I want to insert bulk records to the table. I want to insert date rows for next 50 years in table ( from year 2001 to year 2050). I have following columns in my table :
YYYYMMDD MM/DD/YYYY Day of the week ( Monday, Tuesday etc) JulianDate
How to insert more than 30000 records in a table using oracle procedure where I am having a table with number,varchar,data fields and columns like mpno,ename,sal,date of joining,data of leaving.
Data should populate using procedure.is there any way of doing it by procedure
I have a table of 10 records ,out of 10 records 2 records are having null values by using anonymous block i need to move the successful record(excluding null) into 'abc' tableand null records into 'err'table.
View 3 Replies View RelatedI have a data from the source table like this :
IdDate1 No1 Date2 No2
12/15/19959292 8/30/1997 11767
25/21/19932812 4/29/2002 2812
39/22/1978
410/11/19781157381 2/8/1979 929137
58/2/19891698430 11/30/1989 1365528
6
711/20/199541 1/23/1997 677
811/20/1995 1/23/1997 680
I want to insert into two separate tables using the following logic :
If date1 is not null or no1 is not null then insert into target_table1(id,date1,no1)
If date2 is not null or no2 is not null then insert into target_table2(id,date2,no2)
I have one indexed column in a table.for performance improval purpose i created index to that column .
my doubt is..it may decrease the performance while inserting data into that column?
I got Scenario that, i need to insert the number of records loaded in target table into the log table.
But the resultset is handled in the in the cursor. how to get the number of records the cursor handles.
/* Formatted on 08/03/2013 15:00:44 (QP5 v5.149.1003.31008) */
CREATE OR REPLACE PROCEDURE DASHBOARD75.SP_STG_MLY_GL_HKP_V1_00
AS
CURSOR GL_HKP
IS
SELECT CAL.MTH_NM,
CAL.YEAR,
GLM.BU_CD,
[code].......
I am trying to insert records into target table from three source tables by using function in a package and I am getting error as follows.
SQL> create or replace
2 PACKAGE
casadm.sis_load_cpl_sis_reb_pgm_hist
3 IS
4 /**********************************************************************
******************
[code]....
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00221: 'FN_LOAD1T_CPL_SIS_REB_PGM_HIST' is not a procedure or is undefined
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
which is the fast way of inserting 60 millions of records from a view to a table.
method 1:
create table t_temp_table as select * from v_dump_data;
method 2:
through bulk collect
---Bulk_Collect With FORALL----------
DECLARE
TYPE srvc_tab IS TABLE OF t_temp_table%ROWTYPE;
l_srvc_tab srvc_tab := srvc_tab();
l_start_time NUMBER;
l_end_time NUMBER;
l_error_count NUMBER;
[code].....
i have a master-detail form.
detail block is tabular.
when-button-pressed trigger iam inserting records in another table.i write
insert into ONHAND_QTY_LOCATION(sno,matid,matcode,description,partno,onhand_qty,location)
values (:ship_dtl.slno,
:ship_dtl.mat_id,
:ship_dtl.mat_code,
:ship_dtl.description,
:ship_dtl.part_no,
:ship_dtl.rec_qty,
:ship_mstr.place_from)
it is inserting only one record in onhand_qty_location table that too the last record.
i want all the records which iam entering in detail block should get entered in onhand_qty_location table.
I would like to know if we can insert 300 million records into an oracle table using a database link. The target table is inproduction and the source table is in development on different servers.The target table will be empty and have its indexes disabled before the insert. if this can be accomplished in less than 1 hour.
View 26 Replies View RelatedI have 1M Records coming from an External Data source as a Flat File (using ETL). Now I need only Yesterday's data only to load in my Database Table.
this can be done using Bulk Load and Filter.
write the CODE.
Second Part:-
Hint: if I need to update only those records been updated Say the Address1 field is updated. So this records need to update in my Master Customer Table.
If I have many fields in table and any records that are modified (coming to me from External Datasource as a Flat file) how to identify and update that record in my Master Customer Table?
shall we stop inserting data into a table before it inserting using Trigger?
View 3 Replies View RelatedI am trying to bulk update records in oracle using XML , front end is vb.net.Now the problem when i updating for 1000 - 5000 records on my development server. Its getting updated.
But when we are updating on the production server for 100000-200000 records , we receive error
"ORA-01460: unimplemented or unreasonable conversion requested "
Im a oracle pl/sql developer but I didnt learn oracle as a language. With my sql skills I started working on Oracle.In my project every table has an associated MLOG$ table for it.
For eg.
CREATE TABLE MLOG$_TEST
(
ID VARCHAR2(64 BYTE),
SNAPTIME$$ DATE,
DMLTYPE$$ VARCHAR2(1 BYTE),
OLD_NEW$$ VARCHAR2(1 BYTE),
CHANGE_VECTOR$$ RAW(255)
)
So is MLOG$_TEST oracle's internal table.
Whenever an insert/update/delete happens it is recorded in MLOG$ tables as I/U/D for the priamry key.So if I do a bulk delete of records in tables an entry is made into MLOG$ tables. So deleting old records in a database doesn't free much space.If this is oracle internal table is it advisable to delete from MLOG$ tables too.
My oracle database is mounted on the Linux server.If I delete bulk records in tables from which path I can see how much space is freed.
I have written a trigger which insert and update on same table and the select statement for update and insert is same. My trigger update the record but doesn't insert data and doesn't throw error as well.
if i substitue all the where condidion value of insert statement then it return row and insert data but doesn't insert when trigger fire so there is no issue with the syntex.
create or replace
TRIGGER SRVCCLLS_RVW
AFTER INSERT OR UPDATE OR DELETE ON SD_SERVICECALLS
REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW
DECLARE
[Code]....
if i substitue all the where condidion value of insert statement then it return row and insert data but doesn't insert when trigger fire so there is no issue with the syntex
I am trying to insert record from sql loader but this is inserting only single row.
View 3 Replies View RelatedI have a view SV (say) which holds approximately 33,000 records. But, when I try to insert these many records into a table SV_T (say) it is taking huge amount of time i.e. 2-3 hrs (approx.)
how reduce the time taken for the insert.
I'd like to insert a record between the records which are already in the table. There are over 40000 records, and I would like to place this new record at 19th place. How may I do so?
Let's consider an example with 5 records:
Table data:
CREATE TABLE enum
(identifier VARCHAR2(64),
code VARCHAR2(512),
data VARCHAR2(4000))
/
[Code]...
So when we check the table, we get:
SELECT * FROM enum
IDENTIFIER CODE DATA
---------- --------- ---------
HR_B_A Halli, L6 Halli, L6
HR_B_A Halli, L7 Halli, L7
HR_B_A Halli, L8 Halli, L8
HR_B_A Halli, L9 Halli, L9
HR_B_A Halli, P6 Halli, P6
HR_B_A Halli, P7 Halli, P7
What I would like to have when I run the select query:
SELECT * from enum
IDENTIFIER CODE DATA
---------- --------- ---------
HR_B_A Halli, L6 Halli, L6
HR_B_A Halli, L7 Halli, L7
HR_B_A Halli, L8 Halli, L8
HR_B_A Halli, L9 Halli, L9
HR_B_A Halli, L10 Halli, L10
HR_B_A Halli, P6 Halli, P6
HR_B_A Halli, P7 Halli, P7
The only way I can think of is transfer the data till L9 line in a table (e.g enum_temp), insert L10 line and then transfer the remaining data in that table. But I can't seem to figure out the syntax of the query.
I'm updating a large piece of legacy code that does the following type of insert:
INSERT INTO foo_temp
(id, varchar2_column)
SELECT id, varchar2_column
FROM foo;
We're changing varchar2_column to clob_column to accommodate text entries > 4000 characters. So I want to change the insert statement to something like:
INSERT INTO foo_temp
(id, clob_column)
SELECT id, clob_column
FROM foo;
This doesn't work, since clob_column stores the location of each text entry, rather than the actual content. But is there some way that I can achieve the insert with one call to a select statement, or do I need to select each individual record in foo, open the clob_column value, read it into a local variable and then write the content to the matching record in foo_temp?
I have Multi record Block and for that block i have created one button, if we press that buttion it will open new block and it will post the records, Unfourtunately that block table dont have Primary key or any constraints .. so when we press that buttoon multiple times .. its posting multiple times..
Now i need to restrict to that which is should not post the records multiple timies i have tried by controling the paraemter..I have created one Non data base item initially value i assigned to 'N"
if the value is "N" then am doing process and showing the records and after processing am assigning the value to 'Y', if there are multiple records , at block level in pre-record trigger am assigning as 'N'.
I'm calling sql loader recursively to load data from CSV files which has thousands of records in each file. If there are any duplicate records, the sql loader terminates with ORA00001. My query is how to ignore inserting duplicate records and continue with the load.
Most of the posts in forums suggests to use skip command. But i do not think that is a wise option in my case as we cannot predict the maximum error count. more over I have set up ERROR=0 in my code so that the code terminates in case thers is a data error.
any other way to ignore inserting duplicate records into the tables.
I got a form with few columns and a check_box. If the user selects n number of check boxes and click the button Save. The corresponding records should be inserted to XX_AP_CUSTOM table.
I have written the following below code in when-button-pressed trigger. With this i am able to insert only one record i.e where the current record indicator is there, even though multiple check-boxes(records) are selected.
declare
begin
IF :XXFBI_INV_QUOTE_ANAL_BLK.CHECK_BOX = 'Yes' THEN
--IF CHECKBOX_CHECKED(:XXFBI_INV_QUOTE_ANAL_BLK.CHECK_BOX) = TRUE Then
--app_insert.insert_record('WHEN-BUTTON-PRESSED');
insert into xxfbi.XXFBI_INV_QUOTE_ANAL(Item,
[code]......
I know that i have to use last_record and first_record and for loop to insert multiple selected records, but dont know how to do it.
I am using temporary table.
PROCEDURE Return_Summary(WX IN dbms_sql.varchar2_table,
WX OUT SYS_REFCURSOR) IS
Begin
FOR i IN 1 .. Pi_ WX.count LOOP
/* I need to put this results in a temp table or table object Can I use temp table for this or do we have any other recommended method. The loop might execute max of 10 times and for each run it might return 100-200 records. */
select WX_NM,
WX_NUM
from TAB A, TAB B, TAB C
where A.KEY1 = B.KEY1
and B.KEY1 = C.KEY1
and C.WX = WX(i);
End Loop;
End;
why bulk insert is not possible in a table which has index?
View 9 Replies View RelatedI am trying to delete 3 million records of data from huge table which already consists of 3 billion records.
This is hitting performance of DB and halting other activities of my users. Is there any easy way to delete such data fast. I have tried with forall delete but it is even taking lot of time.
I have a table emp as mentioned below:
SELECT * FROM EMP_TEST;
EMP_TEST
-----------------------------------------------------
ENO EFIRSTNAME ESECONDNAME DEPTNO
1 JOHN PAI 10
2 ABC DEF 20
3 EFG GHI 30
Now the primary key in this above table is pk_emp_test_eno on eno.
I have a requirement where i need to dump some dummy data (600000000 numbers of data ) into the emp_test based on these existing data without disabling the constraints (maintaining unique constraint for each record). And while inserting i want to commit after every 1000 insertion.
in bulk inserting dummy datas into the table as it is taking much more time to insert into the same.
1. how can i impose a restriction on a table so that the data gets updated only specific period of time say 9 a.m. to 10 p.m.
2. Can i use bulk collect in dynamic sql? If yes how?
I need to insert data in Table A from Table B where most of the fields are identical and might some of the fields will be more in Table A.
ex: Table A: a,b,c,d,e,f
Table B: a.b,c,g,h
How to insert this using user_tab_columns in cursor and if I am giving the i/P as my table names . This needs to be configurable and reusable rather i mention all the fields in my logic.
Using the Bulk collect for insert into table,it's raising the below error.
ORA-00600: internal error code, arguments: [25027], [130], [1], [], [], [], [], [], [], [], [], []
I am trying to update records in the target table based on the records coming in from source. For instance, if the incoming record is present in the target table I would update them in the target else I would simply insert. I have over one million records in my source while my target has 46 million records. The target table is partitioned based on calendar key. I implement this whole logic using Informatica. Looking at the informatica session log I find that the informatica code is perfectly fine but its in the update part it takes long time (more than 5 days to update one million records). find the TARGET TABLE query and the UPDATE query as below.
TARGET TABLE:
CREATE TABLE OPERATIONS.DENIAL_REGRET_FACT
(
CALENDAR_KEY INTEGER NOT NULL,
DAY_TIME_KEY INTEGER NOT NULL,
SITE_KEY NUMBER NOT NULL,
RESERVATION_AGENT_KEY INTEGER NOT NULL,
LOSS_CODE VARCHAR2(30) NOT NULL,
PROP_ID VARCHAR2(5) NOT NULL,
[code].....