I have a table called Daily_usage (only 1 day data) which contains daily transaction records. After a day I have to move this data to another table named Daily_30days_usage table. this table contained the 30 days data. After 30 days the 31st day data should be deleted from Daily_30days_usage table.
How can I implement this requirement without INSERT statement?
I need to move data from non-partinioned table to partitioned. The volume is about 60 millions rows. What is the fastest way to do that? I think about pareller insert and nologging. What do you think about this? May data pump be faster?
View 4 Replies View RelatedI have imported data into database using sqlloader into flat table. Now I need to move the data from this table to another table. This is production system and I must keep it online. So I decided to make script that will move data in small chunks and commit frequently to avoid waits and table locks.
Regarding the script I have question. I can to the bulk load of rowids. Is it possible to optimize the insert and delete in similar way instead of doing insert/delete in loop for each rowid ?
declare
type t_rowids is table of rowid;
rowids t_rowids;
begin
loop
select rowid bulk collect into rowids from ims_old.values_f2 where rownum < 1000;
[Code]....
One of our auditing recommendation is to move table AUD$ to a separate tablespace from system. Why this recommendation is important and how to do this action ?
View 2 Replies View RelatedI have looked at the code you pointed me to, and have attempted to get it to work using a package, but I cant even get the package to compile..
CREATE OR REPLACE PACKAGE BODY trigger_api AS
PROCEDURE tab1_row_change (p_numass IN varchar2,
p_datcre IN date) IS
BEGIN
INSERT INTO tempjob (numass, datecre) VALUES (p_numass, p_datcre);
END tab1_row_change;
[code]....
Doing this process from code is not an option and MUST happen automatically via triggers.The mutating trigger error can sometimes be avoided: URL....
I am trying to create a trigger which does the following : A flag in the initial able is set to Y. When this happens, the record needs to be inserted into a history table and then DELETED from the calling table.
It must happen in triggers, but I keep getting the mutating error.I have tried to use a Compound trigger, but with no luck and just dont really understand how to get this to work.
Doing this process from code is not an option and MUST happen automatically via triggers.
I am trying to create a trigger which does the following : A flag in the initial able is set to Y. When this happens, the record needs to be inserted into a history table and then DELETED from the calling table. It must happen in triggers, but I keep getting the mutating error. I have tried to use a Compound trigger, but with no luck and just dont really understand how to get this to work.
Doing this process from code is not an option and MUST happen automatically via triggers.
I have create Master block and a Detail block.When i am clicking on the Master block, then details records are displaying.But when i m moving from 1st record of detail block to 2nd record of master block, then detail block's data is not not displaying.It just firing the validation of detail block's first field.
when from Detail block (Cursor on the field Mapping code field) clicking on the 2nd records i.e Ord.No. =2 , at that time validation is getting fired.)
What i really wants that if click on the 2nd record of Master, automatically records should display in detail block.
I have a requirement to import text files which are generated from 3d modelling software xsteel where it records all geometric information and i want to import this information into oracle table.
CREATE TABLE dstv_head ( wo_no VARCHAR2(12),struct VARCHAR2(12),rev_no NUMBER,
mark VARCHAR2(12),pos VARCHAR2(12),grade VARCHAR2(12),qty NUMBER,PROFILE VARCHAR2(24),TYPE VARCHAR2(12),
len NUMBER,width_web NUMBER,width_bottom NUMBER,flange_thk NUMBER,web_thk NUMBER,radius NUMBER,kgm NUMBER,
kgm1 NUMBER,kgm2 NUMBER,bevel_plus NUMBER,bevel_minus NUMBER,holes_yn VARCHAR2(1),holes_v_yn VARCHAR2(1),
hole_x_dim NUMBER,hole_y_dim NUMBER,hole_dia NUMBER,no_of_holes NUMBER)
-- All the data which has to go under specific field for example **9005.nc1 will go into wo_no field, 1239401A will go under struct.
ST
** 9005.nc1 --WO_NO
1239401A - STRUCT
1 -REV_NO
9005 -MARK
9005 --POS
S275JR --GRADE
2 --QTY
[code]....
There is a requirement to make a table data in a database (eg: HR database) available in another database (eg: EMP database), instead of accessing it using database link. In EMP database(where data needs to be cloned), data will only be queried and no write operation will be done. Data in remote database (eg: HR DATABASE) will be occassionally fully truncated and reinserted. The plan is to do a similar truncate and reinsert of data (from HR database) into EMP database monthly once using dbms scheduler job. So basically data in just one table needs to be cloned in another database.
Question: For this situation, is a regular table or Materialized view the right choice to clone the table in EMP database and why? The table in HR database (remote database) is not very big.
I have a staging table and a target table. How do I pull in last loaded data from staging table to target table?
View 4 Replies View RelatedI have a table with a BLOB column ;
I want read data from table and insert to another table with a cursor
My code is :
procedure read_data is
cursor get_data is
select id,image from picture1;
id1 number;
pic blob;
begin
open get_data;
[code]....
when I run form , error FRM-40734 occurred
error in line " fetch .... "
I have the below data in table test_1.
select * from test_1
IDNameTotal
-----------
1A100
2B100
3C100
4D100
test_2 table contains the concatination of ID's with comma seperated. Actually in this table ID column is of datatype varchar2.
select * from test_2
ID
----
1,2,3
My requirement is to select the data from test_1 table where the id values in this table exists in test_2 table. I tried with the belowselect statement, but could not get any data.
SELECT * FROM test_1 WHERE to_char(id) IN (SELECT id FROM test_2)
create table test_1 (id number, name varchar2(100), total number)
create table test_2(id varchar2(100))
insert into test_1 values (1,'A',100)
insert into test_1 values (2,'B',100)
insert into test_1 values (3,'C',100)
insert into test_1 values (4,'D',100)
I need to insert data in Table A from Table B where most of the fields are identical and might some of the fields will be more in Table A.
ex: Table A: a,b,c,d,e,f
Table B: a.b,c,g,h
How to insert this using user_tab_columns in cursor and if I am giving the i/P as my table names . This needs to be configurable and reusable rather i mention all the fields in my logic.
I am trying to join column names from a table with data from a different table. I think i should be able to pass the parameter to a 'select list' in a query. Look at my sample data below. And the data in sales table can grow till 15 rows and similarly corresponding columns in saleshist.
CREATE TABLE SALESHIST
(
PRODUCT VARCHAR2(30 BYTE),
Q1 VARCHAR2(30),
Q2 VARCHAR2(30),
Q3 VARCHAR2(30),
Q4 VARCHAR2(30)
)
[code]......
In my database I found some anomalies like
SQL> select SEGMENT_NAME, SEGMENT_TYPE, BLOCKS, EXTENTS, BYTES/1024
2 from user_segments
3 where SEGMENT_TYPE='TABLE'
4 ORDER BY SEGMENT_NAMe;
[code]....
The countries table is missing in user_segments data dictionary view.But I can queries the countries using select statement.
SQL> SELECT * FROM COUNTRIES;
CO COUNTRY_NAME REGION_ID
-- ---------------------------------------- ----------
AR Argentina 2
AU Australia 3
BE Belgium 1
BR Brazil 2
[code]...
why the country table is missing in user_segments data dictionary table.
We need to load data from index by table to table.Below code is working fine.
declare
query varchar2(200);
Type l_emp is TABLE OF emp%rowtype INDEX BY Binary_Integer;
rec_1 l_emp;
begin
[Code]....
But data from source table and target table is dynamic.Ex:In above code, emp(source) and target table is emp_b are static. But for our scenario is depends on the source table , target would change as below.If source is emp then target is emp_bIf source is emp1 then target is emp_b1 ............
create or replace procedure p(source in varchar2, target in varchar2)
as
query varchar2(200);
source varchar2(200);
Type l_emp is TABLE OF emp%rowtype INDEX BY Binary_Integer;
rec_1 l_emp;
[Code]....
Its throwing. How to implement this scenario .
In my Production DB. 5 Datafiles created in same tablespace. Datafile size is of 25GB. Data stored in all Datafile. Data is just 5GB in all datafile. I want to move data from 5 datafiles to single or couple of datafiles.
This is in Oracle 11g.
Oracle Data Replication. I am using Oracle 10g release 10.1 and I want to do replication of my data from one machine to another machince.
View 2 Replies View Related"All data you create in this tablespace will be encrypted using an AES256 encryption key. You cannot encrypt an existing tablespace. To encrypt data, first create an encrypted tablespace, then use alter table move, CTAS or datapump import to move your data into the encrypted space. Remember to drop the old tablespace BUT not including datafiles. Use an OS schred program to remove the old datafile. If you are on ASM you may use the including datafiles option since you can’t schred files from the OS inside an ASM instance."
But i want to know why we should NOT drop the including datafiles, when dropping tablespace (so 'drop tablespace my_tbs including contents and datafiles'). So what option should we use when dropping tablespace?
Why we should use OS capabilities to remove the datafiles?
What happens if i remove the datafile when i drop the tablespace?
My form has two list boxes and two buttons add and remove. As and when i click add button, the selected value from left hand side list item should get populated to right hand side list item. And When I click Remove button, it should do vice versa.
View 10 Replies View RelatedAm moving data from 10g enterprise edition to 11g standard edition using normal import commandafter completing i just go through the Log.i found a thing which makes me confusing
in some tables alone a row is not inserted stating the ORA-12899 while checking with the database it shows the column is varchar(100)in the log the error showing it tries to insert 101 character. how it happening to a single row
how can i solve it
I Have two DB s with same tables, I need to insert the data from db1 tables to db2 tables. Primary ID starts from 1 on both the tables.
EXample:
Table1:
ID Name c3 c4 c5
1 Oracle1 x y b
2 Oracle2 x n b
3 Oracle3 x f b
4 Oracle4 x f b
5 Oracle5 x f b
Table2:
ID Name c3 c4 c5
1 ONT1 t y t
2 ONT2 t m h
3 ONT2 t b n
All the table1 data should be moved to table2..... Desired out put should be like following
ID Name c3 c4 c5
1 ONT1 t y t
2 ONT2 t m h
3 ONT2 t b n
4 Oracle1 x y b
5 Oracle2 x n b
6 Oracle3 x f b
7 Oracle4 x f b
8 Oracle5 x f b
Data volume is huge... There are 1500 tables and on an average there 10 Million records per table. Currently I am using DB links
table already exist & its little data too, may have to imp rest of lost data, is this the right command?
imp SYSTEM/password FILE=file.dmp FROMUSER=black TOUSER=blake TABLES=(vcr_mappings, tablename2) ignore=Y CONSTRAINTS=n
scenerio2 (if have to drop & recreate the entire table) is this the right command?
imp SYSTEM/password FILE=file.dmp FROMUSER=black TOUSER=blake TABLES=(vcr_mappings, tablename2) ignore=Y
just for single table imp
how to insert data in a table by deleting previous entered data and only inserting current data like:
CREATE TABLE test
(
name VARCHAR2(20),
id NUMBER
)
INSERT INTO test VALUES ('aaa',5500);
[code]....
I got two rows. now when I do insert statement I want to delete the previously stored data and only insert the current data like:
INSERT INTO test VALUES ('aaa',8);
INSERT INTO test VALUES ('aaa',9);
it must show aaa,8 and aaa,9 bt not the previous values.
NOTE: we can not do sth like: update set... where id = ... becoz the values are dynamic.
when i press when button pressed trigger, i want first the form will delete all the previous data and then populate the data from the table, that's why i used clear_block first, but this clear_code is not working here. my coding is given below
go_block('show');
clear_block(NO_VALIDATE);
declare
cursor c1 is select *
from qtr_demand order by 1;
begin
[code]..........
I am working on forms 6i. I have one data block based on table EMP.
Datablock-A: Empno, Ename, Sal
I have FIND Screen: Empno, Ename, FIND Button.
I can search the data through FIND Screen and populate data in Datablock A.
I am using below logic to search data through FIND Screen.
When-Button-Pressed(FIND Button): calling 'EXECUTE_QUERY'.
In Pre-query trigger of DatablockA:
copy(:FIND.EMPNO,'BLOCKA.EMPNO');
copy(:FIND.ENAME,'BLOCKA.ENAME');
It's working fine. But below case is failing.
Let us say, if i enter empno 10 (which is not there in database) in FIND Screen --> press FIND Button, it's showing up 'QUERY CAUSED NO RECORDS', Till this point it's working fine;. But after this, if i press CTR+F11 in block A, it's not pulling records. only this case it's not pulling records.
But if i enter something else in FIND Screen, if it returns any data, then if i press CTR+F11,it's pulling all records.
why it's failing to pull records if i try to query data in first case only.
I am trying to add a new column in a table and insert data from another column of same table.
alter table POSITION add INT_MK_DATA_ID number(10,0) null;
update POSITION set INT_MK_DATA_ID = INST_MARKET_DATA_ID;
commit
As there are huge number of records in the POSITION table ...its taking for ever to execute this query.
I have written a java code which reads 2 millions of data under a particular column from CSV file and store it into a set. Now there is a table in Oracle database which contains 10 millions of records for that particular column. Now, I want to form a SQL query which select those records under that particular column from the database table which is in CSV file but not in database table. For e.g.
If I consider the CSV file name as employee.csv and it has column called employee_name under which the records are as follows
employee_name
---------------------
Sudip
Kaushik
Joyanta
Soumya
Ritesh
Gautam
And the database table name called cmp_employee and it has column called employee_name under which the records are as follows
employee_name
--------------------
Sudip
Kaushik
Joyanta
Soumen
Souvik
Sahoo
Now, the "SQL Query" should return ---- "Soumya, Ritesh, Gautam" this three names.
I need to import some data from .csv files. There is one file each day, so I want them to be automatically imported into the DB. This is the format it comes in:
DSM,LOD,20120524,01,01,9999AMP02,1.1262240,M,0.6397380,M
DSM,LOD,20120524,01,02,9999AMP02,1.1315700,M,0.6450840,M
DSM,LOD,20120524,01,03,9999AMP02,1.1297880,M,0.6450840,M
I want this data to go into TEMP_TABLE. It then needs to reformatted as it goes from temp_table to my_table:
filename,readingID, field1,field2,date,num1,num2,meterid,read1,m1,read2,m2
so filename is the actual name of the .csv file that this row came from. And reading id is date, num1, num2, meterid combined. And the remaining fields coming from temp_table
This is what I have:
procedure import_data()
begin
TEMPFILENAME CHAR(60)='DSM_2010_Husky_Oil_20120525064122_20120525065011.csv';
create table temp_table
(dsm char(3),lod char(3),usage_date date,he char(2),reading char(2),loc_id char(9),mwh number(15,10),eormmwh char(1),mvar number(15,10),eormmvar char(1));
[code]....
, which does not work at all.
