I'm wondering what part of this query is wrong because obviously I'm not getting the desired results.
select a.iss_id,C.ISSR_ID
from ft_t_isid a left outer join ft_t_issu b on a.INSTR_ID=b.INSTR_ID
left outer join ft_t_irid c on b.INSTR_ISSR_ID=c.INSTR_ISSR_ID
and a.ISS_ID in ('CA13606ZDD20',
'CA780086AP98',
[Code]...
I know that the problem is in the joins. I expect to get 9 rows of result but I get a lot more and they are not even what I'm looking for.
I have 8 tables and I want full outer join on these to get the output. The tables are very small having 10 rows at max and consists of only two columns (date and value).
CREATE OR REPLACE TYPE CourseList AS TABLE OF VARCHAR2(64); CREATE TABLE department ( courses CourseList) NESTED TABLE courses STORE AS courses_tab; INSERT INTO department (courses)VALUES (CourseList('1','2','3'));
[code]....
The query returns the correct data, CourseList that are not subset of any other CourseList of the table.
I am trying to convert this not exists in a left outer join query to check if the performance is better, but I don't know how to do it.
I was making some variations of this code :
select d1.courses c_1, d2.courses c_2 from department d1,department d2 where d1.courses<>d2.courses(+);
i want to know the difference between Left outer join Vs. Right outer join? Its like which join is safer to use or is there any recommendations to use any join?
I have an attendance table in which we have empno, time_in, time_out..etc.
I want to create a matrix report that should shows all dates of any specific required month in columns and present empno in rows and time_in in cells.
I did it with using a temporary table by filling all the required dates and outer join with attendance table, it works fine, but it takes so long, is there any other better fast way to do it?
For all the records in table B I am trying to get discount information from table A. Each bill_id has one or many billing_line ids.It is not mandatory that all the bill_line_id from table B should be present in table A.in other words: a.bill_id can be 100 and a.bill_line_id = 456 but in table B, for b.bill_id =100 there can be b.bill_line_id = 123 and bill_line_id = 456.
I am joining the 2 tables based on bill_id, bill_line_id, and the start and end date.I am not sure how the outer join is done...Basically for every bill_id i need all bill_line id from table A.I am not sure how to *outer join on only one column*. When i tried it did not fetch all the rows from A.
select * from table B left outer join table A on a.bill_line_id = b.bill_line_id and a.month = TRIM (TO_CHAR (b.sale_begin, 'Month')) and a.year = extract(year from b.sale_begin) where a.bill_id = b.bill_id
This is what I need: for every bill_line_id in table B i need discount information from table A if that bill_line_id is not in table A, the discount can be null. But, the bill_line_id in A and B should be for the same bill_id a.bill_id = b.bill_id and the outer join ......
select dem.NUM_PCE, memo.comment from demand dem, dem_comment memo where CONCAT(dem.NUM_PCE,dem.NUM_DEMANDE) = memo.parentId (+) and memo.dateCreation = (select MAX(DEM_DATE_CREATION_MEMO) FROM dem_comment memo WHERE memo.parentId = CONCAT(dem.NUM_PCE,dem.NUM_DEMANDE))
I should have a result with this request but there's nothing and the problem come from the fact that when the following condition is not met, there are no resulty even if there's an outer join
and memo.dateCreation = (select MAX(DEM_DATE_CREATION_MEMO) FROM dem_comment memo WHERE memo.parentId = CONCAT(dem.NUM_PCE,dem.NUM_DEMANDE))
This condition makes Oracle ignores the outer join..I have tried to add this:
select dem.NUM_PCE, memo.comment from demand dem, dem_comment memo where CONCAT(dem.NUM_PCE,dem.NUM_DEMANDE) = memo.parentId (+) and (memo.dateCreation = (select MAX(DEM_DATE_CREATION_MEMO) FROM dem_comment memo WHERE memo.parentId = CONCAT(dem.NUM_PCE,dem.NUM_DEMANDE)) or memo.dateCreation is null)
but there are too much records and the result is not consistent
Transaction may have returned transactions. We use outer join to join the tables using TXN_ID. We have a report that shows the following data...The report use the following basic query to check all transactions with returned transactions information...Quote:
SELECT t.txn_id, t.txn_date, rt.ret_txn_id FROM TRANSACTION t, return_transaction rt WHERE t.txn_id = rt.txn_id (+) Result TXN_ID, TXN_DATE, RET_TXN_ID 100, 2010/03/10, 500 102, 2010/03/11, 501
If user want to check all transactions with no returned transactions, a where clause is appended to the query Quote:
SELECT t.txn_id, t.txn_date FROM TRANSACTION t, return_transaction rt WHERE t.txn_id = rt.txn_id (+) AND Nvl((SELECT 1 FROM return_transaction rt WHERE t.txn_id = rt.txn_id),0) = 0 [code].....
I am trying to use Full Outer Join, here is the DB version and test case
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production With the Partitioning, OLAP and Data Mining options create table tab1 (The_Date DATE, x_ID varchar2(4), x_CODE varchar2(10), r_qty number(8)) create table tab2 (The_Date DATE, x_ID varchar2(4), x_CODE varchar2(10), o_qty number(8))
tab1 can have multiple records for key fields The_Date + x_ID + x_CODE insert into tab1 values (to_date(sysdate)-2, '001', 'ABC', 100) insert into tab1
[code]...
tab2 should have unique record for key fields The_Date + x_ID + x_CODE
insert into tab2 values (to_date(sysdate)-2, '001', 'ABC', 1000) insert into tab2 values (to_date(sysdate)-2, '001', 'XYZ', 1500)
I am working on a query that has outer joins. The result of this query has to be stored into a table. When i execute this query alone (without INSERT command) it works absolutely fine but when i put the INSERT statement it gives me the error message "ORA-01719: outer join operator (+) not allowed in operand of OR or IN". The thing is I dont have an IN or OR in my query. I am in the middle of something
Attached is the screen shot of both the result and the error message. Query mentioned below:
<INSERT into table query comes here..> select * from ( SELECT yy.ACCOUNTID, yy.dump_date, yy.balance, yy.Last_30days_activity,zz.GSM_Balance, nvl(yy.SUM_GSM_REV, 0) from (
How to use outer join condition in my below query.In the table APPS_JP.GEDIS_OFFER_HEADER goh I have more recordsin the table APPS_JP.GEDIS_ORDER_BUILDS gob I have less number of records. I want all the records from
APPS_JP.GEDIS_OFFER_HEADER goh including other conditions.I have tried goh.OFFER_NO=gob.OFFER_NO(+) but same result. [code]SELECT GOH.ORIG_SYSTEM, gsp.USER_NAME, goh.ORDER_NO, goh.OMEGA_ORDER_NUMBER, goh.ORDER_TYPE, gc.CUSTOMER_ID, gc.OMEGA_CUSTOMER_NUMBER, CASE WHEN gc.PRIVATE = 'N' THEN gc.CUSTOMER_NAME ELSE ''
i have a query that is not working properly. i am trying to join two tables and i have OR condition and outer join..i am getting error ORA-01719: outer join operator (+) not allowed in operand of OR or IN..my query is as follow
SELECT l.* FROM table1 l, table2 map WHERE (NVL(l.id, '-99') = NVL(map.id(+), NVL(l.id, '-99')) AND l.TYPE = 'TKE') ) OR (NVL(l.id, '-99') = NVL(map.id(+), NVL(l.id, '-99')) [code]....
)So basically in the query above i am saying that if type ='TKE' dont do the join on all the pos columns. if type is not TKE then do all the joins on all the pos columns etc.how can i rewrite query so that i can use OR and the outer JOIN in same query?
I have a couple of questions to ask. see below that I have provided a script to re-create my problem.
Question 1.
I have the following query that will not run when I include columns (see 1.2) in the select but will run when I use the asterix symbol (see 1.1)
*1.1 Runs with no problems* select * from ora full outer join txt on ora.ora_id_y = txt.txt_id_y;*1.2 Returns error.* select txt.txt_id_y , txt.txt_n
[code]...
Is it possible to use one query with self joins and using multiple full outer joins to accomplish what I have below which is 6 view to get to the query that I have in Question 1.
CREATE SCRIPT drop table master; create table master ( id varchar2 (10 char) , txt varchar2 (1 char)
I have a basic requirement to report rows from one table where the second table do not have the same record (basically same key).I understand that we could achieve this using not in or not exists clause. But I think using outer join probably be the simplest one. However, I could not achieve what I actually wanted using outer join
Test Case:
create table tab_1 (a number(1), b varchar2(20)); insert into tab_1 values (1,'one'); insert into tab_1 values (2,'two'); insert into tab_1 values (3,'three');
create table tab_2 (a number(1), b varchar2(20)); insert into tab_2 values (1,'one'); insert into tab_2 values (2,'two'); commit;
Now, I framed the query as
select y.a ya, x.a xa, x.b xb from tab_1 x, tab_2 y where x.a = y.a (+); /
YA XA XB ---- ---- ---- 1 1 one 2 2 two 3 three
In this case, as there is no corresponding record in second table, the value of YA is showing as null as shown above.Hence, I changed the query as
select y.a ya, x.a xa, x.b xb from tab_1 x, tab_2 y where x.a = y.a (+) and y.a(+) is null; / YA XA XB ---- ---- ---- 1 one 2 two 3 three
I dont understand why it is behaving in that way. I am rather expecting the output to come as:
The requirement is to show all the employees from employee_master and with total billable hours and non billable hours, if not exist, show zero.The output will be:
The question is to write a Left outer join query or to write a PL/SQL function which can return total rows if Employee_ID is supplied to it as a parameter
Query 1: Select Employee_ID, Employee_name, sum(Billable), sum(Non_Billable) From ( Select a.Employee_ID, a.employee_name, decode(b.project_type, 'Billable', hours, 0) as Billable, decode(b.project_type, 'Non Billable', Hours, 0) as Non_Billable from employee_master a left outer join employee_time b on a.Employee_ID=b.Employee_ID ) Group by Employee_ID, Employee_Name
Query 2: Select Employee_ID, Employee_Name, func_billable(Employee_ID) as Billable, func_non_billable(Employee_ID) as Non_Billable From Employee_Master
Which query is good from the performance perspective? In real situation the employee_time is a very huge table.
How to use outer join condition in my below query. In the table APPS_JP.GEDIS_OFFER_HEADER goh I have more records in the table APPS_JP.GEDIS_ORDER_BUILDS gob I have less number of records.
I want all the records from APPS_JP.GEDIS_OFFER_HEADER goh including other conditions. I have tried goh.OFFER_NO=gob.OFFER_NO(+) but same result.
I have the following query but it is taking too much time because of the LEFT OUTER JOIN on HST table which is a huge table , is there an alternative to LEFT OUTER JOIN that can be used to optimize the code:
I have problems with the query below. Left join and right join is working. Well actually it's not working correct I think but that's another story wich I will leave for another posting. But with full join I am getting error ORA-00932.The columns starting with id_ are of number datatype and the ones starting with dat_ are of type date.Oracle points out the last line to be faulty. If I make that line a comment it points out the preceeding line and so on.
SQL> / and trunc(t.dat_trans) <= to_date(:sql_dat_avst_tom,'yyyymmdd') * ERROR at line 24: ORA-00932: inconsistent datatypes: expected NUMBER got DATE
I've created a query so I can easily compare two sets of data for two different instruments:
select a.CalId, a.AtName, a.NRef, a.VaLoat, a.ValTime, a.ValRing, cvs.NRef, cvs.CalId, cvs.AtName, cvs.VaLoat, cvs.Valtime, cvs.ValRing from CalcAttribute a, CalcAttribute cvs where a.NRef like '438815' and cvs.NRef like '438813' and a.CalId *= cvs.CalId and a.AtName *= cvs.AtName union
[Code]...
This works great - however I want to add an addtional condition, basically so it only returns where the two are not equal.
I thought I should just be able to add an extra: and a.ValLoat *<> cvs.ValLoat and a.ValLoat <>* cvs.ValLoat
But it doesnt seem to like this (Incorrect syntax near '<'.)
Oracle v11.1 Standard edition. I am trying to use TRIM function around the columns which are used for outer join and it's not working. However, if I use ANSI syntax, it works. Please check the SQL below.Is there any way, I can use old syntax and TRIM and get the outer join to work?I know, I can fix/trim the data in the tables, but for some reason (need to keep the data exactly same as we received it), that is not possible here.
SQL>SQL> desc tabaName Null? Type----------------------------------------- -------- ----------------------------COL1 VARCHAR2(20)SQL> desc tabbName Null? Type----------------------------------------- -------- ----------------------------COL1 VARCHAR2(20)SQL> select a.col1, b.col1 from taba a, tabb b where a.col1 = b.col1 ; no rows selectedSQL> select a.col1, b.col1 from taba a, tabb b where trim(a.col1) = trim(b.col1) ;
COL1 COL1 -------------------- -------------------- A AC CD
DSQL> select a.col1, b.col1 from taba a, tabb b where trim(a.col1) (+)= trim(b.col1) ; select a.col1, b.col1 from taba a, tabb b where trim(a.col1) (+)= trim(b.col1)
*ERROR at line 1:ORA-00920: invalid relational operator
SQL> select a.col1, b.col1 from taba a, tabb b where trim(a.col1) = trim(b.col1) (+); select a.col1, b.col1 from taba a, tabb b where trim(a.col1) = trim(b.col1)
*ERROR at line 1:ORA-00933: SQL command not properly ended
SQL> select a.col1, b.col1 from taba a left outer join tabb b on trim(a.col1) = trim(b.col1) ;
COL1 COL1 -------------------- -------------------- A AC CD DB
SQL> select a.col1, b.col1 from taba a right outer join tabb b on trim(a.col1) = trim(b.col1) ;
COL1 COL1 -------------------- -------------------- A AC CD D E
I am using left outer join to fetch PRSN_KEY .I need to find null values in B.PRSN_KEY. I am using below query but its giving me 0 count.
select count(*) from ( Select A.PRSN_KEY AS AKEY,B.PRSN_KEY AS BKEY from CD03955P.H_CM_EEST_EEOR A LEFT JOIN CD03955P.H_CM_EEST_EEOR B ON A.PRSN_KEY =B.PRSN_KEY where A.CAT_ID=111 AND A.DATA_SOURCE='PEN_CO' AND B.CAT_ID = 1 and B.DATA_SOURCE ='PEN_EEST' AND B.CAT_CD IN ('ACTIVE','LOA','LOAWP','LOAMLP','LOAMLN') AND B.EFBEGDT < A.EFBEGDT ) where BKEY IS NULL
What I am trying to do is get my report to list every room in the table even if there is nothing scheduled in the room for the selected date. I add a command to the report to force the left outer join but I keep running into errors. This is how I have it worded:
SELECT "ROOM"."ROOM_ID", "PATIENT_CARE_EVENT"."OR_NUM" FROM "ROOM"."ROOM" LEFT OUTER JOIN "PATIENT_CARE_EVENT"."PATIENT_CARE_EVENT" ON "PATIENT_CARE_EVENT"."OR_NUM"="ROOM"."ROOM_ID" AND "PATIENT_CARE_EVENT"."PROCEDURE_DATE_DT" IN {?Start Date} TO {?End Date}
Someone else suggested that I change the IN/TO wording in the last line to BETWEEN/AND. When I do that it gives me an error stating that the table or view does not exist.
As I am doing a outer join, if the resource is not available on a particular day the resource_id is coming as NULL as it is not available. Is there any way to populate this NULL resource_id with the original resource_id as the resource_id is same for all the result set.
