I have a data block which contain no. of records displayed e.g 10 record...In That data block i used checkbox
My Requirement is when i click Select all checkbox , No. of checkbox record shown click mark..how to do that.
My development instance's APEx version is 4.1. I have two checkbox items works on cascading LOV. The cascading works very well as long as if I do not come back and check anything from the first checkbox item after I checked the second checkbox.
If I do, the cascade LOV refresh uncheck all checked values from the second box. My question is, how can I preserve the second check boxes checked values before refresh?
I am using oracle form builder 6i and oracle database 10g
1:I have table named 'info' column name 'InfoId'and some other.And another table named 'Handing' with column names HtId, Value1 and value2.
2:I made form that consist of three data blocks, first block takes criteria and second block display record against that criteria from table 'info'.
3:i want checkboxes agianst that display record,and want that when I select some checkboxes against 'InfoId' these selected 'InfoIds'
should save in another table named 'handing' in column 'HtId'.and in same table data in column value1 and value2 will be inserted through textboxes that are in the third datablock of the thae same form .
I am Using the Check Box in the Detailed Block & I Have Assigned values 'Y' and 'N' when Checked & Unchecked If there are 3 Values Retrieved in the Detailed Block, Among that 2 Values are Checked the Cursor is Directly going the 2nd Value and Displaying the 2nd Value 2 Times rather than Displaying the 1st Value.
Below Attached is the Code Which i am Using.
GO_BLOCK ('ITEM_RESULT');
L_ITEM_CODE := :ITEM_RESULT.ITEM_CODE;--71720;--
first_record;
loop
message (' item id is '|| L_ITEM_CODE || '-' || :ITEM_RESULT.CHECKBOX);
if L_ITEM_CODE is not null and :ITEM_RESULT.CHECKBOX = 'Y' then
begin
[code]....
I was working with forms and found a problem related to accessing of status of checkbox. In a block with multi record to be checked, if we want to check all the checkbox status which is already clicked, Then what should i do.
Now i am using the function Checkbox_check as:
if Checkbox_Checked('FVA.STATUS')
But the problem with this function, it is giving status of last clicked checkbox only.
I have a custom form build on Oracle Forms Builder 6i. It is divided into tow tabs I have to place a checkbox on tab 1 and control the values of a column present on tab2. When the checkbox is ticked the values in column should be 'X' and if the checkbox in unchecked all the values should be changed to 'Y'.
View 3 Replies View RelatedI have a multi row datablock with scroll bar. In each record I have a checkbox (let's call it check_record), and above these checkboxes, there is a checkbox to check/uncheck all the checkboxes (let's call it check_all).
If all the "check_record" are checked, the "check_all" must be automatically checked, else if one "check_record" is not checked, it will be unchecked.
To do that, I have put a loop in the WHEN-CHECKBOX-CHANGED of "check_record" to loop over all the "check_record" and see if they are checked or not.
Normally, this loop will automatically go to last record. But to go back to the selected record (where the "check_record" was clicked), I have used go_record with the record ID.
==> No problem in that, it's working fine.
Now, this is my problem: When clicking on a "check_record", the scroll bar moves to show the selected row in the first (or last) VISIBLE row in the data block, and that's because of using "GO_RECORD(<CURRENT_RECORD>)".
Example: if I select the third record in the data block, the scroll bar moves to show it in the first visible row.
Is there a way to "freeze" the scroll bar and keep the record in its initial position in the data block?
I have created a custom form which fetches certain records. There is a column called invoice_create_flag which is check box. By default when we query this form, value of check box is 'Y'. Another column is Amount.
Initially when form is called, all the records are selected. Hence it should show the total of all the records. Now If the users unchecks any record, System should deduct the amount of that particular record from the total amount.
Attached is form screenshot for reference.
I am using oracle forms 9i. I have to create a Hierarchical Tree and attach checkbox at its node,so that user can select which tree he want in its further processing.
View 4 Replies View RelatedMy requirement is I have placed a check Box in the Detailed Block and i have assigned values for the check box as
Checked - R
Unchecked - P
Initial Value - R
by default the check box would be displayed as Checked while inserting the values in to table the value of check box is not getting inserted but when the check box is unchecked the the value is getting inserted as P when the submit button is pressed.
I have a multi-record block with a check box(:B_ASTHEAD.CB_CHECK) for each record. user can select the record by clicking on the check box. when checked, value is 'Y' and when unchecked, value is 'N'.
when user clicks on 'OK' button (when button pressed trigger), the records which are selected(Checkbox) must be posted to the database table.
L_last_Rec number;
L_first_Rec number;
L_AST COP_DETL.AST%TYPE;
BEGIN
[Code]....
The issue here is , check box selected records are not getting inserted into table when OK button is clicked and i could see that all checked checkboxes become unchecked immediately . But if i comment the --"if :B_ASTHEAD.CB_CHECK = 'Y' then " part, then insert works , but inserts all record.
Insert only checkbox selected records.
Could i uncheck the checked checkboxes in a mutirecord block by any command?
View 1 Replies View RelatedI have a shuttle control (P8_SHUTTLE) that lists then names from scott.emp.
Now I want to create a dynamic action that fires when I click on one of the names on the left side of the shuttle control.
I want the dynamic action to recognize the name of the employee that was clicked, and then set the value of a text item (P8_LAST_VALUE) to that ename. (Eventually I want to display the department of that employee in the other text item).
Here are screen shots of my DA:
[URL].....
Currently, when I click an item in the shuttle control, the text item P8_LAST_VALUE remains blank.
I have tested the following html page:
<html>
<body>
Click me
</html>
and is working fine when I click on the button on the created page.
However, using the same thing under the "Action When Button Clicked -- Redirect to URL" when create a new button, i.e:
javascript:window.open ('file:///c:/sample/','Documents');
will only open a new window, but blank in content!
i m using oracle 10g 10.2.0.2 version.i create a form and using check box on this form.when i click this check box then loop is using behind it.and current cursor is going to last record
i want if i click 4 record then cursor is still showing on 4 record mean i click which record after using loopmy current cursor is showing on that particular record
how it is possible
what name is used to reverence the mouse cursor in Forms. I am trying to state that if the user reaches the last record in a file and clicks the mouse on the empty record below that they will get a message saying they are at the last record (basically so it means they have to manually click an add record button before they can add a new record)
I currently have this:
IF :SYSTEM.LAST_RECORD = 'TRUE'
THEN
<something here> := :SYSTEM.LAST_RECORD;
MESSAGE('You are at the last record.');
ELSE
DOWN;
END IF;
Where i have <something here> is where i assume the refence for the mouse cursor should go, of which i dont know the name, am i correct?
Another thing is that I have a checkbox that is originally NO but when set to YES cannot be turned back to NO.
I have accomplished this by putting the following code in the WHEN_CHECKBOX_CHANGED trigger and it works fine. However it also updates the checkbox to NO and then back to YES, , as a result this brings up my Are you sure you want to update message. I originally thought that if i took out the :in_active := 'Y'; the FORM_TRIGGER_FAILURE would stop the checkbox being changed in the first place but this didnt appear to be the case. how to accomplish this without letting it update at all (perhaps put something in the WHEN_VALIDATE trigger?
DECLARE
return_alert number;
BEGIN
if :in_active = 'N' THEN
return_alert := SHOW_ALERT('checkbox_alert');
:in_active := 'Y';
RAISE FORM_TRIGGER_FAILURE;
END if;
END;
I have more then one checkbox on my form,I want to get which one is checked on runtime and store it in global variable?
View 6 Replies View RelatedI need to implement a "Select All" function in a Data Block with All the Check boxes. It's a Database data block with 10 records to be displayed at a time. Check Box Items are in default layout. The requirement is when user checks/un-checks that select all check box which is placed on the left hand side of the other check boxes, it should select/deselect all the check box database items in that particular record.
View 7 Replies View RelatedWe have several interactive reports setup and some of them can display more than one screen of data at a time, depending on the results returned.
All of the reports have prev/next pagination links at the top and bottom of the reports. For the longer reports, if you click prev/next at the bottom of the reprot, the prev/next page will display. But, you will still be at the bottom of the page/screen. Is there a way to force the report to return to the top of the page/screen when prev/next is clicked?
how to display check box selected records in one column of form when push button is pressed.
View 1 Replies View Relatedi have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
I have a table where i need to update one field values based on another field of the same table , simply as it is.I have done this using one select all check box , on clicking that all check boxes of item_trans table will get selected , then i will un select some of check box and then using one button, i will update the value of the fields which are checked only.
I have put the sample code but when i am updating its taking long time and hanging.I am also attaching the form based on the test case provided.
--tables with insert statement
create table item_trans (trans_item varchar2(12),trans_qty number,trans_act_qty number)
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE1',40,NULL);
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE2',20,NULL);
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE3',20,NULL);
--i want to set the value of trans_Act_qty as trans_qty
--i create one dummy or test block to keep the select all check box. for that table test script is
CREATE TABLE TEST
(
C VARCHAR2(2000 BYTE),
B NUMBER,
A NUMBER
);
insert into test (C,B,A) values ('A',1,1);
--code written in select all check box which is created on test.block.
BEGIN
GO_BLOCK('item_trans');
FIRST_RECORD;
LOOP
:M_END_YN := :M_END_ALL;
[code].......
--code written in M_END_YN ( actual check boxes where i will uncheck).
IF :M_END_YN = 'N' THEN
:M_END_ALL := 'N';
END IF;
--code written on button to update those values which are checked.
BEGIN
GO_BLOCK('item_trans');
FIRST_RECORD;
LOOP
IF :M_END_YN = 'Y' THEN
[code]......
On a page I have let's say 5 rows (can be more or less) and each row ends with a checkbox. On the next page(next prcodure) I go through all rows, but I get a "No data found" when a checkbox is not checked. Checkbox's parametre is send using an array.How can I make sure is a checkbox checked or not. If it's not, I put a formHidden through in it's place?
View 1 Replies View RelatedI have problem with getting values of checkbox. I have search page where are some numbers field, date pickers, radio buttons and checkbox (P40_ OE) when I click search button I want to get report with filters like
select t1.id, t1.name, t1.company
from table1 t1, table2 t2
where t2.id = t1.id
and t2.oe in list of values from P40_OEIn checkbox I have 11 options to choose. I work in Apex 4.1.
How can I make this search or filter report working?
I am working in apex 4.2.1.
I'm having an odd problem with a checkbox on a tabular form. I created the checkbox by setting hte display as to "Simple Checkbox". The value of the underlying column sets to "Y" wehn checked and "N" when unchecked. This is what I want. The next thing I was trying to accomplish is to call a javascript function when the checkbox is clicked. So I put onclick="calculateTotal(this);" in the element attributes field. The code that it is calling is listed below. When I run the app and check the box I can seee I am entering the calculate Total function. Each of the alert functions is displaying what I would expect until I get to alerts 'IAH5' and 'IAH6'. For each of those I get an "undefined" in the alert.
So to see if this had something to do with the checkbox and added an onchange="calculateTotal(this);" to another field in my tabular form and ran it. This time I did not click on the checkbox but went into the field that I put the onchange on. When I changed this field and navigated away from it the function worked as I would expect. It displayed the appropriate values for each of the alerts and updated the fields on the screen as designed.
<script type="text/javascript">
function calculateTotal(pThis)
{
alert('IAH1');
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
alert('IAH2');
[code].......
I am running blank with this one.
I have a checkbox item called P46_PAGE2 with static LOV STATIC:;1
How do I check if it is check using Javascript.
m learning how to use checkbox item, and trying to get checked options values via application global arrays. So, this may be quite simple question, but I'm completely stuck here...When I was looking through various threads and guides, I've encountered checkbox corresponding array names like "g_f01" - "g_f50". And so far i saw that these names are derived from item name in generated HTML code, for example:
<input type="checkbox" name="*f10*" value="3" />
And this one stands for array name "g_*f10*".
However, when I tried to do the same thing - i receive item name which looks like "*p_v04*", and therefore, I can't figure out, which array name should I choose to adress it properly :(
My generated HTML snippet:
<input type="checkbox" id="P6_ANSWER_0" name="*p_v04*" value="3"/>
I have question about checkbox in classic report. I need to choose only one checkbox in every row, hot to ensure that only one checkbox can be checked at same time?
Checkboxes are defined in SQL query as:
apex_item.checkbox(1,msisdn,'UNCHECKED') as clear,
apex_item.checkbox(2,msisdn,'UNCHECKED') as to_analysis,
apex_item.checkbox(3,msisdn,'UNCHECKED') as to_barring
here is the picture:
[URL]........
How to check off checkbox with JavaScript. I tried
1) $("#checkboxID").prop('checked' , false) (jQuery)
2) $("#checkboxID").attr('checked' , false) (jQuery)2) document.getElementById("checkboxID").checked = false;Checkbox's list of values: STATIC:;1
Checkbox always states checked. When I append 'checked="checked" ' attribute (or simply checked) to this unchecked checkbox in Firebug nothing happens. Why ? I execute JavaScript code in Dynamic Action on button click. All other controls (textareas and textfields) are cleaned successfully except this checkbox. "Effected elements" property includes all needed items.
i have created form with table page to enter hotel details there is on 6 check box which are not database column .i have create these check box to keep days details when hotel give service .so i have use
LOV FORP1_MON STATIC2:;1 MONDAYP1_TUE STATIC2:;2 TUESDAYP1_WED STATIC2:;3 WEDNESDAYP1_THR STATIC2:;4 THURSDAYP1_FRI STATIC2:;5 FRIDAYP1_SAT STATIC2:;6 SATURDAYP1_SUN STATIC2:;7 SUNDAY
i have one more column operating days where i have use computaation to keep operating days.
:P1_MON||:P1_TUS||:P1_WED||:P1_THR||:P1_FRI||:P1_SAT||:P1_SUN
these 6 check box are used Source used :Only when curren value in session state is nullSource Type : Static Assignment (Value equals source attibute) Problem are when i create new record then these 6 check box are not clear cache and when i update any record value are not clear cache . i need when i create or update recor then all 6 check box should be null after keep recor.