Is it possible to easily set up a single User Defined Metric, to monitor all the users quotas? I know I can do it, if I make individual metrics for each user. But was hoping there was a simple way of combining them all into a single metric.
I am using Oracle 10G2 Standard Edition on a windows 2003 Server.
I'm attempting configure User-defined Metric to send mails when happen warning or critical alerts .My environment is Cluster Database and I'm using OEM Grid Control
I created User-defined Metric for monitoring invalid object for example and scheduled this collect to every 5 minutes.On initial OEM page, I see alert violation, but don't receive mail for this. In my Notification Rules page, I added "User-Defined Numeric Metric" and includes object Check_Invalid_Objects, wich is my UDM.I receive several alerts violations, but don't UDM.
UDM_Violation.png ( 116.68K ) Number of downloads: 0
NotificationRule.jpg ( 218.78K ) Number of downloads: 0
ScheduleNotification.jpg ( 373.64K ) Number of downloads: 0
What are all the necessary steps in running a Windows OS .bat when a metric threshold has been tripped? Currently have a fully qualified path (C:scriptsRunthis.bat) entered in the Response Action column but no action is taken when threshold is reached.
When I view Database Throughput Metric Data, e.g. Consistent Read Gets (per second) using "Real Time: 30 Second Refresh", it appears that timestamp are 5 hours behind the current time. This can be also observed by "Last Upload" timestamp from "All Metrics" view of the database instance for "Throughput" Metrics.
It was not like this for EM GC10.2.0.2. I'm wondering if anything changed in GC 11g.
I even tried to set low alarm thresholds for "Consistent Read Gets" metric, it doesn't seems to work on the timestamp of the realtime data.
I have installed Oracle 10g on Windows XP. I created a database called orcl1 using DBCA and set the sys and system user passwords as "oracle". My windows xp operating system password is set as username:Bobby and password :welcome4all. Yet at the startup/shutdown page in Enterprise Manager, when I enter HOST CREDENTIALS as username:Bobby,password :welcome4all
and credentials for target database as username:sys,password :oracle, I get RemoteOperationException:ERROR: WRONG PASSWORD FOR USER .I don't understand why? Am I doing something wrong?
We have OEM and within are some great metrics and dashboards, with key information.We want to post some of these dashboards and metrics on our wiki page and/or within our application dashboards (we use jaspersoft.com/)
We do not want to give our normal users the access into OEM, so is there a way to somehow export these dashboards or access them via an anonymous user somehow?Either the dashboards themselves would be great, or somewhere to export the data the dashboards user - as i can then create the dashboards myself using the data.
example of dashboards/info to use would be: - General, Host CPU, Active Sessions, SQL Response Time, Space Summary, etc...
I am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
i have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
My problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
we have 5 database servers in different locations,
1.main database 10g(production) ip-192.1.1.1 2.standby for production 10g ip- 192.1.1.2
both are linux
3.another database 10g windows 4. another database 9i windows
both are in same location
5.new database 10g in linux ip-192.1.1.3 some other location i m having a system windows xp installed i m monitoring, all 10g by oracle enterpric manager linux os monitor by Putty software
and i m monitoring below 10g database by sqlplus. now how could i monitor all the database by oracle enterprise manager grid control installed in my system that windows OS installed.
i have change my database name successful but after that when i open my enterprise manager i can open it but i cannot do anything in enterprise manager . i cannot show any tabs there.. i have attached my this enterprise manager login page here
I am trying to create & use a new data type but keep getting a ora-0902 invalid data type error running on 10g express. The create type and select statements execute fine and select confirms the ssn_t is a type. The create table statement fails with the invalid data type error.
Here is an example.
CREATE TYPE ssn_t AS OBJECT ssn_type CHAR(11)); SELECT object_name, object_type FROM user_objects WHERE object_type = 'TYPE'; CREATE TABLE Z (A CHAR(4), B SSN_T);
That is I have created the User Defined Data Type as following. CREATE OR REPLACE TYPE Bit_Type AS OBJECT(Bit NUMBER(1,0));
After completing this creation of new UDT, I am trying to create the table with this UDT as follows, CREATE OR REPLACE TABLE Sample_Bit ( RegID Bit_Type);
I received an Error Message like: SQL Error: ORA-22913: must specify table name for nested table column or attribute 22913. 00000 - "must specify table name for nested table column or attribute" *Cause: The storage clause is not specified for a nested table column or attribute. *Action: Specify the nested table storage clause for the nested table column or attribute.
I'm calculating a Z score based on some simple numerical data thus:
create table t (id number, val number);
insert into t values(1, 1795); insert into t values(2, 1753); insert into t values(3, 1743); insert into t values(4, 1876); insert into t values(5, 1848);
[Code] .....
the logic is quite simple - calculate a moving average over the previous 12 rows, and a stdev over the same window. Then subtract the prior row's moving average from the current value, and divide by the prior row's stdev.
The issue is I want to expose this logic in a BI tool (OBI EE v10g), meaning I can't use the nested analytic functions. How to achieve this logic in a single analytic pass? The sql above took about 2 minutes to write this morning, then I've spent all day looking at user-defined aggregate functions, but haven't even been able to get the first step, the moving average, working. I can understand that I can probably create an udaf to replicate the avg(val) over (order by id ROWS BETWEEN 11 PRECEDING AND 0 FOLLOWING) functionality, but I can't see how to bundle the logic for the other three steps in the calculation into this.
From what I've read, the ODCIAggregateMerge should allow me to combine different threads that can return the different values I need for the current row calculation. Is this correct?
The only example udafs I can find are either not relevant (STRAGG) or very simple (ie don't appear to invoke multiple passes). I've also had a look at the COLLECT function, but again I can't see a way to use this.
I have designed a Login form which takes username, password and connect string is hardcoded.I have compiled it, made an fmx file. created a shortcut to desktop. given the BIN path in shortcut.
when i want to lauch it, oracle's default login popup is shown.It can be by passed while defining username/password@string in shortcut properties but it reveals the password. every one can access it. I want to launch my own form without logging in to oracle. how can i avoid default login popup?
If a user defined function in Oracle may throw and catch exceptions depending on input, now does the Oracle logs the exception? Fundamentally we are asking if Oracle logs any random DML errors (not bulk operation). We hope not, as we do not want our client DBA get concerned. There might be many levels of settings in Oracle to log or not log. So if Oracle may log it depending on setting, how do we suppress it either at Oracle specific schema level, or function level?
This is my user defined function:
create or replace FUNCTION ISNUMERIC(char_in CHAR) RETURN NUMBER IS n NUMBER ; BEGIN n := TO_NUMBER(char_in); RETURN 1; EXCEPTION WHEN OTHERS THEN RETURN 0; END;
Through sql*plus, how can I copy a user-defined type from other schema to mine?
I've granted the execute object privilege over the user-defined type to my user, so I can use the type.
I know I can manually write and create the type, but I wanna learn (if exist) a statement to copy the user-defined type, something like: CREATE TABLE x2 AS (SELECT * FROM x1);
I'm testing ORACLE DATABASE 11g R2 over Windows O. S.
I am migrating sybase to oracle database. A Java developer needs money datatypes.I said to them, please change the cast(<value> as number(19,4) in java code side. but they are not accepted because money data type is used most of the places.
select cast(0 as money) from bank_trans; this sql statements present in java code. I need to create user defined type is equivalent to money datatype.
My steps
I have create user defined data types
create or replace type money as object(money as numbeer(19,4)
select cast(0 as money) from dual;
it shows inconsistent datatypes error.
create or replace type money is table of numbeer(19,4);
how to define user defined exceptions for cases like, ==> when anyone tries to insert string values without using single quotation marks " '...' "? ==> update the column which is not present in table.
how can I define user defined exceptions for such cases?