I have two Oracle databases (test1- 10gr2,test2 - 11gr2) on rhel 5.5. is it possible to find which particular oracle process belongs to which home from OS level. was trying to find which db processes are consuming more resources on my host.
View 4 Repliesis it possible to track the last access to a table?
View 2 Replies View RelatedWe have an oracle db V7.1 running on Open VMS V6.2. Lately we are having problems with oracle processes crashing...When I do a 'show sys' on VMS...I dont see any oracle processes running on it.....It should show 4 oracle processes....The trace is turned off on DB and alert.log has older info...We have another log which says the following
======================================
Wed 19:32:26 NoFLT
Wed 19:32:26 P19: (SendDelays) ORA-01092: (Cnct err, can't get err txt. See Servr Msgs & Codes Manua
Wed 19:32:26 ORA_NAS_PMON, ORA_NAS_LGWR, ORA_NAS_SMON, ORA_NAS_RECO are DEAD
Wed 19:32:26 P19: (GetNumDelaysNotFilled) ORA-03114: (Cnct err, can't get err tx
t. See Servr Msgs & Codes Manua
Wed 19:32:26 10
====================================
one of the drives has lot of errors but not sure how to check those errors....
I tried to restart the server and sometimes it comes backup. I have backups but really like to solve this issue. I know where the control files are located but not sure what would be good point to start this.
To investigate further on this error ,i want to find how many user connections got established during the error time and their details like machine,username,program,status etc in database ?
View 6 Replies View Relatedis there any view in oracle for getting the total number of processes and currently used process in oracle? i am using oracle 11.2.0.1.0.
View 3 Replies View Relatedwhat is flash back recovery area? what is its main function and usage
View 1 Replies View RelatedWe try to upgrade the 10g to 11g oracle instance and asm instance.Below steps we r done;
1)First we are install the 11.2.0.3 database and grid infrastructure in separate home.
2)after that i try to upgrade asm instance so i drop old 10g asm localconfig cd $ORACLE10g_HOME./localconfig deletecd $ORACLE11g_HOME./localconfig add but here i can not find localconfig Note:database and grid installed without error....
3)Even we are try dbua but it run 10g dbua we are not able to run dbua for 11g
4)inventory is corrupted how to recreate inventory
5)provide the steps for upgrade 10g asm to 11g asm
I am a oracle DBA with 2 and a half year experience.What I am hearing is some new tech nosql database which will take over from rdbms databases in a few years time. Is it true and can nosql used for OLTp environments.
View 15 Replies View Related if it is possible to install APEX version 3.0.1 on oracle database version 11.2.0.3? We currently have a 10g database with APEX 3.0.1 installed. Now for an upgrade project we need install the latest database version. Unfortunately we do not have enought time to migrate the APEX application. Therefore the APEX version should stay the same.
So any experiences with APEX 3.0.1 and RDBMS 11.2?(I searched for oracle documentation but couldn't find anything useful.)
I am installing oracle 11g under ubuntu 12.10(32bits) and getting an error 'all_no_orcl' 'ins.rdbms.mk'. It occurs when it tries to invoke the file.my laptop is 32 bits, 30.7 hd, 1.5 GB ram, 2MB cahe. The OS is installed on an external drive.
View 4 Replies View RelatedEnvironment:
Oracle RDBMS 10g R2.
DB OS: HP Itanium
We use Oracle EBS R12.1.2 in our company and one of the analyst reported performance with saving the configuration in Pricing module. The common fix is to gather stats on BOM_EXPLOSIONS table. Recently, when the issue occurred I collected statistics on the table. The performance didnt improve. I went ahead and decided to trace the Oracle form session using the profile 'Initialization SQL Statement - Custom" at user level.
I also monitored the session in OEM 10g grid. The analyst performed the same set of steps and the performance was normal and acceptable. Analyst tried again and performance was matching with the expectation. I cleared the trace profile and analyst tried again. This time analyst had worse performance as the original issue. The issue got fixed later part of the day on its own. This has made me curious and thought to discuss it here.
I have had similar experience with 10g and 11g, when I enable the trace on the issue cannot be reproduced and when trace is off the issue pops back up.
I have a form which contains some block (each block with some text item, two radio groups and a list item). I want to enable/disable and set visible property as true/false for first to last items of each block conditionally. I can do that for all items but radio buttons.
Because to set item or radio button property I need to pass that items ID or Name as parameter. I can get items name/type using get_block_property and next item of that item using get_item_property but unable to get radio button ID/Name using get_radio_button_property or any other built in. To execute get_radio_button_property or set_radio_button_property I need to pass radio button ID/Name. So, how I track radio button id or name in oracle forms? Is it limitations of Oracle forms?
I am trying to track an employee's department changes by adding a Department change counter which is set to 1 whenever the department changes otherwise it is set to a 0. How can I accomplish this update of the counter? Below is the table creation sql and sample data for insert.
CREATE TABLE EMPL_DEPT
(EMPLID VARCHAR2(11) NOT NULL,
EFFDT DATE,
EFFSEQ SMALLINT NOT NULL,
EMPL_RCD SMALLINT NOT NULL,
DEPT_ID VARCHAR2(12) NOT NULL,
[code]..........
we have a database application which is done frequently.in these we load data throught Sql loader, we create an DB instances, we do several DML operation on the database.
now for such task in an application we need to keep an logging track of each task performed in PL/SQl procedure packages.
we received a design advise to add columns to track the update and delete done on each row in our tables:
- DELETED_DATE_TIME
- DELETED_BY
- UPDATE_DATE_TIME
- UPDATED_BY
In our architecture, the application can only access functions/procedures to access/modify data. Each function logs the action, the executed sql statement, oracle error, user terminal, and the user into a unified log table by using v$ tables to create a general log function that is called after execution or error.
The only advantage is that it will be easier to know the delete and last update information faster versus space and design modification.
I have a trigger program to track updated information's on perks column. I am failing to finish systime in my trigger program.
SQL> desc user_track;
Name Null? Type
----------------------------------------- -------- ----------------------------
EID NUMBER
ENAME VARCHAR2(15)
OLD_PERKS NUMBER
NEW_PERKS NUMBER
UNAME VARCHAR2(15)
ACTION_DATE DATE
ACTION_TIME DATE
SQL> create or replace trigger tri_track
2 After UPDATE ON EMP
3 FOR EACH ROW
4 BEGIN
5 insert into user_track(EID,ENAME,OLD_PERKS,NEW_PERKS ,UNAME,ACTION_DATE,ACTION_TME) values
6 (:old.eid, :old.ename , :old.perks, :new.perks,user, sysdate, to_char(sysdate , 'HH24:MI:SS')
7 from dual;
8 end;
9 /
Warning: Trigger created with compilation errors.
SQL> show errors;
Errors for TRIGGER TRI_TRACK:
LINE/COL ERROR
-------- -----------------------------------------------------------------
2/1 PL/SQL: SQL Statement ignored
3/95 PL/SQL: ORA-00917: missing comma
I am writing a program in that i have to do a calculation in for loop when every 10 records processed. How can i track the number 10th record .
View 4 Replies View RelatedWhat could be the reasons that some queries execute fast when executed on sqlplus on server, whereas the same queries run slower with same input values fed from application screen?
One issue I guess would be bind variable peeking while using application whereas executing from sqlplus is causing hard parsing and thus getting rid of "peeking"
If displaying the data on application screen is taking time after data has been fetched, where I can see this delay?
I understand the elapsed time under 'Fetch' in tkprof will show time taken to fetch from database and not the time taken to be displayed in the application GUI
finally how to set arraysize in jdbc to improve performance by reducing roundtrips?
I have three blocks in my form , header,activity and item.One header can have many activities and one activity can have many items.I need to keep track of item value totals in header from items under each activity.
View 1 Replies View RelatedI was given a task by manager to keep track of changes on a given table including os_user who made it.Should I create a trigger on it (on any update, insert, delete etc.) or there is a better way of doing it ?I think there could be some info already in some data dictionary views or something like it.
If I CREATE MATERIALIZED VIEW LOG on that table.
In the program i wrote, posted in this thread I parallelize 340 jobs.
To do this, according to oracle documentation, i set the job_queue_processes parameters to 450. This works fine, all jobs are submitted, but, when i chek the dba_scheduler_job_run_details, i notice that there is a difference between REQ_START_DATE, which is my requested start date, when i enabled my job, and the ACTUAL_START_DATE, which is the date on which Oracle start this process.
And the more i submit job, the more difference between ACTUAL_START_DATE and REQ_START_DATE increase. But for each job, run duration is less than 1second. I check the processes parameter, and it is set to 100. if i have to increase the processes parameter to 450 too ?
Oracle database 11g Expression Edition 11.2.0.2
I want to change the the number of processes to 150 (default is 100) I did this by issuing the below command.
alter system set processes=150 scope=spfile;But why that modified value is not being reflected?
select name, value from v$parameter where name in ('sessions','processes','transactions');
NAME VALUE
-------------------- -----
processes 100
sessions 172
transactions 189
I am having a data guard setup done in oracle 10g(10.2.0.4.0) WINDOWS Platform. some of the archive process are locked in primary db side.
PROCESS STATUS LOG_SEQUENCE STAT
-------- ---------- ------------ ----
0 ACTIVE 0 IDLE
1 ACTIVE 804462 IDLE
2 ACTIVE 0 IDLE
3 ACTIVE 0 IDLE
4 ACTIVE 0 IDLE
5 ACTIVE 800011 BUSY
6 ACTIVE 0 IDLE
7 ACTIVE 800009 BUSY
8 ACTIVE 0 IDLE
9 ACTIVE 802335 BUSY
10 ACTIVE 0 IDLE
Shall we kill the locking archive processes? killing archive processes will cause any problem?
In PL\SQL program, I am writing information from one table to file. In my current architecture, I am writing the information to approximately 1000 files.
If I put the database write operation in another package and in another method and call this method from my PL\SQL program asychronously, can that increase performance?
Is there any way to tell what processes/sessions were connected to a DB after I get an ORA 20error. As you can see from the query results below, I did hit the max value of processes but I would like to know when it happen and who was connected.
I realize I can up the value, but before I do that I want to see what caused this to happen.
SQL> select * from v$resource_limit where resource_name in ('sessions', 'processes');
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL
LIMIT_VALU
----------
processes 221 1000 1000
1000
sessions 223 1020 1105
1105
select * from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionI got below error on the datases.
ORA-00020: maximum number of processesBased on the suggestion got from previous posts, I did kill some (LOCAL=NO) processes to get myself in. When I looked at the number of processes the number is 150, I changed it to 1000. After a day I got the same error.
ORA-00020: maximum number of processes (1000) exceededI killed processes again to let my self in, bases on the post below, I queried database
ORA-00020: maximum number of processes (%s) exceededHere is the query to find out if there are any processes with out session attached to it.
select spid from v$process where addr not in (select paddr from v$session);Result
SPID
null
35259840
36897866
13369762
[Code]...
To determine the from where greatest number of processes originated
SELECT MACHINE, COUNT(*) FROM V$SESSION GROUP BY MACHINE;Machine Count(*)
2
CAPITAL-D3F0092 1
DQAKDCDKLCSW01 14
desmond 20
DQAKDCDKLCSA01 52
My question is why I am keep getting this? Why do increasing process from 150 to 1000 did not resolve the issue?
What can I do to make sure that I don't get this error again?
i got this error..
ORA-00020: maximum number of processes (1100) exceeded
my oracle version is 10.2.0.2.0
when i was trying to login to oracle i got :ERROR at line 1: ORA-01012: not logged on
lucky i was having another sqlplus login ..
wht i should do to bring the number of process down without increasing the process value and shuting/restaring down db.
"Usually, when this happens, I want to get connected to the instance, so that I can try to figure out which user is causing the problem. One way to do that is to use the 'ps' command to identify some of the oldest server processes, and kill the 3-5 oldest processes, and then quickly try connecting to the database. Once you're in, you can look at things like V$SESSION to try and determine which user(s) is (are) consuming so many connections, and then go from there."
this is what i got from [URL]....
1.if i am giving ps -ef in OS it will give lot of detail ...
2. in v$session wht i should look for ....
I don't know if there is a beginner forum out there for PL SQL, but I cannot find one.I just started taking an Intermediate Oracle course to learn PL SQL. Today is my first day and I just installed Oracle 11g. I was in SQL Plus, tried the edit command. I got the message "wrote file Afiedt.buf" and then it was just a flashing cursor in the line below. I could not type any commands. I just hit the X to close the program.
What could I have done to exit the program with that flashing cursor since I was unable to type anything?
in my old database 9.2 (on AIX) i see high paging space usage for background processes.
#> svmon -Pg -t 1 |grep Pid ; svmon -Pg -t 10 |grep "N"
Pid Command Inuse Pin Pgsp Virtual 64-bit Mthrd 16MB
2285578 oracle 304609 81552 500909 605395 Y N N
3350676 oracle 304588 81552 500643 605149 Y N N
1794254 oracle 304592 81552 500634 605126 Y N N
[code]....
I am using Oracle 11g R2. (11.2.0.3)
I know that in the profiles of the user I can set limit for the number of sessions per database user, using the below command:
alter profile <profile_name> limit sessions_per_user=<required_number>;
I need to set maximum number of processes for the application user so in case they opened too many number of processes on the database they do not block the automated jobs to be run.My questions:
1. set a limit on sessions_per_user is it the same as a limit on processes? 1 proccess= 1 session ? Is there any way to limit the number of processes (not sessions) for a database user?
2. I am using RAC so the number of sessions is per the whole database, while the max number of processes is by instance (not database), so even I set a limit on the number of sessions (above the limit of processes for one of the instances) one instance may face ORA-20 errors, while the max number of sessions did not hit the limit. is there any workaround for this case?