have few exp dumps from earlier version of oracle 8i & 9i, now i wanted to import in oracle 11g. how to do or some URLs/Docs to refer ?I have read MOS Doc 132904.1 do from where i can get earlier exp/imp client and how to use on oracle 11g DB server ?
View 2 Repliesi'm writing a job to export data on a weekly basis and archive those data in-case needed to be re-imported in future, its important that we able to import successfully if ever needed.
can impdp perform checks to see if dumps are valid ?how about old imp?if not, will it be safe enough to rely on the export log file? in another word is it safe to assume its all safe if there is no error or warning in the exp log?
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query="WHERE E3RECV_DT LIKE '201305\%'" log=PGTB_IFDATA_conditional.log
I had just successfully finished a full importing from Oracle 9i DB to Oracle 11gR2 DB. My export was a full db export.
Prior to this importing, my 11g was a newly created DB with the default SYS, System etc.. schema. Their passwords is different from those in 9i.
However, i realised that after importing... their passwords in 11g was replaced by those passwords in 9i, including SYS and SYSTEM user...
I have new machine with oracle 11g and i have exported dump from oracle 10g . Now i need to import that dump on oracle 11g.
View 3 Replies View Related1) Is there a way to skip database jobs while exporting (EXPDP) ?
2) Is there a way to skip database jobs while importing (IMPDP) ?
Why do export-import require temporary tablespace? Since export-import do behave like DMLs, when does temporary tablespace be needed by datapump utility?
View 2 Replies View RelatedMy database size is around 2900 GB in AIX 6.1, database version is 10.2.0.3. Everyday I need to take expdp dump backup of a single table which is only 57 MB in size. It takes around 55 minutes to complete the dump backup.
I have noticed that when backup starts , in first phase it does table scan ( we have 330000 tables) , next purely backup begin. My query is ,
1. how to make first my dump backup?
2. is there any way to skip table scan ?
In our application, we are allowing user to upload data using excel sheet in UI. We are using PHP script in UI and using SQL Loader to load data from excel sheet to temp_table.
The temp_table has a primary key.
Here my question is , Is there any way to put some batch id for every upload in that table in automatic way ? so that we can easily extract the data by using batch id . we are using Oracle 11g.
I need to copy more than 1000 database users(without objects) from orcle 9i to oracle 11g. They don't allow to use any graphical tools.which is the best way to complete this task? does conventional export /import works for only users only ?
View 2 Replies View RelatedI have a RedHat Server with Oracle Ent. 8iI did a full export of all my current data bases ( DCTEST, DCPROG, DCUSAC, DCCAND)I now have the DC*.dmp files. How can I know import these files into Oracle Database 11R2?
Do you have a Step-by-Step how-to ?IF I don't have the scripts to re-create the databases how to go forward ?
how to Migrate Postgres DB Schema to Oracle 11 g??? Any tool for migration of postgres Schema to Oracle 11g .
View 2 Replies View Relatedi want to perform full export + import of an oracle 11g database as fast as possible. i was thinking to perform the exp+imp on the same command.in exp i can perform something like this :
mknod /oracle/migration/exp_pipe p
exp '/ AS SYSDBA' file= /oracle/migration/exp_pipe full=y | imp system/***@oracle_db file= /oracle/migration/exp_pipe full=y
i know that i can do both action in impdp when using a dblink, but the problem is that some objects in the database cannot be copied via a dblink. the question is if there's a corresponding datapump command to the old exp+imp command i presented.
I want to Copy a data from One oracle database to another.
I have checked Import/Export Utility but the problem is import utility doesn't support conflicts resolution techniques between rows.
For Example if there's a table in the source database have the same row key in the destination database. if i use 'Ignore' parameter with value = y, the destination table will have a duplicate rows.
I want to ask if there's another way to import data from oracle database to another with some mechanism of detecting the conflicts and resolve them?
I'm studying abt SQL*Loader. All I've learn it needs to have:
1. One text input file
2.Control file
3.Bad file...
But I'm confused where to put the input file...where to put the control file in which format and in control file what should I write...
My oracle version is:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
I am getting the following error while trying to import dmp file in oracle xe:
D:>imp system/manager file=pune_ucf.dmp tables=(ARR_TOT, DE
P_TOT) grants=no indexes=no rows=yes ignore=yes log=loc.log buffer=100000000;
LRM-00104: '100000000;' is not a legal integer for 'buffer'
IMP-00022: failed to process parameters, type 'IMP HELP=Y' for help
IMP-00000: Import terminated unsuccessfully.
I want to read the csv file and load into oracle table.But I am getting file with filename_<today date> for every day. Is it possible to use single External table to read file in dynamic.
or what is the best way to do this? My oracle version 10g in windows OS.
i have a .dmp file and i want to use the data in this file for my further practices. so, i need to dump the data in the .dmp file to the any schema exists in data base.
View 1 Replies View RelatedI have a flat file (student.dat delimiter %~| ) using control file (student.ctl) through sql loader. Here are the details.
student.dat
student_id, student_firstname, gender, student_lastName, student_newId
101%~|abc%~|F %~|xyz%~|110%~|
Corresponding table
Student (
Student_ID,
Student_FN,
Gender,
Student_LN
)
How do i map student_newId field to student_id field in STUDENT DB table so that new id should be inserted in student_id column. How do i specify the mapping in control file. I dont want to create a new column in student table. In control file i will specify the below, Is this a best approach?. Do we have any othe way?
STUDENT_ID *(:STUDENT_NEWID)*,
STUDENT_FN,
GENDER,
STUDENT_LNAME,
STUDENT_NEWID BOUNDFILLER
I am migrating data from a Solid Database to Oracle, I am using Flat Files to do that.
1.- I download the data to flat files from Solid
2.- I move the files to Oracle server
3.- I upload the data to Oracle
Now, I have done the 90% of the data base, but I have found some tables that has description columns and in this description the users writes enters, so when I try to upload the data to Oracle SQL loader cannot recognize this characters.
Example:
'25','0.','5.','0.','0.','0.','0.','0.','0.','0.','0.','0.','0.','',''
'26','0.','2.','0.','0.','0.','0.','3.','0.','0.','0.','0.','0.','',''
'27','0.','1.','0.','0.','0.','0.','0.','0.','0.','0.','0.','0.','',''
'28','0.','1.','0.','0.','0.','0.','0.','0.','0.','0.','0.','0.','',''
'29','0.','38.','0.','0.','0.','0.','0.','0.','0.','0.','0.','0.','',''
'30','0.','13.','0.','0.','0.','0.','0.','6.','0.','6.','0.','0.','|SE RECHAZA B20CS50SNW ^M
^M
SE RECHAZAN CINCO PZAS ^M
DOS MOD. HSC15I41EH,DOS MOD. HSK15I41EH |Agregó: 06/06/2009 12:22:50
|','DEV. A PROV.'
'31','0.','50.','0.','0.','0.','0.','0.','0.','0.','0.','0.','0.','',''
'32','0.','9.','0.','0.','0.','0.','0.','0.','0.','0.','0.','0.','',''
'33','0.','2.','0.','0.','0.','0.','0.','0.','0.','0.','0.','0.','',''
How can I solve this ?
MY DB Version: 10.2.o
OS: Windows Server 2003
I am trying to import on table which i have the export dump file which i take using expdp previously when i load that table on the same host
by using below command:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
after that i zip that dump and move it to external usb and now i need that table i copy that table and unzip that that dump
Command i am using to do the import is :
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
But the query of import is still runing even not showing any amount of rows to be imported.
i already make the tablespace in which the table was previosuly before dropping but when i check the sapce of tablespace that is also not consuming one error i got preiviously while performing this task is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_03" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_03": cdr/********@tsiindia directory=TEST_DIR dumpfile=CAT_IN_DATA_042012.DMP tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log
[code]....
i check streams_pool_size it will show zero and then i make it to 48M and after that
SQL> show parameter streams_pool_size;
NAME TYPE VALUE
-----------
streams_pool_size big integer 48M
But still it takes time
My database version
SQL> select * from v$version;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - ProductionOS version:
Windows 7 64bit I have schema(scott) export with schema level option and imported with different name as (scott1).At regular period of time i need to import the scott to scott1 without affecting existing records.such as
*1. Need to append new created records.*
*2. Need to append updated records.*
for the above requirement I did in the following way
expdp xxxx/******** schemas=SCOTT directory=dumpdir dumpfile=SCOTT_28-SEP-2012.dmp logfile=exp_SCOTT_28-SEP-2012.log imported in the following way impdp xxxx/******** AS SYSDBA REMAP_SCHEMA=SCOTT:SCOTT1 directory=DUMPDIR dumpfile=SCOTT_28-SEP-2012.dmp logfile=imp_SCOTT2_28-09-2012.log TRANSFORM=SEGMENT_ATTRIBUTES:n TABLE_EXISTS_ACTION=APPEND.
The problem is i couldn'table to append the records to existing tables the log error show such ways.
ORA-31684: Object type USER:"SCOTT1" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
[code].....
I am trying to run impdp over network to import tables only but i am getting an error saying not able to create metadata and the import fails
Here are the steps below,
1. Source database created a user and granted select on certain tables to the user.
2. Created a user in the Target database.
3. Created a public link as sys user in the target database.
4. granted imp and exp full database to both users and all the other privs.
5. Started the impdp from the target server.
The import fails with
$impdp abc/xyz directory=DATA_PUMP_DIR network_link=TESTAR logfile=net_import_proddev.log TABLES=impdb.abc parallel=12 REMAP_SCHEMA=IMPDB:ABC
Import: Release 11.2.0.3.0 - Production on Tue Apr 23 13:10:51 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "IMPDB"."SYS_IMPORT_TABLE_01": abc/******** directory=DATA_PUMP_DIR network_link=TESTAR logfile=net_import_proddev.log TABLES=impdb.abc parallel=12 REMAP_SCHEMA=IMPDB:ABC
[code]....
aix 6.111.2.0.3 I have an expdp dump from prod to be imported to our test database.I have imported it using impdp, but to my surprise the tables were imported but lots of indexes were not created? even If I have used TRANSFORM=SEGMENT_ATTRIBUTES:N just to use the default USERS tablespace. How do I import the indexes separately, skipping the tables and other objects?
View 14 Replies View RelatedHow to import data from excel(.xls) file to data base table
I have excel sheet(.xls) data details, I neet to upload details to data base table using procedure
excel sheet is not CSV file, so SQL Loader is not using
any alternative solution for this issue
I am using expdp command to export the table by specifying Query parameter. But i am unable to export the table based on the condition.
Ex:EXPDP username/password dumpfile=employee.dmp logfile=emp.log directory=DATADIR_EXP TABLES=EMPLOYEE query=EMPLOYEE:"UPDATED_TIME >= '04-JUN-13' AND UPDATED_TIME >= '05-AUG-13'" Estimate in progress using BLOCKS method...Processing object type TABLE_ EXPORT/ TABLE/ TABLE_ DATATotal estimation using BLOCKS method: 3 GBORA-31693: Table data object "<username>"."EMPLOYEE" failed to load/unload and is being skipped due to error:ORA-00933: SQL command not properly endedMaster table "<username>"."EMPLOYEE" successfully loaded/unloaded...Dump file set for <username>.SYS_EXPORT_TABLE_01 is: E:IMPDPemployee.dmpJob "<username>"."SYS_EXPORT_TABLE_01" completed with 1 error(s) at 12:34:45 Oracle 11g,
I want to import data in a csv file by SQL Loader.
but , I don't want to import some illegal rows when the column 'name' is null
how can I modify the SQL Loader ctrl file?
I try to transfer data from one database to another one through data pump via SQL Developer (data amount is quite important) exporting several tables. Tables export is doing fine, but I encounter the following error when I import the file (I try data only and data + DDL).
"Exception: ORA-39001: argument value invalid dbms_datapump.get_status(64...=
ORA-39001: argument value invalid
ORA-39000: ....
ORA-31619: ...
The file is in the right place, data pump folder of the new database. User is the same on both base, database version are similar.
I have schema level export for user SAMPLE1(Default tablespace USERS) on oracle 9.2.0.1 production database. I want to import into another 9i database on another server, so do i nneed to Create SAMPLE1 user and USERS tablespace in new database again.
View 5 Replies View Relatedlet us consider mytest schema is having 6 tables
tname tabtype
myt table
myaxpertlog table
abb table
ccc table
ddd table
xxx table
now from this schema i want full dump and also from myaxpertlog table i required metadata only not records.
c:> export mytest/log file=20130409mytest0904pm.dmp tables=(myaxpertlog) rows=n
if i tried i am get only one table but it does have records.