SELECT sid FROM gv$lock l WHERE type = 'TX' AND ctime >= 2000 AND l.inst_id = se.inst_id AND l.sid = se.sid) AND sq.inst_id = se.inst_id); [code]....
I see one of my SQL's which is ran by the user on a 10.2.0.3 database changing its SQL_ID after some runs even if the query is not changed a bit! However the HASH VALUE for this query remains the same.
how a same query can have different SQL_ID's but same HASH_VALUE?
Note: Statistics are not modified on the base tables of this query.
I am running Oracle 10.2.0.1.0 on MS Windows 2003 server 64-bit with 16G RAM.
Here is the findings for my Oracle database.
SQL> select * * from v$sgainfo; NAME BYTES RES -------------------------------- ---------- --- Fixed SGA Size 1293560 No Redo Buffers 7094272 No Buffer Cache Size 830472192 Yes
[code]...
I find that the SGA component "Buffer Cache" is decreasing from the start "1.8G" and down to now 0.8G. On the other hand, the component "Shared Pool" is increasing from the start 0.3G to now 1.2G. I noticed that there are 100 operations of shrinking of "Buffer cache" and growth of "Shared Pool" in Oracle every day.Is it a indicator that I should raise up the SGA_MAX_SIZE?
I tried to increase the SGA_MAX_SIZE to 4G. But I cannot start the Oracle afterward.Is it a limitation of MS Windows(OS) or Oracle?I set the SGA_MAX_SIZE to 3G. This time, I can startup Oracle.What is the optimum/maximum I can set to SGA_MAX_SIZE?Is there any adverse effect/concern when setting the SGA_MAX_SIZE more than 2G?
Here i have three tier application. I want to know it host name from sid or sqlid . I want to know which query run on which host. Because i have one user from application to database. So i want to know which query consume more time on which host ?
I want to run some OLTP benchmarks on my system. I have looked up the TPC-E benchmarking suite .. but the documentation on the site makes no sense to me .
I have installed database in one server. I would like to enable AWR into it. Statistics_level is set to Typical. While running the below script to enable the AWR, its gives error -
SQL> exec dbms_scheduler.enable('GATHER_STATS_JOBS'); BEGIN dbms_scheduler.enable('GATHER_STATS_JOBS'); END;
* ERROR at line 1: ORA-27476: "SYS.GATHER_STATS_JOBS" does not exist ORA-06512: at "SYS.DBMS_ISCHED", line 4343 ORA-06512: at "SYS.DBMS_SCHEDULER", line 2802 ORA-06512: at line 1