Data Guard :: Transfer Of Archive Log On Standby Database
Dec 9, 2010
I successfully created the standby database and the archive logs were properly moving on both the primary and the standby databases. For the proper transfer of the archive logs on the STANDBY database I used "FAL_CLIENT AND FAL_SERVER" in the pfile of the primary database specifying the location of the primary and the Standby respectively.
When I removed both the parameters from the pfile of the primary database still there was the transfer of the archive logs however there should not be "If I am not wrong" as I have removed both the parameters.
why there is still the transfer of the archive logs on the standby database.
View 3 Replies
ADVERTISEMENT
May 29, 2010
How to transfer redo log files to standby database..
View 1 Replies
View Related
Oct 8, 2011
1> Does dataguard in 10g use ftp/rsh to transfer archived log files to standby database or some other protocol?
2> In my primary database, archives are getting generated normally, there is no error in alert log file. But archives are not getting transferred to standby database. I am able to connect through sys user from primary server to standby database & vice versa.
Also, tnsping is working fine.
All was working fine till 2 days back & no parameter has been changed from database side. I am not able to transfer the file manually through FTP to standby server. Does it is the problem? Or dataguard doesnt use FTP protocol to transfer the files?
View 2 Replies
View Related
Oct 22, 2013
i have found an issue regarding log archiving on dest1. yesterday one sequence number 76871 not archive to dest1.alert logfile content as follow. i configure standby and ship archive manually with window copy command. i need this archive to complete recovery on standby database.
Mon Oct 21 09:29:28 2013
ARC2: Completed archiving log# 3 seq# 76869
Mon Oct 21 09:39:28 2013
Thread 1 advanced to log sequence 76871
Current log# 2 seq# 76871 mem# 0: D:ORACLEORADATAORC1REDO02.LOG
[code]....
View 7 Replies
View Related
Jun 18, 2011
We are planning to setup a data guard (Maximum performance configuration ) between two Oracle 9i databases on two different servers.
The archive logs on the primary servers are deleted via a RMAN job bases on a policy , just wondering how I should delete the archive logs that are shipped to the standby.
Is putting a cron job on the standby to delete archive logs that are say 2 days old the proper approach or is there a built in data guard option that would some how allow archive logs that are no longer needed or are two days old deleted automatically.
View 1 Replies
View Related
Mar 25, 2013
We recently configured data guard in test machine.Archives not applied in physical standby.Where i need to start investigation?
Primary
SQL> select THREAD#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
---------- --------------
1 301
[code]...
View 8 Replies
View Related
Feb 15, 2012
The archive log can not send to the standby database, how to do?
primary database spfile:
*.db_name=oracl
*.db_unique_name=oracl
[Code]....
Error 12170 received logging on to the standby
Error 12170 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'oraclbak'
Error 12170 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'oraclbak'
ORA-12170: TNS:Connect timeout occurred
*** 2012-02-15 08:31:50.678 60679 kcrr.c
PING[ARCq]: Heartbeat failed to connect to standby 'oraclbak'. Error is 12170.
*** 2012-02-15 08:31:50.680 58941 kcrr.c
kcrrfail: dest:2 err:12170 force:0 blast:1
kcrrwkx: nothing to do (end)
View 6 Replies
View Related
Dec 29, 2012
which of the following views on the physical standby will us correct information on synchronization with Primary database?
For example, when I checked v$archived_gap it did not return any rows but the max(applied_seq#) on v$archive_dest_status was lagging far behind from the max(sequence#) on Primary database
select max(applied_seq#) from v$archive_dest_status where dest_id=2;
select max(sequence#) from v$archived_log where applied='YES';
select * from v$archive_gap;
View 1 Replies
View Related
Nov 6, 2013
I have a Primary database and Standby database both in ASM. Recently my archive logs got deleted and i am trying to recover my standby database with an incremental backup based on scn from primary database. But i face the below error when i recover the standby database with the incremental backup taken in primary database.
RMAN> recover database noredo;Starting recover at 06-NOV-13using target database control file instead of recovery catalogallocated channel: ORA_DISK_1channel ORA_DISK_1: SID=21 device type=DISKchannel ORA_DISK_1: starting incremental datafile backup set restorechannel ORA_DISK_1: specifying datafile(s) to restore from backup setdestination for restore of datafile 00001: +STDBY/11gdb/datafile/system.258.805921881destination for restore of datafile 00002: +STDBY/11gdb/datafile/sysaux.259.805921967destination for restore of datafile 00003: +STDBY/11gdb/datafile/undotbs1.260.805922023destination for restore of datafile 00004: +STDBY/11gdb/datafile
[code]....
View 4 Replies
View Related
May 26, 2013
I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
View 5 Replies
View Related
Oct 17, 2012
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
View 1 Replies
View Related
Feb 16, 2012
If my standby database is read only mode,does it can app the archive logs which come from primary database?
View 2 Replies
View Related
Mar 23, 2013
I am new to Oracle and a beginner in Data Guard.
1) How to find archive log gap from Primary Database site?
2) Do I need the DB_UNIQUE_NAME when setting the LOG_ARCHIVE_DEST_2 ? What is the purpose of DB_UNIQUE_NAME in LOG_ARCHIVE_DEST parameter?
3) If archivelog gap happens standby db goes out of sync with the primary database. What does out of sync actually mean?
4) Primary DB knows where to transport redo data based on the location mentioned in LOG_ARCHIVE_DEST_n of Primary DB. Am I correct in my understanding?
View 3 Replies
View Related
Apr 22, 2011
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
View 2 Replies
View Related
Aug 30, 2013
If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
View 1 Replies
View Related
Mar 14, 2012
I want to get the execute plan of a sql in standby database(read only),but failed,how can i do?
SQL> explain plan for select count(1) from hxl.tb_objects;
explain plan for select count(1) from hxl.tb_objects
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-16000: database open for read-only access
SQL> select count(1) from hxl.tb_objects;
COUNT(1)
----------
22238018
SQL> select open_mode from v$database;
OPEN_MODE
----------
READ ONLY
View 4 Replies
View Related
Mar 10, 2010
I have two node rac running on SAN with ASM , i want to configure a single instance standby database for this.
View 2 Replies
View Related
Jul 8, 2011
To have physical standby database, the hardware and software versions should be same, including patch sets?
View 3 Replies
View Related
Sep 17, 2012
DB1 <Primary> - Production
DB2 <Physial Standby> - DR
I will need to startup my DB2 in DR segment for testing.If i perform the below, will it affect my Production DB? I need it to be up and running as well.
DR:
recover managed standby database cancel;
shutdown immediate;
startup nomount;
alter database mount standby database;
recover standby database until cancel;
alter database activate standby database;
View 11 Replies
View Related
Sep 7, 2012
Oracle RDBMS 11.2.0.2 on RHEL 5.6.
I need to drop standby database completeley and rebuilt physical standby for the same database. We identified there are lot of inconsistencies between primary and standby. How do i need to remove the standby? And what is the best procedure?
View 2 Replies
View Related
Dec 7, 2010
I was able to create the standby database on different server with the same name for the primary and standby database but I want to know that can I create a standby database with different database name than that of the primary database server.
View 1 Replies
View Related
Dec 21, 2012
creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
View 1 Replies
View Related
Jan 30, 2013
I have installed oracle 11g standard edition one and created both primary and standby database. now i want to know how to switch(convert) primary database to standby database.
View 8 Replies
View Related
Jan 16, 2013
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
View 1 Replies
View Related
Jan 16, 2013
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
View 31 Replies
View Related
Apr 19, 2011
During data guard configuration i have receive an error while connecting to stanby database from primary database rman prompt.
rman target sys/srk786@orcli
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Apr 19 09:59:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: ORCLI (DBID=3754068166)
RMAN> connect auxiliary sys/srk786@stnd
[code]....
View 1 Replies
View Related
Feb 2, 2013
I was using physical standby but my primary database had had some HW issue.So I had activated standby database to handle production.During 3 months, standby database was our live database and our old primary was unavailable.Now HW issue on primary has been fixed.And I want to set again my old configuration : means set primary and standby db.
I'm trying this :
1) check the SCN on old primary
2) Rman incremantal backup from scn
3) on primary db : catalog
4) on primary db : recover database noredo
View 1 Replies
View Related
Apr 4, 2012
how to create the standby database on the same machine. os-window xp 2000(32 bit window) oracle 10g 10.2.0.1.0.
View 4 Replies
View Related
Feb 18, 2012
How can i define the logfile of standby database when using then duplicate database to create the standby database? the flowing command can not run.
run{
duplicate target database for standby dorecover nofilenamecheck
logfile group 1 ('/u01/app/oracle/oradata/oracl/redo1_1.log','/u01/app/oracle/oradata/oracl/redo1_2.log') size 512M,
group 2 ('/u01/app/oracle/oradata/oracl/redo2_1.log','/u01/app/oracle/oradata/oracl/redo2_2.log') size 512M,
group 3 ('/u01/app/oracle/oradata/oracl/redo3_1.log','/u01/app/oracle/oradata/oracl/redo3_2.log') size 512M;
}
View 3 Replies
View Related
Nov 23, 2011
I have set up a single instance standbys for rac databases. Now, I need to offload the backups from the primary on to the standbys.
1. cancel managed recovery
2. connect to target(standby) and catalog and backup the standby
3. put standby in managed recovery mode.
I think following these steps, I can restore primary(?). Now, My question is, how can I use these standby backups to clone/refresh databases? I tried it by connecting to target(primary), catalog and auxiliary but rman is using the primary backups instead of standby's to refresh the auxiliary database.
View 7 Replies
View Related
