I tried to import a dump in 11g that was taken in oracle 9i. The import started but it hangs after some time. Exactly say it check only the character set of the DB's then it hangs. let me know if there are any specific procedures to import a dump from 9i to 11g directly.
View 8 RepliesI have exported a schema dump with schema name as 'A'.I want to import that dump in to schema 'B'.how ?
View 5 Replies View RelatedI am facing a problem importing DMP file in 11g. While importing it gives me error not responding. I have to attached the jpg file for that to clear you my point whats wrong is going during import. My Dump is on 9i i want to import that on 11G R2.
View 4 Replies View RelatedI want to import dump file (without 2 tables) .The dump file contains 100 tables,indexes and constraints. So out of 100 tables i want to import 98 tables from dump file (without 2 tables).
View 13 Replies View RelatedIf I want to import 10g export dump file in to the 9i database, I am connecting to 10g database from 9i database using
exp user/password@10gdb ....
However is there any option like executing 9i catexp.dat on 10g database and do the export from 10g database itself to be imported into 9i?
I am trying to export/import of a schema who's size is around 60 GB.
Export parfile goes like this..
file=expdmp1.dmp, expdmp2.dmp, expdmp3.dmp, expdmp4.dmp, expdmp5.dmp, expdmp6.dmp, expdmp7.dmp
filesize=10240M
log=explog.log
owner=owner1
Import parfile goes like this..
file=impdmp1.dmp, impdmp2.dmp, impdmp3.dmp, impdmp4.dmp, impdmp5.dmp, impdmp6.dmp, impdmp7.dmp
filesize=10240M
log=implog.log
fromuser=owner1
touser=owner2
ignore=y
I am going to run this on production. So want to check it..
i have more than 100 dumpfiles to import into my oracle 11g database. i know how to import(impdp) for same named dumps but here all the dumpfile names are totally different(ex: aa.dmp,bb.dmp,).
View 3 Replies View RelatedI am trying to import a dump into my oracle 10.2.0.3.0 database on my win 7 professional laptop. The dump is exported from my win xp desktop pc running Oracle 10.2.0.1.0
Below is the error i get:
Import: Release 10.2.0.3.0 - Production on Fri Nov 12 15:57:52 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: system/password@orcl
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Import file: EXPDAT.DMP > F:PersonalDPISIMBA.dmp
Enter insert buffer size (minimum is 8192) 30720>
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
List contents of import file only (yes/no): no >
Ignore create error due to object existence (yes/no): no >
Import grants (yes/no): yes >
Import table data (yes/no): yes >
Import entire export file (yes/no): no >
Username:paymaster
Enter table<T> or partition<T:P> names. NULL list means all tables for user
Enter table<T> or partition<T:P> name or . if done:
when I press enter key, the console hangs and a window appears with "Console Window Host has stopped working" then the console closes prematurely.
What is the Default Path of Log File after Import Dump in Oracle 10g.
View 1 Replies View Relatedi have full export dump file....from this, i need to import only one procedure belongs to schema : IC_MIGR_DATA... i need to import into SCHEMA : rep_user...
iam giving syntax:
impdp system/icg0ld@ICPRD directory=DUMPDIR dumpfile=IC_FULL_19062008.dmp logfile=imp_IC_FULL_190608.log schemas=rep_user parfile=imp_proc.par
parfile :
--------
INCLUDE=PROCEDURE:"LIKE 'IC_MIGR_DATA.JET_UPLIFT'"
while importing, iam getting below error,
*****[oracle10@AIICDELL IC]$ impdp system/icg0ld@ICPRD directory=DUMPDIR dumpfile=IC_FULL_19062008.dmp logfile=imp_IC_FULL_190608.log schemas=rep_user parfile=imp_proc.par
Import: Release 10.2.0.2.0 - 64bit Production on Friday, 20 June, 2008 16:19:46
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_SCHEMA_01" failed to load/unload
ORA-31644: unable to position to block number 30698425 in dump file "/AIIC_backup/expbkp/dumps/IC/IC_FULL_19062008.dmp"
******
how to import this one procedure JET_UPLIFT , this has to be imported into REP_USER schema, owner of this procedure is IC_MIGR_DATA
How to import constraints only from a dump file using Oracle data pump.
View 1 Replies View RelatedI'm rying to import schema's from a dump file that came from a different environment.
What I have is:
1. dump file
2. log file of the export
I'm trying to import the file(containing three schemas) with remap_schemas, and it fails, gives a lot of ORA-00959: tablespace 'string' does not exist.
Now, I've read in OTN:
[URL]
that what you need to do in that case is to use the REMAP_TABLESPACE option,to redirect the objects to a different tablespace.
I don't see a name of the tablespace I'm getting the error for in the export log.I don't know if I have more tablespaces I have to redirect with REMAP_TABLESPACE.
I don't want to perform this 3 times, have an error, by that find out what's the next tablespace needing redirection and only then starting over...
How can I know from the dump file and the log file,what is the tablespace names i need for the redirection to my names? Or its just that the tablespace giving me the error is the only one in the dump file?
Is it possible to import a dump file using impdp data pump utility on oracle 10g where the export dump was taken using traditional exp utility and vice versa.
View 1 Replies View RelatedHow to import dump into specific tablespace instead of default tablespace users.
I want to import my dump file to newly created tablespace ,so how can i do that . I have created new user called cvm and while creating it i mentioned default tablespace to newly created tablespace . But when i try to import my dumo file it goes to users tablespace .
I have to copy all the procedures in database to local folder and extension( or file type) of each procedure is ".proc".
I did tried with dbms_metadata but as there are 300 procedures it consuming time & I want separate file for each one.
select
dbms_metadata.GET_DDL('PROCEDURE',u.object_name), u.object_name
from
user_objects u
where
object_type = 'PROCEDURE'
AND object_name in( 'P1');
What is the syntax for exporting only the procedures of a particular user.
View 1 Replies View RelatedProcedures, triggers and other object with character changed.
Every character was replaced by ã? the content of procedures and other objects after importing a schema for production approval.
Example:
EXCEPTION
WHEN OTHERS THEN
p_msgerro := p_msgerro ||
' Erro na selec?o da Unidade Administrativa. ' ||
The character (?) deveria ser (ã)
how can i import the oracle 9i dump file into 10g database, while iporting i get following error imp-00002 fail to open dump file
View 4 Replies View RelatedIs there is any way of reading from oracle dump file?
View 16 Replies View Relatedi need to dump the table from A schema to B schema with different table name.
Suppose i have TABLE A IN "A" SCHEMA i need to dump the table with DATA+sTRUCTURE in " B"SCHEMA WITH TABLE NAME AS B.
Is it possible to determine whether the dump file is created using data pump export or normal export method by just looking at dump file, If yes, how ?
Why i am asking such question is...normal export and data pump export would create a dump file with an same extension filename.dmp. So to avoid confusion during import, i would want to determine by what method the dump file was created.
Also this would be useful for me at the scenario when the customer sends me only the dumpfile and ask to import into target database. ( may be the customer don't know in what method the dump file was created ).
I have A Daily hot backup using Expdp Command On oracle 10g R2 installed on the Linux server. And I'm trying to move this Dump File to Another directory on Windows server 2003 over network using Ftp script which will be run after the export process finished Automatically.
View 9 Replies View RelatedI have a question on export dump file generation.
select sum(bytes)/(1024*1024*1024) "GB" from dba_segments where owner='JACK';
The above select query give the output of Schema size with 15 GB. When i perform the same schema export, the dump file size generating is 2 GB. What is the difference between the two scenarios as how come there could be a variation in file size?
I am in the process of upgrading our 9i DB to 10g . As they are on different servers, I have installed 10g on the new server and applied the latest patchset 10.2.0.4.
I am creating the production database and importing th e9i dump file into this.Now I will be testing the whole application that uses this database.After a week, I need to take the latest 9i dump and export to the new 10g DB.
Do I need to just import the latest 9i dump into the 10g db or do I need to do anything else?
Is it possible to identify what level of export by looking at export dumpfile .. whether it is a schema export,full export,table export,..
If yes.. how ?
We have two databases running on 10.2.0.4 and 9.2.0.8. Both are having the same unpartitioned table of size 80G. I am exporting the table on 10g by using parallel=8 and dumpfile with %U option. That took around 4 hours to export the table.
And on 9.2.0.8, i am exporting using below parameters, taking around 5 hours.
buffer=2000000
recordlength=64000
options i can try to speed up the export in both versions.
I want to take a schema level export .The schema size is 115 GB size . Do we require same amount of space to be available in server side (where we are taking a dump) as the schema size or less or more space is required in server side ?
View 6 Replies View Related i want to do a schema export from Database A. There are hundreds of users under this schema.I have to import this schema into other database say B. My question's are:
1) Do i need to pre-create only schema user or all the users under it.
2) Will the schema export all the roles,procedures,packages,synonyms,funsctions and triggers?
When I do the import the of succeeding dump, I drop the existing schema "SQL> drop user username cascade;" and import dump by " impdp system .... ". I would like to import a dump to an existing instance but only data import and will leave the current packages and other metadata untouched and unchanged on the said existing instance.
1. Do i need to drop user before the import if my requirements are the above?
2. If i need to drop user, what should be script.
3. For the import itself, what parameter should i use?
4. What are the necessaries I need to consider before doing the import.
I need to recreate/ clone my database to a new machine. The two machine are not connected in the network.
Step 1. (Oracle 10.2.0.5 AIX 64-bit)
expdp username/password@db1 full=y dumpfile=dp:fpac052912_dp%U.dmp logfile=dp:fpac052912_expdp.log job_name=full_exp
Step 2.
FTP dump files to Windows
Step 3. (Oracle 10.1.0.2 Windows 32-bit)
impdp username/password@db1 dumpfile=dp:fpac052912_dp%U.dmp logfile=dp:fpac052912_impdp.log full=y
I got:
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31619: invalid dump file "C:P7DBfpac052912_dp01.dmp"
Done in AIX:
create directory dp as '/bak'
grant read, write on directory dp to public;
grant exp_full_database to username;
Done in Windows:
create directory dp as 'C:P7DB';
grant read, write on directory dp to public;
grant exp_full_database to username;
grant imp_full_database to username;