F1 F2 F3
---------- ---------- ----------
1200015 0 1200.015
In above result F3 represent the actual result, which is nearest value where mod returns the 0, but i want nearest integer value which is 1206. how it is possible. In above case consider 1200 as Kgs and 45 as Grams.
Quote: I have a table(table name is names) with column as name(varchar) . I have the following data for name column.
Miss Mississ Mississipp
I would like to find a nearest match for Mississippi, that means sql should return row that contains Mississipp( Row #3)
If I try to find nearest match for Mississirr then sql should return row that has column value Mississ (Row#2) Is this possible ? Here is the code for table creation and data.
create table names (name varchar2(20));
insert into names values('Miss'); insert into names values('Mississ'); insert into names values('Mississipp'); commit;
The requirement is like I need to check a value between the above range low and high then round it to the nearest value.
Say, for example if I have 68 then the value is rounded to 63 else if 74 then 77 else if its in the middle of two values (70) then rounded to the highest value, here its 77.
I am using Oracle 12c Spatial and Graph and I would like to retrieve the nearest neighbors of a point from a dataset encoded according to GeoSPARQL.I have created a spatial index on the datatype geo:wktLiteral and I to the query so the optimizer pick a plan using the index RDF_V$GEO_IDX. The query I pose is the following:
I do not get any error but I do not get any results neither. However, there are a lot of points around POINT(22.39 38.25) in my dataset and if I remove the filter I get results.Do I use orageo:nearestNeighbor in a wrong way?
I have a field in a table that is declared in the CREATE statement as an INT datatype. However, when I query that table using vb.net, the value comes back as a decimal.
How do you declare a field in Oracle as a true integer data type?
Using Oracle SQL Developer 2.1.1.64 to run the queries & Oracle 11g.
I have two numbers in two colomns of an oracle table(colomn a & colomn b). I am trying to divide colomn a/colomn b and putting the results in colomn c & also in colomn d (all in the same table) using update commands
Eg: UPDATE MTOTABLE_PWELD pw SET pw.WELDO=(pw.pipe_length/12000);
But here is the real issue. In colomn d I only need the integer portion of the division value.
For example , when I divide colomn a/colomn b , let us assume that we are getting a value of 2.56. Then I want the value of 2 to go to colomn d.
I tried round((colomn a/colomn b),0). But it rounds off 2.56 to 3. I dont want that. I need the exact integer portion of the value to be seperated.
I have the following function that I am using as a template for any function that executes a select statement and return a single value as an output.
The function is working but I wanted to take an expert opinion if it can be optimized.
CREATE OR REPLACE FUNCTION AFESD.F_AGR_GET_AGREEMENT_SERIAL (I_NUMBER0 IN NUMBER, S_SUB_NUMBER VARCHAR2 DEFAULT NULL, I_TYPE_ID NUMBER)
[Code]....
In addition I want to use the parameter S_SUB_NUMBER that can be NULL and add it to the select statement of the cursor, but I dont know how to do that in one statement.
CURSOR C_AGREEMENT IS SELECT AGREEMENT_SERIAL FROM VW_AGR_AGREEMENT WHERE NUMBER0 = I_NUMBER0 AND TYPE_ID = I_TYPE_ID -->and sub_number is null; -->and sumb_number = s_sub_number
Recent events at work are forcing me to take a much closer look at hash joins in an attempt to understand them much deeper than just on the surface. But my question today is maybe simple. I have done lots of reading and can't for the life of me figure out how to get more memory to my HASH JOINS.
is there are way to get around this limit of 2GB on a box that has 64GB with some 20gb not in use?
1) my databases are all using workarea_size_policy=AUTO
2) I am not afraid to go back to =MANUAL and set my own work area sizes.
3) It seems I cannot set HASH_AREA_SIZE to more that about 2GB.
BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production PL/SQL Release 11.2.0.2.0 - Production CORE 11.2.0.2.0 Production TNS for Solaris: Version 11.2.0.2.0 - Production NLSRTL Version 11.2.0.2.0 - Production 18:40:31 SQL> alter session set hash_area_size = 6000000000 ; alter session set hash_area_size = 6000000000 * ERROR at line 1: ORA-02017: integer value required
I know there is a limit of about 2GB on my box for HASH_AREA_SIZE and setting it to 2GB works fine. But it is still not enough.
18:50:22 SQL> alter session set hash_area_size = 2147483647; Session altered. Elapsed: 00:00:00.23
is there are way to get around this limit of 2GB on a box that has 64GB with some 20gb not in use? Using hash_area_size and 2GB, I get better performance than with my current PGA_AGGREGATE_TARGET doing the allocation for me.
I think I'd like to get as much as 20GB to specific sessions for hash joins but maybe I am pipe dreaming?
NAME TYPE VALUE ------------------------------------ ----------- ------------------- _pga_max_size big integer 1258280K pga_aggregate_target big integer 6G
I'm currently doing migration from Oracle 10gR2 RDF to Oracle 11gR2 Semantic Technology.I followed the steps on the documentation and successfully created the network using the following:
----- EXECUTE SEM_APIS.CREATE_SEM_NETWORK('rdf_tblspace'); CREATE TABLE rdf_network_trace (id NUMBER, triple SDO_RDF_TRIPLE_S); --Created SEQUENCE andTRIGGER FOR rdf_network_trace id [code]....
when I looked at my Node Ids, they were like +635762253807433724+, +6118969225776891730+. The problem is, I am not the one who is assigning Node Ids, They were automatically generated when inserting TRIPLE data to the rdf table.
I have to update a table by getting values from two other tables. While doing that the inner query returns more than one value. I am not sure how to implement the logic without returning more than one row in sub query.
My query: update buf_office_str o set o.manager_ident = (select sp.ident from se2_r_src_sourceperson sp , (select distinct director_name, team_name from buf_sales_dump )t where SP.SRCNAME = upper(substr(t.director_name,instr(t.director_name,' ')+1,length(t.director_name))||', '||substr(t.director_name,1,instr(t.director_name,' ')-1 ) ) and o.office_descr = t.team_name )
Basically the query gets the manager id from sp table where sp.srcname = t.team-name. The office_descr should be equal to the team_name.
This is the logic I am working towards:
For each office, i get the office_descr and get corresponding team_name. Match the team's director_name (from table t) with the sp.name and return the employee's id (sp.ident) for that office_descr. I need to update all 50 offices with corresponding managerid for that office in buf_office_str table.
Is it possible to get done in one update? Or, does this need a plsql proc to do this logic.
I am returning the ORA-01427 after running the query below. why I am returning the error and how to address it.
select b.value , b.name, p.value ...... (case when p.value <> 'G2' then null else (select c.oldvalue from ad_changelog c where c.record_id = b.c_bpartner_id and c.ad_table_id = 291 and c.ad_column_id = 4216 ) end) as oldtradeName from c_bpartner b, zz_receipt r, zz_recp_alloc a, m_product p, ad_user us where a.c_bpartner_id = b.c_bpartner_id and a.zz_receipt_id = r.zz_receipt_id and us.ad_user_id = r.createdby and p.m_product_id = a.m_product_id
Just trying to update a table in which the sales amount is inserted when the sales amount is null.
I have
UPDATE ph2_customer_temp SET sales_amount = ( SELECT sl.sales_amount FROM PH2_CUSTOMER_TEMP pct join sales_limit sl on substr(pct.site_code,1,2) = sl.state where pct.credit_limit is null )
I can't seem to wrap my head around this problem I'm having with a query. I need to update all rows in my ps_ntsr_gf_stufile tables with the concatenated values from the ps_classes_tbl table where a.CLASS_NBR = b.CLASS_NBR. I tried to limit it to emplid from the ps_stdnt_enrl table but no luck.
UPDATE ps_ntsr_gf_stufile a SET a.CLASS_NAME = (SELECT CONCAT('SUBJECT', 'CATALOG_NBR') FROM PS_CLASS_TBL b WHERE a.CLASS_NBR = b.CLASS_NBR AND a.STRM = '1118' AND a.INSTITUTION = 'NT752') WHERE a.EMPLID IN (SELECT distinct EMPLID FROM PS_STDNT_ENRL);
/* (SELECT A.TOTAL_ALLOCATED_AMT FROM CLS_ALLOCATION_HDR@LAMS_PROD A WHERE A.APPROVAL_DATE BETWEEN BCTH.TRAN_FROM_DATE AND BCTH.TRAN_TO_DATE AND A.CUSTOMER_ID=BCTH.CUSTOMER_ID AND ALLOCATION_ID IN (SELECT ALLOCATION_ID FROM CLS_ALLOCATION_DTL@LAMS_PROD B WHERE ENTITY_TYPE='REC' AND B.ALLOCATION_ID=A.ALLOCATION_ID AND ENTITY_ID IN (SELECT RECEIPT_NO FROM CLS_RECEIPT_DTL@LAMS_PROD C WHERE B.ENTITY_ID=C.RECEIPT_NO AND RECEIPT_STATUS='A'))AND ALLOCATION_STATUS='A')*/
when i am trying to run this query i am getting an error'single row subquery returns more than one row'.
My problem : I Wrote a package(a function), this function just return a varchar2 , but in this function I wrote a cursor , when I call this function in this manner :
I have written the below sql select loc,(select ename from emp where emp.deptno = dept.deptno) from dept
It results in the below error.
[Error] Execution (1: 13): ORA-01427: single-row subquery returns more than one row
I have modified the SQL and got the required output select em.ename,dep.loc from (select loc,deptno from dept) dep , (select ename,deptno from emp) em where dep.deptno=em.deptno(+)
I have written the below sql to fetch all loc for emp which got executed
SELECT ENAME, (SELECT LOC FROM DEPT WHERE DEPT.DEPTNO=EMP.DEPTNO) LOC FROM EMP
But as i need all locations irrespective of any emp in the locaton so i tried to put emp side (+) which resulted in error.
What i'm trying to do is count the number of rows those sub-queries return.
As i understand it, that error happens when more than 1 row is returned.
Here is my query:
SQL> SELECT 2 a.ssg_nme, 3 b.sftw_prod_nme, 4 COUNT((SELECT db_srvr_id FROM inv.db_srvr_t WHERE node_id = (SELECT node_id FROM inv.node_t WH ERE node_loc_cde IN (5, 7, 8)))), 5 COUNT((SELECT db_srvr_id from inv.db_srvr_t WHERE row_status_cde = 2)), 6 COUNT((SELECT db_id from inv.db_t WHERE row_status_cde = 2 AND db_srvr_id = 1207)) 7 FROM 8 inv.cde_ssg_t a, inv.sftw_prod_t b, inv.db_srvr_t c, inv.appl_t d, inv.db_t e 9 WHERE d.appl_id = e.appl_id 10 AND e.db_srvr_id = c.db_srvr_id 11 AND d.appl_ssg_cde IN (6, 9) 12 GROUP BY b.sftw_prod_nme, a.ssg_nme; COUNT((SELECT db_id from inv.db_t WHERE row_status_cde = 2 AND db_srvr_id = 1207)) * ERROR at line 6: ORA-01427: single-row subquery returns more than one row
If it returns a value, I want to print the value returned; If it returns no value, I would like to return a string like 'NO_DATA'.
I have already tried several things, and the last one is: ================================================================== Select NVL2(dnh.DiaNoHableData, dnh.DiaNoHableData, 'NO_DATA') From (Select Dia_No_Habil || '#' || Trim(Descripcion) DiaNoHableData From Dias_no_Habiles Where Dia_No_Habil = To_Char(To_Date('20080704', 'YYYYMMDD'), 'YYYYMMDD')) dnh; ==================================================================
The subquery returns no data, so the first query should print 'NO_DATA', but it returns nothing.
