I have seen one command which I have not properly understading.
RMAN>change archivelog all crosscheck;
what is the difference with the below command:
RMAN>crosscheck archivelog all;
crosscheck backup of database vs crosscheck backup command
RMAN> crosscheck backup;
it shows all backup pieces.
RMAN> crosscheck backup of database;
it shows 2 backup piece of each backupset.
when should be use: crosscheck backup of database;
and when should be use: crosscheck backup;
Is the crosscheck command suppose to be able to clear catalog entries that are on tape? If so, explain why I still have entries for 11/14/2011 13:28:32 when the current date is 11/16/2011 11:17:45 and I have a retenion policy of 1 day?
This is a test system where I am testing backup to tape... Icurrently disabled the backup to tape and now backing up to disk.
RMAN> show all;
RMAN configuration parameters for database with db_unique_name OTAPDEV are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF;
[code]...
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
------- ---- -- ---------- ----------- ------------ -------------------
77333 Full 3.09G SBT_TAPE 00:03:05 11-14-2011 13:28:32
BP Key: 77339 Status: AVAILABLE Compressed: NO Tag: TAG_1111141325
[code]...
I've done a crosscheck backup in RMAN and the list of expired objects has actually gone down, in number, from the last time I did this ( 2 weeks prior). We do NOT delete anything from our RMAN catalog on a routine basis (ie. no "DELETE EXPIRED BACKUP commands were issued) so normally the list of expired backup objects increases with each RMAN maintenance task we do. Why the number of expired objects might actually go down in this particular instance ?
View 15 Replies View RelatedI am admin of my actual server and I want to backup all databases for later use. For that this is my approach.
1 - List all databases on the system
2 - Apply the backup command to each database
How i can take manually backup of datafile..using OS command
View 1 Replies View RelatedEvery Sunday in the month - Full Backup
RMAN > BACKUP DATABASE;
Rest of the days - Incremental Level 1 Backup.
RMAN> BACKUP INCREMENTAL LEVEL 1 DATABASE
Day of Month Backup Taken Backup Contents
1st Full Backup All files as of the 1st - Sunday
2nd Incremental #1 Files updates between the 1st and 2nd - Monday
3rd Incremental #2 Files updates between the 2nd and 3rd - Tuesday
4th Incremental #3 Files updates between the 3rd and 4th - Wednesday
5th Incremental #4 Files updates between the 4th and 5th - Thrusday
6th Incremental #6 Files updates between the 5th and 6th - Friday
7th Incremental #7 Files updates between the 6th and 7th - Saturday
8th Full Backup #8 Files updates from 1st,2nd to 7th - Sunday
9th Incremental #9 Files updates between the 8th and 9th _ Monday
10th Incremental #10Files updates between the 9th and 10th - Tuesday
11th Incremental #11 Files updates between the 10th and 11th - Wednesday
12th Incremental #12 Files updates between the 11th and 12th - Thrusday
13th Incremental #13 Files updates between the 12th and 13th - Friday
14th Incremental #14 Files updates between the 13th and 14th - Saturday
15th Full Backup CRASHES - NOT COMPLETED - Sunday
I would need to restore now from #8 ( full backup ) and #9 to #14 ( incremental backup )
Tell me the "restore command" to achieve the output?
how can i using the reset database to incarnation command? RMAN> list incarnation of database;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
------- ------- -------- ---------------- --- ---------- ----------
1 1 ORACL 1813843256 PARENT 1 2005-06-30 19:09:40
2 2 ORACL 1813843256 PARENT 446075 2011-11-28 03:21:33
3 3 ORACL 1813843256 PARENT 530572 2011-12-06 12:55:20
4 4 ORACL 1813843256 CURRENT 1763647 2012-03-06 18:50:20
RMAN> reset database to incarnation 530572;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of reset command on default channel at 03/06/2012 19:36:08
ORA-19902: incarnation key 530572 not found
Is there a difference between the first set of commands and the second? Typically, I just use the first set?
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS;
DELETE NOPROMPT OBSOLETE;
and
CROSSCHECK ARCHIVELOG ALL completed before 'sysdate -30';
DELETE NOPROMPT OBSOLETE;
what could be the reason that following 2 (RMAN) commands return different results?
RMAN> list archivelog all completed before 'sysdate-2';
RMAN> list archivelog until time 'SYSDATE-2';
We would take backup regulary by RMAN(catalog). Last two days we could not take backup. Backup start but after take backup some datafile then rman does not do anything.
View 4 Replies View Related10.2 Oracle database on Linux
Someone(a non DBA) removed the only sysaux datafile from the server using the rm command Obviously, the DB is still up and none of the schemas in the database have their objects right now.
This is not a critical database as you can see when I say that I have NO backup whatsoever. Even though I have the option of deleting and recreating the database, i want to know if I can avoid doing that.
Creating a file on the server with the same name OR creating a new datafile for the tablespace OR recreate the sysaux tablespace ?But how to do any of these? What else should be done ?
I have restored all datafile to new location (that is ASM) earlier it was on file system using set new name command (RMAN). Now when i'm trying to update control file with swicth command it is prompting error. Version is 11g R2.
RMAN> SWITCH DATAFILE ALL;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "all": expecting one of: "double-quoted-string, integer, single-quoted-string"
RMAN-01007: at line 1 column 17 file: standard input
What is difference between the flashback database(10g later) and incomplete recover?
View 5 Replies View RelatedWe are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
Here is the details
[oracle@localhost dbs]$ export ORACLE_SID=stby
[oracle@localhost dbs]$ sqlplus '/as sysdba'
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Oct 20 09:47:34 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> !
[oracle@localhost dbs]$ pwd
/oraeng/app/oracle/product/10.2.0/dbs
[oracle@localhost dbs]$ exit
exit
[code].....
I have problem on using "delete obsolete" in RMAN.
First, let describe my backup configuration.
1. Full backup every Monday (17-Oct, 10-Oct, 3-Oct, 26-Sep)
2. Incremental backup for other days
3. Enable autobackup of control file
4. Backup archive log every day
5. RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS
6. Execute "Delete obsolete" every day
7. control file is used instead of catalog
The results observed:
1. Backup of control files older than 30 days will be deleted
2. Backup of archive log files older than 30 days will be deleted.
3. Backup of datafiles older than ~14 days but before 30 days are also DELETED.
In my example, the backup of datafiles created at 26-Sep is deleted at 16-Oct.
I tried "restore database validate until time "sysdate-22"" at 17-Oct. And RMAN reported "datafile xx will be created automatically during restore operation". It seems that RMAN failed to do restoration up to 22 days ago. The retention policy I set seems not effective on datafile backups.
I checked view v$backup_set and the "Keep" is "No" and "Keep until" is empty.
The only thing I can think of, is the settings of "CONTROL_FILE_RECORD_KEEP_TIME". It is marked "7" in the Oracle, which is less than the retention. But I suppose this only causes the backup not deleted, but NOT be deleted earlier.
understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies View RelatedI have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
SQL> alter database mount;
Database altered.
SQL> alter database open resetlogs;
alter database open resetlogs
*
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
My scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
I need to make my database to ARCHIVELOG mode when i try it it gives below following error
SQL> alter database archivelog;
alter database archivelog
*
ERROR at line 1:
ORA-00265: instance recovery required, cannot set ARCHIVELOG mode
I have a database in Archivelog mode and Flashback mode. I am trying to connect to RMAN. But am getting the error
SQL> select name,log_mode,flashback_on from v$database
2 /
NAME LOG_MODE FLA
--------- ------------ ---
ORCL ARCHIVELOG YES
SQL> show user
USER is "SYS"
SQL> host rman target /
[code]....
I just switched my STBDY DB to a PRIMARY DB and I am ran the following:
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
using target database control file instead of recovery catalog
old RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
new RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
new RMAN configuration parameters are successfully stored
ORA-00245: control file backup operation failed
RMAN-08132: WARNING: cannot update recovery area reclaimable file list
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ORARZULB are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code]....
what causes this warning and how to get rid of it?
I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?
when i performed incomplete recovery i try to set until time but it shows RMAN-20207:until time or recovery window shoubld be before resetlogs.
View 3 Replies View RelatedBackgroud info:
host server crashed.
Database was not cleanly shutdown.
Database is not in archivelog mode.
Datafiles were saved.
My goal:I want to recover the database based on the available files.
My approach:
Install new database.
ALTER DATABASE BACKUP CONTROLFILE TO TRACE.
shutdown database.
Place available dbf files in the location for new database, replacing existing files.
edit trace file to create new controlfile. Script is:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "newdatabase" RESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
[code]....
My database is in NOARCHIVELOG mode.I took whole DB backup ( cold).Then just after half an hour I ran following script.
RMAN> RUN { RESTORE DATABASE;RECOVER DATABASE;alter database open;}
Starting restore at 24-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=133 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
[code]...
Starting recover at 24-FEB-12
using channel ORA_DISK_1
starting media recovery archived log for thread 1 with sequence 2 is already on disk as file /u01/app/oracle/oradata/PROD/redo02.log
archived log file name=/u01/app/oracle/oradata/PROD/redo02.log thread=1 sequence=2
media recovery complete, elapsed time: 00:00:01
[code]...
Why do I need to specify an option at the first place?As my redo is intact, it is not incomplete recovery and, I do not want to generate new incarnation of my database.Why oracle simply not opening my database?