I have created some views in one SCHEMA and made it invalid by dropping it's base table
1) Thru some queries, on SQL, I checked it shows there are invalid objects.
2) But even though , I refreshed DBCONSOLE Home Page it doesn't show the invalid objects.
3) How frequently ALERT METRICS are collected/refreshed.
When looking at some of the metrics available in OEM, I am puzzled by the interpretation:
1) Using the Host tab, and load metrics, I can get a metric for the Total I/O for the host .. I assume this is IOPS.
2) Using the Database tab, and the instance_throughput physreads_pc metric I can get a metric for the Physical Reads from the database instance per second.
3) We generally have several Oracle instances on the same server, and in all cases, the sum of the physical reads for each database is SIGNIFICANTLY higher that the total i/o for the host.
Am I interpreting the information incorrectly ? Does one of the metrics consider db_block_size ?
Any complete List iof possible Metrics from Grid Control after installarion? No User-Defined, only Standard Metrics. How can I find them, I just checked Documentation and Metalink - but no result.
Any list prepared before or can point to any "how to create".
In linux server for 11g oracle. how do I keep date time line for each error message?example as
cat alert_test.log | grep 'ORA'
grep 'ORA' alert_test.log
I like output as
Mon Aug 20 01:54:29 2012
ORA-01560 caused by SQL...........
I know we can use diag... But I want to some linux command for my debug.
I am facing below error so frequently in alert log file Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.1.0.6.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.1.0.6.0 - Production
Time: 03-JAN-2011 02:00:00
[code]....
I am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
View 1 Replies View Relatedi have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
Don't know what is wrong
How to start EM on windows 7?
View 3 Replies View RelatedMy problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
Not a zip file(End header not found)
we have 5 database servers in different locations,
1.main database 10g(production) ip-192.1.1.1
2.standby for production 10g ip- 192.1.1.2
both are linux
3.another database 10g windows
4. another database 9i windows
both are in same location
5.new database 10g in linux ip-192.1.1.3
some other location
i m having a system windows xp installed
i m monitoring, all 10g by oracle enterpric manager
linux os monitor by Putty software
and i m monitoring below 10g database by sqlplus. now how could i monitor all the database by oracle enterprise manager grid control installed in my system that windows OS installed.
i have change my database name successful but after that when i open my enterprise manager i can open it but i cannot do anything in enterprise manager . i cannot show any tabs there.. i have attached my this enterprise manager login page here
View 12 Replies View RelatedI'm trying to install OMS on AIX and one of the prerequisites is JDK 1.6.0 SR6 but I couldn't find it in the IBM site, can some one tell me where can I download JDK 1.6.0 SR6?
View -1 Replies View RelatedI am trying to start enterprise manager without success. i used to work after installation of db 10g but do day when i run the command below it fails. also i donot see any thing useful in the logs that am being directed to directory /oracle/Ora10R2/Orahome/localhost.localdomain_dse/sysman/log
[oracle@cdsdb ~]$ emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
Starting Oracle Enterprise Manager 10g Database Control .....
[code]....
I have two databases on the same oracle 11g install. The first (ORCL) database uses the default port for EM (1158). However, I don't know what the second one uses. I go to the portlist.ini file, but it only has the entry for the default (ORCL) database.
View 3 Replies View RelatedI tried to start my oem managing but got the following error.
[oracle@Eagle2 ~]$ emctl start dbconsole
OC4J Configuration issue. /home/oracle/app/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_Eagle_boomiedb not found.
How can I use OEM remotely?
my DB server is on 172.17.1.4 IBM-AIX
and my computer is 172.17.1.53
Because I am tired of using sqlplus :@
When i run EM ,in my explorer show these
SID = ORCL
instance is open agent is up but ...listener is down .my listener is active and run.... however i can connect to DataBase and execute DDL or DML transactions.How i could resolve it ?
I have a problem Mat view refresh...I have to take a snapshot of the table before nsert or update to the table....below is the code written to achieve this..
create materialized view my_view refresh complete as select * from t2;
create or replace trigger TRG_T2
before insert or update on T2
declare
X number;
[code]....
However this is not getting refreshed... Also i noticed that it works for the very first time (after first insert or update) and then for successive ones it doesnt.. ..
I have install oracle 11g database enterprise edition But i cannot find the Oracle Enterprise Manager after the installation. i want the gui based Oracle Enterprise Manager i have access the the web base Oracle Enterprise Manager but not the gui based.how to use and download the GUI Based Oracle Enterprise Manager ....
View 1 Replies View Relatedwhen i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
So I try lsnrctl start and i get:
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:26:25
Copyright © 1991, 2010, Oracle. All rights reserved.
TNS-01106: Il listener con nome LISTENER � stato gi� avviato
So I try lsnrctl status and i get:
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:23:34
Copyright © 1991, 2010, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
[code]...
The file "server.xml" in E:\app\Andrea.Rimoldi\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\ does not exist...
Is there any way to retrieve or recover this file?
when I run the form and do some action intheform (call procedure , etc..) how can to see what is the process in running in OEM? Do it have any way to monitor it?
View 1 Replies View RelatedI am trying to install OEM but the GUI asks for weblogic server home.i checked many documents in net but none has weblogic installation procedure. Is it the sequence of installation ?
View 2 Replies View Relatedam trying to create a backup job in my UAT/testing instance, but with little success. I'm trying to create a backup job to disk (backup is to be stored in a drive local to the DB server) and it seems simple enough, but I keep getting the following error:
The job submission has failed for the following reason
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at "SYSMAN.DECRYPT", line 5 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 408 ORA-06512: at SYSMAN.MGMT_CREDENTIAL", line 1007 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1400 ORA-06512: at SYSMAN.MGMT_JOBS", line 295 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
In "Recovery Settings", I have a "Flash Recovery Area Location" defined (path local to the DB -i.e. the server that the DB resides on), a "Flash Recovery Area Size" of 4 defined, and a Flashback Retention Time of 24 hours defined. Everything else is riding default values.
In "Backup Settings", there's nothing defined. Everything here is riding default values. As I understand it, not specifying a Disk Backup Location is fine so long as the Flash Recovery Area is defined. All the local services are turned on (scheduling, etc.).
If it's relevant, I mirrored the recovery/backup settings in UAT to the same as PROD, but changed what I needed to in order to accommodate the UAT environment (e.g. paths, etc.)
I want to manage my database remotely, through Internet. Is it possible to do that with OEM? Where can I find information related to this? Is there another monitoring software that allows me to perform this?
View 10 Replies View Relatedenctl is started but its status shows that EM Daemon is not running.What does it mean?And how can i reolve this error.
oracle@srv603484:~> emctl start dbconsole
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
[code]...
I have been starting to use OEM 10g and am configuring backups through the maintenance portion. Is there a way to get backup success / failure notification sent to an email address?
View 8 Replies View RelatedI suddenly started getting this error message "Error
java.lang.Exception: IOException in sending Request :: Connection refused: connect ". on the dbconsole of my database. Any clue where to proceed or how to find whats causing this error.
i am learning oracle technologies,i downloaded and installed 11g and log in as sys as sysdba in enterprise manager,in em certain tasks ask for password again, for example in main page when you want to edit the listener it asks for password, the problem is what kind a password does it want?, i tried os password and sys or system password but it did not work, it also happens when you try to shutdown the database,it asks for os and below it asks for another password,
View 2 Replies View RelatedI worked on SQL Server used a GUI,SQL Server Profiler, to debug queries. In ORACLE how to debug queries.Is there any GUI utility for debugging?.Can i see all the queries run by a specific user?.
View 1 Replies View Related