I want to move all data from my users tablespace to anohter new tablespace i have created name test1
so how can i do this using expdp
i want to move all objects from this my users tablespace to this new tablespace
I need to move my indexes (around 300) from data tablespace to index tablespace. What's the best way to do it?
View 9 Replies View RelatedI am trying to move data from one schema in database A to another schema in database B and only move data not others (procedure, view, function). What is the best way to do it? I am thinking database link then insert into select from database link. Is there a better way?
View 8 Replies View RelatedI have a range partitioned table with one lob column. Each partion is on a separate tablespace except two partitions which are on same tablespace. Now I want to move a partition from one tablespace to another tablespace along with lob data. By using a simple alter table move partition will also move the lob data or there is some special procedure to adopt.
View 9 Replies View RelatedI have taken an export using expdp of schema, data of the schema spread across different tablespaces , now i want to import the data to only one tablespace.
View 1 Replies View RelatedErroneously created datafile, re: "/path/../large_rbs_03.dbf" was created under the SYSTEM tablespace which is supposedly be in the LARGE_RBS tablespace.
How do I make the said datafile be under LARGE_RBS?
We load large amount of data into multiple tables using sqlldr. Amount of data that we need to load varies according to the situation. We want to estimate the tablespace usage growth due to this data load, so we can verify/extend the tablespaces before the data load. Though, setting to autoextend will work in this case, We want to avoid extending the tablespace during sqlldr executing due to performance.
Our initial attempt was to note the tablespace size before and after executing the sqlldr and use the delta. But this delta was not consistent in different environments for the same amount of data. Different environments mean different oracle servers, different existing sizes of tablespaces, One data file Vs multiple data files etc.
How do we reliably estimate how much tablespace we need for the given amount of data?
How to import dump into specific tablespace instead of default tablespace users.
I want to import my dump file to newly created tablespace ,so how can i do that . I have created new user called cvm and while creating it i mentioned default tablespace to newly created tablespace . But when i try to import my dumo file it goes to users tablespace .
I want to move 350 database objects from one database to another database schema.
View 16 Replies View RelatedAim was to shrink datafile and got "ORA-03297: file contains used data beyond requested RESIZE value". Datafile size 7GB but used 128MB.
So created new Tablespace and moved all tables and index partitions to new TS. Now I see some entries in USER_INDEXES, which I need to move to new TS. But they are IOT's.
INDEX_NAMEINDEX_TYPETABLE_OWNERTABLE_NAME
SYS_IOT_TOP_1082946IOT - TOPDSI_DPIPESYS_IOT_TRNS_1082943
SYS_IOT_TOP_1082949IOT - TOPDSI_DPIPESYS_IOT_TRNS_162982
how to move these indexes to new TS.
C:UsersNeetesh>expdp system/*****@orcl2 dumpfile=temporary.dmp tables=testuser.test,testuser.test2
Export: Release 11.2.0.1.0 - Production on Fri Oct 19 16:39:06 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_TABLE_01": system/*****@orcl2 dumpfile=temporary.dmp tables=testuser.test,testuser.test2
[code]...
then i import it in new user
SQL> create user temp identified by temp;
User created.
SQL> grant create session ,create table to temp;
Grant succeeded.
SQL> alter user temp quota 10 m on users;
[code]...
it gives 2 errors both are same as -ORA-01950: no privileges on tablespace 'new_tbl'
exported table are exist in this 'new_tbl' tablespace but this is not exist in importing database.then is there any way to import these tables in 'users' tablespace or other tablespace other than 'new_tbl'?
how we can perform the tablespace management? monitor the tablespace and tune the tablespace space.
View 1 Replies View RelatedHow to import a dump file into different tablespace.
normally when i am importing a dump file it goes to the table space where it was exported but i need to import in to different tablespace
I want to transportable tablespace feature of EXP/IMP. I did it with no error. But when I check user by user I found that no Function Procedures were imported. How to deal with these objects using transportable tablespace feature.
View 8 Replies View RelatedI have already created large no of indexes on my Database without specifying specific tablespace, now I would like to move all the created indexes into particular tablespace.
View 3 Replies View RelatedI am trying to refresh tablespace containing indexes only. Can you let me know whether i am on the right track. Below is my query :
expdp directory=expdp DUMPFILE=user_index.dmp LOGFILE=user_index.log TABLESPACES=user_index
impdp directory=expdp dumpfile=user_index.dmp logfile=user_index_impdp.log tablespaces=user_index
I have been asked to take the export of a schema and then asked to remove all dependencies on tablespace. Provide me the syntax.
View 1 Replies View RelatedTwo different says in different documentation as below.
1) Import required same tablespace to fit the objects, otherwise it throws error.
2) Import by default uses the default tablespace to fit the objects, but some times it uses SYSTEM tablespace also.
confirm with the correct one.
I am using transportable tablespace to migrate from 10g to 11g from Windows to Linux System.
The steps are as follow On 10g make the tablespace read only mode and export the metadata information and copy the tablespace datafiles to the 11g server. Now on 11g when i am importing the exported metadata it says that the user does not exist and if i create the user and tablespace it does not work as it says tablespace already exist.
For transportable tablespace do i have to create the user already on 11g ? If yes then i also need to create the tablespace which i need to assign to the user.
Is this possible to run a direct impdp with database link for transport tablespace instead of first creating export dump and then using impdp.
I tried the below command and it shows up error.I have gone through the entire Oracle docs but could not find the exact command with network link for transport tablespace.
$impdp system/passwd DIRECTORY=data_pump_dir transport_tablespaces=TBS1,TBS2,TBS3 LOGFILE=tbs.log network_link=dblink
UDI-00015: invalid context or job state for parameter, 'transport_tablespaces'
When I am importing, I get these errors
IMP-00019: row rejected due to ORACLE error 1
IMP-00003: ORACLE error 1 encountered
ORA-00001: unique constraint (XXXXXXXXXXXXXXXX) violated
Column 1 2
Column 2 OFFLINE
[code]....
I added a datafile in undo tablespace (its an ASM database). I doubt that since I added the datafile to undo tablespace, I am getting this error.
move the tables with data present in the user scott(full) to another schema named test. In my case scott is in user tablespace and for test schema i have created different tablespace named test_tbs.
View 14 Replies View RelatedI am doing an import job and the following error occurs during Index import. is the reason for this error?
View 1 Replies View Relatedwhile importing data i got this error in my log file.and i cannot import my data successfuly
in my log file error i found like this
ORA-01658: unable to create INITIAL extent for segment in tablespace USERS
IMP-00017: following statement failed with ORACLE error 1658:
IMP-00003: ORACLE error 1658 encountered
ORA-01658: unable to create INITIAL extent for segment in tablespace USERS
IMP-00017: following statement failed with ORACLE error 1658:
i can import my data using imp utility using this syntax
C:UsersAdministrator>imp tiger/****@tcs file=E:DUMP s.
dmp log=E:DUMP s.log fromuser=tiger121 touser=tiger statistics=none
this my user tiger default tablespace its uses and its a auto extend on and locally managed tablespace,and i have enough space on my drive also.
I was wondering if there is any way to know in which Tablespace and Datafile my Table is located. I have exported a table and about to delete it as i am partitioning it.
View 9 Replies View RelatedI have database A (Working in Live environment) and Database B copy of Database (Not live) I have Restored whole database (A) RMAN backup file on Database (B) Previous week now i don't want to change anything in any schema and want to import only updated and new records in the table in Database B
There are around 20 schema If for example i have everything in new database B all required database objects like Procedure,functions, packages with indexes in all tables and data in tables, i just want to add new data and updated data.
IF i do following in source database
expdp directory=dpump_dir dumpfile=table_data.dmp content=data_only schemas=ACCMAIN,HRMAIN,..... include=TABLE
AND Import in destination database B, will it add new data and update existing one in table and not touch the table structure and indexes.
I am considering all of the capabilities and benefits of using Data Pump for exporting and importing extremely large data files. Would like to know if importing to tape is possible? If so, would the data be accessible if needed later?
View 4 Replies View Relatedi have a tablespace which contains 121 datafile(max limit reached) as a dba what we have to do?
creating a new tablespace with a datafile and assign the users to the current tablespace which i created now.iif the above process is correct,after some time the tablespace which was filled up got freed up.now can i give the access to the users previous (i.e. freed up tablespace) and current tablespaces
How to execute the SQLLDR, where Data File Reside in another Server?
View 1 Replies View RelatedI have exported data of one user an importing into another schema at another server. when i am trying to imoport it is working fine for quite no of imports into tables, but after some time it starts giving me below mention error...
IMP-00008: unrecognized statement in the export file:
<
IMP-00008: unrecognized statement in the export file:
<
IMP-00008: unrecognized statement in the export file:
<ے
IMP-00008: unrecognized statement in the export file:
+A
IMP-00008: unrecognized statement in the export file:
[code]...
